Yuliu Li

Microplastics (MPs) have become a widespread environmental contaminant, raising concern due to their persistence, capacity to transport pollutants, and potential risks to ecosystems and human health. Their increasing global production, prolonged degradation, and ubiquity in aquatic environments underscore the need for improved monitoring and mitigation strategies. Current findings indicate widespread MP contamination, including within the human body, emphasizing significant ecological and health concerns. This review examines the definition, sources, environmental transport mechanisms, associated risks, and current detection methods for MPs in natural and engineered water systems. The methods discussed encompass a broad range of analytical and sensing technologies used to identify, characterize, and quantify MPs across diverse environmental matrices. The review highlights that no single technique is sufficient for comprehensive MP analysis; instead, the combination of multiple methods enhances sensitivity, specificity, and reliability. Progress in automated sample preparation, advanced sensing platforms and standardized methodologies is key to improving detection efficiency and comparability across different studies. In particular, the extensive body of scientific literature underscores the imperative for standardized and harmonized protocols regarding data collection and analysis, as well as homogeneous limits of detection and units of measurement. Reducing MP pollution will require interdisciplinary collaboration, regulatory action, and increased public awareness to protect environmental integrity and human health.

Microplastics (MPs) have become a widespread environmental contaminant, raising concern due to their persistence, capacity to transport pollutants, and potential risks to ecosystems and human health. Their increasing global production, prolonged degra-dation, and ubiquity in aquatic environments underscore the need for improved strategies for monitoring and mitigation. This review examines the definition, sources, environmental transport mechanisms, associated risks, and current detection methods for MPs in natural and engineered water systems. The methods discussed encompass a broad range of analytical and sensing technologies used to identify, characterize, and quantify MPs across diverse environmental matrices. The review highlights that no single technique is sufficient for comprehensive MP analysis; instead, the combination of multiple methods enhances sensitivity, specificity, and reliability. Current findings indicate widespread MP contamination, including within the human body, emphasizing significant ecological and health concerns. Progress in automated sample preparation, standardized protocols, and advanced sensing platforms is key to improving detection efficiency and comparability across different studies. Overall, the evidence presented supports the need for strengthened monitoring, continued technological innovation, and coordinated mitigation policies. Reducing MP pollution will require interdisciplinary collaboration, regulatory action, and increased public awareness to protect environ-mental integrity and human health.

Layered double hydroxides (LDHs) consist of two-dimensional, positively charged lamellar structures with the ability to host various anions in the interlayer spaces, which grants them unique properties and tunable characteristics. LDHs, a class of versatile inorganic compounds, have recently emerged as promising candidates for enhancing osseointegration. A suitable alkaline microenvironment is thought to be beneficial for stimulating osteoblasts’ differentiation (responsible for bone matrix formation) while suppressing osteoclast generation (responsible for bone matrix disintegration). LDHs are prone to adjusting their alkalinity and thus offering us the chance to study how pH affects cellular behavior. LDHs can indeed modulate the local pH, inflammatory responses, and oxidative stress levels, factors that profoundly influence the behavior of osteogenic cells and their interactions with the implant surface. Herein, we deposited Mg–Fe LDH films on titanium substrates for dental implants. The modified Ti substrates was more alkaline in comparison to the bare ones, with a pH higher than 8 after hydrolysis in an aqueous environment.

Microplastics (MPs) have recently been acknowledged as a new major and ubiquitous environmental pollutant with still unclear, yet potentially high, risks for different ecosystems and human health. Nevertheless, quantitative identification protocols rely on long and subjective visual counting necessarily performed on microscopes by well-trained operators. In this study, an automatic, fast, portable, and inexpensive method for the quantitative detection of MPs in water is proposed. The system is based on the typical optical setup of a fluorescence confocal microscope specifically adapted to automatically count dye-stained MPs in flowing liquids using a low-power laser beam. The fluorescence pulses emitted by flowing MPs are revealed and processed by a specific software using a pattern recognition algorithm to discriminate and count real fluorescence pulses out of noise fluctuations. The system was calibrated with commercial orange fluorescent 10 µm and 1 µm polystyrene microspheres, and remarkable agreement with theoretical predictions was obtained regarding different parameters. Tests were also performed with laboratory-prepared MPs dispersed in different types of real water samples. In this case, the agreement with theory was slightly worse and differences found in the quantitative results require further investigation. However, the present study demonstrated the proof of concept of a method for quick automated MP counting in water.

Microplastics (MPs) have recently emerged as a new major and ubiquitous environmental pollutant with still undefined, yet potentially high risks for human health and ecosystems. This has prompted growing public concern along with an increasing number of scientific studies. In particular, recent research has highlighted the need for a standardized methodology to monitor microplastics in different media, particularly in water. This study reports on the use of a new particle counter for the quantitative detection of MPs in water samples based on real-time analysis of fluorescence emissions. The instrument was calibrated using two types of plastic particles, i.e., polyvinyl chloride and high-density polyethylene, selected as examples of high- and low-density plastics, respectively. Specific solvents were used to match the different plastic densities. Measurements were also carried out on particles obtained from wastewater samples collected at the inlet and outlet of specific units of a municipal wastewater treatment plant after sieving, filtering, digestion with hydrogen peroxide to remove degradable organic matter and resuspension in the solvents employed during the calibration step. A Fourier transform infrared spectroscopy analysis performed on the same wastewater samples confirmed the presence of MPs, and, in particular, of polyethylene, in some of the samples in which the highest concentrations were measured applying the proposed method. Therefore, the novel particle counter described in this paper could represent a promising method to quantitatively measure MP concentrations in water samples.

Fluoride excess in water represents an environmental issue and a risk for human health since it can cause several diseases, such as fluorosis, osteoporosis, and damage of the nervous system. Layered double hydroxides (LDHs) can be exploited to remove this contaminant from water by taking advantage of their high ion-exchange capability. LDHs are generally mixed with polluted water in the form of powders, which then cause the problem of uneasy separation of the contaminated LDH sludge from the purified liquid. In this work, Zn–Al LDH films were directly grown in situ on aluminum foams that acted both as the reactant and substrate. This method enabled the removal of fluoride ions by simple immersion, with ensuing withdrawal of the foam from the de-contaminated water. Different LDH synthesis methods and aluminum foam types were investigated to improve the adsorption process. The contact time, initial fluoride concentration, adsorbent dosage, and pH were studied as the parameters that affect the fluoride adsorption capacity and efficiency. The highest absorption efficiency of approximately 70% was obtained by using two separate growth methods after four hours, and it effectively reduced the fluoride concentration from 3 mg/L to 1.1 mg/L, which is below the threshold value set by WHO for drinking water.

We present the direct and one-step Rieche formylation of carbon nanotubes (CNTs) as the most effective (4.00 mmol g⁻¹) functionalization route via formylation.