Vivek Kumar Srivastava
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vivek Kumar Srivastava has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Ashwani Sharma
Electrical Engineering Department, IIT Ropar, Rupnagar, Punjab, India
12 shared publications - Ananth Bharadwaj
Electrical and Electronics Engineering Department, Birla Institute of Technology and Science, Pilani, Dubai Campus, Dubai, United Arab Emirates
5 shared publications - Chandupatla Chakradhar Reddy
Department of Electrical Engineering, IIT Ropar, Rupnagar, Punjab, India
2 shared publications - Arhum Ahmad
Department of Electrical Engineering, Indian Institute of Technology Ropar, Rupnagar, Punjab, India
1 shared publication
Latest Publications
- 18 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (11) , 8590-8599
A Machine-Learning-Assisted Localization and Magnetic Field Forming for Wireless Powering of Biomedical Implant Devices
This article presents an array of overlapped coil transmitter antenna for localizing and generating desired magnetic beams toward the localized receiver to address misalignment problems in near-field wireless power transfer (WPT) applications. For this purpose, a time-divisional approach is employed to obtain the voltage samples from the moving receiver for predicting the position and orientation of the receiver using a machine-learning algorithm. In contrast, particle swarm optimization (PSO) is utilized to obtain the optimal current distribution to construct a magnetic beam in the receiver direction. The proposed transmitter is also optimized to attain a highly nonuniform magnetic field distribution to improve the localization sensitivity and generate a sharp magnetic beam toward the receiver. The proposed transmitter is fabricated using a high-frequency litz wire and excited using a single source of excitation and switching circuitry. The switching circuitry enables the extraction of voltage samples for localization purposes and constructs the desired magnetic beam. The performance of the fabricated prototype is measured experimentally, which corroborates with analytical results. The results demonstrate the potential of the proposed transmitter to achieve a misalignment-resilient WPT for charging small devices compatible with biomedical implants, wireless endoscopy capsules, and wearable devices.
- 18 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (11) , 8590-8599
A Machine-Learning-Assisted Localization and Magnetic Field Forming for Wireless Powering of Biomedical Implant Devices
This article presents an array of overlapped coil transmitter antenna for localizing and generating desired magnetic beams toward the localized receiver to address misalignment problems in near-field wireless power transfer (WPT) applications. For this purpose, a time-divisional approach is employed to obtain the voltage samples from the moving receiver for predicting the position and orientation of the receiver using a machine-learning algorithm. In contrast, particle swarm optimization (PSO) is utilized to obtain the optimal current distribution to construct a magnetic beam in the receiver direction. The proposed transmitter is also optimized to attain a highly nonuniform magnetic field distribution to improve the localization sensitivity and generate a sharp magnetic beam toward the receiver. The proposed transmitter is fabricated using a high-frequency litz wire and excited using a single source of excitation and switching circuitry. The switching circuitry enables the extraction of voltage samples for localization purposes and constructs the desired magnetic beam. The performance of the fabricated prototype is measured experimentally, which corroborates with analytical results. The results demonstrate the potential of the proposed transmitter to achieve a misalignment-resilient WPT for charging small devices compatible with biomedical implants, wireless endoscopy capsules, and wearable devices.
- 12 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 8 (4) , 363-371
An Optimized Switching Integrated Transmitter Pad for Generating Orthogonal H-Field Components to Localize Implanted Devices
This paper proposes an optimized switching integrated transmitter to generate highly non-uniform magnetic field (H-field) components for near-field localization applications. The localization accuracy of a magnetic-based localization system depends on the degree of non-uniformity present in the H-field distribution. Targeting this, several state-of-the-art designs presented eight spatially distributed transmitter structures. However, the absence of required H-field components at several receiver positions resulted in poor localization performance. To overcome this problem, an overlapping coil transmitter structure has been proposed in this work that spreads the H-field components at the receiver region. Further optimization of the transmitter coil design parameters is performed analytically to accomplish a highly non-uniform H-field at the receiver location and miniaturize the transmitter size. A time-divisional approach has been exploited and realized using a switching technique to acquire the required voltage samples at the receiver. The proposed transmitter is realized using a high-frequency Litz wire, and the switching is performed by adopting DPDT switches. The fabricated prototype is experimentally verified, and the measured results show a good agreement with the analytical result. This demonstrates the potential of the proposed transmitter for near-field localization applications such as the localization of biomedical implants, wireless endoscopy capsules, etc.
