Carlos A. Franco Prieto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Carlos A. Franco Prieto has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Alejandro Coca-Castro
The Alan Turing Institute, London, UK
2 shared publications - Patricia Escudero Montañez
Instituto Geográfico Agustín Codazzi
2 shared publications - Pedro Karin Serrato Alvarez
Instituto Geográfico Agustín Codazzi
2 shared publications - Victoria Daniela Camacho Ochoa
Investigador Instituto Geográfico Agustín Codazzi
2 shared publications - Andrés Felipe López1 shared publication
Angie L. Avendaño-Gomez
Instituto Geográfico Agustín Codazzi
1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by Walter de Gruyter GmbH in Journal of Geodetic Science
- Vol. 15 (1)
Building a large-scale surface gravity network in Colombia using highly redundant measurements
This article presents a large-scale surface gravity network in Colombia, developed during a 3-year collaboration between Ohio State University (OSU) and Colombia’s national mapping agency, the Instituto Geográfico Agustín Codazzi. The network spans approximately one-third of the country’s surface area and consists of 498 stations, including 22 absolute gravity (AG) constraints. We applied the OSU field protocol and adjustment technique, extending it to address the challenge of traffic-induced noise at benchmarks located near major roads. Our methodology employed measurements with an unusually high degree of redundancy, with 87% of the gravity lines surveyed using a minimum of four relative gravimeters. Additionally, we utilized both automatic (Scintrex CG-6) and manual (LaCoste and Romberg Model G) instruments to leverage their complementary strengths in different environments. The resulting gravity values were determined with a typical uncertainty (1 sigma) of ± 0.03 mGal. The leave-one-out cross-validation tests using the AG stations demonstrated the robustness of our solution, with all residuals statistically indistinguishable from zero. Our findings show that the combination of enhanced observational redundancy and the use of multiple gravimeter types effectively mitigates measurement challenges under suboptimal conditions, with only a modest increase in field time.
- 1 January 2025
- Published by Walter de Gruyter GmbH in Journal of Geodetic Science
- Vol. 15 (1)
Open AccessBuilding a large-scale surface gravity network in Colombia using highly redundant measurements
This article presents a large-scale surface gravity network in Colombia, developed during a 3-year collaboration between Ohio State University (OSU) and Colombia’s national mapping agency, the Instituto Geográfico Agustín Codazzi. The network spans approximately one-third of the country’s surface area and consists of 498 stations, including 22 absolute gravity (AG) constraints. We applied the OSU field protocol and adjustment technique, extending it to address the challenge of traffic-induced noise at benchmarks located near major roads. Our methodology employed measurements with an unusually high degree of redundancy, with 87% of the gravity lines surveyed using a minimum of four relative gravimeters. Additionally, we utilized both automatic (Scintrex CG-6) and manual (LaCoste and Romberg Model G) instruments to leverage their complementary strengths in different environments. The resulting gravity values were determined with a typical uncertainty (1 sigma) of ± 0.03 mGal. The leave-one-out cross-validation tests using the AG stations demonstrated the robustness of our solution, with all residuals statistically indistinguishable from zero. Our findings show that the combination of enhanced observational redundancy and the use of multiple gravimeter types effectively mitigates measurement challenges under suboptimal conditions, with only a modest increase in field time.
- Open Access
- 16 December 2021
- Published by Instituto Panamericano de Geografia e Historia in Revista Cartográfica
- No. 104,p. 103-131
Aproximación a la evaluación de la exactitud temática de cartografía geomorfológica
La evaluación de la exactitud temática (EETM), en la cartografía temática, constituye un indicador de confiabilidad del producto generado mediante el reconocimiento del medio biofísico. Sin embargo, aunque existen varias investigaciones y desarrollos alrededor de la EETM, especialmente orientadas a la cartografía de cobertura y uso de la tierra, existen otros tópicos como la geomorfología que requiere profundizar en este tipo de valoración. En esta investigación, se desarrolló una propuesta metodológica para la EETM de la cartografía geomorfológica, que comprendió dos componentes generales 1. Temático y 2. Estadístico, que incluyeron varios procesos como la revisión y selección de insumos de sensores remotos y cartografía temática a escala 1:25.000, la activación del ambiente de control de calidad para la capa de geomorfología, la realización del diseño de muestreo estadístico, la verificación de la exactitud temática, y la generación y análisis de una matriz de confusión. Los resultados obtenidos en esta iniciativa brindan una alternativa para realizar la verificación temática de los productos que se generen con base en variables estadísticas y proporciona una métrica de la confiablidad de los mapas geomorfológicos que garantice a los usuarios finales (internos y externos) su calidad y usabilidad, así mismo facilita los procesos de verificación de la cartografía geomorfológica.
