Winatta Sakdasri

Rambutan seeds are by-products generated from fruit-processing factories; the leftover seeds are buried in landfills, generating methane emissions. This work aimed to extract polysaccharides (POLS) from rambutan seeds by using subcritical water extraction (SWE). The effects of defatting pretreatment and operating parameters in SWE were investigated using a Box–Behnken design. The results show that defatting pretreatment significantly enriched the POLS yield, while it had no significant effect on the total sugar content. Using the desirability approach, the suitable feedstock for SWE was defatted rambutan seeds. The maximum desirability of 0.86 was found at a temperature range of 145–150 °C, an extraction time of 15 min, and a liquid–solid ratio of 10:1. The POLS yield and total sugar content were in the range of 52.33–55.63 g/100 g feedstock and 83.37–87.45 g/100 g POLS, respectively. The extracted POLS had an equivalent molecular weight of 413.70 kDa that could be used as an extender in plant-based products. In conclusion, the defatting pretreatment of rambutan seeds not only improved the POLS yield obtained via SWE but also generated additional lipids that could be utilized as an unconventional source of specialty fat.

Rambutan seeds (RS) are industrial waste often generated in the canned fruit industry. The aim of this study was to extract polysaccharides from defatted rambutan seeds or crude polysaccharides (POLS-DRSs) with subcritical water. Defatted seed powder (DRS) was extracted by hot-water extraction (HWE) at 100 °C as a reference condition. Subcritical water extraction (SWE) was performed at 120–140 °C and an initial pressure of 2 MPa. A sample-to-water ratio of 1:10 (w/w) and an extraction time of 15–60 min were used for both methods. The results show that gravimetric extraction yields of 53.01 g/100 g DRS and 7.71–41.70 g/100 g DRS were obtained from HWE and SWE, respectively. Additionally, HWE provided a total sugar content of 30.75 g/100 g POLS-DRSs, while SWE generated a total sugar content in the range of 27.00–49.76 g/100 POLS-DRSs. The antioxidant activities of POLS-DRSs were measured with a 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay. An amount of 40 mg of POLS-DRSs obtained at 120 °C after 60 min provided the highest DPPH activity of 82.93% inhibition. The POLS-DRSs were suitable for growing microorganisms because they had a high sugar content and a low total phenolic content. A prebiotic activity assay will be carried out in future studies.

Spent coffee grounds (SCGs) are currently considered abandoned landfill waste despite retaining valuable organic compounds, especially with a high protein content of 16.64 ± 0.13 g/g dried SCGs and a high oil content of 15.48 ± 0.17 g/g dried SCGs. As a result, SCGs could serve as a potential source of valuable ingredients. However, utilizing a single technical strategy of alternative green extractions was insufficient for extracting the target compounds and hydrolyzing proteins. This work aimed to optimize the operating parameters of enzyme-assisted extraction (EAE), microwave-assisted extraction (MAE), and subcritical water extraction (SWE) using a response surface methodology. The results showed that EAE, at a papain-to-substrate ratio (E/S) of 0.5 and a duration of 15 min, generated a %DH of 93.39% and provided a water soluble protein concentration (WSPC) in the range of 400 to 800 µg/mL. Moreover, MAE provided a maximum %DH of 9.72% at 600 watts and 10 min, while SWE produced a maximum %DH of 13.41% at 160 °C in 17.5 min. However, the WSPCs of MAE and SWE extracts were comparable at ~250 µg/mL. The combination MAE−SWE enhanced the %DH of hydrolysates by more than the combined SWE−MAE, SWE, and MAE. However, the effects of differential hydrolysis on bioactivity are not directly correlated with %DH. In this study, the highest antioxidant activity was found at an E/S of 0.5 and in 15 min for EAE, at 350 W and in 10 min for MAE, and at 160 °C and in 30 min for SWE. This work demonstrated that the valorization of SCGs not only reduces the amount of waste but also yields functional cosmeceutical and nutraceutical ingredients.

To reduce the burning of lemon basil straw (LBS)—the byproduct of basil seed production—we propose utilizing LBS as a replacement substrate for mushroom cultivation. LBS can stimulate both mycelial growth and percentage biological efficiency; however, the rigidity of this material limits particle size reduction. In this work, aqueous extractions were facilely performed without using either hazardous chemicals or complex procedures to valorize LBS as a stimulator for gray oyster mushroom cultivation. An aqueous extraction at solid-to-liquid of 50 g/L was employed. The macerated-LBS and decocted-LBS extracts were tested for mycelial growth in potato dextrose agar and sorghum grains. Following this, both aqueous extracts were applied as a wetting agent in cylindrical baglog cultivation to estimate mycelial growth, biological efficiency, and productivity. It was found that LBS extracts insignificantly enhanced the mycelia growth rate on all media, while the diluted LBS (1:1 v/v) extracts improved 1.5-fold of percentage biological efficiency. Gas chromatograph-mass spectrometer results indicated 9-octadecaenamide is a major component in LBS aqueous extract. Results demonstrated that the LBS extract is a good stimulator for the production of Pleurotus mushroom.

Black cumin (Nigella sativa L.) seed oil consists of many volatile oils dissolved in the fixed oil. In this work, the seed oil samples were obtained from supercritical CO₂ (SCCO₂) extraction under various pressures (20.0–30.0 MPa) and temperatures (40–60 °C). The volatile compound fingerprints of SCCO₂-extracted oils were analyzed by static headspace-gas chromatography (SH-GC-FID) without using any organic solvent. The comparison of volatile compound fingerprints of SCCO₂ and n-hexane extracts was compared with the direct analysis of milled seed.

Spent coffee grounds (SCGs) are a by-product of the food industry which contain a rich source of polysaccharides. This research was to study the extraction of polysaccharides from SCGs by environmentally friendly technic of pressurized hot water. The process optimization was investigated by response surface methodology (RSM) to produce the highest extraction yield with a different temperature of 80–120 °C, a pressure of 4–12 bars, and an extracted time of 60–180 min. The pressurized hot water showed an efficient technique to recover polysaccharides from SCG.