Dag Heinemann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Dag Heinemann has a total of 118 co-authors. Here are the top co-authors by number of shared publications:
- Timm Landes
Hannover Centre for Optical Technologies, Leibniz University Hannover, Hannover, Germany
7 shared publications Miroslav Zabic
Leibniz Univ. Hannover (Germany)
6 shared publicationsHans Bethge
Leibniz Univ. Hannover (Germany)
4 shared publicationsMarkus Schomaker
Laser Zentrum Hannover e.V., Department of Biomedical Optics, Hollerithallee 8, Hannover 30419, Germany
3 shared publicationsMitsuhiro Terakawa
Department of Electronics and Electrical Engineering, Keio University, Yokohama, Japan
3 shared publications- Tammo Ripken
Industrial and Biomedical Optics Department, Laser Zentrum Hannover e.V., Hannover, Germany
3 shared publications
Latest Publications
- Open Access
- 20 July 2026
- Published by Les Amis d'Acarologia in Acarologia
- Vol. 66 (Suppl) , 274
Influence of plant development stage on Tetranychus urticae performance and presymptomatic hyperspectral stress detection in cucumber
The two-spotted spider mite (Tetranychus urticae) is a major herbivorous pest in greenhouse and open-field cucumber production (Cucumis sativus), where early infestation detection is essential for effective biological control. Within the DHYNAmite project, funded by the German Federal Ministry of Research, Technology and Space, an integrated approach combines hyperspectral imaging (HSI) for hotspot detection with targeted release of beneficial arthropods via drones. Reliable hotspot detection requires identifying infestation independently of plant developmental stage. However, plant ontogeny may influence herbivore performance and plant physiological responses to feeding. Younger plants are often assumed to exhibit higher constitutive or induced resistance, potentially delaying visible symptoms and altering spectral stress signatures. We therefore hypothesize that (1) reproductive performance differs between plant developmental stages and (2) timing and intensity of hyperspectral stress detection depend on plant age, resulting in stage-specific differences in presymptomatic detectability. This study investigates whether cucumber developmental stage affects reproductive performance of T. urticae and whether presymptomatic detection is equally reliable in young and older plants. Cucumber plants were grown under controlled climate chamber conditions and examined at two developmental stages (1 and 2 months after sowing). Three leaf categories (young, intermediate, old) were selected per plant. In a standardized micro-infestation assay, three adult females were confined to defined leaf areas using glue rings to ensure uniform feeding conditions. Mite population size, egg production, and fecal deposition were recorded daily for seven days. Hyperspectral images of infested and control leaves were acquired daily. Reflectance spectra were extracted from defined regions of interest, and spectral data were statistically analyzed to test effects of plant developmental stage, leaf position, and time. Preliminary experiments show that reproductive performance of T. urticae varies between leaf positions, indicating ontogenetic differences in host plant suitability. These findings highlight plant developmental stage as a bottom-up factor in spider mite population development. We expect reproductive output and short-term population growth to differ between plant stages, with leaf position independently modulating performance under standardized conditions. Initial hyperspectral measurements reveal detectable spectral alterations prior to visible symptoms. The completed study will determine whether these responses depend on plant age. Overall, the results will advance understanding of ontogenetically driven variation in spider mite population dynamics and provide a basis for stage-adapted monitoring and early-detection strategies.
