Jinlong Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jinlong Wang has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Shuangxi Nie
Guangxi University
18 shared publications - Tao Liu
Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industry and Food Engineering, Guangxi University, Nanning, China
17 shared publications - Bin Luo
School of Light Industry and Food Engineering Guangxi University Nanning China
15 shared publications - Song Zhang
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, PR China
14 shared publications - Yanhua Liu
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, PR China
14 shared publications - Chenchen Cai
School of Light Industry and Food Engineering Guangxi University Nanning P. R. China
13 shared publications
Latest Publications
- 29 May 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (37) , e73549
Bioinspired Ultrastretchable Aramid Triboelectric Aerogels for Intelligent Vehicle Seat
Aerogels have demonstrated considerable potential in the field of flexible sensors owing to the tunability of porous architectures. The brittleness and low stretchability induced by high porosity remain key limitations restricting aerogel applications. Inspired by the orientation of muscle fibers, an ultrastretchable aramid triboelectric aerogel is developed by programmed ice crystal growth. The orientation fitting degree of the triboelectric aerogel reaches 98%, which is 2.6 times higher than that of conventional freeze‐casting methods. This ordered structure disperses tensile stresses during stretching, enabling the triboelectric aerogel to sustain an unprecedented 539% strain. Leveraging this aerogel, the triboelectric sensing array with vibration feedback was designed. Combined with deep learning algorithms, it achieved real‐time monitoring and vibration feedback alerts of driving behaviors within a single sensor interface for the first time. This study offers a promising strategy for intelligent driving systems to identify and mitigate unsafe driving behaviors.
- 29 May 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (37) , e73549
Bioinspired Ultrastretchable Aramid Triboelectric Aerogels for Intelligent Vehicle Seat
Aerogels have demonstrated considerable potential in the field of flexible sensors owing to the tunability of porous architectures. The brittleness and low stretchability induced by high porosity remain key limitations restricting aerogel applications. Inspired by the orientation of muscle fibers, an ultrastretchable aramid triboelectric aerogel is developed by programmed ice crystal growth. The orientation fitting degree of the triboelectric aerogel reaches 98%, which is 2.6 times higher than that of conventional freeze‐casting methods. This ordered structure disperses tensile stresses during stretching, enabling the triboelectric aerogel to sustain an unprecedented 539% strain. Leveraging this aerogel, the triboelectric sensing array with vibration feedback was designed. Combined with deep learning algorithms, it achieved real‐time monitoring and vibration feedback alerts of driving behaviors within a single sensor interface for the first time. This study offers a promising strategy for intelligent driving systems to identify and mitigate unsafe driving behaviors.
- Open Access
- 14 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Topological isomerization unlocks exceptional elasticity and strength of cellulosic triboelectric aerogels
Aerogel materials often aim for high elasticity, which typically compromises strength. This challenge in balancing elasticity and strength constrains their applications in wearable circuits, intelligent robots, and flexible sensors. This study presents a topological isomerization strategy based on molecular chain rearrangement to enhance both the elasticity and strength of cellulosic triboelectric aerogels. During the molecular chain rearrangement, ethylenediamine forms competitive hydrogen bonds with hydroxyl groups, disrupting the inherent hydrogen bond network of cellulose and exposing additional active hydroxyl groups. Furthermore, through in situ interfacial polymerization and covalent crosslinking, a polymer topological network is established. This results in a flexible cellulosic triboelectric aerogel with improved elasticity and strength; even after 20,000 cycles of compression, the aerogel exhibited a recoverability exceeding 95% and could support loads over 2000 times its own weight. Concurrently, the transformation of the crystal structure due to the reconstruction of the hydrogen bond network leads to the rearrangement of surface functional groups, which modifies the surface potential and ensures stable triboelectric output across a broad range of temperatures and humidity levels. This strategy provides innovative methods for the design and fabrication of lightweight, ultra-elastic, and extreme-environment-resistant 3D porous materials, which are essential for advancing next-generation sensor devices.
