Fan Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fan Yang has a total of 133 co-authors. Here are the top co-authors by number of shared publications:
Huayan Yao
Hefei University of Technology
6 shared publications- Kang Liu
School of Civil Engineering, Hefei University of Technology, Hefei 230009, China
5 shared publications Ming Huang
Hefei University of Technology
5 shared publicationsPeng-Chao Hu
Department of Oncology, Xiangyang No. 1 People's Hospital, Hubei University of Medicine, Shiyan, Hubei 442000, P.R. China
5 shared publications- Guang Liu
School of Civil Engineering, Hefei University of Technology, Hefei, China
4 shared publications - Feng Xiong
College of Civil Engineering, Hefei University of Technology, Hefei, China
3 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (10)
Key parameters inversion and anti-scour performance of the 3D ecological mat for slope protection based on experimental study and numerical simulation
The three-dimensional (3D) ecological mat is a novel ecological slope protection technology. To investigate the anti-scour performance of this slope protection technology, scour experimental studies were conducted on the 3D ecological mat for slope protection specimens. A self-designed composite scour experimental flume and specimens were used. Scour depths were measured. A corresponding numerical model was established according to the experimental model. Parameter combination samples were constructed by using the orthogonal experimental design method, and the scour depth corresponding to each parameter sample was obtained via numerical simulation. Taking the calculated scour depth as input and the corresponding parameter combination as output, a training set of samples was built and a nonlinear mapping model was established using the radial basis function neural network. Based on the experimental study results, soil parameters were intelligently inverted and their accuracy verified. Furthermore, based on the inverted parameters, in-depth calculation and analysis were performed on the slope flow velocity field, scour morphology, and scour depth under different slope scour conditions. The results show that the 3D ecological mat for slope protection can effectively reduce the flow velocity; the scour depth accounts for 82% from the beginning to 1 h of scour, and the scour depth basically stabilizes after 2 h of scour.
- 1 October 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (10)
Open AccessKey parameters inversion and anti-scour performance of the 3D ecological mat for slope protection based on experimental study and numerical simulation
The three-dimensional (3D) ecological mat is a novel ecological slope protection technology. To investigate the anti-scour performance of this slope protection technology, scour experimental studies were conducted on the 3D ecological mat for slope protection specimens. A self-designed composite scour experimental flume and specimens were used. Scour depths were measured. A corresponding numerical model was established according to the experimental model. Parameter combination samples were constructed by using the orthogonal experimental design method, and the scour depth corresponding to each parameter sample was obtained via numerical simulation. Taking the calculated scour depth as input and the corresponding parameter combination as output, a training set of samples was built and a nonlinear mapping model was established using the radial basis function neural network. Based on the experimental study results, soil parameters were intelligently inverted and their accuracy verified. Furthermore, based on the inverted parameters, in-depth calculation and analysis were performed on the slope flow velocity field, scour morphology, and scour depth under different slope scour conditions. The results show that the 3D ecological mat for slope protection can effectively reduce the flow velocity; the scour depth accounts for 82% from the beginning to 1 h of scour, and the scour depth basically stabilizes after 2 h of scour.
- Open Access
Experimental Study and Numerical Simulation on Anti-Scouring Performance of 3D Ecological Protection Mat for Slope Protection
As an innovative ecological material widely adopted for surface protection of hydraulic soil–cement slope composites, 3D ecological slope protection mats remain insufficiently studied in terms of their anti-scour capacity under hydrodynamic erosion. This work combines physical model tests and numerical simulations to investigate its scour resistance, and adopts a radial basis function (RBF) neural network-based intelligent inversion method to calibrate numerical model parameters. Physical test results demonstrate that longer vegetation growing periods effectively strengthen slope anti-scouring performance. At 2 m/s flow velocity, extending the growth period from 2 months to 3 and 4 months increases bed shear stress of 3D ecological protection mat specimens by 41% and 19%, reduces soil loss by 49% and 33%, and decreases scour depth by 23% and 13%. Both scour depth and soil loss rise rapidly initially before leveling off, with larger ultimate values under higher flow velocities. The established numerical model achieves a 3.1% relative error between inverted and measured data, proving high inversion accuracy. Simulations under 1~5 m/s flow velocities reveal that flow velocity decreases significantly over the protected slope, and scour depth and scouring area expand gradually with increasing flow velocity.
