Camila A. Gordon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Camila A. Gordon has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Alain N. Rousseau
Centre Eau Terre Environnement (ETE), Institut National de la Recherche Scientifique (INRS), 490 Rue de la Couronne, Quebec, QC G1K 9A9, Canada
2 shared publications Etienne Foulon
2 shared publicationsAlain N. Rousseau
1 shared publicationAlain Rousseau
1 shared publication- Eduardo Mariano-Neto
Biology Institute, Federal University of Bahia (UFBA), Salvador 40170-115, Brazil
1 shared publication - Mathurin François
Ecologia e Conservação da Biodiversidade, Universidade Estadual de Santa Cruz (UESC), Rodovia Jorge Amado, Km 16, Bairro Salobrinho, Ilheus 45662-900, Brazil
1 shared publication
Latest Publications
- Open Access
- 30 March 2026
- Published by Elsevier in SSRN Electronic Journal
A comprehensive framework to compare SMAP, HYDROTEL and in-situ-derived freeze/thaw state: Application to an agro-forested watershed
Freeze–thaw (F/T) cycles can have substantial effect on soil properties, hydrological processes, and carbon dynamics in cold regions. As global temperatures rise, these cycles are shifting in timing and extent, underscoring the need for improved detection and monitoring at multiple scales. This study presents a comprehensive assessment of the Soil Moisture Active Passive (SMAP) satellite F/T product and the process-based HYDROTEL hydrological model which simulates vertical soil temperature profiles and estimates frost depth by solving thermal conduction equations in a mixed agro-forested watershed in southern Quebec, Canada. In situ soil temperature measurements from two meteorological stations served as ground truth to validate F/T detection for varying land covers, soil depths, and satellite overpass times. The results reveal that the SMAP detection accuracy for shallow depths (5 cm) is highest for open cropland areas ranging from 75.3% to 84.4%, particularly during the PM (ascending) overpass, but decreases for greater depths for forested areas, reflecting the influence of canopy cover and vertical soil temperature gradients. Meanwhile, HYDROTEL showed strong agreement for thawed states but tended to overestimate frozen conditions when compared against SMAP’s detection. Spatial analysis highlighted the effects of land cover heterogeneity and sub-pixel variability on the detection accuracy and emphasized persistent challenges in simulating frozen state of the soil under snow cover and heterogeneous landscapes. By integrating satellite products, modeling results, and in situ observations, this study advances our understanding of F/T cycle dynamics and identifies sources of uncertainty of the studied remote sensing and modeling approaches. These findings reveal the value of combining process-based models and satellite data for hydrological monitoring and modeling of small watersheds and inform future efforts to improve the detection of F/T states for water resources management and crop insurance assessment in cold regions. Keywords— SMAP, Cold Regions, Freeze and Thaw Cycles, Frost Depth, HYDROTEL
- 30 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA comprehensive framework to compare SMAP, HYDROTEL and in-situ-derived freeze/thaw state: Application to an agro-forested watershed
Freeze–thaw (F/T) cycles can have substantial effect on soil properties, hydrological processes, and carbon dynamics in cold regions. As global temperatures rise, these cycles are shifting in timing and extent, underscoring the need for improved detection and monitoring at multiple scales. This study presents a comprehensive assessment of the Soil Moisture Active Passive (SMAP) satellite F/T product and the process-based HYDROTEL hydrological model which simulates vertical soil temperature profiles and estimates frost depth by solving thermal conduction equations in a mixed agro-forested watershed in southern Quebec, Canada. In situ soil temperature measurements from two meteorological stations served as ground truth to validate F/T detection for varying land covers, soil depths, and satellite overpass times. The