BCBriana J. Claassen

Briana J. Claassen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Briana J. Claassen has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Modified Disease Risk Index for Hop Powdery Mildew

    by David H. Gent, Briana J. Richardson, Stephen T. Massie

    The hop powdery mildew fungus, Podosphaera macularis, has overcome host resistance when cultivars with a given form of genetic resistance are broadly deployed, as most recently experienced in the partially resistant hop cultivar Cascade. Hop is a long-lived perennial grown under production contracts; therefore, growers of Cascade hops must now manage powdery mildew because of contractual obligations. We developed and validated a modified powdery mildew risk index to aid in matching fungicide application intervals for foliar powdery mildew to weather favorability specifically for this cultivar. The modified risk index preserves the form and logic of the original hop powdery mildew risk index but lowers the cardinal temperature from 30 to 28°C and introduces a low-temperature rule that reduces estimated daily risk points when temperatures are ≤4°C for ≥2 h. During eight location-years of validation in commercial yards in Washington State, the modified disease risk index resulted in disease control comparable to fungicide applications made at regular intervals yet with up to two fewer applications in years predicted to be less favorable to powdery mildew. We separately evaluated the benefit of fungicide applications made after bloom for managing the cone phase of powdery mildew. In 5 years of studies, fungicide applications ceasing in mid-July yielded disease control and hop brewing quality metrics similar to applications made into mid-August. An effective and minimal input program for the cultivar Cascade can be achieved by adjusting fungicide application intervals appropriately in spring and omitting unnecessary fungicide applications 4 to 6 weeks before harvest. [ ] The author(s) have dedicated the work to the public domain under the Creative Commons CC0 “No Rights Reserved” license by waiving all of his or her rights to the work worldwide under copyright law, including all related and neighboring rights, to the extent allowed by law, 2025.


  • Detection of Podosphaera macularis in Air Samples by Quantitative PCR

    by David H. Gent, Nanci L. Adair, Ross J. Hatlen, Timothy D. Miles, Briana J. Richardson, Hannah M. Rivedal, Cameron Ross, Michele S. Wiseman

    Detection and quantification of pathogen propagules in the air or other environmental samples is facilitated by culture-independent assays. We developed a quantitative PCR assay for the hop powdery mildew fungus, Podosphaera macularis, for detection of the organism from air samples. The assay uses primers and a TaqMan probe designed to target species-specific sequences in the 28S large subunit of the nuclear ribosomal DNA. Analytical sensitivity was not affected by the presence of an exogenous internal control or potential PCR inhibitors associated with DNA extracted from soil. The level of quantification of the assay was between 200 and 350 conidia when DNA was extracted from a fixed number of conidia. The assay amplified all isolates of P. macularis tested and had minimal cross-reactivity with other Podosphaera species when assayed with biologically relevant quantities of DNA. Standard curves generated independently in two other laboratories indicated that assay sensitivity was qualitatively similar and reproducible. All laboratories successfully detected eight unknown isolates of P. macularis and correctly discriminated Pseudoperonospora humuli and a water control. The usefulness of the assay for air sampling for late-season inoculum of P. macularis was demonstrated in field studies in 2019 and 2020. In both years, airborne populations of P. macularis in hop yards were detected consistently and increased during bloom and cone development.


  • Characterization of Powdery Mildew Fungi Affecting Hemp in the Pacific Northwest

    by Hannah M. Rivedal, Michele S. Wiseman, Briana J. Richardson, Stephen T. Massie, Andrea R. Garfinkel, Cynthia M. Ocamb, David H. Gent


  • Impact of Infection Timing and Autumnal Fungicide Applications on Perennation of Pseudoperonospora humuli and Severity of Hop Downy Mildew

    by Briana Claassen, David H Gent

    Pseudoperonospora humuli, causal agent of hop downy mildew, is known to survive winter as systemic mycelium in the crown and developing buds of hop (Humulus lupulus). Field studies were conducted over three growing seasons to quantify the association of infection timing to overwintering of P. humuli and development of downy mildew. Cohorts of potted plants were inoculated sequentially from early summer to autumn, overwintered, and then evaluated for symptoms of systemic downy mildew in emerging shoots. Shoots with systemic P. humuli developed after inoculation at any time in the previous year, with the most severe disease typically resulting from inoculation in August. Independent of the timing of inoculation, diseased shoots emerged coincident with the emergence of healthy shoots, beginning as early as late February and continuing through late May to early June. Surface crown buds on inoculated plants exhibited internal necrosis associated with P. humuli at rates ranging from 0.3 to 1.2%, whereas P. humuli was detected by PCR on 7.8 to 17.0% of asymptomatic buds depending on the timing of inoculation and year. Four experiments were conducted to quantify the impact of foliar fungicides applied in autumn on downy mildew the following spring. There was a small reduction of disease in only one study. Together, these studies indicate that infection by P. humuli that leads to overwintering can occur over a broad period of time, but delaying infection until autumn tends to reduce disease levels in the following year. However, in established plantings, postharvest application of foliar fungicides appeared to have little impact on severity of downy mildew in the ensuring year.


