KKKiok Kwon

Kiok Kwon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kiok Kwon has a total of 38 co-authors. Here are the top co-authors by number of shared publications:

  • Seunghan Shin

    Green Chemistry & Materials Group, Korea Institute of Industrial Technology (KITECH), Cheonan 31056, Republic of Korea

    9 shared publications
  • Hee-Woong Park

    Green Chemistry & Materials Group, Korea Institute of Industrial Technology (KITECH), Cheonan, Chungnam 31056, Korea

    3 shared publications
  • Seunghan Shin

    Green and Sustainable Materials R&D Department Korea Institute of Industrial Technology (KITECH) Cheonan‐si Republic of Korea

    3 shared publications
  • Dae Woo Kim

    Department of Chemical and Biomolecular Engineering Yonsei University Seoul Republic of Korea

    2 shared publications
  • Goeun Lee

    Green and Sustainable Materials R&D Department, Korea Institute of Industrial Technology (KITECH), Republic of Korea

    2 shared publications
  • Hyun-Su Seo

    Green Chemistry & Materials Group, Korea Institute of Industrial Technology (KITECH), Cheonan 31056, Chungnam, Korea

    2 shared publications

Latest Publications

  • Sub‐3 nm Ruthenium Nanopatterns Enabled by Pattern Transfer From Supramolecular Dendrimer Templates

    by Yeongjae Ham, Gwangyeop Kim, Kangho Park, Wonmoo Lee, Euijin Lee, Aqil Jamal, Issam Gereige, Ahyeon Cho, Kiok Kwon, Hee‐Tae Jung

    The fabrication of inorganic‐based nanopatterns with feature sizes below 3 nm remains a fundamental challenge in nanoscience and advanced manufacturing. Existing approaches, including extreme ultraviolet lithography, block copolymer self‐assembly, and colloidal nanocrystal patterning, struggle to reliably achieve such dimensions while maintaining long‐range order and structural fidelity. Here, we present a pattern transfer technique from a supramolecular dendrimer templating strategy that enables highly ordered sub‐3 nm ruthenium‐based nanostructures over large areas (1 µm × 1 µm). The pristine dendrimer template forms a hexagonally packed cylindrical morphology with sub‐5 nm periodicity, exhibiting structural stability and long‐range order. Thermal annealing induces cooperative self‐assembly into a single‐domain array, which is selectively stained with RuO 4 to generate an inorganic RuO 2 core while preserving structural registry. This Ru‐incorporated dendrimer architecture shows markedly enhanced thermal and structural stability. Electron microscopy and elemental mapping confirm vertically aligned cylindrical domains with high pattern fidelity. Subsequent calcination at 250°C removes unstained organic components without structural collapse, yielding periodic Ru‐based nanostructures with a characteristic feature size of ∼2.5 nm. This work establishes a versatile bottom‐up platform for ultrahigh‐resolution patterning beyond current lithographic limits and provides a scalable route toward next‐generation nanoelectronic, catalytic, and quantum device architectures.


  • Open Access

    High-adhesive and conductive AMPSs-TA-Fe hydrogels via E-beam-assisted rapid one-pot synthesis for strain sensor

    by Eunhye Kim, Heewoong Park, Ngo Thi Hang, Daewoo Kim, Seunghan Shin, Kiok Kwon


  • Open Access

    Enhancing the Mechanical and Adhesive Properties of Polyurethane Adhesives with Propylene Oxide-Modified Ethylenediamine (PPO-EDA)

    by Nam Gyu Jang, Tran Quang Linh, Mai Toan, Kiok Kwon, Seunghan Shin

    This study explores the use of propylene oxide-modified ethylenediamine (PPO-EDA) as a novel crosslinker and chain extender in polyurethane (PU) adhesives. PPO-EDA was synthesized and compared with N,N’-dimethylethylenediamine (DMEDA) to assess its impact on mechanical properties and adhesion performance. Key parameters such as NCO conversion, tensile strength, and lap shear strength were thoroughly evaluated. The results demonstrated that incorporating PPO-EDA significantly improved NCO conversion and crosslink density, leading to notable enhancements in tensile strength and elastic modulus compared to DMEDA. Lap shear tests further revealed superior adhesion performance in PPO-EDA-modified PU adhesives, particularly on amine silane-treated steel substrates, where lap shear strength consistently outperformed other samples. This improved performance was attributed to PPO-EDA’s dual role as a chain extender and crosslinker, which strengthened the adhesive’s structural integrity. This study underscores the effectiveness of PPO-EDA as a modifier for enhancing both mechanical and adhesive properties in PU-based adhesives, offering a promising solution for optimizing high-performance adhesives in automotive and industrial applications.