results reveal that the SMAP detection accuracy for shallow depths (5 cm) is highest for open cropland areas ranging from 75.3% to 84.4%, particularly during the PM (ascending) overpass, but decreases for greater depths for forested areas, reflecting the influence of canopy cover and vertical soil temperature gradients. Meanwhile, HYDROTEL showed strong agreement for thawed states but tended to overestimate frozen conditions when compared against SMAP’s detection. Spatial analysis highlighted the effects of land cover heterogeneity and sub-pixel variability on the detection accuracy and emphasized persistent challenges in simulating frozen state of the soil under snow cover and heterogeneous landscapes. By integrating satellite products, modeling results, and in situ observations, this study advances our understanding of F/T cycle dynamics and identifies sources of uncertainty of the studied remote sensing and modeling approaches. These findings reveal the value of combining process-based models and satellite data for hydrological monitoring and modeling of small watersheds and inform future efforts to improve the detection of F/T states for water resources management and crop insurance assessment in cold regions. Keywords— SMAP, Cold Regions, Freeze and Thaw Cycles, Frost Depth, HYDROTEL
- Open Access
- 2 December 2024
- Published by MDPI AG in Soil Systems
- Vol. 8 (4) , 125
Assessing the Global Sensitivity of RUSLE Factors: A Case Study of Southern Bahia, Brazil
Global sensitivity analysis (GSA) of the revised universal soil loss equation (RUSLE) factors is in its infancy but is crucial to rank the importance of each factor in terms of its non-linear impact on the soil erosion rate. Hence, the goal of this study was to perform a GSA of each factor of RUSLE for a soil erosion assessment in southern Bahia, Brazil. To meet this goal, three non-linear topographic factor (LS factor) equations alternately implemented in RUSLE, coupled with geographic information system (GIS) software and a variogram analysis of the response surfaces (VARSs), were used. The results showed that the average soil erosion rate in the Pardo River basin was 25.02 t/ha/yr. In addition, the GSA analysis showed that the slope angle which is associated with the LS factor was the most sensitive parameter, followed by the cover management factor (C factor) and the support practices factor (P factor) (CP factors), the specific catchment area (SCA), the sheet erosion (m), the erodibility factor (K factor), the rill (n), and the erosivity factor (R factor). The novelty of this work is that the values of parameters m and n of the LS factor can substantially affect this factor and, thus, the soil loss estimation.
- 2 December 2024
- Published by MDPI AG in Soil Systems
- Vol. 8 (4) , 125
Open AccessAssessing the Global Sensitivity of RUSLE Factors: A Case Study of Southern Bahia, Brazil
Global sensitivity analysis (GSA) of the revised universal soil loss equation (RUSLE) factors is in its infancy but is crucial to rank the importance of each factor in terms of its non-linear impact on the soil erosion rate. Hence, the goal of this study was to perform a GSA of each factor of RUSLE for a soil erosion assessment in southern Bahia, Brazil. To meet this goal, three non-linear topographic factor (LS factor) equations alternately implemented in RUSLE, coupled with geographic information system (GIS) software and a variogram analysis of the response surfaces (VARSs), were used. The results showed that the average soil erosion rate in the Pardo River basin was 25.02 t/ha/yr. In addition, the GSA analysis showed that the slope angle which is associated with the LS factor was the most sensitive parameter, followed by the cover management factor (C factor) and the support practices factor (P factor) (CP factors), the specific catchment area (SCA), the sheet erosion (m), the erodibility factor (K factor), the rill (n), and the erosivity factor (R factor). The novelty of this work is that the values of parameters m and n of the LS factor can substantially affect this factor and, thus, the soil loss estimation.