- 20 July 2026
- Published by Les Amis d'Acarologia in Acarologia
- Vol. 66 (Suppl) , 274
Open AccessInfluence of plant development stage on Tetranychus urticae performance and presymptomatic hyperspectral stress detection in cucumber
The two-spotted spider mite (Tetranychus urticae) is a major herbivorous pest in greenhouse and open-field cucumber production (Cucumis sativus), where early infestation detection is essential for effective biological control. Within the DHYNAmite project, funded by the German Federal Ministry of Research, Technology and Space, an integrated approach combines hyperspectral imaging (HSI) for hotspot detection with targeted release of beneficial arthropods via drones. Reliable hotspot detection requires identifying infestation independently of plant developmental stage. However, plant ontogeny may influence herbivore performance and plant physiological responses to feeding. Younger plants are often assumed to exhibit higher constitutive or induced resistance, potentially delaying visible symptoms and altering spectral stress signatures. We therefore hypothesize that (1) reproductive performance differs between plant developmental stages and (2) timing and intensity of hyperspectral stress detection depend on plant age, resulting in stage-specific differences in presymptomatic detectability. This study investigates whether cucumber developmental stage affects reproductive performance of T. urticae and whether presymptomatic detection is equally reliable in young and older plants. Cucumber plants were grown under controlled climate chamber conditions and examined at two developmental stages (1 and 2 months after sowing). Three leaf categories (young, intermediate, old) were selected per plant. In a standardized micro-infestation assay, three adult females were confined to defined leaf areas using glue rings to ensure uniform feeding conditions. Mite population size, egg production, and fecal deposition were recorded daily for seven days. Hyperspectral images of infested and control leaves were acquired daily. Reflectance spectra were extracted from defined regions of interest, and spectral data were statistically analyzed to test effects of plant developmental stage, leaf position, and time. Preliminary experiments show that reproductive performance of T. urticae varies between leaf positions, indicating ontogenetic differences in host plant suitability. These findings highlight plant developmental stage as a bottom-up factor in spider mite population development. We expect reproductive output and short-term population growth to differ between plant stages, with leaf position independently modulating performance under standardized conditions. Initial hyperspectral measurements reveal detectable spectral alterations prior to visible symptoms. The completed study will determine whether these responses depend on plant age. Overall, the results will advance understanding of ontogenetically driven variation in spider mite population dynamics and provide a basis for stage-adapted monitoring and early-detection strategies.
- Top Cited PapersOpen Access
- 3 July 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19 (7) , 681-691
Consensus statement on Brillouin light scattering microscopy of biological materials
Brillouin light scattering (BLS) spectroscopy is a non-invasive, non-contact, label-free optical technique that can provide information on the mechanical properties of a material on the submicrometre scale. Over the past decade, BLS has found increasing microscopy applications in the life sciences, driven by the observed importance of mechanical properties in biological processes, the realization of more sensitive BLS spectrometers and the extension of BLS to an imaging modality. As with other spectroscopic techniques, BLS measurements detect not only signals that are characteristic of the investigated sample, but also those of the experimental apparatus, and can be substantially affected by measurement conditions. Here we report a consensus between researchers in the field. We aim to improve the comparability of BLS studies by providing reporting recommendations for the measured parameters and detailing common artefacts. Given that most BLS studies of biological matter are still at proof-of-concept stages and use different, often self-built, spectrometers, a consensus statement is particularly timely to ensure unified advancement.
- 3 July 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19 (7) , 681-691
Top Cited PapersOpen AccessConsensus statement on Brillouin light scattering microscopy of biological materials
Brillouin light scattering (BLS) spectroscopy is a non-invasive, non-contact, label-free optical technique that can provide information on the mechanical properties of a material on the submicrometre scale. Over the past decade, BLS has found increasing microscopy applications in the life sciences, driven by the observed importance of mechanical properties in biological processes, the realization of more sensitive BLS spectrometers and the extension of BLS to an imaging modality. As with other spectroscopic techniques, BLS measurements detect not only signals that are characteristic of the investigated sample, but also those of the experimental apparatus, and can be substantially affected by measurement conditions. Here we report a consensus between researchers in the field. We aim to improve the comparability of BLS studies by providing reporting recommendations for the measured parameters and detailing common artefacts. Given that most BLS studies of biological matter are still at proof-of-concept stages and use different, often self-built, spectrometers, a consensus statement is particularly timely to ensure unified advancement.