  • Yard Age, Cultivar Susceptibility, and Spring Pruning Practices as Risk Factors for Overwintering of Podosphaera macularis on Hop

    by Robert W. Laurie, Briana J. Richardson, Cameron J. Ross, David H. Gent, Briana Claassen

    Hop powdery mildew, caused by Podosphaera macularis, may be initiated by sexual or asexual spores of the pathogen, but only asexual reproduction has been reported in the Pacific Northwest United St...


  • Identification of quantitative trait loci associated with R1-mediated resistance to powdery mildew and sex determination in hop (Humulus lupulus L.)

    by Joshua S. Havill, Briana J. Richardson, Charlie L. Rohwer, David H. Gent, John A. Henning, Gary J. Muehlbauer

    Key message Two QTL were identified using linkage mapping approaches, one on hop linkage group 3 (qHl_Chr3.PMR1) associated with powdery mildew resistance and a second on linkage group 10 (cqHl_ChrX.SDR1) associated with sex determination. Abstract Hop (Humulus lupulus L.) is a dioecious species cultivated for use in beer. Hop powdery mildew, caused by Podosphaera macularis, is a constraint in many growing regions. Thus, identifying markers associated with powdery mildew resistance and sex provides the opportunity to pyramid R-genes and select female plants as seedlings, respectively. Our objectives were to characterize the genetic basis of R1-mediated resistance in the cultivar Zenith which provides resistance to pathogen races in the US, identify quantitative trait loci (QTL) associated with R1 and sex, and develop markers for molecular breeding-based approaches. Phenotypic evaluation of the population indicated that R1-based resistance and sex are inherited monogenically. We constructed a genetic map using 1339 single nucleotide polymorphisms (SNPs) based upon genotype-by-sequencing of 128 F1 progeny derived from a Zenith × USDA 21058M biparental population. SNPs were assigned to 10 linkage groups comprising a map length of 1204.97 cM with an average density of 0.94 cM/marker. Quantitative trait locus mapping identified qHl_Chr3.PMR1, associated with R1 on linkage group 3 (LOD = 23.57, R2 = 57.2%), and cqHl_ChrX.SDR1, associated with sex on linkage group 10 (LOD = 5.42, R2 = 25.0%). Kompetitive allele-specific PCR (KASP) assays were developed for both QTL and assessed against diverse germplasm. Our results indicate that KASP markers associated with R1 may be limited to materials that are pedigree-related to Zenith, whereas markers associated with sex may be transferable across populations. The high-density map, QTL, and associated KASP markers will enable selecting for sex and R1-mediated resistance in hop.


  • A Quantitative PCR Assay for Detection and Quantification of Fusarium sambucinum

    by William J. Thomas, Theodora G. Borland, Darby D. Bergl, Briana J. Claassen, Timothy A. Flodquist, Alexandria S. Montgomery, Hannah M. Rivedal, James Woodhall, Cynthia M. Ocamb, David H. Gent

    Fusarium sambucinum is an ascomycete that has been isolated from a broad range of plant hosts, including hop (Humulus lupulus L.), where it acts as a causal agent of Fusarium canker, a disease that can impact cone quality and yield in severe cases. Current diagnostic methods rely on isolation of the fungus from plant tissue, a time- and resource-intensive process with limited sensitivity, complicated by the potential presence of other Fusarium spp. that have been reported on hop. Our objective was to develop a rapid and sensitive diagnostic tool to detect and quantify F. sambucinum in plant tissues. Using a modified random amplified polymorphic DNA PCR assay, we identified a F. sambucinum-specific marker that serves as the target in a TaqMan (hydrolysis) probe quantitative PCR (qPCR) assay that can be used to detect F. sambucinum DNA in a background of plant DNA. When used to screen 52 isolates of F. sambucinum and isolates representing 13 other Fusarium spp., the assay was robust in detecting F. sambucinum while discriminating between F. sambucinum and closely related Fusarium spp., including F. venenatum. Furthermore, this assay reliably detects as little as 1 pg of F. sambucinum DNA in a background of total DNA from plant tissue. Within-sample comparisons of this qPCR assay with traditional cultural isolation methods demonstrated the greater sensitivity of the qPCR-based method for detection of F. sambucinum. When used to screen 220 asymptomatic stem samples, the qPCR assay detected F. sambucinum in 100 samples (45.5%); by comparison, F. sambucinum was detected in only 3 samples (1.4%) by culturing methods. Moreover, quantification of F. sambucinum DNA was possible for 60 of these samples, indicating the utility of the qPCR assay for early detection. This assay should be useful in diagnostic and epidemiological applications to detect and quantify F. sambucinum from multiple hosts and environmental samples.