- 12 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 8 (4) , 363-371
An Optimized Switching Integrated Transmitter Pad for Generating Orthogonal H-Field Components to Localize Implanted Devices
This paper proposes an optimized switching integrated transmitter to generate highly non-uniform magnetic field (H-field) components for near-field localization applications. The localization accuracy of a magnetic-based localization system depends on the degree of non-uniformity present in the H-field distribution. Targeting this, several state-of-the-art designs presented eight spatially distributed transmitter structures. However, the absence of required H-field components at several receiver positions resulted in poor localization performance. To overcome this problem, an overlapping coil transmitter structure has been proposed in this work that spreads the H-field components at the receiver region. Further optimization of the transmitter coil design parameters is performed analytically to accomplish a highly non-uniform H-field at the receiver location and miniaturize the transmitter size. A time-divisional approach has been exploited and realized using a switching technique to acquire the required voltage samples at the receiver. The proposed transmitter is realized using a high-frequency Litz wire, and the switching is performed by adopting DPDT switches. The fabricated prototype is experimentally verified, and the measured results show a good agreement with the analytical result. This demonstrates the potential of the proposed transmitter for near-field localization applications such as the localization of biomedical implants, wireless endoscopy capsules, etc.
- 22 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 8 (1) , 59-67
A Coil Rectenna Array Design to Harvest All H-Field Components for Lateral Misalignment Tolerant Wireless Powering of Bio-Medical Implant Devices
This paper presents a coil rectenna array design to address the lateral misalignment problem in near-field wireless powering of biomedical implants and wearable devices. For this purpose, the proposed design comprises three non-identical orthogonal coil antennas optimized to harvest three orthogonal H-field components efficiently. The rectified energy generated by these antenna units is utilized to supply power to the load by combining the individual rectified output voltages. Out of the two distinct combining techniques, DC and AC combining, DC combining proved advantageous in effectively harnessing the lateral field components. The design parameters of the orthogonal coil rectennas are optimized to enhance the lateral misalignment tolerance area. To realize the proposed rectenna array, a multi-layer PCB technology is employed, resulting in a compact, robust, and cost-effective solution for wireless powering of biomedical implanted and wearable devices. Experimental validation of the analytical results demonstrates that the proposed design has the potential to significantly mitigate the lateral misalignment problem in a 2D plane, achieving a uniformity percentage of $\boldsymbol{38.18}$ % for a misalignment tolerance range of $60\times 60$ mm $^{2}$ .
- 22 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 8 (1) , 59-67
A Coil Rectenna Array Design to Harvest All H-Field Components for Lateral Misalignment Tolerant Wireless Powering of Bio-Medical Implant Devices
This paper presents a coil rectenna array design to address the lateral misalignment problem in near-field wireless powering of biomedical implants and wearable devices. For this purpose, the proposed design comprises three non-identical orthogonal coil antennas optimized to harvest three orthogonal H-field components efficiently. The rectified energy generated by these antenna units is utilized to supply power to the load by combining the individual rectified output voltages. Out of the two distinct combining techniques, DC and AC combining, DC combining proved advantageous in effectively harnessing the lateral field components. The design parameters of the orthogonal coil rectennas are optimized to enhance the lateral misalignment tolerance area. To realize the proposed rectenna array, a multi-layer PCB technology is employed, resulting in a compact, robust, and cost-effective solution for wireless powering of biomedical implanted and wearable devices. Experimental validation of the analytical results demonstrates that the proposed design has the potential to significantly mitigate the lateral misalignment problem in a 2D plane, achieving a uniformity percentage of $\boldsymbol{38.18}$ % for a misalignment tolerance range of $60\times 60$ mm $^{2}$ .
