SQShuai Qu

Shuai Qu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Shuai Qu has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Improvement of Spatial Resolution and Strain Measurement Range Based on Adaptive Matrix Block Weighting Method in Long-Distance OFDR System

    by Qihao Zhang, Shuai Qu, Xibao Gao, Shuo Bai, Chen Guan, Jiasheng Ni

    In this study, we present and experimentally verify a method based on the adaptive matrix block weighting (AMBW) algorithm to achieve large-strain measurement in long-distance, high-spatial-resolution optical frequency domain reflectometry (OFDR) systems. The system generates two-dimensional (2D) cross-correlation images representing strain information by calculating cross-correlations between the reference signals (RS) and measurement signals (MS) for each segment of the sensing fiber, thereby determining the strain distribution along the fiber. In practical applications, however, strain-induced stretching causes spatial misalignment between the measurement and reference signals. Consequently, the cross-correlation images become contaminated with bad points and outliers, leading to a significant reduction in measurement accuracy. To mitigate the above effects and enhance measurement accuracy, we employ the AMBW method to process the 2D cross-correlation images. Unlike conventional image denoising techniques such as Wiener filtering (WF), Gaussian filtering (GF), and median filtering (MF), the AMBW algorithm leverages both the redundancy and inherent correlation within the 2D cross-correlation data by adaptively adjusting the size of the matrix blocks used in similarity weighting based on the spatial distribution of local outliers. This adaptive capability allows it to effectively eliminate bad points and outlier. Experimental results show that the proposed method accurately measures strain gradients from 500 μϵ to 5500 μϵ with a spatial resolution of 2 mm, operating at a wavelength scanning rate of 10 nm/s over a 56 m sensing fiber. The proposed approach offers an effective solution for long-distance, high-spatial-resolution, large-strain measurement in OFDR systems, underscoring its strong potential and practical value.

  • Machine Learning Enhanced Single Crystal Fiber Fabrication via Laser Heated Pedestal Growth

    by Xibao Gao, Sichao Wang, Bo Liu, Xiao Liu, Shuai Qu, Chen Guan, Qinglan Wang

    This study introduces a machine learning (ML)-assisted framework for optimizing Proportional-Integral-Derivative (PID) coefficients, enabling stable, long-length single crystal fiber (SCF) fabrication via the Laser Heated Pedestal Growth (LHPG) technique. Compared with traditional curve-fitting methods, the proposed ML approach significantly enhances computational efficiency and achieves up to 20dB improvement in prediction accuracy, leading to notable improvements in SCF uniformity and achievable fiber length. The fabricated sapphire SCF demonstrates a length exceeding 3 m and an average diameter of $150~\mu $ m with fluctuations below $\pm 3~\mu $ m, validating the effectiveness of the ML model. Additionally, fundamental guidelines for optimizing PID coefficients in LHPG systems are provided. These results offer valuable insights for high-quality SCF fabrication and are expected to facilitate the production of improved fibers suitable for harsh environment sensing applications.


  • High Spatial Resolution and Wide Strain Measurement of Optical Frequency Domain Reflectometry Based on Correlation Spectrum Self-Compensation Method

    by Shuai Qu, Qihao Zhang, Shuo Bai, Chen Guan, Xibao Gao, Pengbo Jiang, Haifeng Qi, Ying Shang, Jingsheng Lv, Wenjie Jiang, et al.

    The strain measurement range of an optical frequency domain reflectometry (OFDR) system is constrained by spatial resolution, which is affected by shifts in the distance domain. In this paper, a novel correlation spectrum self-compensation scheme based the reference signal is introduced, which improves the alignment between the reference and measurement signals along the sensing fiber. This contrasts with traditional cross-correlation by directly analyzing the spectrum shifts between the reference and measurement signals. The spatial mismatch caused by overstretching of the fiber can be suppressed with the spatial moving of the reference signal so that the trade-off between spatial resolution and wide strain measurement range can be overcame. Experimental results demonstrate a strain gradient range from 1000 μϵ to 10000 μϵ free of outliers with a spatial resolution of 2 mm. The proposed method offers a new approach to simultaneously achieve wide strain measurement and high spatial resolution in OFDR systems. This marks a significant step forward in high-performance distributed strain sensing system, particularly for applications requiring both broad strain measurement and enhanced spatial resolution.


