Junjie Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Junjie Wang has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Jianzhi Li
Key Laboratory of Structural Health Monitoring and Control, Shijiazhuang Tiedao University, Shijiazhuang 050043, China
3 shared publications - Yiyao Zhao
School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China
2 shared publications - Bohao Shen
School of Mechanical Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China
1 shared publication
Latest Publications
- Open Access
- 30 October 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (11) , 1868
Prediction Method of Steel Corrosion Rate Based on the Helix Distributed Sensor
Corrosion of steel bars is of great significance for safety and service life of reinforced concrete structures. This work develops a prediction method for steel corrosion mass loss rate before the crack of concrete structure based on a spiral distributed fiber optic sensor. Reinforced concrete sample instrumented with a spiral distributed fiber optic sensor were prepared. The mathematic relationship between the corrosion mass loss rate of steel bar and the spiral distributed strain is theoretically derived. Meanwhile, numerical analysis by MATLAB shows that these parameters such as the protective layer thickness, corrosion mass loss rate, bar diameter, corrosion expansion coefficient have a remarkable influence on spiral distributed strain. Additionally, electrical accelerated corrosion experiment was performed on the reinforced concrete specimens. The helix strain along the distributed sensor was used to evaluate the corrosion mass loss of steel bar. Further, the influencing factors on the corrosion sensitivity are illustrated here and the corrosion mass loss rate before concrete crack is also quantified. This research provides insights into the corrosion deteriorate mechanism.
- 30 October 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (11) , 1868
Open AccessPrediction Method of Steel Corrosion Rate Based on the Helix Distributed Sensor
Corrosion of steel bars is of great significance for safety and service life of reinforced concrete structures. This work develops a prediction method for steel corrosion mass loss rate before the crack of concrete structure based on a spiral distributed fiber optic sensor. Reinforced concrete sample instrumented with a spiral distributed fiber optic sensor were prepared. The mathematic relationship between the corrosion mass loss rate of steel bar and the spiral distributed strain is theoretically derived. Meanwhile, numerical analysis by MATLAB shows that these parameters such as the protective layer thickness, corrosion mass loss rate, bar diameter, corrosion expansion coefficient have a remarkable influence on spiral distributed strain. Additionally, electrical accelerated corrosion experiment was performed on the reinforced concrete specimens. The helix strain along the distributed sensor was used to evaluate the corrosion mass loss of steel bar. Further, the influencing factors on the corrosion sensitivity are illustrated here and the corrosion mass loss rate before concrete crack is also quantified. This research provides insights into the corrosion deteriorate mechanism.
- Open Access
- 29 November 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (12) , 1479
A Combined Positioning Method Used for Identification of Concrete Cracks
Fully distributed fiber optic sensors are characteristically used for the measurement of long distances and continuous distribution of space. However, due to the different fiber type, fiber length, ambient temperature and strain, fully distributed fiber optic sensors fail to locate damage accurately and cause a greater error. Therefore, this paper proposes a new positioning method of combining fully distributed fiber optic sensors with fiber Bragg gratings, which enables accurately the localization of a structural damage during the long-term monitoring of fully distributed fiber optic sensors. Moreover, the coupling mechanism of the reflected light from fiber grating and excited Brillouin scattering light is illustrated. Further, it is experimentally verified by locating the cracks of 2 m long reinforced concrete beams. The experimental results show that this proposed method is capable of monitoring the generation of the beam crack and further locating the crack on the concrete beam with an approximate error of 10 cm.
- 29 November 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (12) , 1479
Open AccessA Combined Positioning Method Used for Identification of Concrete Cracks
Fully distributed fiber optic sensors are characteristically used for the measurement of long distances and continuous distribution of space. However, due to the different fiber type, fiber length, ambient temperature and strain, fully distributed fiber optic sensors fail to locate damage accurately and cause a greater error. Therefore, this paper proposes a new positioning method of combining fully distributed fiber optic sensors with fiber Bragg gratings, which enables accurately the localization of a structural damage during the long-term monitoring of fully distributed fiber optic sensors. Moreover, the coupling mechanism of the reflected light from fiber grating and excited Brillouin scattering light is illustrated. Further, it is experimentally verified by locating the cracks of 2 m long reinforced concrete beams. The experimental results show that this proposed method is capable of monitoring the generation of the beam crack and further locating the crack on the concrete beam with an approximate error of 10 cm.
- Open Access
- 26 November 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (12) , 1451
A Spiral Distributed Monitoring Method for Steel Rebar Corrosion
This paper proposes a novel spiral-wound, optic-fiber sensor to monitor the corrosion of steel bars. At the same time, the winding parameters, such as winding angle and pitch, were first theoretically deduced. Then, to decrease light loss, a practically distributed sensor wound onto the protective mortar layer was developed by increasing the winding curvature radius. The spiral distributed sensors were experimentally verified for their feasibility. Experimental results showed that the spiral fiber strain depended on the thickness of the protective mortar layer. Furthermore, the spiral distributed strain well reflected the cracking process of concrete. In addition, the concrete cracking time depended on the thickness of the protective concrete layer. Accordingly, this method is feasible for evaluating the initial and final cracking behaviors of concrete structures and provides a sight for steel bar corrosion.
- 26 November 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (12) , 1451
Open AccessA Spiral Distributed Monitoring Method for Steel Rebar Corrosion
This paper proposes a novel spiral-wound, optic-fiber sensor to monitor the corrosion of steel bars. At the same time, the winding parameters, such as winding angle and pitch, were first theoretically deduced. Then, to decrease light loss, a practically distributed sensor wound onto the protective mortar layer was developed by increasing the winding curvature radius. The spiral distributed sensors were experimentally verified for their feasibility. Experimental results showed that the spiral fiber strain depended on the thickness of the protective mortar layer. Furthermore, the spiral distributed strain well reflected the cracking process of concrete. In addition, the concrete cracking time depended on the thickness of the protective concrete layer. Accordingly, this method is feasible for evaluating the initial and final cracking behaviors of concrete structures and provides a sight for steel bar corrosion.