- 20 March 2025
- Published by SPIE-Intl Soc Optical Eng
- Vol. PC13357, PC1335704
Automated image registration of RGB, hyperspectral and chlorophyll fluorescence imaging data
The early and specific detection of abiotic and biotic stress factors and particularly their combinations are a major challenge for maintaining and increasing plant productivity in sustainable agriculture under changing environmental conditions. Optical imaging techniques enable cost-efficient and non-destructive quantification of the stress state of plants Monomodal detection of certain stressors are usually based on non-specific/indirect features and therefore commonly limited in their cross-specificity to other stressors. The fusion of multi-domain sensor systems can provide more potentially discriminative features for machine learning models and presumably also provide synergistic information to increase cross-specificity in plant disease detection.
- 20 March 2025
- Published by SPIE-Intl Soc Optical Eng
- Vol. PC13357, PC1335704
Automated image registration of RGB, hyperspectral and chlorophyll fluorescence imaging data
The early and specific detection of abiotic and biotic stress factors and particularly their combinations are a major challenge for maintaining and increasing plant productivity in sustainable agriculture under changing environmental conditions. Optical imaging techniques enable cost-efficient and non-destructive quantification of the stress state of plants Monomodal detection of certain stressors are usually based on non-specific/indirect features and therefore commonly limited in their cross-specificity to other stressors. The fusion of multi-domain sensor systems can provide more potentially discriminative features for machine learning models and presumably also provide synergistic information to increase cross-specificity in plant disease detection.
- Open Access
- 4 February 2025
- Published by Springer Nature in Communications Biology
- Vol. 8 (1) , 1-10
Micromechanical behavior of the apple fruit cuticle investigated by Brillouin light scattering microscopy
The cuticle is a polymeric membrane covering all plant aerial organs of primary origin. It regulates water loss and defends against environmental stressors and pathogens. Despite its significance, understanding of the micro-mechanical properties of the cuticle (cuticular membrane; CM) remains limited. In this study, non-invasive Brillouin light scattering (BLS) spectroscopy was applied to probe the micro-mechanics of native CM, dewaxed CM (DCM), and isolated cutin matrix (CU) of mature apple fruit. The BLS signal arises from the photon interaction with thermally induced pressure waves and allows for imaging with mechanical contrast. The derived loss tangent showed significant differences with wax extraction from the CM and further with carbohydrate extraction from the DCM, consistent with tensile test results. Spatial heterogeneity between anticlinal and periclinal regions was observed by BLS microscopy of CM and DCM, but not in CU. The key conclusions are: (1) BLS is sensitive to micro-mechanical variations, particularly the strain-stiffening effect of the cutin framework, offering insights into the CM’s micro-mechanical behavior and underlying chemical structures; (2) CM and DCM exhibit spatial micro-mechanical heterogeneity between periclinal and anticlinal regions.
- 4 February 2025
- Published by Springer Nature in Communications Biology
- Vol. 8 (1) , 1-10
Open AccessMicromechanical behavior of the apple fruit cuticle investigated by Brillouin light scattering microscopy
The cuticle is a polymeric membrane covering all plant aerial organs of primary origin. It regulates water loss and defends against environmental stressors and pathogens. Despite its significance, understanding of the micro-mechanical properties of the cuticle (cuticular membrane; CM) remains limited. In this study, non-invasive Brillouin light scattering (BLS) spectroscopy was applied to probe the micro-mechanics of native CM, dewaxed CM (DCM), and isolated cutin matrix (CU) of mature apple fruit. The BLS signal arises from the photon interaction with thermally induced pressure waves and allows for imaging with mechanical contrast. The derived loss tangent showed significant differences with wax extraction from the CM and further with carbohydrate extraction from the DCM, consistent with tensile test results. Spatial heterogeneity between anticlinal and periclinal regions was observed by BLS microscopy of CM and DCM, but not in CU. The key conclusions are: (1) BLS is sensitive to micro-mechanical variations, particularly the strain-stiffening effect of the cutin framework, offering insights into the CM’s micro-mechanical behavior and underlying chemical structures; (2) CM and DCM exhibit spatial micro-mechanical heterogeneity between periclinal and anticlinal regions.