Open AccessExperimental Study and Numerical Simulation on Anti-Scouring Performance of 3D Ecological Protection Mat for Slope Protection
As an innovative ecological material widely adopted for surface protection of hydraulic soil–cement slope composites, 3D ecological slope protection mats remain insufficiently studied in terms of their anti-scour capacity under hydrodynamic erosion. This work combines physical model tests and numerical simulations to investigate its scour resistance, and adopts a radial basis function (RBF) neural network-based intelligent inversion method to calibrate numerical model parameters. Physical test results demonstrate that longer vegetation growing periods effectively strengthen slope anti-scouring performance. At 2 m/s flow velocity, extending the growth period from 2 months to 3 and 4 months increases bed shear stress of 3D ecological protection mat specimens by 41% and 19%, reduces soil loss by 49% and 33%, and decreases scour depth by 23% and 13%. Both scour depth and soil loss rise rapidly initially before leveling off, with larger ultimate values under higher flow velocities. The established numerical model achieves a 3.1% relative error between inverted and measured data, proving high inversion accuracy. Simulations under 1~5 m/s flow velocities reveal that flow velocity decreases significantly over the protected slope, and scour depth and scouring area expand gradually with increasing flow velocity.
- 19 May 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (11)
Dynamic RUL prediction model for slope based on PSO-SVM deep fusion and bivariate Wiener-Copula adaptive network
To address the challenge of limited access to subsequent performance degradation data and remaining useful life (RUL) evolution for high-reliability, long-life water diversion channel slopes, this study proposes a dynamic slope RUL prediction model based on PSO-SVM deep fusion and bivariate Wiener-Copula adaptive network, which integrates multi-factor PSO-SVM displacement forecasting with a bivariate Wiener process and Copula function. First, rainfall, channel water level, and time-dependent effects are identified as key influencing factors, and a particle swarm optimization–support vector machine (PSO-SVM) model is developed to predict horizontal and vertical slope displacements. Second, a slope degradation model is established using the bivariate Wiener process, in which the nonlinear correlation between the two displacement components is characterized by a Copula function. Model parameters are estimated via the maximum likelihood method, the displacement threshold is determined through integration with the slope safety factor, and the slope lifetime distribution is subsequently derived. Finally, the proposed approach is validated using monitoring data from the water diversion channel slope at the Xinjiang Nileke No. 1 Hydropower Station. Results indicate that the Clayton Copula function achieves the best fitting performance, and the adaptive fusion network with predicted displacement values yields estimates that closely align with actual degradation trends and outperform conventional models in nonlinear characterization. Furthermore, the predicted RUL exhibits a gradual decline over time and enabling dynamic maintenance decision-making. The proposed model provides a scientific foundation for decision-makers to develop proactive and rational preventive maintenance strategies and fills the gap of dynamic RUL prediction for in-service long-life slopes with advanced network architecture.
