Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Luca Zulberti has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hardware Platforms Enabling Edge AI for Space Applications: A Critical Review

    by Gabriela Mystkowska, Matteo Monopoli, Pietro Nannipieri, Luca Zulberti, David Merodio Codinachs, Luca Fanucci

    Artificial Intelligence is an emerging technology in the space industry as it enables real-time data processing and autonomous navigation. We aim to facilitate mission development by providing an extensive state-of-the-art review. We analyze recent advancements in hardware architectures for space on-the-edge applications. We explore the unique challenges of space environments, including radiation hardening, flexibility, and real-time processing needs. We identify the possible hardware accelerator architectures and assess their applicability on-board spacecraft. We examine key developments in hardware accelerators, general-purpose processors, and neuromorphic chips, with an emphasis on adaptability for space applications. We compare the available chips in terms of performance capabilities, power consumption, technology node and radiation hardening. We showcase future directions, offering a comprehensive overview of cutting-edge solutions for AI-driven space missions.


  • Open Access

    SmartDMA: Adaptable Memory Access Controller for CGRA-based Processing Systems

    by Luca Zulberti, Andrea Monorchio, Matteo Monopoli, Gabriela Mystkowska, Pietro Nannipieri, Luca Fanucci

    Modern computing platforms exploiting Coarse-Grained Reconfigurable Array architectures depend highly on the efficiency with which data are handled inside the architecture. Moving data is critical in computing-intensive systems to maximize energy efficiency and reduce latency. Access to the main memory is the most costly operation; therefore, the data retrieved must be kept near the processing elements of the architecture as long as possible to reduce data transfers. Modern algorithms involve very different access patterns to the main memory, requiring high versatility for Direct Memory Access (DMA) mechanisms. This work presents the SmartDMA architecture, a RISC-V-based programmable DMA controller specifically designed to perform adaptable memory access patterns and implement proper data reuse policies in CGRA-based systems. It comprises a set of Data Mover Engines (DMEs) that implement configurable 1D, 2D, and 3D data movements. Using a custom RISC-V ISA extension and a programmable event network, the application-specific firmware loaded on the SmartDMA can schedule DMA commands among all DMEs, ensuring that they are always busy with data transactions. We show a typical use case that takes advantage of CGRA-based processing and highlights the functionality of the SmartDMA. We synthesized the SmartDMA on TSMC 40nm low-power standard-cell technology at 350 MHz for three architectural configurations, increasing the number of DMEs, with a maximum memory throughput of 5.6 GB/s: small, medium, and large. The small configuration occupies 46.2k um2 of cell area and consumes 8.64 mW. The medium occupies 117k um2 and consumes 23.1 mW. The large one occupies 243k um2 and consumes 42.7 mW.

  • A PUF-Based Secure Boot for RISC-V Architectures

    by Stefano Di Matteo, Luca Zulberti, Federico Cosimo Lapenna, Pietro Nannipieri, Luca Crocetti, Luca Fanucci, Sergio Saponara


  • Cycle-Accurate Verification of the Cryptographic Co-Processor for the European Processor Initiative

    by Pietro Nannipieri, Stefano Di Matteo, Luca Crocetti, Luca Zulberti, Luca Fanucci, Sergio Saponara


  • Open Access

    Exploring Key Aspects of Soft GPGPU Computing for On-board Acceleration of Artificial Intelligence Algorithms in Space Applications

    by Matteo Monopoli, Luca Zulberti, Pietro Nannipieri, Luca Fanucci, Silvia Moranti

    Artificial Intelligence has gained widespread adoption across different industrial sectors, serving as a versatile tool to carry out a diverse array of tasks, ranging from image classification and traffic forecasting to natural language processing and speech recognition. In the space domain, however, a special focus must be placed on area overhead, power consumption, and fault-tolerant solutions. In this particular scenario, soft General-Purpose Computing on Graphic Processing Units has the potential to revolutionise space-related activities. Indeed, by leveraging both Field Programmable Gate Array technology and Graphic Processing Unit computing, it becomes feasible to achieve high-performance capabilities without compromising neither power consumption nor radiation tolerance features. Moreover, the use of reconfigurable hardware can facilitate the acceleration of a wide range of Machine Learning algorithms, avoiding the drawbacks of excessive specialisation. This paper explores the State-of-the-Art in terms of hardware platforms for on-the-edge acceleration of Artificial Intelligence algorithms and compares it with a possible System-on-Chip implementation based on a soft-Graphic Processing Unit. Then, the attention is shifted towards the investigation of key aspects for future space missions, such as reliability and Dynamic Partial Reconfiguration. We point out the lack of European technological solutions, emphasising the promising potential offered by NanoXplore devices. We also discuss the importance of fault detection and mitigation techniques in space applications, covering the most commonly employed hardware methods for reliability enhancement and highlighting the lack of work in the field of General-Purpose Computing for Graphic Processing Units, especially in the space sector. Furthermore, we briefly examine the implementation of Dynamic Partial Reconfiguration over a System-on-Chip featuring a soft-Graphic Processing Unit IP. Finally, in the last section of the paper, we hint at future development of the project and conclude the work.