  • Temperature Influences on Powdery Mildew Susceptibility and Development in the Hop Cultivar Cascade

    by David H. Gent, Briana J. Claassen, Michele S. Wiseman, Sierra N. Wolfenbarger

    The hop cultivar ‘Cascade’ possesses partial resistance to powdery mildew (Podosphaera macularis) that can be overcome by recently emerged, virulent isolates of the fungus. Given that hop is a long-lived perennial and that brewers still demand Cascade, there is a need to better understand factors that influence the development of powdery mildew on this cultivar. Growth chamber experiments were conducted to quantify the effect of constant, transient, and fluctuating temperature on Cascade before, concurrent to, and after inoculation as contrasted with another powdery mildew-susceptible cultivar, ‘Symphony’. Exposure of plants to supraoptimal temperature (26 and 32°C) before inoculation led to more rapid onset of ontogenic resistance in intermediately aged leaves in Cascade as compared with Symphony. Cascade was overall less susceptible to powdery mildew when exposed to constant temperature ranging from 18 to 32°C directly after inoculation. However, cultivar also interacted with temperature such that proportionately fewer and smaller colonies developed on Cascade than Symphony at supraoptimal yet permissive temperatures for disease. When plants were inoculated and then exposed to high temperature, colonies became progressively more tolerant to temperatures of 26 to 30°C with increasing time from inoculation to exposure, as moderated by cultivar, the specific temperature, and their interaction. Subjecting plants to simulated diurnal temperature regimes at the time of inoculation or 24 h later indicated Cascade and Symphony responded proportionately similarly on days predicted to be marginally unfavorable or marginally favorable for powdery mildew, although Cascade was quantitatively less susceptible than Symphony. In sum, this research indicates that Cascade is overall less susceptible to powdery mildew than Symphony, and supraoptimal temperature before, concurrent to, or after infection may interact differentially to moderate disease risk in Cascade. Therefore, cultivar-specific risk assessments for powdery mildew appear warranted.


  • Fungicide Physical Mode of Action: Impacts on Suppression of Hop Powdery Mildew

    by Briana J. Claassen, Sierra N. Wolfenbarger, David H. Gent

    Understanding of the physical mode of action of fungicides allows more efficient and effective application and can increase disease control. Greenhouse and field studies were conducted to explore the preinfection and postinfection duration and translocative properties of fungicides commonly used to control hop powdery mildew, caused by Podosphaera macularis. In greenhouse studies, applications made 24 h before inoculation were almost 100% effective at suppressing powdery mildew, regardless of the fungicide evaluated. However, percentage control of powdery mildew based on the number of pathogen colonies per leaf varied significantly between fungicides with increasing time from inoculation to application, ranging from 50 to 100% disease control depending on the fungicide. Fluopyram or fluopyram + trifloxystrobin was particularly efficacious, suppressing nearly all powdery mildew development independent of application timing. In translocation studies, fluopyram and flutriafol were the most effective treatments in each of two separate experiments, resulting in zones of inhibition of 1,036 and 246.3 mm2, respectively, on adaxial leaf surfaces when a single droplet of each fungicide was applied to the abaxial surface of leaves. In field experiments, all fungicide treatments provided nearly complete control of powdery mildew infection when applied before inoculation. Levels of disease control decreased with time depending on treatment, showing trends similar to those observed in greenhouse studies. In the 2017 field experiments, high levels of disease control (>75%) were observed at postinoculation time points for all treatments tested, whereas the same fungicides were more sensitive to application timing in a different year. Findings from this research indicate that differences in efficacy between fungicides are small when applications are made preventively, but postinfection activity and translaminar movement of certain fungicides may render some more effective depending on application coverage and preexisting infection.


  • Black Leg and Chlorotic Leaf Spot Occurrence on Brassicaceae Crop and Weed Hosts

    by Briana J. Claassen, Pete A. Berry, William J. Thomas, Carol Mallory-Smith, Cynthia M. Ocamb

    Black leg (caused by Plenodomus lingam and P. biglobosus) and chlorotic leaf spot (caused by Pyrenopeziza brassicae) are economically important fungal diseases of Brassicaceae crops. Surveys of seed fields and weed hosts were conducted to understand the distribution and prevalence of these diseases in Oregon after black leg and chlorotic leaf spot outbreaks occurred in Brassicaceae crops in 2014. Postharvest black leg ratings were conducted in seed fields of canola, forage rape, and turnip in 2015 and 2016. The incidence of black leg was greater for turnip (51%) than for canola (29%) and forage rape (25%). The overall average disease incidence was greater for seed crops harvested in 2015 (46%) than for crops harvested in 2016 (28%). A disease survey of wild Brassicaceae plants was conducted along Interstate 5 in Oregon. Brassicaceae weed population sites were identified and 40 sites were sampled for these diseases. Black leg and chlorotic leaf spot were present in 60 and 45%, respectively, of the sampled sites. Both species of Plenodomus were detected in weed populations, with P. lingam being the predominant species recovered (95%). The northernmost sample site with black leg was <32 km from the Oregon–Washington border, and the southernmost site with black leg was within 32 km of the Oregon–California border. Chlorotic leaf spot was detected <32 km from the Oregon–Washington border, whereas the southernmost site where it was detected was approximately 164 km from the Oregon–California border. Based on this study, infected crop residues and weed hosts may facilitate the persistence and spread of these pathogens.