Umesh Kumar Sharma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Umesh Kumar Sharma has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Pradeep Kumar Garg
Department of Civil Engineering, Indian Institute of Technology Roorkee, Haridwar, India
4 shared publications - Aditya Kumar Thakur
Department of Civil Engineering, Indian Institute of Technology Roorkee, Haridwar, India
3 shared publications - Ishtiaq Ahmed
Department of Civil Engineering, Indian Institute of Technology, Roorkee, India
2 shared publications - Ishtiaq Ahmed
Department of Civil Engineering, Indian Institute of Technology, Roorkee, India
2 shared publications - Pritipadmaja Pritipadmaja
Department of Civil Engineering, Indian Institute of Technology Roorkee, Haridwar, India
2 shared publications - Shashank Chandra
Department of Civil Engineering, National Institute of Technology Agartala, Agartala, India
2 shared publications
Latest Publications
- 15 November 2025
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 10 (12) , 549
Real-time non-destructive monitoring of concrete curing and strength development using hyperspectral remote sensing
- 15 November 2025
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 10 (12) , 549
Real-time non-destructive monitoring of concrete curing and strength development using hyperspectral remote sensing
- 26 October 2025
- Published by Springer Nature in Materials and Structures
- Vol. 58 (9) , 1-27
Effect of corrosion on TMT bars: three-dimensional scanning and statistical analysis of mechanical degradation
- 26 October 2025
- Published by Springer Nature in Materials and Structures
- Vol. 58 (9) , 1-27
Effect of corrosion on TMT bars: three-dimensional scanning and statistical analysis of mechanical degradation
- Open Access
- 28 July 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-G-2, 71-78
Non-Destructive Evaluation of Cement Mortar Quality with Hyperspectral Remote Sensing Methods
Cement mortar is a fundamental material in construction, with its strength and durability influenced by mix proportions and curing conditions. This study investigates the spectral characteristics and compressive strength of cement mortar mixes with varying cement-to-sand ratios (1:3, 1:4, and 1:6) over curing periods of 7 and 14 days. Utilising an SVC HR-1024i field spectroradiometer, spectral reflectance measurements were conducted to assess the surface properties of mortar cubes, while compressive strength tests were performed using a Universal Testing Machine. Results demonstrate a strong correlation between mix composition, curing duration, and both reflectance and strength developed with time. Higher cement content resulted in increased compressive strength and reflectance, particularly on the top surfaces of the samples. Further, spectral reflectance values increased with curing time. It may indicate the influence of hydration and microstructural densification on surface characteristics. Overall, this research introduces spectral analysis as a non-destructive method for evaluating mortar quality. It also offers a practical alternative to hectic and time-consuming traditional strength testing approaches. By highlighting the significant differences in reflectance based on mix proportions and curing conditions, the findings can contribute to improved quality control in construction materials. It can promote further exploration of non-destructive testing methodologies in this field.
- 28 July 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-G-2, 71-78
Open AccessNon-Destructive Evaluation of Cement Mortar Quality with Hyperspectral Remote Sensing Methods
Cement mortar is a fundamental material in construction, with its strength and durability influenced by mix proportions and curing conditions. This study investigates the spectral characteristics and compressive strength of cement mortar mixes with varying cement-to-sand ratios (1:3, 1:4, and 1:6) over curing periods of 7 and 14 days. Utilising an SVC HR-1024i field spectroradiometer, spectral reflectance measurements were conducted to assess the surface properties of mortar cubes, while compressive strength tests were performed using a Universal Testing Machine. Results demonstrate a strong correlation between mix composition, curing duration, and both reflectance and strength developed with time. Higher cement content resulted in increased compressive strength and reflectance, particularly on the top surfaces of the samples. Further, spectral reflectance values increased with curing time. It may indicate the influence of hydration and microstructural densification on surface characteristics. Overall, this research introduces spectral analysis as a non-destructive method for evaluating mortar quality. It also offers a practical alternative to hectic and time-consuming traditional strength testing approaches. By highlighting the significant differences in reflectance based on mix proportions and curing conditions, the findings can contribute to improved quality control in construction materials. It can promote further exploration of non-destructive testing methodologies in this field.
- Open Access
- 28 July 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-G-2, 79-86
Evaluating Environmental Weathering Effects on White Portland Cement using Hyperspectral Reflectance Analysis
Cement is a primary binding material that plays a crucial role in construction. This study used hyperspectral reflectance analysis to investigate the spectral reflectance characteristics of White Portland Cement (WPC) exposed to environmental conditions. The observation was made over a 150-day period. The reflectance of cement samples was measured using a spectroradiometer that captures the reflectance value of 994 discrete wavelength range from 339.3 nm to 2516.8 nm. These data were processed to calculate differential and double differential curves. Statistical techniques like moving average and smooth spline interpolation were employed to remove local fluctuations and observe the changing trends in reflectance over time. The study results provide insight into the temporal changes in the surface properties of WPC. The analysis also revealed significant changes in reflectance over time. The mean reflectance decreased from 90.397 on Day 0 to 83.092 on Day 150, showing surface degradation with time. However, the standard deviation of the reflectance increased initially from 7.318 on Day 0 to 7.766 on Day 30, then stabilized at 6.763 by Day 120. It was further increased to 7.496 by Day 150. The differential and double differential curves also show significant variations. The differential reflectance attained its maximum value of 0.199 on Day 60, and the double differential reflected maximum changes at 0.031 on Day 60. These results highlight the dynamic interaction between WPC surfaces and various environmental factors. The observed decrease in reflectance over time suggests surface ageing and potential material degradation, as reduced reflectance may indicate increased porosity or surface roughness due to environmental exposure. Overall, this study can offer a valuable tool for assessing cement-based materials' long-term durability and performance in the construction industry.