- 16 December 2021
- Published by Instituto Panamericano de Geografia e Historia in Revista Cartográfica
- No. 104,p. 103-131
Open AccessAproximación a la evaluación de la exactitud temática de cartografía geomorfológica
La evaluación de la exactitud temática (EETM), en la cartografía temática, constituye un indicador de confiabilidad del producto generado mediante el reconocimiento del medio biofísico. Sin embargo, aunque existen varias investigaciones y desarrollos alrededor de la EETM, especialmente orientadas a la cartografía de cobertura y uso de la tierra, existen otros tópicos como la geomorfología que requiere profundizar en este tipo de valoración. En esta investigación, se desarrolló una propuesta metodológica para la EETM de la cartografía geomorfológica, que comprendió dos componentes generales 1. Temático y 2. Estadístico, que incluyeron varios procesos como la revisión y selección de insumos de sensores remotos y cartografía temática a escala 1:25.000, la activación del ambiente de control de calidad para la capa de geomorfología, la realización del diseño de muestreo estadístico, la verificación de la exactitud temática, y la generación y análisis de una matriz de confusión. Los resultados obtenidos en esta iniciativa brindan una alternativa para realizar la verificación temática de los productos que se generen con base en variables estadísticas y proporciona una métrica de la confiablidad de los mapas geomorfológicos que garantice a los usuarios finales (internos y externos) su calidad y usabilidad, así mismo facilita los procesos de verificación de la cartografía geomorfológica.
- Open Access
- 24 November 2021
- Published by Revista Brasileira de Ciencia do Solo in Revista Brasileira de Ciência do Solo
- Vol. 45
Optimized data-driven pipeline for digital mapping of quantitative and categorical properties of soils in Colombia
Soil maps provide a method for graphically communicating what is known about the spatial distribution of soil properties in nature. We proposed an optimized pipeline, named dino-soil toolbox, programmed in the R software for mapping quantitative and categorical properties of legacy soil data. The pipeline, composed of four main modules (data preprocessing, covariates selection, exploratory data analysis and modeling), was tested across a study area of 14,537 km 2 located between the departments of Cesar and Magdalena, Colombia. We [...] ABSTRACT Soil maps provide a method for graphically communicating what is known about the spatial distribution of soil properties in nature. We proposed an optimized pipeline, named dino-soil toolbox, programmed in the R software for mapping quantitative and categorical properties of legacy soil data. The pipeline, composed of four main modules (data preprocessing, covariates selection, exploratory data analysis and modeling), was tested across a study area of 14,537 km 2 located between the departments of Cesar and Magdalena, Colombia. We
- 24 November 2021
- Published by Revista Brasileira de Ciencia do Solo in Revista Brasileira de Ciência do Solo
- Vol. 45
Open AccessOptimized data-driven pipeline for digital mapping of quantitative and categorical properties of soils in Colombia
Soil maps provide a method for graphically communicating what is known about the spatial distribution of soil properties in nature. We proposed an optimized pipeline, named dino-soil toolbox, programmed in the R software for mapping quantitative and categorical properties of legacy soil data. The pipeline, composed of four main modules (data preprocessing, covariates selection, exploratory data analysis and modeling), was tested across a study area of 14,537 km 2 located between the departments of Cesar and Magdalena, Colombia. We [...] ABSTRACT Soil maps provide a method for graphically communicating what is known about the spatial distribution of soil properties in nature. We proposed an optimized pipeline, named dino-soil toolbox, programmed in the R software for mapping quantitative and categorical properties of legacy soil data. The pipeline, composed of four main modules (data preprocessing, covariates selection, exploratory data analysis and modeling), was tested across a study area of 14,537 km 2 located between the departments of Cesar and Magdalena, Colombia. We
- Open Access
- 21 July 2021
- Published by Universitat Politecnica de Valencia in Revista de Teledetección
- No. 58,p. 71-88
Evaluación de algoritmos de clasificación en la plataforma Google Earth Engine para la identificación y detección de cambios de construcciones rurales y periurbanas a partir de imágenes de alta resolución