- Open Access
- 17 November 2024
- Published by Springer Nature in Plant Methods
- Vol. 20 (1) , 1-18
Automated image registration of RGB, hyperspectral and chlorophyll fluorescence imaging data
Background: The early and specific detection of abiotic and biotic stresses, particularly their combinations, is a major challenge for maintaining and increasing plant productivity in sustainable agriculture under changing environmental conditions. Optical imaging techniques enable cost-efficient and non-destructive quantification of plant stress states. Monomodal detection of certain stressors is usually based on non-specific/indirect features and therefore is commonly limited in their cross-specificity to other stressors. The fusion of multi-domain sensor systems can provide more potentially discriminative features for machine learning models and potentially provide synergistic information to increase cross-specificity in plant disease detection when image data are fused at the pixel level.Results: In this study, we demonstrate successful multi-modal image registration of RGB, hyperspectral (HSI) and chlorophyll fluorescence (ChlF) kinetics data at the pixel level for high-throughput phenotyping ofA. thalianagrown in Multi-well plates and an assay with detached leaf discs ofRosa × hybridainoculated with the black spot disease-inducing fungusDiplocarpon rosae. Here, we showcase the effects of (i) selection of reference image selection, (ii) different registrations methods and (iii) frame selection on the performance of image registration via affine transform. In addition, we developed a combined approach for registration methods through NCC-based selection for each file, resulting in a robust and accurate approach that sacrifices computational time. Since image data encompass multiple objects, the initial coarse image registration using a global transformation matrix exhibited heterogeneity across different image regions. By employing an additional fine registration on the object-separated image data, we achieved a high overlap ratio. Specifically, for theA. thalianatest set, the overlap ratios (ORConvex) were 98.0 ± 2.3% for RGB-to-ChlF and 96.6 ± 4.2% for HSI-to-ChlF. For theRosa × hybridatest set, the values were 98.9 ± 0.5% for RGB-to-ChlF and 98.3 ± 1.3% for HSI-to-ChlF.Conclusion: The presented multi-modal imaging pipeline enables high-throughput, high-dimensional phenotyping of different plant species with respect to various biotic or abiotic stressors. This paves the way for in-depth studies investigating the correlative relationships of the multi-domain data or the performance enhancement of machine learning models via multi modal image fusion.
- 17 November 2024
- Published by Springer Nature in Plant Methods
- Vol. 20 (1) , 1-18
Open AccessAutomated image registration of RGB, hyperspectral and chlorophyll fluorescence imaging data
Background: The early and specific detection of abiotic and biotic stresses, particularly their combinations, is a major challenge for maintaining and increasing plant productivity in sustainable agriculture under changing environmental conditions. Optical imaging techniques enable cost-efficient and non-destructive quantification of plant stress states. Monomodal detection of certain stressors is usually based on non-specific/indirect features and therefore is commonly limited in their cross-specificity to other stressors. The fusion of multi-domain sensor systems can provide more potentially discriminative features for machine learning models and potentially provide synergistic information to increase cross-specificity in plant disease detection when image data are fused at the pixel level.Results: In this study, we demonstrate successful multi-modal image registration of RGB, hyperspectral (HSI) and chlorophyll fluorescence (ChlF) kinetics data at the pixel level for high-throughput phenotyping ofA. thalianagrown in Multi-well plates and an assay with detached leaf discs ofRosa × hybridainoculated with the black spot disease-inducing fungusDiplocarpon rosae. Here, we showcase the effects of (i) selection of reference image selection, (ii) different registrations methods and (iii) frame selection on the performance of image registration via affine transform. In addition, we developed a combined approach for registration methods through NCC-based selection for each file, resulting in a robust and accurate approach that sacrifices computational time. Since image data encompass multiple objects, the initial coarse image registration using a global transformation matrix exhibited heterogeneity across different image regions. By employing an additional fine registration on the object-separated image data, we achieved a high overlap ratio. Specifically, for theA. thalianatest set, the overlap ratios (ORConvex) were 98.0 ± 2.3% for RGB-to-ChlF and 96.6 ± 4.2% for HSI-to-ChlF. For theRosa × hybridatest set, the values were 98.9 ± 0.5% for RGB-to-ChlF and 98.3 ± 1.3% for HSI-to-ChlF.Conclusion: The presented multi-modal imaging pipeline enables high-throughput, high-dimensional phenotyping of different plant species with respect to various biotic or abiotic stressors. This paves the way for in-depth studies investigating the correlative relationships of the multi-domain data or the performance enhancement of machine learning models via multi modal image fusion.