  • Open Access

    Synthesis of Novel Zwitterionic Surfactants: Achieving Enhanced Water Resistance and Adhesion in Emulsion Polymer Adhesives

    by Mai Toan, Jaehyouk Choi, Hang Thi Ngo, Jin-Young Bae, Seunghan Shin, Kiok Kwon

    Recent advancements in polymer materials have enabled the synthesis of bio-based monomers from renewable resources, promoting sustainable alternatives to fossil-based materials. This study presents a novel zwitterionic surfactant, SF, derived from 10-undecenoic acid obtained from castor oil through a four-step reaction, achieving a yield of 78%. SF has a critical micelle concentration (CMC) of 1235 mg/L, slightly higher than the commercial anionic surfactant Rhodacal DS-4 (sodium dodecyl benzene sulfonate), and effectively stabilizes monomer droplets, leading to excellent conversion and stable latex formation. The zwitterionic groups in SF enhance adhesion to hydrophilic substrates (glass, stainless steel, and skin). Films produced with SF exhibit outstanding water resistance, with only 18.48% water uptake after 1800 min, compared to 81% for the control using Rhodacal DS-4. Notably, SF maintains low water uptake across various concentrations, minimizing water penetration. Thus, the synthesized SF demonstrates improved adhesive properties and excellent water resistance in emulsion polymerization applications, highlighting its potential as a sustainable, high-performance alternative to petrochemical surfactants.


  • Maize‐derived zein/acrylic hybrid emulsion for superior skin adhesion and water resistance in cosmetic adhesives

    by Min Yeong Kang, Jaehyouk Choi, Seunghan Shin, Kiok Kwon

    Waterborne acrylic emulsions are considered suitable materials for cosmetic skin adhesives because of their positive attributes, such as their safe water‐based polymerization process and low volatile‐organic‐compound emissions. The significant challenge of inadequate water resistance in emulsion adhesives, which is primarily caused by the excess surfactants retained at the interface of emulsion particles upon film formation, necessitates urgent resolution for their viable application as cosmetic adhesives. Zein, a corn‐derived protein, possesses hydrophobic amino acids that provide exceptional water‐repellent characteristics. Therefore, zein is expected to exhibit a remarkable skin‐adhesion attribute. This paper presents the introduction of a pioneering zein/acrylic hybrid emulsion exhibiting remarkable skin adhesion and water resistance, which was achieved through the use of zein, a corn‐derived protein. After formation, the zein/ sodium dodecyl sulfate (SDS) complex can unfold the zein chain, thereby enhancing skin adhesion, while concurrently inhibiting surfactant migration to enhance water resistance. The zein/SDS complex was introduced into the Pre‐emulsion (PE) manufacturing process during emulsion polymerization. As expected, the zein/acrylic hybrid emulsion demonstrated favorable skin adhesion and a notable improvement in water resistance. This approach presents a promising avenue for the practical application of emulsion nanoparticles as eco‐friendly cosmetic adhesives, offering excellent durability and skin adhesion through the utilization of naturally derived proteins.


  • Open Access

    Rapid detection of Salmonella using an aptamer-functionalized PDA liposome sensor with naked-eye colorimetric sensing

    by Goeun Lee, Byeongsung Kim, Inseung Jang, Moon Il Kim, Seunghan Shin, Kiok Kwon

    Our study presents a PDA-based liposome sensor detecting Salmonella rapidly and accurately via colorimetric response. Functionalized with a Salmonella-binding aptamer, this sensor achieves detection within 15 minutes, visible to the naked eye.


  • Open Access

    Facile Synthesis of Self-Adhesion and Ion-Conducting 2-Acrylamido-2-Methylpropane Sulfonic Acid/Tannic Acid Hydrogels Using Electron Beam Irradiation

    by Hee-Woong Park, Nam-Gyu Jang, Hyun-Su Seo, Kiok Kwon, Seunghan Shin

    Tannic acid (TA) can be used as an additive to improve the properties of hydrogels, but it acts as a radical scavenger, which hinders radical polymerization. In this study, we successfully and easily synthesized a TA-incorporated 2-acrylamido-2-methylpropanesulfonic acid (AMPS) hydrogel using an electron beam (E-beam) in a one-pot process at room temperature. TA successfully grafted onto AMPS polymer chains under E-beam irradiation, but higher TA content reduced grafting efficiency and prevented hydrogel formation. Peel strength of the AMPS hydrogel increased proportionally with TA, but cohesive failure and substrate residue occurred above 1.25 phm (parts per 100 g of AMPS) TA. Tensile strength peaked at 0.25 phm TA but decreased below the control value at 1.25 phm. Tensile elongation exceeded 2000% with TA addition. Peel strength varied significantly with substrate type. The wood substrate had the highest peel strength value of 150 N/m, while pork skin had a low value of 11.5 N/m. However, the addition of TA increased the peel strength by over 300%. The ionic conductivity of the AMPS/TA hydrogel increased from 0.9 S/m to 1.52 S/m with TA content, while the swelling ratio decreased by 50% upon TA addition and increased slightly thereafter.