- 30 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (12) , 11434-11441
A Tilted-Orthogonal Receiver Coil Antenna to Improve Misalignment Tolerance in WPT Systems
This article proposes a novel receiver coil antenna to mitigate the lateral misalignment problem in resonant wireless power transfer (R-WPT) systems. The proposed design comprising two receiver coils is analytically optimized by parametric sweeping the tilt angle (θ). Consequently, the resultant structure is designated as a tilted-orthogonal receiver coil antenna with stable mutual inductance in the receiver active region. Therefore, regardless of the receiver misalignment, power transfer efficiency (PTE), realized using the circuit parameters, maintains its consistency. The analytical results of the proposed receiver coil antenna are experimentally verified. The misalignment tolerance of the proposed tilted-orthogonal receiver coil antenna is improved by 120.18% in terms of PTE compared with the conventional planar receiver coil antenna.
- 30 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (12) , 11434-11441
A Tilted-Orthogonal Receiver Coil Antenna to Improve Misalignment Tolerance in WPT Systems
This article proposes a novel receiver coil antenna to mitigate the lateral misalignment problem in resonant wireless power transfer (R-WPT) systems. The proposed design comprising two receiver coils is analytically optimized by parametric sweeping the tilt angle (θ). Consequently, the resultant structure is designated as a tilted-orthogonal receiver coil antenna with stable mutual inductance in the receiver active region. Therefore, regardless of the receiver misalignment, power transfer efficiency (PTE), realized using the circuit parameters, maintains its consistency. The analytical results of the proposed receiver coil antenna are experimentally verified. The misalignment tolerance of the proposed tilted-orthogonal receiver coil antenna is improved by 120.18% in terms of PTE compared with the conventional planar receiver coil antenna.
- 8 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (11) , 10261-10269
A Switched Planar Multicoil Transmitter Antenna Designed With Nonuniform H-Field Forming for Small Device Localization
To monitor 3-D position and orientation of a small device having planar receiver coil, a switched multi-coil transmitter antenna is proposed by adopting time-divisional approach. The existing multi-frequency methods require eight or more input ports to feed the coils with multi-frequency signals for localization. In contrast, the proposed transmitter antenna is driven by a single frequency source and uses only three input ports for reduced complexity. Moreover, the multiple coils of the proposed antenna are optimally grouped to form non-uniform magnetic-field distribution using three switches in such a manner that better localization accuracy is achieved as compared to the multi-frequency design. Rigorous analysis and simulations are performed to investigate the performance of the proposed design and localization approach. To validate the claim, experimental study results proved the potential of the proposed antenna employed for tracking a planar receiver in applications like medical robots, navigation of blind people, virtual reality, etc.
- 8 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (11) , 10261-10269
A Switched Planar Multicoil Transmitter Antenna Designed With Nonuniform H-Field Forming for Small Device Localization
To monitor 3-D position and orientation of a small device having planar receiver coil, a switched multi-coil transmitter antenna is proposed by adopting time-divisional approach. The existing multi-frequency methods require eight or more input ports to feed the coils with multi-frequency signals for localization. In contrast, the proposed transmitter antenna is driven by a single frequency source and uses only three input ports for reduced complexity. Moreover, the multiple coils of the proposed antenna are optimally grouped to form non-uniform magnetic-field distribution using three switches in such a manner that better localization accuracy is achieved as compared to the multi-frequency design. Rigorous analysis and simulations are performed to investigate the performance of the proposed design and localization approach. To validate the claim, experimental study results proved the potential of the proposed antenna employed for tracking a planar receiver in applications like medical robots, navigation of blind people, virtual reality, etc.
