Eliomar R. Conde Duque
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Eliomar R. Conde Duque has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Alfeu Joaozinho Sguarezi Filho
Universidade Federal do ABC
7 shared publications - Angelo Lunardi
Center for Engineering, Modeling and Applied Social Sciences, Federal University of ABC, Santo Andr, São Paulo, Brazil
6 shared publications - Darlan Alexandria Fernandes
Federal University of Paraíba image/svg+xml
3 shared publications - Jack Stanley Bryant
Electrical and Biomedical Engineering, School of Engineering, RMIT University, Melbourne 3001, Australia
1 shared publication - Jefferson Rafael Pereira De Assis
Universidade Federal de Campina Grande
1 shared publication - Juan Sebastian Solis Chaves
Universidad ECCI
1 shared publication
Latest Publications
- Open Access
Improvement of Robustness of MPC Adding Repetitive Behavior for the DFIG Current Control
This paper shows an increase in the robustness of a DFIG-based wind energy system when a predictive-repetitive controller in the reference frame is used for the control of the rotor current. This designing approach proposes a model predictive control with a receding horizon technique that uses the frequency decomposition of the reference signal as a filter. Furthermore, an augmented space-state model from the original plant model is obtained, and its implementation is addressed from the perspective of normal operating conditions of DFIG in wind energy systems. Additionally, this repetitive controller increases the robustness of the predictive control when a mismatch in machine parameters is considered. Experimental results presented in this paper endorse the advantages of this controller.Open AccessImprovement of Robustness of MPC Adding Repetitive Behavior for the DFIG Current Control
This paper shows an increase in the robustness of a DFIG-based wind energy system when a predictive-repetitive controller in the reference frame is used for the control of the rotor current. This designing approach proposes a model predictive control with a receding horizon technique that uses the frequency decomposition of the reference signal as a filter. Furthermore, an augmented space-state model from the original plant model is obtained, and its implementation is addressed from the perspective of normal operating conditions of DFIG in wind energy systems. Additionally, this repetitive controller increases the robustness of the predictive control when a mismatch in machine parameters is considered. Experimental results presented in this paper endorse the advantages of this controller. - 10 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (5) , 5809-5818
A Predictive Repetitive Current Control in Stationary Reference Frame for DFIG Systems Under Distorted Voltage Operation
This article presents a stationary reference frame implementation of the predictive repetitive controller under ideal and nonideal stator voltage conditions. Thanks to the combination of the model predictive control (MPC) and the repetitive control techniques, the predictive repetitive control uses the capabilities of both techniques to achieve the control objectives without the need of using a PLL for the stator flux in ideal conditions as the approach is developed in the stationary reference frame $\alpha \beta $ . For the operation of the technique, it is also not necessary to know the harmonic content of the nonideal stator voltage beforehand, but, for this case, and given the nature of the distortions, the use of the PLL is necessary to estimate the phase angle and the magnitude of the voltage’s fundamental component. This means a great advantage over previous techniques due to the fact that special considerations are not needed over the mathematical model of the doubly fed induction generator (DFIG). Experimental results of the proposed technique are presented in ideal and nonideal grid conditions, and under variable rotor speed. Moreover, a comparison with the classic MPC technique is presented.
- 10 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (5) , 5809-5818
A Predictive Repetitive Current Control in Stationary Reference Frame for DFIG Systems Under Distorted Voltage Operation
This article presents a stationary reference frame implementation of the predictive repetitive controller under ideal and nonideal stator voltage conditions. Thanks to the combination of the model predictive control (MPC) and the repetitive control techniques, the predictive repetitive control uses the capabilities of both techniques to achieve the control objectives without the need of using a PLL for the stator flux in ideal conditions as the approach is developed in the stationary reference frame $\alpha \beta $ . For the operation of the technique, it is also not necessary to know the harmonic content of the nonideal stator voltage beforehand, but, for this case, and given the nature of the distortions, the use of the PLL is necessary to estimate the phase angle and the magnitude of the voltage’s fundamental component. This means a great advantage over previous techniques due to the fact that special considerations are not needed over the mathematical model of the doubly fed induction generator (DFIG). Experimental results of the proposed technique are presented in ideal and nonideal grid conditions, and under variable rotor speed. Moreover, a comparison with the classic MPC technique is presented.
