Junhang Tian
Research Subjects
Junhang Tian has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Weidong Zhuang
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, No. 30 Xueyuan Road, Haidian District, Beijing 100083, China
7 shared publications Jihuan Xie
State Key Laboratory of Advanced Metallurgy
4 shared publicationsChengke Tan
State Key Laboratory of Advanced Metallurgy
3 shared publicationsGuantong Chen
National Engineering Research Center for Rare Earth GRINM Group Co. Ltd Beijing China
3 shared publicationsMin Cao
Xi’an Rare Metal Materials Institute Co. Ltd., Xi’an 710016, China
3 shared publicationsJianwei Wang
General Research Institute for Nonferrous Metals Beijing China
2 shared publications
Latest Publications
- 11 March 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (11) , 5463-5471
Realizing Broad Color Tunability and Enhanced Thermal Stability via Energy Transfer in Ce3+, Eu2+-Codoped Ca-α-Sialon Phosphors
Luminescent properties of phosphors can be modified and improved by constructing energy transfer. In this article, a series of Ce3+- and/or Eu2+-doped Ca-α-sialon phosphors were synthesized through the traditional solid-state reaction method. The construction of an efficient energy transfer enables the modulation of a wide range of light colors, thereby facilitating a gradual color change from blue-green (0.1844, 0.2535) to yellow (0.4282, 0.5051). Moreover, the codoping of Ce3+ enhances the luminescence intensity of Eu2+ by approximately 2.2 times. Within the experimental gradient, the energy-transfer efficiency can reach up to 58.7%, and the energy-transfer mechanism is a quadrupole-quadrupole interaction. Gaussian fitting of the emission spectrum of the codoped samples reveals that the intensities of the Eu2+ and Ce3+ emission peaks of the codoped samples at 423 K are 78 and 87% of those at room temperature, respectively. Moreover, the thermal stability of the characteristic peaks of Ce3+ in the codoped samples is significantly enhanced compared to those doped alone. These excellent properties highlight the potential application of CaSi9Al3ON15/Ce3+, Eu2+ phosphor in white light WLEDs.
- 11 March 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (11) , 5463-5471
Realizing Broad Color Tunability and Enhanced Thermal Stability via Energy Transfer in Ce3+, Eu2+-Codoped Ca-α-Sialon Phosphors
Luminescent properties of phosphors can be modified and improved by constructing energy transfer. In this article, a series of Ce3+- and/or Eu2+-doped Ca-α-sialon phosphors were synthesized through the traditional solid-state reaction method. The construction of an efficient energy transfer enables the modulation of a wide range of light colors, thereby facilitating a gradual color change from blue-green (0.1844, 0.2535) to yellow (0.4282, 0.5051). Moreover, the codoping of Ce3+ enhances the luminescence intensity of Eu2+ by approximately 2.2 times. Within the experimental gradient, the energy-transfer efficiency can reach up to 58.7%, and the energy-transfer mechanism is a quadrupole-quadrupole interaction. Gaussian fitting of the emission spectrum of the codoped samples reveals that the intensities of the Eu2+ and Ce3+ emission peaks of the codoped samples at 423 K are 78 and 87% of those at room temperature, respectively. Moreover, the thermal stability of the characteristic peaks of Ce3+ in the codoped samples is significantly enhanced compared to those doped alone. These excellent properties highlight the potential application of CaSi9Al3ON15/Ce3+, Eu2+ phosphor in white light WLEDs.
- 6 February 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (6) , 2758-2766
Tunable NIR Emission of Cr3+-Activated Double-Perovskite Tantalates and Improvement of Luminescence Properties via Codoping Yb3+
Broadband near-infrared (NIR) luminescent materials exhibit great potential in many fields including nondestructive examination, biological imaging, and night vision. Herein, the tunable NIR emission can be realized based on Sr2MTaO6:Cr3+ (M = Ga, Sc, In) tantalate phosphors with a double-perovskite structure, with the emission peak varying from 782 to 880 nm via cation modulation. Specifically, after being stimulated by a 460 nm blue light, the Sr2GaTaO6/Cr3+ phosphor demonstrates a broadband NIR emission with the full width at half-maximum (fwhm) over 180 nm, originating from two octahedral sites of Ga3+ and Ta5+ in Sr2GaTaO6 that can be occupied by Cr3+ ions. By using the Yb3+ codoping strategy, the efficient energy transfer process (Cr3+ → Yb3+) enables remarkable expansion of the fwhm to 304 nm and significant improvement in thermal stability due to the suppressive thermal quenching behavior of Cr3+ ions. Ultimately, by mixing the Sr2GaTaO6/Cr3+, Yb3+ phosphor with an epoxy adhesive and coating on a 460 nm blue LED chip, an NIR pc-LED device was successfully fabricated, and its prospective usage in nondestructive testing and night vision fields was evaluated. This work contributes to the exploration of blue light effectively stimulating broad-band NIR-emitting phosphors.
