VLVilūnė Lapinskienė

Vilūnė Lapinskienė

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Vilūnė Lapinskienė has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluating the integration of apartment building heating systems with low-temperature district heating networks

    by Giedrė Streckienė, Juozas Bielskus, Artur Rogoža, Vilūnė Lapinskienė, Violeta Misevičiūtė

    Any renovation of apartment buildings by replacing or keeping their heating devices usually means that high temperatures of the heat carrier are maintained, which restricts boosting the efficiency of a central heating supply system. This also limits the scope for a switch to more efficient systems such as low-temperature district heating systems. To assess the impact of reducing the heat carrier temperature on indoor heating with a constant radiator area, the article investigates several alternatives alongside a base case scenario. In one scenario, the modernization of a building is examined, either by retaining the current heating devices or by substituting them with devices of equal size. Another scenario explores the modernization of a building by exchanging the heating devices and adjusting the building’s heating system to accommodate ultra-low temperatures. The possibility to reduce the temperature of the heat carrier in the heating system without any renovation of the building has been addressed as well. This led to seven alternatives. The analysis of the hourly data of the heating system model for two typical months in a heating season has revealed that when the building retains its existing area of heating devices post-renovation, the temperature can be brought down to 60/40/20 °C. It was also discovered that lowering the heat transfer temperature to ultra-low parameters (45/25/20 °C) cannot be achieved by refurbishing the buildings without increasing the number of radiators, as the heating devices will fail to deliver adequate heat for space heating.


  • Open Access

    Optimizing Ventilation Systems for Sustainable Office Buildings: Long-Term Monitoring and Environmental Impact Analysis

    by Violeta Motuzienė, Vilūnė Lapinskienė, Genrika Rynkun

    One of the key elements in meeting decarbonisation targets is improving energy efficiency in the building sector. Although much is being done at the policy level, evidence from practice shows that buildings designed and constructed for energy efficiency often do not meet the efficiency targets. This matter has particular relevance when it comes to non-residential buildings, such as offices. A common problem with existing office buildings is the inefficient management of their HVAC systems, which leads to a waste of energy. The goal of this study is to demonstrate, based on the monitoring of four relatively new offices, the extent to which mechanical ventilation leads to energy performance gaps in office buildings and to estimate the resulting environmental impact over the life cycle of the building. The monitored parameters were the occupancy and indoor environment, focusing mainly on the relationship between the actual occupancy and the CO2 concentration as a parameter representing the performance of the ventilation system. The monitoring results showed that most of the time, the buildings were over-ventilated, with the ventilation rates failing to match the actual demand, resulting in wasted energy. The actual occupancy of the monitored buildings was much lower than their design value. In two buildings, it never reached 50% of the design value. The simulation showed that simply by applying ventilation rate reduction based on a more realistic occupancy schedule, the primary energy demand decreased by 30%. Thus, the building’s annual CO2 emissions could be reduced by up to 12.5%. These findings help to fill in the knowledge gap as to why the building sector is struggling to decarbonise. The results of this work are of great practical value in showing investors, designers and managers the importance of a properly automated and managed building. The practical value of the results was enhanced by the fact that the timeline of the data covered by the analysis began before and ended after the COVID-19 pandemic, making it possible to assess the fine aspects of managing systems in light of the new realities of a changing work culture and office occupancy.


  • Open Access

    A Review of the Life Cycle Analysis Results for Different Energy Conversion Technologies

    by Violeta Motuzienė, Kęstutis Čiuprinskas, Artur Rogoža, Vilūnė Lapinskienė

    Technologies that use renewable energy sources (RES) are crucial to achieving decarbonization goals, but a significant number of studies show their relatively high environmental impact during the production phase. Therefore, technologies need to be compared in terms of their life-cycle environmental impact. The life cycle analysis (LCA) methodology is well known and widely employed. However, problems related to the methodological choices prevent taking full advantage of the LCA, as the results of numerous studies are often incomparable. The presented review aims to critically compare the impact of different energy generation technologies—RES (as well as non-RES) energy generators and co-generators. The numeric results are structured and analyzed in terms of the global warming potential (GWP) and non-RES primary energy consumption. The results show that RES technologies are superior compared to conventional fossil-fuel-based systems in most cases, and the high impact during the production and installation phases is compensated in the operational phase. The high variations in GWP from similar technologies result from different methodological choices, but they also show that the wrong choice of the technology in a certain location might cause serious environmental drawbacks when the impact of the RES technology exceeds the impact of fossil fuel-based technologies. Cogeneration technologies using waste as a fuel may even have a negative GWP impact, thus showing even higher potential for decarbonization than RES technologies.