- 14 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessTopological isomerization unlocks exceptional elasticity and strength of cellulosic triboelectric aerogels
Aerogel materials often aim for high elasticity, which typically compromises strength. This challenge in balancing elasticity and strength constrains their applications in wearable circuits, intelligent robots, and flexible sensors. This study presents a topological isomerization strategy based on molecular chain rearrangement to enhance both the elasticity and strength of cellulosic triboelectric aerogels. During the molecular chain rearrangement, ethylenediamine forms competitive hydrogen bonds with hydroxyl groups, disrupting the inherent hydrogen bond network of cellulose and exposing additional active hydroxyl groups. Furthermore, through in situ interfacial polymerization and covalent crosslinking, a polymer topological network is established. This results in a flexible cellulosic triboelectric aerogel with improved elasticity and strength; even after 20,000 cycles of compression, the aerogel exhibited a recoverability exceeding 95% and could support loads over 2000 times its own weight. Concurrently, the transformation of the crystal structure due to the reconstruction of the hydrogen bond network leads to the rearrangement of surface functional groups, which modifies the surface potential and ensures stable triboelectric output across a broad range of temperatures and humidity levels. This strategy provides innovative methods for the design and fabrication of lightweight, ultra-elastic, and extreme-environment-resistant 3D porous materials, which are essential for advancing next-generation sensor devices.
- Top Cited PapersOpen Access
- 29 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Bioinspired triboelectric droplet sensor for ammonia monitoring
Gas sensors with fast response are in high demand for environmental and health applications. Conventional solid-state sensing materials are inherently constrained by response delays arising from chemical bond transformations, posing significant challenges in overcoming response time lag. In this work, inspired by the alveoli of our respiratory system, we develop a triboelectric nanogenerator probe sensor driven by the formation of water droplets containing an air cavity, which incorporates NH3 molecules. The sensor achieves rapid response through instantaneous electron transfer at the liquid-solid interface, bypassing the need for gas adsorption and desorption on the surface of solid-state sensing materials. This hydro-electrochemical sensing mechanism achieves a response time of 1.4 s, surpassing that of most reported ammonia sensors. Through the integration of deep learning algorithms for optimization, the sensor demonstrates an ammonia detection accuracy of 96.2%. This study indicates a promising strategy for the rational design of gas sensors based on hydro-electrochemical sensing mechanisms.
- 29 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Top Cited PapersOpen AccessBioinspired triboelectric droplet sensor for ammonia monitoring
Gas sensors with fast response are in high demand for environmental and health applications. Conventional solid-state sensing materials are inherently constrained by response delays arising from chemical bond transformations, posing significant challenges in overcoming response time lag. In this work, inspired by the alveoli of our respiratory system, we develop a triboelectric nanogenerator probe sensor driven by the formation of water droplets containing an air cavity, which incorporates NH3 molecules. The sensor achieves rapid response through instantaneous electron transfer at the liquid-solid interface, bypassing the need for gas adsorption and desorption on the surface of solid-state sensing materials. This hydro-electrochemical sensing mechanism achieves a response time of 1.4 s, surpassing that of most reported ammonia sensors. Through the integration of deep learning algorithms for optimization, the sensor demonstrates an ammonia detection accuracy of 96.2%. This study indicates a promising strategy for the rational design of gas sensors based on hydro-electrochemical sensing mechanisms.
- Top Cited PapersOpen Access
- 3 January 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-10
Triboelectric tactile sensor for pressure and temperature sensing in high-temperature applications
Skin-like sensors capable of detecting multiple stimuli simultaneously have great potential in cutting-edge human-machine interaction. However, realizing multimodal tactile recognition beyond human tactile perception still faces significant challenges. Here, an extreme environments-adaptive multimodal triboelectric sensor was developed, capable of detecting pressure/temperatures beyond the range of human perception. Based on triboelectric nanogenerator technology, an asymmetric structure capable of independently outputting dual signals was designed to improve perception sensitivity. By converting the signals and the stimuli into feature matrices, parallel perception of complex objects (with a recognition rate of 94%) and temperature at high temperatures was achieved. The proposed multimodal triboelectric tactile sensor represents progress in maximum detection range and rapid response, realizing the upper limit of human skin’s high-temperature sensing (60 °C) with a working temperature of 200 °C. The proposed self-powered multimodal sensing system offers a wider range of possibilities for human/robot/environment interaction applications.
- 3 January 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-10
Top Cited PapersOpen AccessTriboelectric tactile sensor for pressure and temperature sensing in high-temperature applications
Skin-like sensors capable of detecting multiple stimuli simultaneously have great potential in cutting-edge human-machine interaction. However, realizing multimodal tactile recognition beyond human tactile perception still faces significant challenges. Here, an extreme environments-adaptive multimodal triboelectric sensor was developed, capable of detecting pressure/temperatures beyond the range of human perception. Based on triboelectric nanogenerator technology, an asymmetric structure capable of independently outputting dual signals was designed to improve perception sensitivity. By converting the signals and the stimuli into feature matrices, parallel perception of complex objects (with a recognition rate of 94%) and temperature at high temperatures was achieved. The proposed multimodal triboelectric tactile sensor represents progress in maximum detection range and rapid response, realizing the upper limit of human skin’s high-temperature sensing (60 °C) with a working temperature of 200 °C. The proposed self-powered multimodal sensing system offers a wider range of possibilities for human/robot/environment interaction applications.