- Open Access
Robust Predictive Control with Three-Vector Modulation Connected to the Power Grid
Robust predictive control is presented in this article using a three-vector modulation for a grid-connected three-phase inverter. The aims of this article are proposing a robust controller that is able to deal with some variations of parameters that occur in practical systems and demonstrating the performance of the controller with experimental tests that change the inductance and consequently the parasitic resistance of the plant; the same controller can predictive the changes to obtain the optimal performance. The article also presents mathematical modeling for plants and controllers and a modulation method to solve the variable frequency problem. Experimental tests corroborate the expected results and validate the controller’s efficiency according to the control system analysis requirements and the IEEE 1547.2-2008 standard.
Open AccessRobust Predictive Control with Three-Vector Modulation Connected to the Power Grid
Robust predictive control is presented in this article using a three-vector modulation for a grid-connected three-phase inverter. The aims of this article are proposing a robust controller that is able to deal with some variations of parameters that occur in practical systems and demonstrating the performance of the controller with experimental tests that change the inductance and consequently the parasitic resistance of the plant; the same controller can predictive the changes to obtain the optimal performance. The article also presents mathematical modeling for plants and controllers and a modulation method to solve the variable frequency problem. Experimental tests corroborate the expected results and validate the controller’s efficiency according to the control system analysis requirements and the IEEE 1547.2-2008 standard.
- 15 January 2022
- Published by Elsevier
- p. 157-190
Implementation of DFIG MPC-WM and three-phase power CCG MPRC-WM using Simulink/MATLAB®
- 15 January 2022
- Published by Elsevier
- p. 157-190
Implementation of DFIG MPC-WM and three-phase power CCG MPRC-WM using Simulink/MATLAB®
- Open Access
Model Predictive Control with Modulator Applied to Grid Inverter under Voltage Distorted
This research paper presents a model of predictive control with a modulator for the inverter linked to the electrical grid, using the stationary reference frame and operating under grid distorted voltage. The stationary reference frame model for the system is obtained in its fundamental frequency and then the model predictive technique is implemented, which predicts the system actions using the obtained system model without the need of any other harmonic consideration. The controller calculates the voltage vector of the inverter through the minimization of the cost function. Thus, the proposal demonstrates, through experiments, its positive results regarding the low impact of the distorted voltage in the grid current without using any harmonic consideration on the model. Experimental results and comparisons carried out endorse the proposal of this work.
Open AccessModel Predictive Control with Modulator Applied to Grid Inverter under Voltage Distorted
This research paper presents a model of predictive control with a modulator for the inverter linked to the electrical grid, using the stationary reference frame and operating under grid distorted voltage. The stationary reference frame model for the system is obtained in its fundamental frequency and then the model predictive technique is implemented, which predicts the system actions using the obtained system model without the need of any other harmonic consideration. The controller calculates the voltage vector of the inverter through the minimization of the cost function. Thus, the proposal demonstrates, through experiments, its positive results regarding the low impact of the distorted voltage in the grid current without using any harmonic consideration on the model. Experimental results and comparisons carried out endorse the proposal of this work.
- 21 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 9 (4) , 4354-4363
Current Control for DFIG Systems Under Distorted Voltage Using Predictive–Repetitive Control
This article presents a predictive–repetitive control for rotor current control operating under voltage harmonic distortion for a doubly fed induction generator in a synchronous reference frame. Predictive–repetitive control is an approach that uses receding horizon by predictive control with frequency decomposition of the reference signal. Moreover, to apply in wind energy, the predictive–repetitive control is implemented and designed from the perspectives of the power system. This controller is designed by using the state-space model of the plant, and the experimental results with voltage harmonic distortions are presented to prove the proposal.