  • Coherent fading suppression of distributed acoustic sensing based on time–frequency domain linkage algorithm

    by Shuai Qu, Meikun Wang, Sihan Ding, Ying Shang, Guangqiang Liu, Fengming Mou, Hong Zhao, Jiasheng Ni

    Due to the inherent characteristic of coherent fading phenomenon, the performance of distributed acoustic sensing system will be severely degraded, producing anomalous information and positioning errors. In order to suppress the influence of this phenomenon, the data array of demodulated results is obtained after processing the collected distributed Rayleigh scattering signals along the sensing fiber, which can be utilized to construct a two-dimension (2D) image with the time–distance domain information. Thus, this allows us to remove the abnormal information that are introduced by fading noise. Based on this principle, a morphology compositional analysis (MCA) scheme, an effective time–frequency domain linkage algorithm, is applied to the constructed 2D images to enhance the sensing accuracy. Compared with traditional methods including the 2D mean value filter (MVF) and 2D wavelet transform (WT), the proposed method makes full use of the independence of image source property and abnormity feature so that the abnormal information caused by the coherent fading can be eliminated without deteriorating the source information along the sensing fiber. Experimental results show that the anomaly rate of the time–distance domain information along the sensing fiber for the proposed method, the MVF method and the WT method can be reduced by 92.43%, 65.05% and 70.18% respectively. In addition, the isolation degree of the MCA, MVF and WT methods are 41, 16.02 and 23.35 times higher than that treated by traditional method, respectively. Also, the stability of the time-domain vibration can be improved and the spatial resolution would not be influenced by the proposed method compared with the traditional method. This scheme will promote the development of distributed acoustic sensor system with high-accuracy and high-quality without any hardware modification.


  • Multichannel Hybrid Parallel Classification Network Based on Siamese Network for the DAS Event Recognition System

    by Jiawen Wang, Sheng Huang, Chen Wang, Shuai Qu, Weitao Wang, Guangqiang Liu, Chunmei Yao, Na Wan, Xianggui Kong, Hong Zhao, et al.

    During the process of monitoring conveyor belt faults in underground coal mines, issues such as false alarms and low recognition rates arise. This was attributed to the extended monitoring distance of the belt conveyors, strong electromagnetic interference, and high environmental noise during the monitoring. Simultaneously, interference from other events can occur when a specific event is being monitored. To address this issue, the present study proposes a Siamese recognition network based on a distributed acoustic sensor system, featuring a multi-channel hybrid parallel classification network (Si-MCHPCN). This network can accurately identify fault events even when they occur at different locations of the conveyor system.The experimental results show that an average accuracy of 94.8% can be achieved for the five event types. Compared to using the same feature extraction network, Si-MCHPCN improved the recognition accuracy by 9.5% and 11.6% compared to using a single-signal feature extraction network and by 36.7% compared to using a multi-channel parallel classification network alone. Finally, after applying the Siamese network to the multi-channel hybrid parallel classification network, not only did it improve recognition accuracy, but it also resolved the issue of inaccurate data labeling, further enhancing the data reliability.


  • Fully Distributed Multi-Channel Fiber-Optic Sensor for Simultaneous Relative Humidity and Temperature Measurement With Finer Gauge Length Based on Spatial-Domain Time-Delayed Multiplexing

    by Shuai Li, Haiyan Li, Xiyu Yang, Botong Zhang, Shuai Qu, Yanping Xu, Zhaojun Liu, Zengguang Qin

    In this study, a distributed multi-channel fiber-optic sensor for simultaneous measurement of relative humidity (RH) and temperature with finer gauge length based on spatial-domain time-delayed multiplexing is proposed and experimentally demonstrated. Simultaneous acquisition of multi-channel signals can be realized by reconfiguring the system layout in a spatial-domain time-delayed multiplexing manner by re-routing the Rayleigh backscattered signals for split-channel processing using only extra delay fibers and couplers instead of any optical switches extending the acquisition time or acquisition unit increasing the system cost. Sensing units comprised of copper (Cu)-coated fiber and polyimide (PI)-coated fiber are used to extract the changes of RH and temperature in the environment simultaneously thanks to the distinct sensitivities on RH and temperature of the two fibers. Experimental results show that the sensing system is able to realize multi-channel simultaneous measurement of RH and temperature with gauge length up to 10 mm. Besides, the system is proved to have excellent stability and reliability in high humidity environments. This novel and simple sensing technique for multi-channel dual-parameter simultaneous measurement will provide new ideas for development of economical, reliable, and practical RH and temperature sensing network.


  • High Spatial-Resolved φ-OTDR System Based on Differential Pulse Width Sequence Technique

    by Meikun Wang, Jikai Qu, Shuai Qu, Weitao Wang, Sheng Huang, Wenan Zhao, Chen Wang, Ying Shang, Jiasheng Ni

    The spatial-resolved capacity of a phase-sensitive optical time-domain reflectometry ( $\varphi $ -OTDR) is limited by the optical pulse width, which increases the localization errors when measuring vibrations with range shorter than that determined by the pulse width. To overcome this problem, a high spatial-resolved $\varphi $ -OTDR with a differential pulse width sequence is proposed. The centimeter spatial resolution sensing can be realized by using meter equivalent pulses. This scheme utilizes the time-domain waveform subtraction obtained from the same pulse repetition rate and different pulse widths to form the differential vibration information at each fiber location. First, we provide a comprehensive treatment to prove that the proposed scheme can improve the spatial-resolved capacity of the $\varphi $ -OTDR system. The spatial resolution of 1.08m for 60/50ns pulse sequence is realized with a 30cm vibration source. Second, in a further proof-of-concept experiment, the spatial resolution is achieved up to 0.55m with a 55/50ns pulse sequence. It is demonstrated that the ability of spatial-resolved is enhanced greatly without any hardware modifications, compared to that required in the conventional method. This method holds great significance in accurately locating vibration signals within the narrow range of the distributed vibration sensor.