- 8 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (11) , 10294-10303
A Planar Switching Integrated Quadrant Coil Antenna to Form Widespread Switched Polarized H-Field for Misalignment Resilient WPT System
This paper presents a planar switching integrated quadrant coil antenna to mitigate lateral and angular misalignment problems in near-field wireless power transfer (WPT) applications. To allow a completely free receiver movement, both the misalignment problems are concurrently addressed by forming widespread distributions of switched polarized H-field in the receiver region. To achieve this, current circulations through the four quadrant coils composing the proposed antenna are judiciously controlled to form three orthogonal H-field components. For lateral misalignment mitigation, the widespread field distributions are obtained by using a field-forming approach for optimizing the antenna parameters. To produce the switched polarized H-field for angular misalignment mitigation, time-switching of the orthogonal H-field components is performed. This switching operation is realized by three DPDT switches inter-connecting the coils and integrated within the design for a cost-effective planar antenna solution. The fabricated prototype is measured and the experimental results are corroborated with the analysis. The results demonstrate potential of the proposed antenna to simultaneously mitigate both the misalignment problems for medium-range WPT of small devices which are allowed to freely rotate and displace such as medical implants, wireless endoscopy capsules and wearable devices etc.
- 8 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (11) , 10294-10303
A Planar Switching Integrated Quadrant Coil Antenna to Form Widespread Switched Polarized H-Field for Misalignment Resilient WPT System
This paper presents a planar switching integrated quadrant coil antenna to mitigate lateral and angular misalignment problems in near-field wireless power transfer (WPT) applications. To allow a completely free receiver movement, both the misalignment problems are concurrently addressed by forming widespread distributions of switched polarized H-field in the receiver region. To achieve this, current circulations through the four quadrant coils composing the proposed antenna are judiciously controlled to form three orthogonal H-field components. For lateral misalignment mitigation, the widespread field distributions are obtained by using a field-forming approach for optimizing the antenna parameters. To produce the switched polarized H-field for angular misalignment mitigation, time-switching of the orthogonal H-field components is performed. This switching operation is realized by three DPDT switches inter-connecting the coils and integrated within the design for a cost-effective planar antenna solution. The fabricated prototype is measured and the experimental results are corroborated with the analysis. The results demonstrate potential of the proposed antenna to simultaneously mitigate both the misalignment problems for medium-range WPT of small devices which are allowed to freely rotate and displace such as medical implants, wireless endoscopy capsules and wearable devices etc.
- 30 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (10) , 8911-8921
A Multicoil Array Transceiver Antenna Design for Touchless Hygienic Artificial Human Interfacing
This paper presents an optimized multi-coil array transceiver antenna design to localize the position of a human hand for a touchless artificial human interface. The functioning of the system is evolved from combined principles of a 2-coil and 3-coil magnetic resonance coupling based wireless power transfer techniques. The proposed system comprises of a transceiver antenna platform made of spatially distributed multi-coil arrays as transmitter and receiver antennas, and a resonator coil. The resonator coil attached to the fingertip of the user is localized by comparing the voltage gains of the receiver antenna array working as sensors with the decision thresholds. Therefore, the coil arrays of the transceiver platform and the resonator coil are jointly optimized to enhance the localization accuracy by maximizing the separation of receiver antenna readings from the decision thresholds. The fabricated prototype of the optimized antenna system is measured, and performance is analyzed for various movements of the user fingertip. The result reveal the decision threshold limits of the design for localization and prove that the proposed transceiver antenna system is able to track the human hand movement successfully. Unlike other vision and sensor-based interfacing, the proposed transceiver antenna system provides a cost-effective, user-friendly, and hygienic solution.
- 30 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (10) , 8911-8921
A Multicoil Array Transceiver Antenna Design for Touchless Hygienic Artificial Human Interfacing
This paper presents an optimized multi-coil array transceiver antenna design to localize the position of a human hand for a touchless artificial human interface. The functioning of the system is evolved from combined principles of a 2-coil and 3-coil magnetic resonance coupling based wireless power transfer techniques. The proposed system comprises of a transceiver antenna platform made of spatially distributed multi-coil arrays as transmitter and receiver antennas, and a resonator coil. The resonator coil attached to the fingertip of the user is localized by comparing the voltage gains of the receiver antenna array working as sensors with the decision thresholds. Therefore, the coil arrays of the transceiver platform and the resonator coil are jointly optimized to enhance the localization accuracy by maximizing the separation of receiver antenna readings from the decision thresholds. The fabricated prototype of the optimized antenna system is measured, and performance is analyzed for various movements of the user fingertip. The result reveal the decision threshold limits of the design for localization and prove that the proposed transceiver antenna system is able to track the human hand movement successfully. Unlike other vision and sensor-based interfacing, the proposed transceiver antenna system provides a cost-effective, user-friendly, and hygienic solution.
