Yong Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yong Yang has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Deqing Huang
Southwest Jiaotong University
4 shared publications - Xia Liu
School of Electrical Engineering and Electronic Information, Xihua University, Chengdu 610039, China
2 shared publications - Zuquan Wu
School of Electrical Engineering and Electronic Information, Xihua University, Chengdu, Sichuan, China
2 shared publications - Changlin Song
School of Mechanical Engineering, Xihua University, Chengdu 610039, China
1 shared publication - Chengxin Wang
Sichuan Chuanrun Co., Ltd., Chengdu, China
1 shared publication - Gen Qiu
School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu, China
1 shared publication
Latest Publications
- Open Access
- 26 January 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (3) , 1271
Adaptive Impedance Control of a Human–Robotic System Based on Motion Intention Estimation and Output Constraints
The rehabilitation exoskeleton represents a typical human–robot system featuring complex nonlinear dynamics. This paper is devoted to proposing an adaptive impedance control strategy for a rehabilitation exoskelton. The patient’s motion intention is estimated online by the neural network (NN) to cope with the intervention of the patient’s subjective motor awareness in the late stage of rehabilitation training. Due to the differences in impedance parameters for training tasks in individual patients and periods, the least square method was used to learn the impedance parameters of the patient. Considering the uncertainties of the exoskeleton and the safety of rehabilitation training, an adaptive neural network impedance controller with output constraints was designed. The NN was applied to approximate the unknown dynamics and the barrier Lyapunov function was applied to prevent the system from violating the output rules. The feasibility and effectiveness of the proposed strategy were verified by simulation.
- 26 January 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (3) , 1271
Open AccessAdaptive Impedance Control of a Human–Robotic System Based on Motion Intention Estimation and Output Constraints
The rehabilitation exoskeleton represents a typical human–robot system featuring complex nonlinear dynamics. This paper is devoted to proposing an adaptive impedance control strategy for a rehabilitation exoskelton. The patient’s motion intention is estimated online by the neural network (NN) to cope with the intervention of the patient’s subjective motor awareness in the late stage of rehabilitation training. Due to the differences in impedance parameters for training tasks in individual patients and periods, the least square method was used to learn the impedance parameters of the patient. Considering the uncertainties of the exoskeleton and the safety of rehabilitation training, an adaptive neural network impedance controller with output constraints was designed. The NN was applied to approximate the unknown dynamics and the barrier Lyapunov function was applied to prevent the system from violating the output rules. The feasibility and effectiveness of the proposed strategy were verified by simulation.
- 29 November 2024
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 113 (10) , 11631-11646
Adaptive iterative learning unified operation control for high-speed train considering electrical structure model and temperature compensation
- 29 November 2024
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 113 (10) , 11631-11646
Adaptive iterative learning unified operation control for high-speed train considering electrical structure model and temperature compensation
- 3 January 2024
- Published by Springer Nature in International Journal of Control, Automation, and Systems
- Vol. 22 (1) , 276-287
Position and Force Control of Bilateral Teleoperation Systems With Time-varying Delays Based on Force Estimation
- 3 January 2024
- Published by Springer Nature in International Journal of Control, Automation, and Systems
- Vol. 22 (1) , 276-287
Position and Force Control of Bilateral Teleoperation Systems With Time-varying Delays Based on Force Estimation
- Open Access
- 18 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (14) , 8294
Nonlinear-Observer-Based Neural Fault-Tolerant Control for a Rehabilitation Exoskeleton Joint with Electro-Hydraulic Actuator and Error Constraint
The rehabilitation exoskeleton is an effective piece of equipment for stroke patients and the aged. However, this complex human–robot system incurs many problems, such as modeling uncertainties, unknown human–robot interaction, external disturbance, and actuator fault. This paper addresses the adaptive fault-tolerant tracking control for a lower limb rehabilitation exoskeleton joint driven by an electro-hydraulic actuator (EHA). First, the model of the exoskeleton joint is built by considering the principle of the hydraulic cylinder and the servo valve. Then, a novel disturbance-observer-based neural fault-tolerant control scheme is proposed, where the neural network and disturbance observer are incorporated to reduce the influence of the the nonlinear uncertainties and disturbance. Meanwhile, a barrier Lyapunov function is constructed to ensure the stability of the closed-loop system. Finally, comparative simulations on an exoskeleton joint validate the effect of the proposed control scheme.