- 29 August 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (36) , 11319-11326
Triboelectrically Empowered Biomimetic Heterogeneous Wettability Surface for Efficient Fog Collection
Biomimetic engineering surfaces featuring heterogeneous wettability are vital for atmospheric water harvesting applications. Existing research predominantly focuses on the coordinated regulation of surface wettability through structural and chemical modifications, often overlooking the prevalent triboelectric charge effect at the liquid-solid interface. In this work, we designed a heterogeneous wettability surface by strategic masking and activated its latent triboelectric charge using triboelectric brushes, thereby enhancing the removal and renewal of surface droplets. By examining the dynamic evolution of droplets, the mechanism of triboelectric enhancement in the water collection efficiency is elucidated. Leveraging this inherent triboelectric charge interaction, fog collection capacity can be augmented by 29% by activating the system for 5 s every 60 s. Consequently, the advancement of triboelectric charge-enhanced fog collection technology holds both theoretical and practical significance for overcoming the limitations of traditional surface wettability regulation.
- 29 August 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (36) , 11319-11326
Triboelectrically Empowered Biomimetic Heterogeneous Wettability Surface for Efficient Fog Collection
Biomimetic engineering surfaces featuring heterogeneous wettability are vital for atmospheric water harvesting applications. Existing research predominantly focuses on the coordinated regulation of surface wettability through structural and chemical modifications, often overlooking the prevalent triboelectric charge effect at the liquid-solid interface. In this work, we designed a heterogeneous wettability surface by strategic masking and activated its latent triboelectric charge using triboelectric brushes, thereby enhancing the removal and renewal of surface droplets. By examining the dynamic evolution of droplets, the mechanism of triboelectric enhancement in the water collection efficiency is elucidated. Leveraging this inherent triboelectric charge interaction, fog collection capacity can be augmented by 29% by activating the system for 5 s every 60 s. Consequently, the advancement of triboelectric charge-enhanced fog collection technology holds both theoretical and practical significance for overcoming the limitations of traditional surface wettability regulation.
- 1 August 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (32) , 21316-21325
Smart Lanceolate Surface with Fast Fog-Digesting Performance for Triboelectric Energy Harvesting
Utilizing the ubiquitous fog in nature to create decentralized energy-harvesting devices, free from geographical and hydrological constraints, presents an opportunity to foster sustainable power generation. Extracting electrical energy from fog relies heavily on fog-digesting performance. Improving the efficiency of fogwater utilization remains a formidable challenge for existing fogwater energy-harvesting technologies. Inspired by the water-harvesting behavior of Tillandsia leaves, a smart lanceolate surface is developed to harvest triboelectric energy by rapidly digesting fog. Such a surface exhibits capabilities in fog management, encompassing precise fog capture, transportation, and critical droplet separation. Specifically, fog droplets condense at hydrophilic sites of acylated cellulose ester, subsequently migrating toward the rear under Laplace pressure, thereby producing energy as they traverse through the tail end. Such architecture yields a brief voltage restoration period (with an average of 9.36 s), can rush the capacitor to 11.59 V within 20 s, and achieves a water-digestion rate of up to 71.05 kg/m2 h. This biomimetic approach enhances the water-digestion efficacy of the atmospheric water energy apparatus and offers perspectives on mitigating deficiencies in power resources.
- 1 August 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (32) , 21316-21325
Smart Lanceolate Surface with Fast Fog-Digesting Performance for Triboelectric Energy Harvesting
Utilizing the ubiquitous fog in nature to create decentralized energy-harvesting devices, free from geographical and hydrological constraints, presents an opportunity to foster sustainable power generation. Extracting electrical energy from fog relies heavily on fog-digesting performance. Improving the efficiency of fogwater utilization remains a formidable challenge for existing fogwater energy-harvesting technologies. Inspired by the water-harvesting behavior of Tillandsia leaves, a smart lanceolate surface is developed to harvest triboelectric energy by rapidly digesting fog. Such a surface exhibits capabilities in fog management, encompassing precise fog capture, transportation, and critical droplet separation. Specifically, fog droplets condense at hydrophilic sites of acylated cellulose ester, subsequently migrating toward the rear under Laplace pressure, thereby producing energy as they traverse through the tail end. Such architecture yields a brief voltage restoration period (with an average of 9.36 s), can rush the capacitor to 11.59 V within 20 s, and achieves a water-digestion rate of up to 71.05 kg/m2 h. This biomimetic approach enhances the water-digestion efficacy of the atmospheric water energy apparatus and offers perspectives on mitigating deficiencies in power resources.