- 11 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (6) , 4234-4242
Switched Polarized H-Field Forming Using a Planar Switchable Double-Dumbbell Coil Antenna for Orientation-Oblivion Wireless Power Transfer
A planar switchable multicoil transmitter (Tx) antenna is presented to eliminate angular misalignment problems in near-field wireless power transfer (WPT) applications. To power the receiver (Rx) antenna in any orientation, the previous methods of 3-D rotating $H$ -field forming required complex feeding with multiple modulated sources. As an alternate, a switched polarized $H$ -field is proposed, which conjoins the field-forming technique with switching control to exploit the orthogonal field components using a single excitation source. The switching periods and the corresponding $H$ -field components are controlled to satisfy analytically derived constraints for complete mitigation of the angular misalignment problem. To generate this switched polarized $H$ -field, the proposed antenna comprises planar single axial and double dumbbell coils optimized to provide a maximum ${S}21$ with the Rx coil such that a maximum link efficiency is obtained under the field constraint. The switching is integrated with the design using two single pole double throw (SPDT) switches and a planar cost-effective realization in printed circuit board (PCB) technology is achieved. The proposed approach and the antenna are experimentally validated and the results are corroborated showing a constant voltage induced in the Rx coil with a standard deviation of 0.0028 V. The results proved the potential of the proposed switchable Tx antenna generating switched polarized $H$ -field for orientation-oblivion WPT applications.
- 11 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (6) , 4234-4242
Switched Polarized H-Field Forming Using a Planar Switchable Double-Dumbbell Coil Antenna for Orientation-Oblivion Wireless Power Transfer
A planar switchable multicoil transmitter (Tx) antenna is presented to eliminate angular misalignment problems in near-field wireless power transfer (WPT) applications. To power the receiver (Rx) antenna in any orientation, the previous methods of 3-D rotating $H$ -field forming required complex feeding with multiple modulated sources. As an alternate, a switched polarized $H$ -field is proposed, which conjoins the field-forming technique with switching control to exploit the orthogonal field components using a single excitation source. The switching periods and the corresponding $H$ -field components are controlled to satisfy analytically derived constraints for complete mitigation of the angular misalignment problem. To generate this switched polarized $H$ -field, the proposed antenna comprises planar single axial and double dumbbell coils optimized to provide a maximum ${S}21$ with the Rx coil such that a maximum link efficiency is obtained under the field constraint. The switching is integrated with the design using two single pole double throw (SPDT) switches and a planar cost-effective realization in printed circuit board (PCB) technology is achieved. The proposed approach and the antenna are experimentally validated and the results are corroborated showing a constant voltage induced in the Rx coil with a standard deviation of 0.0028 V. The results proved the potential of the proposed switchable Tx antenna generating switched polarized $H$ -field for orientation-oblivion WPT applications.
- 6 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (4) , 2969-2978
A Planar Distributed Multicoil Antenna to Generate 3-D Ellipsoidally Polarized H-Field for Angular Misalignment Tolerant WPT System
This article presents 3-D polarized magnetic-field forming using a planar multicoil transmitter antenna for wireless power transfer (WPT) applications. Three orthogonal $H$ -field components resulting in optimized 3-D ellipsoidal polarization are generated to mitigate the angular misalignment problem by the proposed antenna. The analytical optimization of the 3-D polarized $H$ -field is presented, and its effect on induced voltage in the receiver coil is investigated. To achieve unconstrained induced voltage in the receiver independent of its angular movement, an optimized planar multicoil design is proposed for a maximum S21 between the transmitter and the receiver coil antennas. Unlike the 3-D transmitter designs available in the literature, the proposed antenna is a 2-D planar printed circuit board (PCB) design, therefore, represents a cost-effective solution and is suitable for various practical WPT applications. The analytical results of the design are verified experimentally. The result proves that the proposed antenna is able to completely mitigate the angular misalignment problem, which represents a potential planar antenna solution for orientation-insensitive WPT applications.