- 6 February 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (6) , 2758-2766
Tunable NIR Emission of Cr3+-Activated Double-Perovskite Tantalates and Improvement of Luminescence Properties via Codoping Yb3+
Broadband near-infrared (NIR) luminescent materials exhibit great potential in many fields including nondestructive examination, biological imaging, and night vision. Herein, the tunable NIR emission can be realized based on Sr2MTaO6:Cr3+ (M = Ga, Sc, In) tantalate phosphors with a double-perovskite structure, with the emission peak varying from 782 to 880 nm via cation modulation. Specifically, after being stimulated by a 460 nm blue light, the Sr2GaTaO6/Cr3+ phosphor demonstrates a broadband NIR emission with the full width at half-maximum (fwhm) over 180 nm, originating from two octahedral sites of Ga3+ and Ta5+ in Sr2GaTaO6 that can be occupied by Cr3+ ions. By using the Yb3+ codoping strategy, the efficient energy transfer process (Cr3+ → Yb3+) enables remarkable expansion of the fwhm to 304 nm and significant improvement in thermal stability due to the suppressive thermal quenching behavior of Cr3+ ions. Ultimately, by mixing the Sr2GaTaO6/Cr3+, Yb3+ phosphor with an epoxy adhesive and coating on a 460 nm blue LED chip, an NIR pc-LED device was successfully fabricated, and its prospective usage in nondestructive testing and night vision fields was evaluated. This work contributes to the exploration of blue light effectively stimulating broad-band NIR-emitting phosphors.
- 4 September 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (38) , 17418-17428
Achieving a Balance of Good Quantum Efficiency and Thermal Stability in the Y2CaScAl3GeO12:Cr3+ Broadband Phosphor for Multiple NIR Spectroscopy Applications
Near-infrared phosphor-converted light emitting diodes (NIR pc-LEDs) are considered as desirable NIR light sources to satisfy current needs owing to their numerous remarkable features. Nevertheless, as an essential component, previously reported NIR phosphors with broadband emission often suffer from inferior efficiency or thermal stability, therefore restricting their use and promotion. Herein, a novel Cr3+-doped garnet phosphor Y2CaScAl3GeO12:Cr3+ (YCSAG:Cr3+) is developed via regulating the near-neighbor coordination polyhedron. Under the excitation of blue light, it exhibits a broadband NIR emission peaking near 800 nm with a full width at half-maximum (fwhm) exceeding 150 nm, owing to the increased structural distortion of the octahedron. Particularly, due to the enhanced local structural rigidity induced by lattice shrinkage, the optimal sample achieves a balance of high internal quantum efficiency (IQE) of approximately 83% and thermal stability of approximately 90% at 393 K, facilitating its practical application as an NIR light source. Eventually, using the typical YCSAG:0.04Cr3+ phosphor and 450 nm blue LED chip, a high-performance NIR pc-LED device has been manufactured, demonstrating potential applications in anticounterfeiting and night vision.