- 14 June 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (25) , 7809-7818
Phase-Directed Assembly of Triboelectric Nanopaper for Self-Powered Noncontact Sensing
Noncontact sensing technology serves as a pivotal medium for seamless data acquisition and intelligent perception in the era of the Internet of Things (IoT), bringing innovative interactive experiences to wearable human-machine interaction perception networks. However, the pervasive limitations of current noncontact sensing devices posed by harsh environmental conditions hinder the precision and stability of signals. In this study, the triboelectric nanopaper prepared by a phase-directed assembly strategy is presented, which possesses low charge transfer mobility (1618 cm2 V-1 s-1) and exceptional high-temperature stability. Wearable self-powered noncontact sensors constructed from triboelectric nanopaper operate stably under high temperatures (200 °C). Furthermore, a temperature warning system for workers in hazardous environments is demonstrated, capable of nonintrusively identifying harmful thermal stimuli and detecting motion status. This research not only establishes a technological foundation for accurate and stable noncontact sensing under high temperatures but also promotes the sustainable intelligent development of wearable IoT devices under extreme environments.
- 14 June 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (25) , 7809-7818
Phase-Directed Assembly of Triboelectric Nanopaper for Self-Powered Noncontact Sensing
Noncontact sensing technology serves as a pivotal medium for seamless data acquisition and intelligent perception in the era of the Internet of Things (IoT), bringing innovative interactive experiences to wearable human-machine interaction perception networks. However, the pervasive limitations of current noncontact sensing devices posed by harsh environmental conditions hinder the precision and stability of signals. In this study, the triboelectric nanopaper prepared by a phase-directed assembly strategy is presented, which possesses low charge transfer mobility (1618 cm2 V-1 s-1) and exceptional high-temperature stability. Wearable self-powered noncontact sensors constructed from triboelectric nanopaper operate stably under high temperatures (200 °C). Furthermore, a temperature warning system for workers in hazardous environments is demonstrated, capable of nonintrusively identifying harmful thermal stimuli and detecting motion status. This research not only establishes a technological foundation for accurate and stable noncontact sensing under high temperatures but also promotes the sustainable intelligent development of wearable IoT devices under extreme environments.
- 29 May 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (23) , 7125-7133
Directional Moisture-Wicking Triboelectric Materials Enabled by Laplace Pressure Differences
Wearable sensors are experiencing vibrant growth in the fields of health monitoring systems and human motion detection, with comfort becoming a significant research direction for wearable sensing devices. However, the weak moisture-wicking capability of sensor materials leads to liquid retention, severely restricting the comfort of the wearable sensors. This study employs a pattern-guided alignment strategy to construct microhill arrays, endowing triboelectric materials with directional moisture-wicking capability. Within 2.25 s, triboelectric materials can quickly and directionally remove the droplets, driven by the Laplace pressure differences and the wettability gradient. The directional moisture-wicking triboelectric materials exhibit excellent pressure sensing performance, enabling rapid response/recovery (29.1/37.0 ms), thereby achieving real-time online monitoring of human respiration and movement states. This work addresses the long-standing challenge of insufficient moisture-wicking driving force in flexible electronic sensing materials, holding significant implications for enhancing the comfort and application potential of electronic skin and wearable electronic devices.
- 29 May 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (23) , 7125-7133
Directional Moisture-Wicking Triboelectric Materials Enabled by Laplace Pressure Differences
Wearable sensors are experiencing vibrant growth in the fields of health monitoring systems and human motion detection, with comfort becoming a significant research direction for wearable sensing devices. However, the weak moisture-wicking capability of sensor materials leads to liquid retention, severely restricting the comfort of the wearable sensors. This study employs a pattern-guided alignment strategy to construct microhill arrays, endowing triboelectric materials with directional moisture-wicking capability. Within 2.25 s, triboelectric materials can quickly and directionally remove the droplets, driven by the Laplace pressure differences and the wettability gradient. The directional moisture-wicking triboelectric materials exhibit excellent pressure sensing performance, enabling rapid response/recovery (29.1/37.0 ms), thereby achieving real-time online monitoring of human respiration and movement states. This work addresses the long-standing challenge of insufficient moisture-wicking driving force in flexible electronic sensing materials, holding significant implications for enhancing the comfort and application potential of electronic skin and wearable electronic devices.