  • Open Access

    Highly-Parameterised CGRA Architecture for Design Space Exploration of Machine Learning Applications Onboard Satellites

    by Luca Zulberti, Matteo Monopoli, Pietro Nannipieri, Luca Fanucci

    This work presents a highly parameterised CGRA-based accelerator that we developed for an extensive Design Space Exploration activity on design parameters. The description starts from the CGRA building blocks, the Functional Units, and progresses towards the top level of the architecture, represented by the Node component, which is composed of an NxM matrix of Processing Elements. For each level of the hierarchy, we describe the HDL design parameters affecting the run-time reconfigurability of the accelerator, delving deeper into the functionality of the architecture. Outcomes are reported after synthesis on TSMC 40nm standard-cell technology.


  • Open Access

    A Script-Based Cycle-True Verification Framework to Speed-Up Hardware and Software Co-Design: Performance Evaluation on ECC Accelerator Use-Case

    by Luca Zulberti, Stefano Di Matteo, Pietro Nannipieri, Sergio Saponara, Luca Fanucci

    Digital designs complexity has exponentially increased in the last decades. Heterogeneous Systems-on-Chip integrate many different hardware components which require a reliable and scalable verification environment. The effort to set up such environments has increased as well and plays a significant role in digital design projects, taking more than 50% of the total project time. Several solutions have been developed with the goal of automating this task, integrating various steps of the Very Large Scale Integration design flow, but without addressing the exploration of the design space on both the software and hardware sides. Early in the co-design phase, designers break down the system into hardware and software parts taking into account different choices to explore the design space. This work describes the use of a framework for automating the verification of such choices, considering both hardware and software development flows. The framework automates compilation of software, cycle-true simulations and analyses on synthesised netlists. It accelerates the design space exploration exploiting the GNU Make tool, and we focus on ensuring consistency of results and providing a mechanism to obtain reproducibility of the design flow. In design teams, the last feature increases cooperation and knowledge sharing from single expert to the whole team. Using flow recipes, designers can configure various third-party tools integrated into the modular structure of the framework, and make workflow execution customisable. We demonstrate how the developed framework can be used to speed up the setup of the evaluation flow of an Elliptic-Curve-Cryptography accelerator, performing post-synthesis analyses. The framework can be easily configured taking approximately 30 min, instead of few days, to build up an environment to assess the accelerator performance and its resistance to simple power analysis side-channel attacks.


  • VLSI Design of Advanced-Features AES Cryptoprocessor in the Framework of the European Processor Initiative

    by Pietro Nannipieri, Stefano Di Matteo, Luca Baldanzi, Luca Crocetti, Luca Zulberti, Sergio Saponara, Luca Fanucci

    This article presents a cryptographic hardware (HW) accelerator supporting multiple advanced encryption standard (AES)-based block cipher modes, including the more advanced cipher-based MAC (CMAC), counter with CBC-MAC (CCM), Galois counter mode (GCM), and XOR-encrypt-XOR-based tweaked-codebook mode with ciphertext stealing (XTS) modes. The proposed design implements advanced and innovative features in HW, such as AES key secure management, on-chip clock randomization, and access privilege mechanisms. The system has been tested in a RISC-V-based system-on-chip (SoC), specifically designed for this purpose, on an Ultrascale + Xilinx FPGA, analyzing resource and power consumption, together with system performances. The cryptoprocessor has been then synthesized on a 7-nm CMOS standard-cells technology; performances, complexity, and power consumption information are analyzed and compared with the state of the art. The proposed cryptoprocessor is ready to be embedded within the innovative European Processor Initiative (EPI) chip.