- 4 September 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (38) , 17418-17428
Achieving a Balance of Good Quantum Efficiency and Thermal Stability in the Y2CaScAl3GeO12:Cr3+ Broadband Phosphor for Multiple NIR Spectroscopy Applications
Near-infrared phosphor-converted light emitting diodes (NIR pc-LEDs) are considered as desirable NIR light sources to satisfy current needs owing to their numerous remarkable features. Nevertheless, as an essential component, previously reported NIR phosphors with broadband emission often suffer from inferior efficiency or thermal stability, therefore restricting their use and promotion. Herein, a novel Cr3+-doped garnet phosphor Y2CaScAl3GeO12:Cr3+ (YCSAG:Cr3+) is developed via regulating the near-neighbor coordination polyhedron. Under the excitation of blue light, it exhibits a broadband NIR emission peaking near 800 nm with a full width at half-maximum (fwhm) exceeding 150 nm, owing to the increased structural distortion of the octahedron. Particularly, due to the enhanced local structural rigidity induced by lattice shrinkage, the optimal sample achieves a balance of high internal quantum efficiency (IQE) of approximately 83% and thermal stability of approximately 90% at 393 K, facilitating its practical application as an NIR light source. Eventually, using the typical YCSAG:0.04Cr3+ phosphor and 450 nm blue LED chip, a high-performance NIR pc-LED device has been manufactured, demonstrating potential applications in anticounterfeiting and night vision.
- Open Access
- 14 June 2024
- Published by American Diabetes Association in Diabetes
- Vol. 73 (Supplement)
1856-LB: Efficacy and Safety of Mazdutide in Chinese Participants with Overweight or Obesity (GLORY-1)
Introduction & Objective: To evaluate the efficacy and safety of mazdutide, a once-weekly GLP-1 and glucagon receptor dual agonist, in Chinese participants with overweight or obesity. Methods: In this phase 3 randomized, double-blind, placebo-controlled trial (NCT05607680), we assigned 610 Chinese adults with a BMI of 28 kg/m2 or more, or 24 kg/m2 or more and at least one weight-related comorbidity, in a 1:1:1 ratio to receive once-weekly, subcutaneous mazdutide 4 mg, 6 mg or placebo for 48 weeks. Co-primary endpoints were the percentage change in weight from baseline and a weight reduction of 5% or more at week 32. Results: At baseline, the mean body weight was 87.2 kg, the mean BMI was 31.1 kg/m2, and 83.1% of participants had a BMI of 28 kg/m2 or more. Mazdutide met co-primary endpoints and all key secondary endpoints, demonstrating superiority to placebo on body weight changes, weight-loss targets, and improvements on multiple cardiometabolic risk factors (Table). Mazdutide was well tolerated, with adverse events leading to treatment discontinuation reported in 1.5% of participants with mazdutide 4 mg, 0.5% with mazdutide 6 mg and 1.0% with placebo. The most frequently reported adverse events were gastrointestinal, mostly mild to moderate in severity. Conclusion: In Chinese adults with overweight or obesity, mazdutide provides significant reductions in body weight and cardiometabolic risk factors. Disclosure: L. Ji: None. H. Jiang: None. H. Li: None. J. Tian: None. D. Liu: None. Y. Zhao: None. J. Gu: None. Z. Liu: Employee; Innovent Biologics. H. Deng: Employee; Innovent. Y. Wang: Employee; Innoventbio. L. Li: Employee; innovent biologics. Stock/Shareholder; innovent biologics. L. Qian: Employee; Innoventbio.
- 14 June 2024
- Published by American Diabetes Association in Diabetes
- Vol. 73 (Supplement)
Open Access1856-LB: Efficacy and Safety of Mazdutide in Chinese Participants with Overweight or Obesity (GLORY-1)
Introduction & Objective: To evaluate the efficacy and safety of mazdutide, a once-weekly GLP-1 and glucagon receptor dual agonist, in Chinese participants with overweight or obesity. Methods: In this phase 3 randomized, double-blind, placebo-controlled trial (NCT05607680), we assigned 610 Chinese adults with a BMI of 28 kg/m2 or more, or 24 kg/m2 or more and at least one weight-related comorbidity, in a 1:1:1 ratio to receive once-weekly, subcutaneous mazdutide 4 mg, 6 mg or placebo for 48 weeks. Co-primary endpoints were the percentage change in weight from baseline and a weight reduction of 5% or more at week 32. Results: At baseline, the mean body weight was 87.2 kg, the mean BMI was 31.1 kg/m2, and 83.1% of participants had a BMI of 28 kg/m2 or more. Mazdutide met co-primary endpoints and all key secondary endpoints, demonstrating superiority to placebo on body weight changes, weight-loss targets, and improvements on multiple cardiometabolic risk factors (Table). Mazdutide was well tolerated, with adverse events leading to treatment discontinuation reported in 1.5% of participants with mazdutide 4 mg, 0.5% with mazdutide 6 mg and 1.0% with placebo. The most frequently reported adverse events were gastrointestinal, mostly mild to moderate in severity. Conclusion: In Chinese adults with overweight or obesity, mazdutide provides significant reductions in body weight and cardiometabolic risk factors. Disclosure: L. Ji: None. H. Jiang: None. H. Li: None. J. Tian: None. D. Liu: None. Y. Zhao: None. J. Gu: None. Z. Liu: Employee; Innovent Biologics. H. Deng: Employee; Innovent. Y. Wang: Employee; Innoventbio. L. Li: Employee; innovent biologics. Stock/Shareholder; innovent biologics. L. Qian: Employee; Innoventbio.