- 18 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (14) , 8294
Open AccessNonlinear-Observer-Based Neural Fault-Tolerant Control for a Rehabilitation Exoskeleton Joint with Electro-Hydraulic Actuator and Error Constraint
The rehabilitation exoskeleton is an effective piece of equipment for stroke patients and the aged. However, this complex human–robot system incurs many problems, such as modeling uncertainties, unknown human–robot interaction, external disturbance, and actuator fault. This paper addresses the adaptive fault-tolerant tracking control for a lower limb rehabilitation exoskeleton joint driven by an electro-hydraulic actuator (EHA). First, the model of the exoskeleton joint is built by considering the principle of the hydraulic cylinder and the servo valve. Then, a novel disturbance-observer-based neural fault-tolerant control scheme is proposed, where the neural network and disturbance observer are incorporated to reduce the influence of the the nonlinear uncertainties and disturbance. Meanwhile, a barrier Lyapunov function is constructed to ensure the stability of the closed-loop system. Finally, comparative simulations on an exoskeleton joint validate the effect of the proposed control scheme.
- Open Access
- 7 July 2023
- Published by MDPI AG in Electronics
- Vol. 12 (13) , 3000
Flocking Control for Cucker–Smale Model Subject to Denial-of-Service Attacks and Communication Delays
This paper examines the flocking control issue of the Cucker–Smale model in the presence of denial-of-service (DoS) attacks and communication delays. In the setting of DoS attacks, the attacker only obstructs the information communication between agents during the activation phases, while it concentrates on supplying its own energy during the dormancy phases. Furthermore, the communication delays are assumed to be time-varying and heterogeneous. Firstly, a general control input scheme that defends against DoS network attacks and communication delays is constructed. Secondly, on the basis of the presented control input and the properties of graph theory, the flocking control issue is equivalently transformed into a products convergence issue of infinite sub-stochastic matrices. Finally, an algebraic condition is obtained to formulate all the agents that asymptotically achieve the flocking behavior. Moreover, the obtained theoretical results are verified by a numerical example.
- 7 July 2023
- Published by MDPI AG in Electronics
- Vol. 12 (13) , 3000
Open AccessFlocking Control for Cucker–Smale Model Subject to Denial-of-Service Attacks and Communication Delays
This paper examines the flocking control issue of the Cucker–Smale model in the presence of denial-of-service (DoS) attacks and communication delays. In the setting of DoS attacks, the attacker only obstructs the information communication between agents during the activation phases, while it concentrates on supplying its own energy during the dormancy phases. Furthermore, the communication delays are assumed to be time-varying and heterogeneous. Firstly, a general control input scheme that defends against DoS network attacks and communication delays is constructed. Secondly, on the basis of the presented control input and the properties of graph theory, the flocking control issue is equivalently transformed into a products convergence issue of infinite sub-stochastic matrices. Finally, an algebraic condition is obtained to formulate all the agents that asymptotically achieve the flocking behavior. Moreover, the obtained theoretical results are verified by a numerical example.
- 10 December 2022
- Published by Springer Nature in International Journal of Control, Automation, and Systems
- Vol. 20 (12) , 4026-4036
Disturbance-observer-based Neural Sliding Mode Repetitive Learning Control of Hydraulic Rehabilitation Exoskeleton Knee Joint with Input Saturation
- 10 December 2022
- Published by Springer Nature in International Journal of Control, Automation, and Systems
- Vol. 20 (12) , 4026-4036
Disturbance-observer-based Neural Sliding Mode Repetitive Learning Control of Hydraulic Rehabilitation Exoskeleton Knee Joint with Input Saturation
- Open Access
- 11 November 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 3026
High Sensitivity of Ammonia Sensor through 2D Black Phosphorus/Polyaniline Nanocomposite
Recently, as a two-dimensional (2D) material, black phosphorous (BP) has attracted more and more attention. However, few efforts have been made to investigate the BP/polyaniline (PANI) nanocomposite for ammonia (NH3) gas sensors. In this work, the BP/PANI nanocomposite as a novel sensing material for NH3 detection, has been synthesized via in situ chemical oxidative polymerization, which is then fabricated onto the interdigitated transducer (IDTs). The electrical properties of the BP/PANI thin film are studied in a large detection range from 1 to 4000 ppm, such as conduction mechanism, response, reproducibility, and selectivity. The experimental result indicates that the BP/PANI sensor shows higher sensitivity and larger detection range than that of PANI. The BP added into PANI, that may enlarge the specific surface area, obtain the special trough structure for gas channels, and form the p–π conjugation system and p–p isotype heterojunctions, which are beneficial to increase the response of BP/PANI to NH3 sensing. Meanwhile, in order to support the discussion result, the structure and morphology of the BP/PANI are respectively measured by Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV−vis), transmission electron microscopy (TEM), and field emissions scanning electron microscopy (SEM). Moreover, the sensor shows good reproducibility, and fast response and recovery behavior, on NH3 sensing. In addition, this route may offer the advantages of an NH3 sensor, which are of simple structure, low cost, easy to assemble, and operate at room temperature.