- 21 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 9 (4) , 4354-4363
Current Control for DFIG Systems Under Distorted Voltage Using Predictive–Repetitive Control
This article presents a predictive–repetitive control for rotor current control operating under voltage harmonic distortion for a doubly fed induction generator in a synchronous reference frame. Predictive–repetitive control is an approach that uses receding horizon by predictive control with frequency decomposition of the reference signal. Moreover, to apply in wind energy, the predictive–repetitive control is implemented and designed from the perspectives of the power system. This controller is designed by using the state-space model of the plant, and the experimental results with voltage harmonic distortions are presented to prove the proposal.
- Open Access
Power System Stability with Power-Electronic Converter Interfaced Renewable Power Generation: Present Issues and Future Trends
The energy sector is currently undergoing a rapid transformation with the integration of power electronic converter (PEC)-interfaced renewable energy sources (RES), such as wind and solar photovoltaic (PV) systems, at both the transmission and distribution networks. Power system stability has been significantly influenced by this power grid transformation. This paper comprehensively reviews major power system stability issues affected due to large-scale integration of PEC-interfaced RES in power grids, with some example case studies relevant for each stability category. According to the review, stability issues are mainly originating from reduction in synchronous inertia, reduction in reactive power reserve, low short-circuit strength of the power network, and fault ride-through (FRT) strategy/capability of the PEC-interfaced RES. Decrease in synchronous inertia could affect both the rotor angle stability and the frequency stability, while decrease in short-circuit strength and reactive power reserve could cause voltage stability and rotor angle stability issues in power networks. Sub-synchronous control interactions are also receiving a lot of attention by the power industry due to increasing oscillatory stability incidents reported in power networks with PEC-interfaced RES. FRT capabilities/strategies of PEC-interfaced RES are also playing a pivotal role in power grid stability due to its influence on active and reactive power, hence more emphasis should be placed on FRT schemes of PEC-interfaced RES, since future power grids are expected to operate with 100% PEC-interfaced generation sources. Stability improvement strategies could be implemented to address multiple stability issues in PEC-interfaced power networks; however, rigorous stability studies are required to identify the optimal conditions to implement these improvement strategies. Furthermore, ongoing structural changes in power grids to accommodate remotely sited PEC-interfaced RES are also influencing the stability of power grids. Therefore, all these factors must be carefully considered by system operators when planning and operating power grids in a secure and stable manner with high penetration levels of PEC-interfaced RES.
Open AccessPower System Stability with Power-Electronic Converter Interfaced Renewable Power Generation: Present Issues and Future Trends
The energy sector is currently undergoing a rapid transformation with the integration of power electronic converter (PEC)-interfaced renewable energy sources (RES), such as wind and solar photovoltaic (PV) systems, at both the transmission and distribution networks. Power system stability has been significantly influenced by this power grid transformation. This paper comprehensively reviews major power system stability issues affected due to large-scale integration of PEC-interfaced RES in power grids, with some example case studies relevant for each stability category. According to the review, stability issues are mainly originating from reduction in synchronous inertia, reduction in reactive power reserve, low short-circuit strength of the power network, and fault ride-through (FRT) strategy/capability of the PEC-interfaced RES. Decrease in synchronous inertia could affect both the rotor angle stability and the frequency stability, while decrease in short-circuit strength and reactive power reserve could cause voltage stability and rotor angle stability issues in power networks. Sub-synchronous control interactions are also receiving a lot of attention by the power industry due to increasing oscillatory stability incidents reported in power networks with PEC-interfaced RES. FRT capabilities/strategies of PEC-interfaced RES are also playing a pivotal role in power grid stability due to its influence on active and reactive power, hence more emphasis should be placed on FRT schemes of PEC-interfaced RES, since future power grids are expected to operate with 100% PEC-interfaced generation sources. Stability improvement strategies could be implemented to address multiple stability issues in PEC-interfaced power networks; however, rigorous stability studies are required to identify the optimal conditions to implement these improvement strategies. Furthermore, ongoing structural changes in power grids to accommodate remotely sited PEC-interfaced RES are also influencing the stability of power grids. Therefore, all these factors must be carefully considered by system operators when planning and operating power grids in a secure and stable manner with high penetration levels of PEC-interfaced RES.