- 27 June 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (27) , 10772-10779
Near-Infrared LuCa2ScZrGa2GeO12:Cr3+ Garnet Phosphor with Ultra-broadband Emission for NIR LED Applications
Near-infrared phosphor-converted light-emitting diodes (NIR pc-LEDs), as a new generation of NIR lighting sources, have wide prospects in the areas of food analysis and biological and night vision imaging. Nevertheless, NIR phosphors are still limited by short-wave and narrowband emissions as well as low efficiency. Herein, a series of NIR phosphors, LuCa2ScZrGa2GeO12:Cr3+ (LCSZGG:Cr3+), with broadband emissions have been developed and first reported. At 456 nm excitation, the optimized LCSZGG:0.005Cr3+ phosphor represents an ultra-broadband emission within the range of 650-1100 nm, peaking near 815 nm with a full width at half maximum of 166 nm. Furthermore, the LCSZGG:0.005Cr3+ phosphor possesses good internal quantum efficiency of 68.75%, and its integrated emission intensity at 423 K still retains about 64.17% of that at room temperature. By combining the optimized sample with a blue chip, a NIR pc-LED device is fabricated, which has an excellent NIR output power of 37.88 mW with an NIR photoelectric conversion efficiency of 12.44% under a 100 mA driving current. The aforementioned results demonstrate that these LCSZGG:Cr3+ broadband NIR phosphors are expected as NIR light sources.
- 27 June 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (27) , 10772-10779
Near-Infrared LuCa2ScZrGa2GeO12:Cr3+ Garnet Phosphor with Ultra-broadband Emission for NIR LED Applications
Near-infrared phosphor-converted light-emitting diodes (NIR pc-LEDs), as a new generation of NIR lighting sources, have wide prospects in the areas of food analysis and biological and night vision imaging. Nevertheless, NIR phosphors are still limited by short-wave and narrowband emissions as well as low efficiency. Herein, a series of NIR phosphors, LuCa2ScZrGa2GeO12:Cr3+ (LCSZGG:Cr3+), with broadband emissions have been developed and first reported. At 456 nm excitation, the optimized LCSZGG:0.005Cr3+ phosphor represents an ultra-broadband emission within the range of 650-1100 nm, peaking near 815 nm with a full width at half maximum of 166 nm. Furthermore, the LCSZGG:0.005Cr3+ phosphor possesses good internal quantum efficiency of 68.75%, and its integrated emission intensity at 423 K still retains about 64.17% of that at room temperature. By combining the optimized sample with a blue chip, a NIR pc-LED device is fabricated, which has an excellent NIR output power of 37.88 mW with an NIR photoelectric conversion efficiency of 12.44% under a 100 mA driving current. The aforementioned results demonstrate that these LCSZGG:Cr3+ broadband NIR phosphors are expected as NIR light sources.