- 28 July 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-G-2, 79-86
Open AccessEvaluating Environmental Weathering Effects on White Portland Cement using Hyperspectral Reflectance Analysis
Cement is a primary binding material that plays a crucial role in construction. This study used hyperspectral reflectance analysis to investigate the spectral reflectance characteristics of White Portland Cement (WPC) exposed to environmental conditions. The observation was made over a 150-day period. The reflectance of cement samples was measured using a spectroradiometer that captures the reflectance value of 994 discrete wavelength range from 339.3 nm to 2516.8 nm. These data were processed to calculate differential and double differential curves. Statistical techniques like moving average and smooth spline interpolation were employed to remove local fluctuations and observe the changing trends in reflectance over time. The study results provide insight into the temporal changes in the surface properties of WPC. The analysis also revealed significant changes in reflectance over time. The mean reflectance decreased from 90.397 on Day 0 to 83.092 on Day 150, showing surface degradation with time. However, the standard deviation of the reflectance increased initially from 7.318 on Day 0 to 7.766 on Day 30, then stabilized at 6.763 by Day 120. It was further increased to 7.496 by Day 150. The differential and double differential curves also show significant variations. The differential reflectance attained its maximum value of 0.199 on Day 60, and the double differential reflected maximum changes at 0.031 on Day 60. These results highlight the dynamic interaction between WPC surfaces and various environmental factors. The observed decrease in reflectance over time suggests surface ageing and potential material degradation, as reduced reflectance may indicate increased porosity or surface roughness due to environmental exposure. Overall, this study can offer a valuable tool for assessing cement-based materials' long-term durability and performance in the construction industry.
- Open Access
- 18 October 2024
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-4-2024, 15-20
Analysis of Cement properties using Hyperspectral Remote Sensing methods
Understanding building material properties can play a key role in analyzing the health of structural elements in buildings. However, the field and laboratory tests can be laborious, time-consuming, and cost-intensive. Generally, the standard tests employed for characterizing the material properties are destructive in nature, but in the recent past, non-destructive testing (NDT) has given us the ease of understanding the material properties. Hyperspectral remote sensing technology has been exploited as one of the NDT methods for assessing the properties of building components. This study aims to investigate the quality information about cement using the hyperspectral remote sensing method and correlate it with the results of traditional quality testing methods. The materials used in the experiments included Ordinary Portland Cement (OPC), Portland Pozzolana Cement (PPC), and White Portland Cement (WPC). The cement samples were studied and experimented with for the identification of their types, and their temporal variability and changes in their spectral properties on which the strength of the samples depended were further checked. The study concluded that for OPC, PPC, and WPC, the absorption range is 1970 nm to 2020 nm, which is mainly due to the presence of different chemical compounds in cement. Also, the spectral reflectance decreases with time, and it can be concluded that in the present work, the strength of cement decreases with the decrease in spectral reflectance. Hence, Cement properties can be found using hyperspectral remote sensing data.
- 18 October 2024
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-4-2024, 15-20
Open AccessAnalysis of Cement properties using Hyperspectral Remote Sensing methods
Understanding building material properties can play a key role in analyzing the health of structural elements in buildings. However, the field and laboratory tests can be laborious, time-consuming, and cost-intensive. Generally, the standard tests employed for characterizing the material properties are destructive in nature, but in the recent past, non-destructive testing (NDT) has given us the ease of understanding the material properties. Hyperspectral remote sensing technology has been exploited as one of the NDT methods for assessing the properties of building components. This study aims to investigate the quality information about cement using the hyperspectral remote sensing method and correlate it with the results of traditional quality testing methods. The materials used in the experiments included Ordinary Portland Cement (OPC), Portland Pozzolana Cement (PPC), and White Portland Cement (WPC). The cement samples were studied and experimented with for the identification of their types, and their temporal variability and changes in their spectral properties on which the strength of the samples depended were further checked. The study concluded that for OPC, PPC, and WPC, the absorption range is 1970 nm to 2020 nm, which is mainly due to the presence of different chemical compounds in cement. Also, the spectral reflectance decreases with time, and it can be concluded that in the present work, the strength of cement decreases with the decrease in spectral reflectance. Hence, Cement properties can be found using hyperspectral remote sensing data.
- Open Access
- 13 July 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (10) , 4499-4512
Calibration of Accelerated Corrosion Regime for Short Square RC Columns Reinforced with Polypropylene and/or Steel Fibers
- 13 July 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (10) , 4499-4512
Open AccessCalibration of Accelerated Corrosion Regime for Short Square RC Columns Reinforced with Polypropylene and/or Steel Fibers
- 26 January 2024
- Published by Springer Nature in Fire Technology
- Vol. 60 (3) , 1569-1607
Behaviour of Deteriorated Reinforced Concrete Columns under Elevated Temperatures
- 26 January 2024
- Published by Springer Nature in Fire Technology
- Vol. 60 (3) , 1569-1607
Behaviour of Deteriorated Reinforced Concrete Columns under Elevated Temperatures
- 10 August 2023
- Published by Springer Nature in Fire Technology
- Vol. 60 (4) , 2265-2295
Fire Performance of Corroded Reinforced Concrete Columns
- 10 August 2023
- Published by Springer Nature in Fire Technology
- Vol. 60 (4) , 2265-2295
Fire Performance of Corroded Reinforced Concrete Columns
- 11 November 2021
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 7 (1) , 1-11
Unified model using artificial neural network for high strength fibrous concrete subjected to elevated temperature
- 11 November 2021
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 7 (1) , 1-11
Unified model using artificial neural network for high strength fibrous concrete subjected to elevated temperature