Aleksandra Nechaeva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aleksandra Nechaeva has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandr G. Bulaev
Research Center of Biotechnology, Russian Academy of Sciences, 7/2 60-letiya Oktyabrya Ave., 117312 Moscow, Russia
4 shared publications - Vitaliy Melamud
Research Center of Biotechnology, Russian Academy of Sciences, 119071 Moscow, Russia
4 shared publications - Alena Artykova
Research Center of Biotechnology, Russian Academy of Sciences, 119071 Moscow, Russia
3 shared publications - Yuliya Elkina
Research Center of Biotechnology, Russian Academy of Sciences, 119071 Moscow, Russia
3 shared publications - A. Ya. Boduen
Saint Petersburg Mining University
2 shared publications - Aliya Yskak
Akhmet Baitursynuly Kostanay Regional University, 47A Baitursynov str., Kostanay 110000, Kazakhstan
2 shared publications
Latest Publications
- Open Access
The Development of Innovated Complex Process for Treatment of Old Flotation Tailings of Copper-Zinc Sulfide Ore
The possibility of selective Cu and Zn leaching from the sample of old pyrite tailings, which is one of the most widespread types of solid waste forming during non-ferrous metal production, using sulfuric acid solutions and water was studied. It was shown that water leaching provided selective extraction of Cu and Zn and comparatively low iron ion extraction. At the same time, acid leaching provided the obtainment of pregnant solutions with high ferric ion concentration, which can be used for oxidative leaching of substandard copper concentrates. Water and acid leaching also provided increased Au recovery by cyanidation. The results suggest that acid leaching can be an effective approach for processing old flotation tailings, which allows the extraction of base metals from these wastes and treating flotation tailings for subsequent cyanidation. Effective flotation treatment methods should also provide environmental load reduction, which is caused by the long-term storage of metal-bearing wastes.
Open AccessThe Development of Innovated Complex Process for Treatment of Old Flotation Tailings of Copper-Zinc Sulfide Ore
The possibility of selective Cu and Zn leaching from the sample of old pyrite tailings, which is one of the most widespread types of solid waste forming during non-ferrous metal production, using sulfuric acid solutions and water was studied. It was shown that water leaching provided selective extraction of Cu and Zn and comparatively low iron ion extraction. At the same time, acid leaching provided the obtainment of pregnant solutions with high ferric ion concentration, which can be used for oxidative leaching of substandard copper concentrates. Water and acid leaching also provided increased Au recovery by cyanidation. The results suggest that acid leaching can be an effective approach for processing old flotation tailings, which allows the extraction of base metals from these wastes and treating flotation tailings for subsequent cyanidation. Effective flotation treatment methods should also provide environmental load reduction, which is caused by the long-term storage of metal-bearing wastes.
- Open Access
- 28 July 2022
- Published by MDPI AG in Microbiology Research
- Vol. 13 (3) , 466-479
Options for Increasing the Rate of Bioleaching of Arsenic Containing Copper Concentrate
In the present work the effect of alkaline sulfide leaching (ASL) on the extraction of copper and zinc from low-grade copper concentrate containing chalcopyrite, tennantite, sphalerite, and pyrite during batch and continuous bioleaching experiments was studied. It was demonstrated that ASL and further bioleaching may be a promising approach for treatment of copper–zinc concentrates containing tennantite as this approach allows increasing copper extraction degree in comparison to one-stage bioleaching by 1.6–2.3 times. Thus, ASL was shown to be effective for pretreatment of tennantite containing concentrates to improve bioleaching for copper extraction. At the same time, ASL led to decrease in zinc extraction by 1.4–1.5 times. Therefore, the development of combined hydrometallurgical processes including ASL and bioleaching for effective metal leaching requires further studies to avoid negative effect on zinc extraction.