- Open Access
- 27 November 2023
- Published by Elsevier in Journal of Hydrology: Regional Studies
- Vol. 50
Deriving synthetic rating curves from a digital elevation model to delineate the inundated areas of small watersheds
- 27 November 2023
- Published by Elsevier in Journal of Hydrology: Regional Studies
- Vol. 50
Open AccessDeriving synthetic rating curves from a digital elevation model to delineate the inundated areas of small watersheds
- Open Access
- 27 March 2022
- Published by Copernicus GmbH
Development of a loosely coupled geomatic-hydrological modeling approach for flood inundation mapping in small watersheds
In Québec, Canada, extraordinary spring conditions in 2017 and 2019 have provided major incentives for the provincial government to commission the updating of current flood inundation maps. Indeed, some of these maps, dating back as far as the 1980’s, do not adequately reflect actual flood risks. Classical hydrodynamic models, such as HEC-RAS (1D, mixed, or full 2D), are generally used to perform the mapping, but they do require significant expertise, hydrometric data, and high-resolution bathymetric surveys. Given the need for updating flood inundation maps and reducing the associated financial costs (data collection and human resources), there is an emerging demand for simplified conceptual methods. In recent years, several models have been developed to fulfill this need, including the geomatic Height Above the Nearest Drainage (HAND) method which solely relies on a the digital elevation model (DEM).This project aims at expanding upon earlier work carried out with HAND which was designed to compute the required water height to flood any DEM pixel of a watershed. The information provided by HAND along with the application of the Manning equation allow for the construction of a synthetic rating curve for any homogeneous river reach. This methodological approach has been used to come up with first-instance flood inundation mapping of large rivers in conterminous United States with a matching rate reaching 90% when compared to the use of HEC-RAS. However, to our knowledge, this has not been assessed for small rivers, and our goal here is to validate this simplified conceptual approach using two small watersheds (less than 200 km²) in Quebec.The results of this study show that the ensuing synthetic rating curves for small rivers are consistent with river hydraulics (Froude numbers meeting the subcritical flow requirement behind the use of Manning equation) and in-situ derived rating curves of six hydrometric stations. The results also demonstrate the relevance of this approach when comparing the use of HAND with HEC-RAS 2D for the hydrographic networks of the two watersheds given flows simulated by a semi-distributed hydrological model (i.e., HYDROTEL). For this demonstration, the forcing data include the precipitation and temperature time series of the Canadian precipitation analysis system. Preliminary results indicate good performances (hitting rate above 60%) for the pilot river watersheds which are located in a data-sparse region.While the preliminary results illustrate the potential to produce first-instance flood inundation mapping solely based on a DEM and simulated streamflows, future work will contribute to the advancement of our understanding of flood risks in poorly-gauged watersheds. HAND-derived inundation mapping will be further analyzed and compared to HEC-RAS-2D applications (i.e., the diffusion-wave equations), although the presence of complex urban infrastructures such as culverts, pipes, or bridges may represent a major challenge for the proposed approach. We believe a modeling continuum based on hydrological modeling and HAND-derived flood inundation mapping will inform and strengthen land management planning and contribute to the elaboration of public safety protocols.
- 27 March 2022
- Published by Copernicus GmbH
Open AccessDevelopment of a loosely coupled geomatic-hydrological modeling approach for flood inundation mapping in small watersheds
In Québec, Canada, extraordinary spring conditions in 2017 and 2019 have provided major incentives for the provincial government to commission the updating of current flood inundation maps. Indeed, some of these maps, dating back as far as the 1980’s, do not adequately reflect actual flood risks. Classical hydrodynamic models, such as HEC-RAS (1D, mixed, or full 2D), are generally used to perform the mapping, but they do require significant expertise, hydrometric data, and high-resolution bathymetric surveys. Given the need for updating flood inundation maps and reducing the associated financial costs (data collection and human resources), there is an emerging demand for simplified conceptual methods. In recent years, several models have been developed to fulfill this need, including the geomatic Height Above the Nearest Drainage (HAND) method which solely relies on a the digital elevation model (DEM).This project aims at expanding upon earlier work carried out with HAND which was designed to compute the required water height to flood any DEM pixel of a watershed. The information provided by HAND along with the application of the Manning equation allow for the construction of a synthetic rating curve for any homogeneous river reach. This methodological approach has been used to come up with first-instance flood inundation mapping of large rivers in conterminous United States with a matching rate reaching 90% when compared to the use of HEC-RAS. However, to our knowledge, this has not been assessed for small rivers, and our goal here is to validate this simplified conceptual approach using two small watersheds (less than 200 km²) in Quebec.The results of this study show that the ensuing synthetic rating curves for small rivers are consistent with river hydraulics (Froude numbers meeting the subcritical flow requirement behind the use of Manning equation) and in-situ derived rating curves of six hydrometric stations. The results also demonstrate the relevance of this approach when comparing the use of HAND with HEC-RAS 2D for the hydrographic networks of the two watersheds given flows simulated by a semi-distributed hydrological model (i.e., HYDROTEL). For this demonstration, the forcing data include the precipitation and temperature time series of the Canadian precipitation analysis system. Preliminary results indicate good performances (hitting rate above 60%) for the pilot river watersheds which are located in a data-sparse region.While the preliminary results illustrate the potential to produce first-instance flood inundation mapping solely based on a DEM and simulated streamflows, future work will contribute to the advancement of our understanding of flood risks in poorly-gauged watersheds. HAND-derived inundation mapping will be further analyzed and compared to HEC-RAS-2D applications (i.e., the diffusion-wave equations), although the presence of complex urban infrastructures such as culverts, pipes, or bridges may represent a major challenge for the proposed approach. We believe a modeling continuum based on hydrological modeling and HAND-derived flood inundation mapping will inform and strengthen land management planning and contribute to the elaboration of public safety protocols.