- Open Access
- 13 August 2024
- Published by Springer Nature in Research Square
Brillouin light scattering microscopy reveals micro-mechanical inhomogeneities of the apple fruit cuticle
The cuticle is a polymeric membrane covering all plant aerial organs of primary origin. It regulates water loss and defends against environmental stressors and pathogens. Despite its significance, understanding the micro-mechanical properties of the cuticle (cuticular membrane; CM) remains limited. In this study, non-invasive Brillouin light scattering (BLS) spectroscopy was applied to probe the micro-mechanics of native CM, dewaxed CM (DCM), and isolated cutin matrix (CU) of mature apple fruit. The Brillouin frequency shift (BFS) decreased significantly with wax extraction from the CM and further decreased with polysaccharide extraction from the DCM, consistent with tensile test results. Spatial heterogeneity was observed by BLS microscopy of the CM, with BFS of the anticlinal region being significantly smaller than that of the periclinal region. In the DCM, BFS was higher in the periclinal than in the anticlinal region, while in the CU, BFS was similar in both regions. The key conclusions are: (1) BLS is sensitive to micro-mechanical variations, particularly stiffness, offering novel insights into the CM’s micro-mechanical behavior and underlying chemical structures; (2) CM exhibits spatial micro-mechanical inhomogeneity, with periclinal regions being stiffer than anticlinal regions, likely due to the heterogeneous distribution of wax and polysaccharides.
- 13 August 2024
- Published by Springer Nature in Research Square
Open AccessBrillouin light scattering microscopy reveals micro-mechanical inhomogeneities of the apple fruit cuticle
The cuticle is a polymeric membrane covering all plant aerial organs of primary origin. It regulates water loss and defends against environmental stressors and pathogens. Despite its significance, understanding the micro-mechanical properties of the cuticle (cuticular membrane; CM) remains limited. In this study, non-invasive Brillouin light scattering (BLS) spectroscopy was applied to probe the micro-mechanics of native CM, dewaxed CM (DCM), and isolated cutin matrix (CU) of mature apple fruit. The Brillouin frequency shift (BFS) decreased significantly with wax extraction from the CM and further decreased with polysaccharide extraction from the DCM, consistent with tensile test results. Spatial heterogeneity was observed by BLS microscopy of the CM, with BFS of the anticlinal region being significantly smaller than that of the periclinal region. In the DCM, BFS was higher in the periclinal than in the anticlinal region, while in the CU, BFS was similar in both regions. The key conclusions are: (1) BLS is sensitive to micro-mechanical variations, particularly stiffness, offering novel insights into the CM’s micro-mechanical behavior and underlying chemical structures; (2) CM exhibits spatial micro-mechanical inhomogeneity, with periclinal regions being stiffer than anticlinal regions, likely due to the heterogeneous distribution of wax and polysaccharides.
- 12 March 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12879, 28-31
Development of a portable and low-cost OCT system for horticultural research
Optical Coherence Tomography (OCT), a non-contact, non-destructive imaging technique, is becoming a popular tool in phytophotonics, helping to address research questions in plant biology and horticulture. However, the stationary nature of typical OCT systems compromises its non-destructive advantage since plants often need to be dissected for an analysis with a laboratory OCT system. Here we present a portable, low-cost OCT system that enables in-situ measurements of plants. We outline technical challenges encountered during the development and showcase initial measurements of different plant tissues.