- 19 May 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (11)
Dynamic RUL prediction model for slope based on PSO-SVM deep fusion and bivariate Wiener-Copula adaptive network
To address the challenge of limited access to subsequent performance degradation data and remaining useful life (RUL) evolution for high-reliability, long-life water diversion channel slopes, this study proposes a dynamic slope RUL prediction model based on PSO-SVM deep fusion and bivariate Wiener-Copula adaptive network, which integrates multi-factor PSO-SVM displacement forecasting with a bivariate Wiener process and Copula function. First, rainfall, channel water level, and time-dependent effects are identified as key influencing factors, and a particle swarm optimization–support vector machine (PSO-SVM) model is developed to predict horizontal and vertical slope displacements. Second, a slope degradation model is established using the bivariate Wiener process, in which the nonlinear correlation between the two displacement components is characterized by a Copula function. Model parameters are estimated via the maximum likelihood method, the displacement threshold is determined through integration with the slope safety factor, and the slope lifetime distribution is subsequently derived. Finally, the proposed approach is validated using monitoring data from the water diversion channel slope at the Xinjiang Nileke No. 1 Hydropower Station. Results indicate that the Clayton Copula function achieves the best fitting performance, and the adaptive fusion network with predicted displacement values yields estimates that closely align with actual degradation trends and outperform conventional models in nonlinear characterization. Furthermore, the predicted RUL exhibits a gradual decline over time and enabling dynamic maintenance decision-making. The proposed model provides a scientific foundation for decision-makers to develop proactive and rational preventive maintenance strategies and fills the gap of dynamic RUL prediction for in-service long-life slopes with advanced network architecture.
- 30 March 2026
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 85 (4) , 251
Mechanical characterization of red sandstone under point load, uniaxial compression, and Brazilian tensile tests
- 30 March 2026
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 85 (4) , 251
Mechanical characterization of red sandstone under point load, uniaxial compression, and Brazilian tensile tests
- Open Access
- 5 March 2026
- Published by Taylor & Francis in Journal of Asian Architecture and Building Engineering
- p. 1-18
Inversion analysis of HSS model parameters of foundation pits in sandy and gravel strata via gray correlation and GA–BP
1. With the continuous improvement in the utilization of urban underground space, together with the increasing scale of urban foundation pit engineering and the growing complexity of the surroundin...
- 5 March 2026
- Published by Taylor & Francis in Journal of Asian Architecture and Building Engineering
- p. 1-18
Open AccessInversion analysis of HSS model parameters of foundation pits in sandy and gravel strata via gray correlation and GA–BP
1. With the continuous improvement in the utilization of urban underground space, together with the increasing scale of urban foundation pit engineering and the growing complexity of the surroundin...
- Open Access
- 1 January 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (1)
Experimental study on the p -wave velocity characteristics of the cement-stabilized soil
Cement-stabilized soils, as a typical representative of soil improvement methods, significantly enhance the performance of soft soil. Since the demand for non-destructive assessment of the compressive and shear strength of cement-stabilized soil (CSS) is increasing rapidly, the ultrasonic wave velocity has been studied in this paper. In this work, many laboratory tests on the p-wave velocity (PWV) characteristics of the CSS were conducted. Through comprehensive tests, the PWV can generally reflect the unconfined compressive strength (UCS) and the shear strength (i.e., the cohesion and the internal friction angle) of the CSS. There is an exponential functional relationship between the UCS of the CSS and the PWV. Moreover, the internal friction angle also exhibits a good exponential functional relationship with the PWV, while the cohesion presents a good linear functional relationship with the PWV. These results prove the feasibility and effectiveness of this non-destructive testing method.
- 1 January 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (1)
Open AccessExperimental study on the p -wave velocity characteristics of the cement-stabilized soil
Cement-stabilized soils, as a typical representative of soil improvement methods, significantly enhance the performance of soft soil. Since the demand for non-destructive assessment of the compressive and shear strength of cement-stabilized soil (CSS) is increasing rapidly, the ultrasonic wave velocity has been studied in this paper. In this work, many laboratory tests on the p-wave velocity (PWV) characteristics of the CSS were conducted. Through comprehensive tests, the PWV can generally reflect the unconfined compressive strength (UCS) and the shear strength (i.e., the cohesion and the internal friction angle) of the CSS. There is an exponential functional relationship between the UCS of the CSS and the PWV. Moreover, the internal friction angle also exhibits a good exponential functional relationship with the PWV, while the cohesion presents a good linear functional relationship with the PWV. These results prove the feasibility and effectiveness of this non-destructive testing method.