- 24 May 2023
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 106 (9) , 5392-5402
Efficient, stable, broadband cyan‐emitting Ca‐substituted Ba 9 Lu 2 Si 6 O 24 :Eu 2+ with multisite luminescence for NUV‐wLEDs
In order to develop an efficient and stable broadband cyan phosphor for full spectrum white lighting emitting diodes (wLEDs), novel Ba 9 Lu 2 Si 6 O 24 :Eu 2+ , xCa 2+ is designed and synthesized. Ca‐substitution induces Eu 2+ ions into Lu 3+ crystallographic site, which achieve rare nonequivalent cation substitution of Eu 2+ . Effects of Ca‐substitution on crystal structure of matrix and phosphor are investigated by X‐ray photoelectron spectroscopy, X‐ray powder diffraction, transmission electron microscopy, and density functional thoery (DFT). Ba 9 Lu 2 Si 6 O 24 :Eu 2+ , xCa 2+ can be effectively excited by with near‐ultraviolet (NUV) and exhibit broadband cyan emission with full width at half maximum (FWHM) of 119.7 nm at x = 0.2, due to the multisite luminescence centers. For the sample x = 0.2, the internal quantum efficiency is 92.61%, and the luminous intensity at 423 K remains 89% of that measured at room temperature. The rigid structure of [SiO4]‐[LuO6]‐[SiO4] doped with Eu2+ ion makes Ca‐substituted samples exhibit excellent luminescence efficiency and thermal stability. Our work develops a significant strategy based on multisite cation regulation to explore NUV‐excited broadband cyan phosphors for full spectrum wLEDs.
- 24 May 2023
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 106 (9) , 5392-5402
Efficient, stable, broadband cyan‐emitting Ca‐substituted Ba 9 Lu 2 Si 6 O 24 :Eu 2+ with multisite luminescence for NUV‐wLEDs
In order to develop an efficient and stable broadband cyan phosphor for full spectrum white lighting emitting diodes (wLEDs), novel Ba 9 Lu 2 Si 6 O 24 :Eu 2+ , xCa 2+ is designed and synthesized. Ca‐substitution induces Eu 2+ ions into Lu 3+ crystallographic site, which achieve rare nonequivalent cation substitution of Eu 2+ . Effects of Ca‐substitution on crystal structure of matrix and phosphor are investigated by X‐ray photoelectron spectroscopy, X‐ray powder diffraction, transmission electron microscopy, and density functional thoery (DFT). Ba 9 Lu 2 Si 6 O 24 :Eu 2+ , xCa 2+ can be effectively excited by with near‐ultraviolet (NUV) and exhibit broadband cyan emission with full width at half maximum (FWHM) of 119.7 nm at x = 0.2, due to the multisite luminescence centers. For the sample x = 0.2, the internal quantum efficiency is 92.61%, and the luminous intensity at 423 K remains 89% of that measured at room temperature. The rigid structure of [SiO4]‐[LuO6]‐[SiO4] doped with Eu2+ ion makes Ca‐substituted samples exhibit excellent luminescence efficiency and thermal stability. Our work develops a significant strategy based on multisite cation regulation to explore NUV‐excited broadband cyan phosphors for full spectrum wLEDs.
- Open Access
Recent Advances in Multi-Site Luminescent Materials: Design, Identification and Regulation
The development of novel phosphor materials with excellent performance and modification of their photoluminescence to meet the higher requirements for applications are the essential research subjects for luminescent materials. Multi-site luminescent materials with crystallographic sites for the activator ions that broaden the tunable range of luminescent spectra and even enhance the luminescent performance have attracted significant attention in the pursuit of high-quality luminescence for white light-emitting diodes. Here, we summarize multi-site luminescence characteristics based on the different kinds of host and activator ions, introduce the identifications of multi-site activator ions via optical analysis, provide a structural analysis and theoretical calculation methods, and introduce the regulation strategies and advance applications of multi-site phosphors. The review reveals the relationship between crystal structure and luminescent properties and discusses future opportunities for multi-site phosphors. This will provide guidance for the design and development of luminescent materials or other materials science.
Open AccessRecent Advances in Multi-Site Luminescent Materials: Design, Identification and Regulation
The development of novel phosphor materials with excellent performance and modification of their photoluminescence to meet the higher requirements for applications are the essential research subjects for luminescent materials. Multi-site luminescent materials with crystallographic sites for the activator ions that broaden the tunable range of luminescent spectra and even enhance the luminescent performance have attracted significant attention in the pursuit of high-quality luminescence for white light-emitting diodes. Here, we summarize multi-site luminescence characteristics based on the different kinds of host and activator ions, introduce the identifications of multi-site activator ions via optical analysis, provide a structural analysis and theoretical calculation methods, and introduce the regulation strategies and advance applications of multi-site phosphors. The review reveals the relationship between crystal structure and luminescent properties and discusses future opportunities for multi-site phosphors. This will provide guidance for the design and development of luminescent materials or other materials science.