- Top Cited Papers
- 18 March 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (12) , 3826-3834
High Strength and Toughness Polymeric Triboelectric Materials Enabled by Dense Crystal-Domain Cross-Linking
Lightweight, easily processed, and durable polymeric materials play a crucial role in wearable sensor devices. However, achieving simultaneously high strength and toughness remains a challenge. This study addresses this by utilizing an ion-specific effect to control crystalline domains, enabling the fabrication of a polymeric triboelectric material with tunable mechanical properties. The dense crystal-domain cross-linking enhances energy dissipation, resulting in a material boasting both high tensile strength (58.0 MPa) and toughness (198.8 MJ m-3), alongside a remarkable 416.7% fracture elongation and 545.0 MPa modulus. Leveraging these properties, the material is successfully integrated into wearable self-powered devices, enabling real-time feedback on human joint movement. This work presents a valuable strategy for overcoming the strength-toughness trade-off in polymeric materials, paving the way for their enhanced applicability and broader use in diverse sensing applications.
- 18 March 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (12) , 3826-3834
Top Cited PapersHigh Strength and Toughness Polymeric Triboelectric Materials Enabled by Dense Crystal-Domain Cross-Linking
Lightweight, easily processed, and durable polymeric materials play a crucial role in wearable sensor devices. However, achieving simultaneously high strength and toughness remains a challenge. This study addresses this by utilizing an ion-specific effect to control crystalline domains, enabling the fabrication of a polymeric triboelectric material with tunable mechanical properties. The dense crystal-domain cross-linking enhances energy dissipation, resulting in a material boasting both high tensile strength (58.0 MPa) and toughness (198.8 MJ m-3), alongside a remarkable 416.7% fracture elongation and 545.0 MPa modulus. Leveraging these properties, the material is successfully integrated into wearable self-powered devices, enabling real-time feedback on human joint movement. This work presents a valuable strategy for overcoming the strength-toughness trade-off in polymeric materials, paving the way for their enhanced applicability and broader use in diverse sensing applications.
- Top Cited Papers
- 1 March 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (10) , 3273-3281
Lightweight and Strong Cellulosic Triboelectric Materials Enabled by Cell Wall Nanoengineering
As intelligent technology surges forward, wearable electronics have emerged as versatile tools for monitoring health and sensing our surroundings. Among these advancements, porous triboelectric materials have garnered significant attention for their lightness. However, these materials face the challenge of improving structural stability to further enhance the sensing accuracy of triboelectric sensors. In this study, a lightweight and strong porous cellulosic triboelectric material is designed by cell wall nanoengineering. By tailoring of the cell wall structure, the material shows a high mechanical strength of 51.8 MPa. The self-powered sensor constructed by this material has a high sensitivity of 33.61 kPa-1, a fast response time of 36 ms, and excellent pressure detection durability. Notably, the sensor still enables a high sensing performance after the porous cellulosic triboelectric material exposure to 200 °C and achieves real-time feedback of human motion, thereby demonstrating great potential in the field of wearable electronic devices.
- 1 March 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (10) , 3273-3281
Top Cited PapersLightweight and Strong Cellulosic Triboelectric Materials Enabled by Cell Wall Nanoengineering
As intelligent technology surges forward, wearable electronics have emerged as versatile tools for monitoring health and sensing our surroundings. Among these advancements, porous triboelectric materials have garnered significant attention for their lightness. However, these materials face the challenge of improving structural stability to further enhance the sensing accuracy of triboelectric sensors. In this study, a lightweight and strong porous cellulosic triboelectric material is designed by cell wall nanoengineering. By tailoring of the cell wall structure, the material shows a high mechanical strength of 51.8 MPa. The self-powered sensor constructed by this material has a high sensitivity of 33.61 kPa-1, a fast response time of 36 ms, and excellent pressure detection durability. Notably, the sensor still enables a high sensing performance after the porous cellulosic triboelectric material exposure to 200 °C and achieves real-time feedback of human motion, thereby demonstrating great potential in the field of wearable electronic devices.