  • Open Access

    Preparation of UV-curable PSAs by grafting isocyanate-terminated photoreactive monomers and the effect of the functionality of grafted monomers on the debonding properties on Si wafers

    by Hee-Woong Park, Hyun-Su Seo, Kiok Kwon, Seunghan Shin

    Photoreactive pressure-sensitive adhesives (PSAs) were prepared by grafting mono- or difunctional photoreactive monomers onto acrylic PSA, and their adhesion properties were evaluated before and after ultraviolet (UV) curing for application as dicing tape. In this study, the NCO-terminated difunctional photoreactive monomer (NDPM) was newly synthesized and compared with 2-acryloxyloxyethyl isocyanate (AOI), a monofunctional monomer. The 180° peel strengths of pristine and photoreactive PSAs were similar before UV curing (1850–2030 gf/25 mm). After UV curing, the 180° peel strengths of the photoreactive PSAs decreased significantly and converged to nearly zero. When a UV dose of 200 mJ cm−2 was used, the 180° peel strength of 40% NDPM-grafted PSA decreased to 8.40 gf/25 mm, which was much lower than that of 40% AOI-grafted PSA (39.26 gf/25 mm). NDPM-grafted PSA also showed that its storage modulus shifted more to the upper right side of Chang's viscoelastic window than AOI-grafted PSA, and this is because NDPM provided a higher degree of crosslinking than AOI. Furthermore, SEM-EDS analysis showed that UV-cured NDPM-grafted PSA retained almost no residue on the silicon wafer after debonding.


  • Open Access

    All polymeric conductive strain sensors with excellent skin adhesion, recovery, and long-term stability prepared from an anion–zwitterion based hydrogel

    by Goeun Lee, Hyunsu Seo, Daewoo Kim, Seunghan Shin, Kiok Kwon

    Developing a high-performing hydrogel with long-lasting skin adhesion, high ionic conductivity, mechanical stability, and fatigue resistance is a crucial issue in the field of wearable electronic devices. Because of their weak mechanical properties, zwitterion-based hydrogels are not suitable for application in wearable strain sensors despite their excellent adhesion to the skin. In this study, a hydrogel of polymer without additive was prepared by using polymerizable monomers consisting of zwitterionic 3-(1-vinyl-3-imidazolio)propanesulfonate (VIPS), anionic 2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt (AMPSs), and acrylamide (AAm); the hydrogel is abbreviated as P(AMPSs/VIPS-co-AAm). The P(AMPSs/VIPS-co-AAm) hydrogel shows exceptional adhesive strength, reaching up to 26.29 kPa (lap shear to porcine skin) and high stretchability (with a fracture strain of 1282% and stress of 40 kPa). The high polarity of the AMPSs/VIPS pair improves the interfacial adhesion to the skin, the internal cohesion and recovery tendency. Unique structural characteristics of the hydrogel impart excellent fatigue resistance, network toughening, and electrical stability after multiple deformations. Thus, the prepared hydrogel has an ionic conductivity (0.51 S m−1), strain sensitivity, and long-term skin adhesion, and it demonstrates potential to be applied for wearable strain sensors.


  • Open Access

    Synthesis and Assessment of AMPS-Based Copolymers Prepared via Electron-Beam Irradiation for Ionic Conductive Hydrogels

    by Hyun-Su Seo, Jin-Young Bae, Kiok Kwon, Seunghan Shin

    In this study, ionic conductive hydrogels were prepared with 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS). Acrylic acid (AA), acrylamide (AAm), and 2-hydroxyethyl acrylate (HEA) were used as comonomers to complement the adhesion properties and ion conductivity of AMPS hydrogels. Hydrogels were prepared by irradiating a 20 kGy dose of E-beam to the aqueous monomer solution. With the E-beam irradiation, the polymer chain growth and network formation simultaneously proceeded to form a three-dimensional network. The preferred reaction was determined by the type of comonomer, and the structure of the hydrogel was changed accordingly. When AA or AAm was used as a comonomer, polymer growth and crosslinking proceeded together, so a hydrogel with increased peel strength and tensile strength could be prepared. In particular, in the case of AA, it was possible to prepare a hydrogel with improved adhesion without sacrificing ionic conductivity. When the molar ratio of AA to AMPS was 3.18, the 90° peel strength of AMPS hydrogel increased from 171 to 428 gf/25 mm, and ionic conductivity slightly decreased, from 0.93 to 0.84 S/m. By copolymerisation with HEA, polymer growth was preferred compared with chain crosslinking, and a hydrogel with lower peel strength, swelling ratio, and ionic conductivity than the pristine AMPS hydrogel was obtained.