- Open Access
Research on Automatic Recognition and Dimensional Quantification of Surface Cracks in Tunnels Based on Deep Learning
Cracks serve as a critical indicator of tunnel structural degradation. Manual inspections are difficult to meet engineering requirements due to their time-consuming and labor-intensive nature, high subjectivity, and significant error rates, while traditional image processing methods exhibit poor performance under complex backgrounds and irregular crack morphologies. To address these limitations, this study developed a high-quality dataset of tunnel crack images and proposed an improved lightweight semantic segmentation network, LiteSqueezeSeg, to enable precise crack identification and quantification. The model was systematically trained and optimized using a dataset comprising 10,000 high-resolution images. Experimental results demonstrate that the proposed model achieves an overall accuracy of 95.15% in crack detection. Validation on real-world tunnel surface images indicates that the method effectively suppresses background noise interference and enables high-precision quantification of crack length, average width, and maximum width, with all relative errors maintained within 5%. Furthermore, an integrated intelligent detection system was developed based on the MATLAB (R2023b) platform, facilitating automated crack feature extraction and standardized defect grading. This system supports routine tunnel maintenance and safety assessment, substantially enhancing both inspection efficiency and evaluation accuracy. Through synergistic innovations in lightweight network architecture, accurate quantitative analysis, and standardized assessment protocols, this research establishes a comprehensive technical framework for tunnel crack detection and structural health evaluation, offering an efficient and reliable intelligent solution for tunnel condition monitoring.
Open AccessResearch on Automatic Recognition and Dimensional Quantification of Surface Cracks in Tunnels Based on Deep Learning
Cracks serve as a critical indicator of tunnel structural degradation. Manual inspections are difficult to meet engineering requirements due to their time-consuming and labor-intensive nature, high subjectivity, and significant error rates, while traditional image processing methods exhibit poor performance under complex backgrounds and irregular crack morphologies. To address these limitations, this study developed a high-quality dataset of tunnel crack images and proposed an improved lightweight semantic segmentation network, LiteSqueezeSeg, to enable precise crack identification and quantification. The model was systematically trained and optimized using a dataset comprising 10,000 high-resolution images. Experimental results demonstrate that the proposed model achieves an overall accuracy of 95.15% in crack detection. Validation on real-world tunnel surface images indicates that the method effectively suppresses background noise interference and enables high-precision quantification of crack length, average width, and maximum width, with all relative errors maintained within 5%. Furthermore, an integrated intelligent detection system was developed based on the MATLAB (R2023b) platform, facilitating automated crack feature extraction and standardized defect grading. This system supports routine tunnel maintenance and safety assessment, substantially enhancing both inspection efficiency and evaluation accuracy. Through synergistic innovations in lightweight network architecture, accurate quantitative analysis, and standardized assessment protocols, this research establishes a comprehensive technical framework for tunnel crack detection and structural health evaluation, offering an efficient and reliable intelligent solution for tunnel condition monitoring.
- 12 August 2025
- Published by Geological Society of London in Quarterly Journal of Engineering Geology and Hydrogeology
- Vol. 58 (4)
Modelling the stress–strain curves of rocks using an improved spring model
Understanding the stress–strain behaviour of rocks is essential for ensuring the safe and stable operation of rock structures in engineering. The spring model is conceptually simple and can capture complete stress–strain curves, but the traditional form neglects the influence of confining pressure. In this study, an improved spring model is proposed that incorporates confining pressure effects through empirical relationships between model parameters and confining pressure. Implemented in MATLAB, the model successfully reproduces the stress–strain curves of red layer rocks under confining pressures of 1, 3 and 4 MPa, showing close agreement with experimental results in both the peak strength and post-peak behaviour. Parametric analysis reveals that the spring retention force factor primarily controls the post-peak stress drop, the diameter-to-height ratio influences the slope of the curve, and the mean maximum deformation determines the peak strength. Additionally, the model can simulate both Class I and Class II curves by adjusting the relative deformation capacities of the spring blocks, and it captures the transition from uniform to localized failure modes. These findings demonstrate that the improved spring model offers a simple yet effective tool for simulating rock mechanical behaviour under varying confining pressures.