- 12 March 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12879, 28-31
Development of a portable and low-cost OCT system for horticultural research
Optical Coherence Tomography (OCT), a non-contact, non-destructive imaging technique, is becoming a popular tool in phytophotonics, helping to address research questions in plant biology and horticulture. However, the stationary nature of typical OCT systems compromises its non-destructive advantage since plants often need to be dissected for an analysis with a laboratory OCT system. Here we present a portable, low-cost OCT system that enables in-situ measurements of plants. We outline technical challenges encountered during the development and showcase initial measurements of different plant tissues.
- 12 March 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12879, 63-65
Perspectives of micro-mechanical assessment of the apple fruit cuticle
The cuticle is a natural polymeric membrane that covers the surface of aerial organs (including fruit) of terrestrial plants. The cuticle membrane mainly consists of cutins, waxes, and polysaccharides and serves as a protective barrier against water movement, adverse environmental conditions and the invasion of pathogens. Fulfilling its barrier function requires an intact cuticle. During fruit development, the cuticle is stretched and heavily stressed as the fruits grow exponentially in phases. In apple fruit, cutin and wax are synthesized constitutively throughout development. The newly synthesized cutin is deposited on the cuticle’s inner side. This results in a gradient of age and strain in the cuticle from outside (older, more strained) to inside (younger, less strained). Wax is deposited mainly within the cutin network and fixes the elastic strain of the cutin network. Studies indicated that wax concentration among the different layers of the cutin also varies with more wax in the outer cuticular proper and less in the inner cuticle layer. As a result, the cuticle of mature apple fruits exhibits a complex micromechanical structure. Characterizing this structure poses challenges that cannot be overcome using conventional tensile testing methods. In this study, we employed a Brillouin scattering setup to investigate the micromechanical structure of the cuticle.
- 12 March 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12879, 63-65
Perspectives of micro-mechanical assessment of the apple fruit cuticle
The cuticle is a natural polymeric membrane that covers the surface of aerial organs (including fruit) of terrestrial plants. The cuticle membrane mainly consists of cutins, waxes, and polysaccharides and serves as a protective barrier against water movement, adverse environmental conditions and the invasion of pathogens. Fulfilling its barrier function requires an intact cuticle. During fruit development, the cuticle is stretched and heavily stressed as the fruits grow exponentially in phases. In apple fruit, cutin and wax are synthesized constitutively throughout development. The newly synthesized cutin is deposited on the cuticle’s inner side. This results in a gradient of age and strain in the cuticle from outside (older, more strained) to inside (younger, less strained). Wax is deposited mainly within the cutin network and fixes the elastic strain of the cutin network. Studies indicated that wax concentration among the different layers of the cutin also varies with more wax in the outer cuticular proper and less in the inner cuticle layer. As a result, the cuticle of mature apple fruits exhibits a complex micromechanical structure. Characterizing this structure poses challenges that cannot be overcome using conventional tensile testing methods. In this study, we employed a Brillouin scattering setup to investigate the micromechanical structure of the cuticle.
- 12 March 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12879, 15-78
Towards automated phenotyping in plant tissue culture: in situ fluorescence monitoring
Plant in vitro culture techniques are fundamental for research, propagation, and breeding. Automated phenotyping of in vitro cultures can revolutionize trait evaluation by transitioning to continuous and objective quantification, as well as by enhancing accuracy, speed, and efficiency. Limited research exists on automated sensor usage in plant tissue culture, mainly focusing on "plant-to-sensor" approaches. While reflection-based imaging techniques have dominated research to date, fluorescence-based imaging could offer advantages for the application of phenotyping in commercial in vitro propagation and plant research. We developed a new detector head for our “Phenomenon” plant phenotyping system to investigate the potential of fluorescence-based in situ monitoring of plant in vitro culture. In this study, we demonstrate the acquisition of fluorescence image data from plant in vitro cultures as an advanced imaging technique for phenotyping approaches. Over time and qualitatively, we were able to document the development of hairy roots in N. tabacum after transformation with Rhizobium rhizogenes carrying the recently developed reporter gene eYGFPuv.