- 6 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (4) , 2969-2978
A Planar Distributed Multicoil Antenna to Generate 3-D Ellipsoidally Polarized H-Field for Angular Misalignment Tolerant WPT System
This article presents 3-D polarized magnetic-field forming using a planar multicoil transmitter antenna for wireless power transfer (WPT) applications. Three orthogonal $H$ -field components resulting in optimized 3-D ellipsoidal polarization are generated to mitigate the angular misalignment problem by the proposed antenna. The analytical optimization of the 3-D polarized $H$ -field is presented, and its effect on induced voltage in the receiver coil is investigated. To achieve unconstrained induced voltage in the receiver independent of its angular movement, an optimized planar multicoil design is proposed for a maximum S21 between the transmitter and the receiver coil antennas. Unlike the 3-D transmitter designs available in the literature, the proposed antenna is a 2-D planar printed circuit board (PCB) design, therefore, represents a cost-effective solution and is suitable for various practical WPT applications. The analytical results of the design are verified experimentally. The result proves that the proposed antenna is able to completely mitigate the angular misalignment problem, which represents a potential planar antenna solution for orientation-insensitive WPT applications.
- 29 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (4) , 2490-2498
A Switchable Multicoil Antenna With Booster Coil to Improve Coverage in WPT Systems
In this article, a planar distributed multicoil transmitter antenna is presented for wireless power transfer (WPT) applications. The proposed antenna is optimized to mitigate lateral misalignment problems and configured to operate in two different modes. The antenna switched to the normal mode excites a chief coil to form a concentrated $H$ -field within the perfectly aligned receiver area. Encircling the chief coil, a set of booster coils is incorporated in the design which is switched on in enhanced mode to stretch the $H$ -field uniformity whenever the receiver is misaligned. As a result, the proposed design evolves into a switchable planar distributed multicoil (SPDMC) antenna. Using a field forming technique based on a minimum mean square error algorithm, dimensional parameters of the proposed antenna are optimized. The proposed antenna improves stability in the power transfer efficiency which is verified by measuring the $S21$ parameter. The $S21$ stability achieved in the Rx working area is 98 $\times98$ mm 2 which corresponds to a 255% improvement over an existing design of the same dimension in the literature. The proposed SPDMC antenna is proven to be highly insensitive to lateral misalignment and a good antenna candidate for various short- and medium-range WPT applications.
- 29 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (4) , 2490-2498
A Switchable Multicoil Antenna With Booster Coil to Improve Coverage in WPT Systems
In this article, a planar distributed multicoil transmitter antenna is presented for wireless power transfer (WPT) applications. The proposed antenna is optimized to mitigate lateral misalignment problems and configured to operate in two different modes. The antenna switched to the normal mode excites a chief coil to form a concentrated $H$ -field within the perfectly aligned receiver area. Encircling the chief coil, a set of booster coils is incorporated in the design which is switched on in enhanced mode to stretch the $H$ -field uniformity whenever the receiver is misaligned. As a result, the proposed design evolves into a switchable planar distributed multicoil (SPDMC) antenna. Using a field forming technique based on a minimum mean square error algorithm, dimensional parameters of the proposed antenna are optimized. The proposed antenna improves stability in the power transfer efficiency which is verified by measuring the $S21$ parameter. The $S21$ stability achieved in the Rx working area is 98 $\times98$ mm 2 which corresponds to a 255% improvement over an existing design of the same dimension in the literature. The proposed SPDMC antenna is proven to be highly insensitive to lateral misalignment and a good antenna candidate for various short- and medium-range WPT applications.