  • Open Access

    Railway Intrusion Events Classification and Location Based on Deep Learning in Distributed Vibration Sensing

    by Jian Yang, Chen Wang, Jichao Yi, Yuankai Du, Maocheng Sun, Sheng Huang, Wenan Zhao, Shuai Qu, Jiasheng Ni, Xiangyang Xu, et al.

    With the rapid development of the high-speed railway industry, the safety of railway operations is becoming increasingly important. As a symmetrical structure, traditional manual patrol and camera surveillance solutions on both sides of the railway require enormous manpower and material resources and are highly susceptible to weather and electromagnetic interference. In contrast, a distributed fiber optic vibration sensing system can be continuously monitored and is not affected by electromagnetic interference to false alarms. However, it is still a challenge to identify the type of intrusion event along the fiber optic cable. In this paper, a railway intrusion event classification and location scheme based on a distributed vibration sensing system was proposed. In order to improve the accuracy and reliability of the recognition, a 1 DSE-ResNeXt+SVM method was demonstrated. Squeeze-and-excitation blocks with attention mechanisms increased the classification ability by sifting through feature information without being influenced by non-critical information, while a support vector machine classifier can further improve the classification accuracy. The method achieved an accuracy of 96.0% for the identification of railway intrusion events with the field experiments. It illustrates that the proposed scheme can significantly improve the safety of railway operations and reduce the loss of personnel and property safety.


  • Broadband Vibration Signal Measurement Based on Multi-Coset Sampling in Phase-Sensitive OTDR System

    by Shuai Li, Yanping Xu, Yuru Feng, Shuai Qu, Wenchen Yang, Zequn Wang, Zengguang Qin, Zhaojun Liu

    The frequency response of phase-sensitive optical time-domain reflectometry ( $\Phi $ -OTDR) is strictly limited by the repetition rate of the injected sampling pulses in conventional sensing scheme. To fully reconstruct an arbitrary vibration signal, the pulse repetition rate is required to be lower bounded by twice the maximum frequency of the vibration signal according to the Nyquist sampling theorem and at the same time upper bounded by the sensing fiber length to avoid generations of mixed Rayleigh backscattered signals from more than one optical pulse within the sensing fiber, making high-frequency vibration sensing over long distance impossible. In this work, we propose a novel method based on the serial multi-coset sampling (MCS) strategy which can recover sparse broadband vibration signals with sub-Nyquist sampling rates, which is thus able to break through the tradeoff between the measurable vibration frequency bandwidth and the sensing range. Pulses with non-uniform intervals are adopted to realize MCS for the Rayleigh backscattered lights along the entire sensing fiber rather than the traditional uniform pulse train. A continuous to finite (CTF) block is used to determine the active spectrum ranges of the sparse signal. By using a serial MCS sequence with an average sampling rate of 4.8 kHz, both a 4 kHz single-frequency sinusoidal signal and a 0.2 kHz bandwidth chirped signal with a center frequency of 4.6 kHz were sampled and recovered successfully in the simulation. In experiments, a single frequency vibration signal of 15 kHz and a chirped vibration signal with frequency ranging from 15 to 16 kHz were successfully identified and reconstructed over a sensing distance of 4 km using an average sampling rate of 21.6kHz, respectively, which however is not possible in conventional $\Phi $ -OTDR system. Furthermore, accurate identification of a broadband vibration signal with a maximum frequency of 6 kHz over a 10km-long sensing fiber shows that this method is also practically valid in long-distance sensing.


  • Internet of Things Infrastructure Based on Fast, High Spatial Resolution, and Wide Measurement Range Distributed Optic-Fiber Sensors

    by Shuai Qu, Zequn Wang, Zengguang Qin, Yanping Xu, Zhenhua Cong, Zhaojun Liu

    Information sensor can realize the ubiquitous connection between objects and humans by the distributed fiber-optic sensor array, i.e., emerging infrastructure for Internet of Things, in which optical frequency domain reflectometry (OFDR) with its high spatial resolution plays an important role in achieving intelligent perception and identification of the objects. However, given a certain fiber length, there are tradeoffs among the processing speed, the spatial resolution, and the strain measurement range. In this article, a time optimization interpolation method and a distance domain compensation method are reported and experimentally verified to break the aforementioned tradeoffs for the first time. First, a full theoretical analysis on how to reduce the interpolation number and the reason why it is difficult to achieve high spatial resolution and large strain measurement and how to resolve it is made. Second in the proof-of-concept experiment, measurements of large strains up to 10 000 $\boldsymbol{\mu } \boldsymbol{\varepsilon }$ are realized along the sensing fiber with a spatial resolution of 2 mm using a conventional OFDR system. Also, the processing time is shortened by 76 times compared with the traditional processing method. This article makes a significant step toward high-performance OFDR system with fast processing, high spatial resolution, and wide strain measurement.