- 12 March 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12879, 15-78
Towards automated phenotyping in plant tissue culture: in situ fluorescence monitoring
Plant in vitro culture techniques are fundamental for research, propagation, and breeding. Automated phenotyping of in vitro cultures can revolutionize trait evaluation by transitioning to continuous and objective quantification, as well as by enhancing accuracy, speed, and efficiency. Limited research exists on automated sensor usage in plant tissue culture, mainly focusing on "plant-to-sensor" approaches. While reflection-based imaging techniques have dominated research to date, fluorescence-based imaging could offer advantages for the application of phenotyping in commercial in vitro propagation and plant research. We developed a new detector head for our “Phenomenon” plant phenotyping system to investigate the potential of fluorescence-based in situ monitoring of plant in vitro culture. In this study, we demonstrate the acquisition of fluorescence image data from plant in vitro cultures as an advanced imaging technique for phenotyping approaches. Over time and qualitatively, we were able to document the development of hairy roots in N. tabacum after transformation with Rhizobium rhizogenes carrying the recently developed reporter gene eYGFPuv.
- Open Access
- 10 August 2023
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 14 (9) , 4579-4593
Imaging and quantification of the tumor microenvironment of triple negative breast cancer using TPEF and scanning laser optical tomography
Triple-negative breast cancer is an aggressive subtype of breast cancer that has a poor five-year survival rate. The tumor’s extracellular matrix is a major compartment of its microenvironment and influences the proliferation, migration and the formation of metastases. The study of such dependencies requires methods to analyze the tumor matrix in its native form. In this work, the limits of SHG-microscopy, namely limited penetration depth, sample size and specificity, are addressed by correlative three-dimensional imaging. We present the combination of scanning laser optical tomography (SLOT) and multiphoton microscopy, to depict the matrix collagen on different scales. Both methods can be used complementarily to generate full-volume views and allow for in-depth analysis. Additionally, we explore the use of SHG as a contrast mechanism for complex samples in SLOT. It was possible to depict the overall collagen structure and specific fibers using marker free imaging on different scales. An appropriate sample preparation enables the fixation of the structures while simultaneously conserving the fluorescence of antibody staining. We find that SHG is a suitable contrast mechanism to depict matrix collagen even in complex samples and using SLOT. The insights presented here shall further facilitate the study of the tumor extracellular matrix by correlative 3d imaging.
- 10 August 2023
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 14 (9) , 4579-4593
Open AccessImaging and quantification of the tumor microenvironment of triple negative breast cancer using TPEF and scanning laser optical tomography
Triple-negative breast cancer is an aggressive subtype of breast cancer that has a poor five-year survival rate. The tumor’s extracellular matrix is a major compartment of its microenvironment and influences the proliferation, migration and the formation of metastases. The study of such dependencies requires methods to analyze the tumor matrix in its native form. In this work, the limits of SHG-microscopy, namely limited penetration depth, sample size and specificity, are addressed by correlative three-dimensional imaging. We present the combination of scanning laser optical tomography (SLOT) and multiphoton microscopy, to depict the matrix collagen on different scales. Both methods can be used complementarily to generate full-volume views and allow for in-depth analysis. Additionally, we explore the use of SHG as a contrast mechanism for complex samples in SLOT. It was possible to depict the overall collagen structure and specific fibers using marker free imaging on different scales. An appropriate sample preparation enables the fixation of the structures while simultaneously conserving the fluorescence of antibody staining. We find that SHG is a suitable contrast mechanism to depict matrix collagen even in complex samples and using SLOT. The insights presented here shall further facilitate the study of the tumor extracellular matrix by correlative 3d imaging.