- Open Access
- 14 November 2021
- Published by Wiley in ESS Open Archive
Floodplain mapping based on derived synthetic rating curves linked to simulated streamflows.
Rating curves are one of the most applied tools in hydrology for first instance flood analysis. However, there are often few of them in a watershed. One way to fill this gap is to derive synthetic rating curves using the conceptual model HAND (Height Above the Nearest Drainage). Indeed, this model computes the height in the nearest water course required for any location to be flooded using a Digital Elevation Model (DEM). To assess the sensitivity of the computed synthetic rating curves to its forcing parameters, a global sensitivity analysis (GSA) was performed using the VARS (Variogram Analysis of Response Surfaces) framework. Then, an a priori criteria of uniform flow such as Froude number and river reach slopes were added to identify the reaches where the model should be valid. HAND was implemented within PHYSITEL, a specialized GIS for distributed hydrological models. Synthetic rating curves were constructed using the geometric properties of a river segment and the Manning equation, providing a posteriori a mean of linking simulated stream flows to potential inundated areas. As part of the calibration process of the model, the GSA was conducted for four parameters (length of the river segment, Manning coefficients for water, forest and other), the variation of the vertical spatial resolution of the LiDAR data was considered as well for this study. This methodology was tested in two different watersheds in Quebec, Canada. Seven hydrometric stations were used as controls. The results showed that accurate synthetic rating curves can be derived with performance index such as PBIAS less than 20% and RMSE between (0.79m³/s and 10 m³/s) during the calibration. Therefore, for first instance, there is a potential to develop flood maps in areas without any hydrometric station or with a lack of high-quality bathymetric data as required by computationally intensive hydraulic models.
- 14 November 2021
- Published by Wiley in ESS Open Archive
Open AccessFloodplain mapping based on derived synthetic rating curves linked to simulated streamflows.
Rating curves are one of the most applied tools in hydrology for first instance flood analysis. However, there are often few of them in a watershed. One way to fill this gap is to derive synthetic rating curves using the conceptual model HAND (Height Above the Nearest Drainage). Indeed, this model computes the height in the nearest water course required for any location to be flooded using a Digital Elevation Model (DEM). To assess the sensitivity of the computed synthetic rating curves to its forcing parameters, a global sensitivity analysis (GSA) was performed using the VARS (Variogram Analysis of Response Surfaces) framework. Then, an a priori criteria of uniform flow such as Froude number and river reach slopes were added to identify the reaches where the model should be valid. HAND was implemented within PHYSITEL, a specialized GIS for distributed hydrological models. Synthetic rating curves were constructed using the geometric properties of a river segment and the Manning equation, providing a posteriori a mean of linking simulated stream flows to potential inundated areas. As part of the calibration process of the model, the GSA was conducted for four parameters (length of the river segment, Manning coefficients for water, forest and other), the variation of the vertical spatial resolution of the LiDAR data was considered as well for this study. This methodology was tested in two different watersheds in Quebec, Canada. Seven hydrometric stations were used as controls. The results showed that accurate synthetic rating curves can be derived with performance index such as PBIAS less than 20% and RMSE between (0.79m³/s and 10 m³/s) during the calibration. Therefore, for first instance, there is a potential to develop flood maps in areas without any hydrometric station or with a lack of high-quality bathymetric data as required by computationally intensive hydraulic models.