- 28 July 2022
- Published by MDPI AG in Microbiology Research
- Vol. 13 (3) , 466-479
Open AccessOptions for Increasing the Rate of Bioleaching of Arsenic Containing Copper Concentrate
In the present work the effect of alkaline sulfide leaching (ASL) on the extraction of copper and zinc from low-grade copper concentrate containing chalcopyrite, tennantite, sphalerite, and pyrite during batch and continuous bioleaching experiments was studied. It was demonstrated that ASL and further bioleaching may be a promising approach for treatment of copper–zinc concentrates containing tennantite as this approach allows increasing copper extraction degree in comparison to one-stage bioleaching by 1.6–2.3 times. Thus, ASL was shown to be effective for pretreatment of tennantite containing concentrates to improve bioleaching for copper extraction. At the same time, ASL led to decrease in zinc extraction by 1.4–1.5 times. Therefore, the development of combined hydrometallurgical processes including ASL and bioleaching for effective metal leaching requires further studies to avoid negative effect on zinc extraction.
- Open Access
Continuous Bioleaching of Arsenic-Containing Copper-Zinc Concentrate and Shift of Microbial Population under Various Conditions
The goal of this work was to study the bioleaching of arsenic-containing polymetallic concentrate that contained 6.2% Cu, 7.3% Zn and 1.7% As, depending on different temperatures and in the presence of CO2 and molasses in the medium, as well as the difference in the composition of microbial population formed under various conditions. A mixed population of moderately thermophilic and thermotolerant acidophilic microorganisms formed during the continuous bioleaching of copper concentrate was used as an inoculum. The experiments were carried out in a continuous mode in laboratory scale reactors, with a temperature range of 40 °C to 60 °C. To assess the effect of CO2 and molasses on metal leaching and microbial population composition, the experiments were carried out in three reactors: CO2 (~0.01 L/min) was supplied into the first reactor; 0.02% molasses were added to the pulp of the second reactor; and no additional carbon sources were supplied into the control reactor. The highest copper recovery (27%) was achieved at 50°C in the experiment with molasses, while the highest zinc recovery (82.1%) was reached at 45°C in the control experiment. Additional carbon sources affected the extraction of non-ferrous metals only at 60 °C and increased the extraction of copper and zinc by 12.6% and 24.2%, respectively. Both the temperature and carbon source used affected the microbial population composition. The main microbial genera revealed in the populations by next generation sequencing (NGS) were bacteria of the genera Sulfobacillus and Acidithiobacillus, as well as archaea of the genera Ferroplasma, Acidiplasma, and Cuniculiplasma. At low temperatures (40 and 45 °C), Acidithiobacillus, Sulfobacillus, and Ferroplasma predominated, while at temperatures 50–55 °C, the decrease in relative abundance of these genera occurred, and the predominance of Acidiplasma archaea was observed. The usage of both CO2 and molasses led to the increase in Sulfobacillus and Acidiplasma in relative abundance.
Open AccessContinuous Bioleaching of Arsenic-Containing Copper-Zinc Concentrate and Shift of Microbial Population under Various Conditions
The goal of this work was to study the bioleaching of arsenic-containing polymetallic concentrate that contained 6.2% Cu, 7.3% Zn and 1.7% As, depending on different temperatures and in the presence of CO2 and molasses in the medium, as well as the difference in the composition of microbial population formed under various conditions. A mixed population of moderately thermophilic and thermotolerant acidophilic microorganisms formed during the continuous bioleaching of copper concentrate was used as an inoculum. The experiments were carried out in a continuous mode in laboratory scale reactors, with a temperature range of 40 °C to 60 °C. To assess the effect of CO2 and molasses on metal leaching and microbial population composition, the experiments were carried out in three reactors: CO2 (~0.01 L/min) was supplied into the first reactor; 0.02% molasses were added to the pulp of the second reactor; and no additional carbon sources were supplied into the control reactor. The highest copper recovery (27%) was achieved at 50°C in the experiment with molasses, while the highest zinc recovery (82.1%) was reached at 45°C in the control experiment. Additional carbon sources affected the extraction of non-ferrous metals only at 60 °C and increased the extraction of copper and zinc by 12.6% and 24.2%, respectively. Both the temperature and carbon source used affected the microbial population composition. The main microbial genera revealed in the populations by next generation sequencing (NGS) were bacteria of the genera Sulfobacillus and Acidithiobacillus, as well as archaea of the genera Ferroplasma, Acidiplasma, and Cuniculiplasma. At low temperatures (40 and 45 °C), Acidithiobacillus, Sulfobacillus, and Ferroplasma predominated, while at temperatures 50–55 °C, the decrease in relative abundance of these genera occurred, and the predominance of Acidiplasma archaea was observed. The usage of both CO2 and molasses led to the increase in Sulfobacillus and Acidiplasma in relative abundance.