- 12 January 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (3) , 1805-1815
Multisite Cation Regulation of Broadband Cyan-Emitting (Ba1–xSrx)9Lu2Si6O24/Eu2+ Phosphors for Full-Spectrum wLEDs
Developing broadband cyan-emitting phosphors is an essential issue to achieve high-quality full-spectrum phosphor-converted white light-emitting diodes. Multisite cation regulation to modify the photoluminescence spectrum is a valid way to achieve broadband emission for phosphors. The Ba9Lu2Si6O24 lattice with various cation sites for activator ions is a preferred host for broadband emitting phosphors. The preferential crystallographic sites of Eu2+ in the Ba9Lu2Si6O24 lattice are identified based on the crystal field theory, crystal structure, and bond indices (such as NAC and SBOs) of the cations. Sr substitution in Ba9Lu2Si6O24/Eu2+ phosphor affects the location of Eu2+ activator ions, which is investigated via the first-principles density functional theory calculations, Rietveld refinement, and luminescence decay curves, and results in the modification of luminescence properties and thermal stability. The Sr-substituted (Ba0.8Sr0.2)9Lu2Si6O24/Eu2+ sample exhibits a broadband emission spectrum peaked at 471 and 518 nm with a large full width half maximum of 139 nm, covering blue-cyan-green regions, which can be an excellent candidate as broadband cyan-emitting phosphors for high-quality full-spectrum wLEDs.
- 12 January 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (3) , 1805-1815
Multisite Cation Regulation of Broadband Cyan-Emitting (Ba1–xSrx)9Lu2Si6O24/Eu2+ Phosphors for Full-Spectrum wLEDs
Developing broadband cyan-emitting phosphors is an essential issue to achieve high-quality full-spectrum phosphor-converted white light-emitting diodes. Multisite cation regulation to modify the photoluminescence spectrum is a valid way to achieve broadband emission for phosphors. The Ba9Lu2Si6O24 lattice with various cation sites for activator ions is a preferred host for broadband emitting phosphors. The preferential crystallographic sites of Eu2+ in the Ba9Lu2Si6O24 lattice are identified based on the crystal field theory, crystal structure, and bond indices (such as NAC and SBOs) of the cations. Sr substitution in Ba9Lu2Si6O24/Eu2+ phosphor affects the location of Eu2+ activator ions, which is investigated via the first-principles density functional theory calculations, Rietveld refinement, and luminescence decay curves, and results in the modification of luminescence properties and thermal stability. The Sr-substituted (Ba0.8Sr0.2)9Lu2Si6O24/Eu2+ sample exhibits a broadband emission spectrum peaked at 471 and 518 nm with a large full width half maximum of 139 nm, covering blue-cyan-green regions, which can be an excellent candidate as broadband cyan-emitting phosphors for high-quality full-spectrum wLEDs.
- 9 September 2021
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 8 (22) , 4933-4954
Thermal stability of nitride phosphors for light-emitting diodes
Improving thermal stability of nitride phosphors has become an important material challenge. Our review describes three thermal phenomena, lists strategies for enhancing thermal stability of nitride phosphors, and discusses prospects in the future.
- 9 September 2021
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 8 (22) , 4933-4954
Thermal stability of nitride phosphors for light-emitting diodes
Improving thermal stability of nitride phosphors has become an important material challenge. Our review describes three thermal phenomena, lists strategies for enhancing thermal stability of nitride phosphors, and discusses prospects in the future.
- 1 June 2021
- Published by Elsevier in Journal of Rare Earths
- Vol. 39 (6) , 627-633
Blue-emitting Sr1-Ca Lu2O4:Ce3+ phosphors for high CRI white LEDs
- 1 June 2021
- Published by Elsevier in Journal of Rare Earths
- Vol. 39 (6) , 627-633
Blue-emitting Sr1-Ca Lu2O4:Ce3+ phosphors for high CRI white LEDs