Building change detection based on remote sensing imagery is a key task for land management and planning e.g., detection of illegal settlements, updating land records and disaster response. Under the post- classification comparison approach, this research aimed to evaluate the feasibility of several classification algorithms to identify and capture buildings and their change between two time steps using very-high resolution images (<1 m/pixel) across rural areas and urban/rural perimeter boundaries. Through an App implemented on the Google Earth Engine (GEE) platform, we selected two study areas in Colombia with different images and input data. In total, eight traditional classification algorithms, three unsupervised (K-means, X-Means y Cascade K-Means) and five supervised (Random Forest, Support Vector Machine, Naive Bayes, GMO maximum Entropy and Minimum distance) available at GEE were trained. Additionally, a deep neural network named Feature Pyramid Networks (FPN) was added and trained using a pre-trained model, EfficientNetB3 model. Three evaluation zones per study area were proposed to quantify the performance of the algorithms through the Intersection over Union (IoU) metric. This metric, with a range between 0 and 1, represents the degree of overlapping between two regions, where the higher agreement the higher IoU values. The results indicate that the models configured with the FPN network have the best performance followed by the traditional supervised algorithms. The performance differences were specific to the study area. For the rural area, the best FPN configuration obtained an IoU averaged for both time steps of 0.4, being this four times higher than the best supervised model, Support Vector Machines using a linear kernel with an average IoU of 0.1. Regarding the setting of urban/rural perimeter boundaries, this difference was less marked, having an average IoU of 0.53 in comparison to 0.38 obtained by the best supervised classification model, in this case Random Forest. The results are relevant for institutions tracking the dynamics of building areas from cloud computing platfo future assessments of classifiers in likewise platforms in other contexts.
- 21 July 2021
- Published by Universitat Politecnica de Valencia in Revista de Teledetección
- No. 58,p. 71-88
Open AccessEvaluación de algoritmos de clasificación en la plataforma Google Earth Engine para la identificación y detección de cambios de construcciones rurales y periurbanas a partir de imágenes de alta resolución
Building change detection based on remote sensing imagery is a key task for land management and planning e.g., detection of illegal settlements, updating land records and disaster response. Under the post- classification comparison approach, this research aimed to evaluate the feasibility of several classification algorithms to identify and capture buildings and their change between two time steps using very-high resolution images (<1 m/pixel) across rural areas and urban/rural perimeter boundaries. Through an App implemented on the Google Earth Engine (GEE) platform, we selected two study areas in Colombia with different images and input data. In total, eight traditional classification algorithms, three unsupervised (K-means, X-Means y Cascade K-Means) and five supervised (Random Forest, Support Vector Machine, Naive Bayes, GMO maximum Entropy and Minimum distance) available at GEE were trained. Additionally, a deep neural network named Feature Pyramid Networks (FPN) was added and trained using a pre-trained model, EfficientNetB3 model. Three evaluation zones per study area were proposed to quantify the performance of the algorithms through the Intersection over Union (IoU) metric. This metric, with a range between 0 and 1, represents the degree of overlapping between two regions, where the higher agreement the higher IoU values. The results indicate that the models configured with the FPN network have the best performance followed by the traditional supervised algorithms. The performance differences were specific to the study area. For the rural area, the best FPN configuration obtained an IoU averaged for both time steps of 0.4, being this four times higher than the best supervised model, Support Vector Machines using a linear kernel with an average IoU of 0.1. Regarding the setting of urban/rural perimeter boundaries, this difference was less marked, having an average IoU of 0.53 in comparison to 0.38 obtained by the best supervised classification model, in this case Random Forest. The results are relevant for institutions tracking the dynamics of building areas from cloud computing platfo future assessments of classifiers in likewise platforms in other contexts.