- Open Access
- 13 November 2021
- Published by MDPI AG in Microorganisms
- Vol. 9 (11) , 2350
Effect of Carbon Sources on Pyrite-Arsenopyrite Concentrate Bio-oxidation and Growth of Microbial Population in Stirred Tank Reactors
Tank bio-oxidation is a biohydrometallurgical technology widely used for metal recovery from sulfide concentrates. Since carbon availability is one of the key factors affecting microbial communities, it may also determine the rate of sulfide concentrate bio-oxidation. The goal of the present work was to evaluate the effect of carbon sources on the bio-oxidation of the concentrate containing 56% pyrite and 14% arsenopyrite at different temperatures (40 and 50 °C) in stirred tank reactors. CO2 was supplied into the pulp of the first reactor (about 0.01 L/min) and 0.02% (w/v) molasses was added to the pulp of the second one, and no additional carbon sources were used in the control tests. At 40 °C, 77% of pyrite and 98% of arsenopyrite were oxidized in the first reactor, in the second one, 73% of pyrite and 98% of arsenopyrite were oxidized, while in the control reactor, 27% pyrite and 93% arsenopyrite were oxidized. At 50 °C, in the first reactor, 94% of pyrite and 99% of arsenopyrite were oxidized, in the second one, 21% of pyrite and 94% of arsenopyrite were oxidized, while in the control reactor, 10% pyrite and 92% arsenopyrite were oxidized. The analysis of the microbial populations in the reactors revealed differences in the total number of microorganisms and their species composition. Thus, it was shown that the use of various carbon sources made it possible to increase the intensity of the concentrate bio-oxidation, since it affected microbial populations performing the process.
- 13 November 2021
- Published by MDPI AG in Microorganisms
- Vol. 9 (11) , 2350
Open AccessEffect of Carbon Sources on Pyrite-Arsenopyrite Concentrate Bio-oxidation and Growth of Microbial Population in Stirred Tank Reactors
Tank bio-oxidation is a biohydrometallurgical technology widely used for metal recovery from sulfide concentrates. Since carbon availability is one of the key factors affecting microbial communities, it may also determine the rate of sulfide concentrate bio-oxidation. The goal of the present work was to evaluate the effect of carbon sources on the bio-oxidation of the concentrate containing 56% pyrite and 14% arsenopyrite at different temperatures (40 and 50 °C) in stirred tank reactors. CO2 was supplied into the pulp of the first reactor (about 0.01 L/min) and 0.02% (w/v) molasses was added to the pulp of the second one, and no additional carbon sources were used in the control tests. At 40 °C, 77% of pyrite and 98% of arsenopyrite were oxidized in the first reactor, in the second one, 73% of pyrite and 98% of arsenopyrite were oxidized, while in the control reactor, 27% pyrite and 93% arsenopyrite were oxidized. At 50 °C, in the first reactor, 94% of pyrite and 99% of arsenopyrite were oxidized, in the second one, 21% of pyrite and 94% of arsenopyrite were oxidized, while in the control reactor, 10% pyrite and 92% arsenopyrite were oxidized. The analysis of the microbial populations in the reactors revealed differences in the total number of microorganisms and their species composition. Thus, it was shown that the use of various carbon sources made it possible to increase the intensity of the concentrate bio-oxidation, since it affected microbial populations performing the process.