Pengfei Ji
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pengfei Ji has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Weifeng He
Shanghai Jiao Tong University
3 shared publications Wenmiao Lin
3 shared publicationsZhang Luo
3 shared publicationsMingche Lai
2 shared publications- Mingche Lai
National University of Defense Technology
2 shared publications Shi Xu
2 shared publications
Latest Publications
- 21 August 2025
- Published by Elsevier in Optics & Laser Technology
- Vol. 192
A WDM-Based Multi-Operand Adder with the Bit-Width Scalable Time-Domain Electronic-Photonic Computing Method
- 21 August 2025
- Published by Elsevier in Optics & Laser Technology
- Vol. 192
A WDM-Based Multi-Operand Adder with the Bit-Width Scalable Time-Domain Electronic-Photonic Computing Method
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (8) , 3739-3748
A Step-Reduced Impedance Transition Design for Bandwidth Enhancement in OC-MZM Transmitters
High-efficiency open-circuit-driven Mach-Zehnder modulator (OC-MZM) transmitters are susceptible to drive signal reflections that degrade signal quality. Conventional impedance matching suppresses reflection noise but limits the transmitter bandwidth. This paper presents a novel step-reduced impedance transition design scheme for the drive signal transmission path in OC-MZM transmitter that balances bandwidth enhancement and reflection suppression. Specifically, a negative reflection bandwidth enhancement technique is proposed to compensate for the high-frequency loss of the MZM traveling-wave electrodes by introducing a signal pre-emphasis effect. To prevent excessive reflections that inversely degrade signal quality, we utilize the eye-opening ratio (EOR) of the MZM average modulation voltage to assist in impedance optimization. An experimental OC-MZM transmitter prototype featuring the proposed impedance transition design demonstrated a 20% enhancement in transmitter bandwidth, a 101.4% improvement in eye-opening, and a reduction in TDECQ to 0.88 dB at 53 Gbaud, compared with the traditional impedance matching design.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (8) , 3739-3748
A Step-Reduced Impedance Transition Design for Bandwidth Enhancement in OC-MZM Transmitters
High-efficiency open-circuit-driven Mach-Zehnder modulator (OC-MZM) transmitters are susceptible to drive signal reflections that degrade signal quality. Conventional impedance matching suppresses reflection noise but limits the transmitter bandwidth. This paper presents a novel step-reduced impedance transition design scheme for the drive signal transmission path in OC-MZM transmitter that balances bandwidth enhancement and reflection suppression. Specifically, a negative reflection bandwidth enhancement technique is proposed to compensate for the high-frequency loss of the MZM traveling-wave electrodes by introducing a signal pre-emphasis effect. To prevent excessive reflections that inversely degrade signal quality, we utilize the eye-opening ratio (EOR) of the MZM average modulation voltage to assist in impedance optimization. An experimental OC-MZM transmitter prototype featuring the proposed impedance transition design demonstrated a 20% enhancement in transmitter bandwidth, a 101.4% improvement in eye-opening, and a reduction in TDECQ to 0.88 dB at 53 Gbaud, compared with the traditional impedance matching design.
- 8 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (10) , 3786-3798
An Electro-Optic Mixed Structure Multiplier with an Optical Delay Accumulation Scheme in Time-Domain
This work presents a novel multiplier design methodology with an electro-optic mixed structure based on time-domain accumulation. Especially, it employs complementary metal oxide semiconductor (CMOS) logic gates to generate partial products in electrical domain because of the simplicity of Boolean operation with low hardware overhead. Then, an optical delay accumulation (ODA) structure is proposed to accumulate all partial products in time-domain, to avoid the issues of logic cascadability, fan-out and power loss encountered in prior all-optical and optical-directed logic-based multipliers. At last, a time-to-digital converter (TDC) is presented to generate the final product back in a digital value. To verify the functionality and evaluate the performance, an 8-bit electro-optic mixture structure multiplier is developed and simulations show that the proposed design can operate at 20 GHz and the average computation delay is 1.25 ns with 28 nm CMOS process and compatible silicon optical device. The time consumption is reduced by 37.8% in average compared with the electrical Shift-and-Add multiplier. In addition, for 8-bit, 16-bit and 32-bit multipliers, the proposed multiplier can reduce optical device cost by 99.01%, 99.59%, and 99.82% respectively, as well as decrease power loss by 79%, 79% and 81% compared to prior optical designs.