- 11 November 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 3026
Open AccessHigh Sensitivity of Ammonia Sensor through 2D Black Phosphorus/Polyaniline Nanocomposite
Recently, as a two-dimensional (2D) material, black phosphorous (BP) has attracted more and more attention. However, few efforts have been made to investigate the BP/polyaniline (PANI) nanocomposite for ammonia (NH3) gas sensors. In this work, the BP/PANI nanocomposite as a novel sensing material for NH3 detection, has been synthesized via in situ chemical oxidative polymerization, which is then fabricated onto the interdigitated transducer (IDTs). The electrical properties of the BP/PANI thin film are studied in a large detection range from 1 to 4000 ppm, such as conduction mechanism, response, reproducibility, and selectivity. The experimental result indicates that the BP/PANI sensor shows higher sensitivity and larger detection range than that of PANI. The BP added into PANI, that may enlarge the specific surface area, obtain the special trough structure for gas channels, and form the p–π conjugation system and p–p isotype heterojunctions, which are beneficial to increase the response of BP/PANI to NH3 sensing. Meanwhile, in order to support the discussion result, the structure and morphology of the BP/PANI are respectively measured by Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV−vis), transmission electron microscopy (TEM), and field emissions scanning electron microscopy (SEM). Moreover, the sensor shows good reproducibility, and fast response and recovery behavior, on NH3 sensing. In addition, this route may offer the advantages of an NH3 sensor, which are of simple structure, low cost, easy to assemble, and operate at room temperature.
- 11 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Computing in Science & Engineering
- Vol. 21 (6) , 6-19
Output Feedback Repetitive Learning Control of an Electrohydraulic Actuator of a Lower Limb Rehabilitation Exoskeleton
This paper addresses the output feedback repetitive learning control of electro-hydraulic actuator of lower limb rehabilitation exoskeleton. A repetitive learning extended state observer (RLESO) is proposed to estimate the unmeasurable system states, mismatched modeling uncertainties as well as repetitive unknowns. Based on the backstepping technique and RLESO, an output feedback repetitive controller (OFRC) is developed to improve the tracking performance. Both the convergence of the RLESO and the stability of closed-loop system are proved in a Lyapunov way. The efficiencies of the proposed RLESO and OFRC are verified via simulation. It is worthwhile to highlight that the repetitive learning scheme is integrated into both the observer and controller design parts. In such way, the remarkable performances of the output tracking via OFRC and the estimations of unmeasurable states via RLESO can be ensured.
- 11 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Computing in Science & Engineering
- Vol. 21 (6) , 6-19
Output Feedback Repetitive Learning Control of an Electrohydraulic Actuator of a Lower Limb Rehabilitation Exoskeleton
This paper addresses the output feedback repetitive learning control of electro-hydraulic actuator of lower limb rehabilitation exoskeleton. A repetitive learning extended state observer (RLESO) is proposed to estimate the unmeasurable system states, mismatched modeling uncertainties as well as repetitive unknowns. Based on the backstepping technique and RLESO, an output feedback repetitive controller (OFRC) is developed to improve the tracking performance. Both the convergence of the RLESO and the stability of closed-loop system are proved in a Lyapunov way. The efficiencies of the proposed RLESO and OFRC are verified via simulation. It is worthwhile to highlight that the repetitive learning scheme is integrated into both the observer and controller design parts. In such way, the remarkable performances of the output tracking via OFRC and the estimations of unmeasurable states via RLESO can be ensured.