- 12 August 2025
- Published by Geological Society of London in Quarterly Journal of Engineering Geology and Hydrogeology
- Vol. 58 (4)
Modelling the stress–strain curves of rocks using an improved spring model
Understanding the stress–strain behaviour of rocks is essential for ensuring the safe and stable operation of rock structures in engineering. The spring model is conceptually simple and can capture complete stress–strain curves, but the traditional form neglects the influence of confining pressure. In this study, an improved spring model is proposed that incorporates confining pressure effects through empirical relationships between model parameters and confining pressure. Implemented in MATLAB, the model successfully reproduces the stress–strain curves of red layer rocks under confining pressures of 1, 3 and 4 MPa, showing close agreement with experimental results in both the peak strength and post-peak behaviour. Parametric analysis reveals that the spring retention force factor primarily controls the post-peak stress drop, the diameter-to-height ratio influences the slope of the curve, and the mean maximum deformation determines the peak strength. Additionally, the model can simulate both Class I and Class II curves by adjusting the relative deformation capacities of the spring blocks, and it captures the transition from uniform to localized failure modes. These findings demonstrate that the improved spring model offers a simple yet effective tool for simulating rock mechanical behaviour under varying confining pressures.
- Open Access
Numerical Simulation of Impermeability of Composite Geomembrane in Rigid Landfills
To investigate the impermeability characteristics of composite geomembranes in rigid landfills, a three-dimensional finite element seepage analysis model, which incorporates a composite geomembrane, was established based on a case study of a rigid landfill project in Tongling. Utilizing the seepage mechanism of the composite geomembrane, the seepage distribution patterns of the hazardous waste leachate within the unit cell were computed under representative operating conditions. Different thickness amplification factor schemes for the equivalent treatment of the composite geomembrane were comparatively analyzed, considering both isotropic and anisotropic seepage conditions. The relationships between the seepage flow rate, velocity, and thickness amplification factor were determined. The results showed that the leachate experiences a rapid drop in the water head as it passes through the composite geomembrane, with a low seepage flow rate and velocity, highlighting the membrane’s significant impermeability effect. The finite element analysis indicated that thickness amplification of the composite geomembrane based on the flow equivalence is feasible to some degree, but treating the geomembrane as an anisotropic material during the equivalent process better approximates the actual conditions.
Open AccessNumerical Simulation of Impermeability of Composite Geomembrane in Rigid Landfills
To investigate the impermeability characteristics of composite geomembranes in rigid landfills, a three-dimensional finite element seepage analysis model, which incorporates a composite geomembrane, was established based on a case study of a rigid landfill project in Tongling. Utilizing the seepage mechanism of the composite geomembrane, the seepage distribution patterns of the hazardous waste leachate within the unit cell were computed under representative operating conditions. Different thickness amplification factor schemes for the equivalent treatment of the composite geomembrane were comparatively analyzed, considering both isotropic and anisotropic seepage conditions. The relationships between the seepage flow rate, velocity, and thickness amplification factor were determined. The results showed that the leachate experiences a rapid drop in the water head as it passes through the composite geomembrane, with a low seepage flow rate and velocity, highlighting the membrane’s significant impermeability effect. The finite element analysis indicated that thickness amplification of the composite geomembrane based on the flow equivalence is feasible to some degree, but treating the geomembrane as an anisotropic material during the equivalent process better approximates the actual conditions.
- 3 July 2025
- Published by Taylor & Francis in Journal of Microwave Power and Electromagnetic Energy
- Vol. 59 (3) , 197-217
Study on SCB test of different types of rocks under microwave irradiation
- 3 July 2025
- Published by Taylor & Francis in Journal of Microwave Power and Electromagnetic Energy
- Vol. 59 (3) , 197-217
Study on SCB test of different types of rocks under microwave irradiation