- 8 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (10) , 3786-3798
An Electro-Optic Mixed Structure Multiplier with an Optical Delay Accumulation Scheme in Time-Domain
This work presents a novel multiplier design methodology with an electro-optic mixed structure based on time-domain accumulation. Especially, it employs complementary metal oxide semiconductor (CMOS) logic gates to generate partial products in electrical domain because of the simplicity of Boolean operation with low hardware overhead. Then, an optical delay accumulation (ODA) structure is proposed to accumulate all partial products in time-domain, to avoid the issues of logic cascadability, fan-out and power loss encountered in prior all-optical and optical-directed logic-based multipliers. At last, a time-to-digital converter (TDC) is presented to generate the final product back in a digital value. To verify the functionality and evaluate the performance, an 8-bit electro-optic mixture structure multiplier is developed and simulations show that the proposed design can operate at 20 GHz and the average computation delay is 1.25 ns with 28 nm CMOS process and compatible silicon optical device. The time consumption is reduced by 37.8% in average compared with the electrical Shift-and-Add multiplier. In addition, for 8-bit, 16-bit and 32-bit multipliers, the proposed multiplier can reduce optical device cost by 99.01%, 99.59%, and 99.82% respectively, as well as decrease power loss by 79%, 79% and 81% compared to prior optical designs.
- 13 July 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (15) , 27333-27345
Crosstalk suppression for high-density traveling-wave MZM array based on static and dynamic combined analysis and circuit-level designs
Electrical crosstalk severely degrades the performance of Mach-Zehnder modulator (MZM) array. However, conventional crosstalk suppression techniques incur losses of large amounts of chip area for signal isolation, which becomes a bottleneck of high-density electronic-photonic integrated circuit. In this paper, the electrical crosstalk of Traveling-Wave MZM array is originally analyzed with static and dynamic combined crosstalk coefficients. Circuit-level suppression techniques of differential dual-drive electrode schemes with tightly coupled electrode pairs and a virtual ground structure with full-matching termination circuit are investigated for noise-removing effects. Simulation results show that the dynamic electrical crosstalk coefficient between two adjacent modulators is reduced to below 1.5%, which is five times lower than the baseline. The electro-optical link measurements show that the BER is significantly reduced from 1E-3 to 1E-12 for multi-channel operation, which confirms the effectiveness of the crosstalk suppression techniques.
- 13 July 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (15) , 27333-27345
Crosstalk suppression for high-density traveling-wave MZM array based on static and dynamic combined analysis and circuit-level designs
Electrical crosstalk severely degrades the performance of Mach-Zehnder modulator (MZM) array. However, conventional crosstalk suppression techniques incur losses of large amounts of chip area for signal isolation, which becomes a bottleneck of high-density electronic-photonic integrated circuit. In this paper, the electrical crosstalk of Traveling-Wave MZM array is originally analyzed with static and dynamic combined crosstalk coefficients. Circuit-level suppression techniques of differential dual-drive electrode schemes with tightly coupled electrode pairs and a virtual ground structure with full-matching termination circuit are investigated for noise-removing effects. Simulation results show that the dynamic electrical crosstalk coefficient between two adjacent modulators is reduced to below 1.5%, which is five times lower than the baseline. The electro-optical link measurements show that the BER is significantly reduced from 1E-3 to 1E-12 for multi-channel operation, which confirms the effectiveness of the crosstalk suppression techniques.
- Open Access
- 26 November 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (48)
Self-adaptive cardiac optogenetics device based on negative stretching-resistive strain sensor
A closed-loop and self-adaptive cardiac optogenetics is realized by a negative stretching-resistive strain sensor.
- 26 November 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (48)
Open AccessSelf-adaptive cardiac optogenetics device based on negative stretching-resistive strain sensor
A closed-loop and self-adaptive cardiac optogenetics is realized by a negative stretching-resistive strain sensor.