Nathan P. Petersen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Nathan P. Petersen has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Eric Loren Severson
Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN, USA
6 shared publications - Timothy Slininger
Department of Electrical and Computer Engineering, University of Wisconsin-Madison, Madison, WI, USA
2 shared publications - Anirudh Upadhyaya
Department of Electrical and Computer Engineering, University of Wisconsin-Madison, 1415 Engineering Dr., Madison, WI 53706, USA
1 shared publication - Anvar Khamitov
Department of Electrical and Computer Engineering, University of Wisconsin-Madison, Madison, WI, USA
1 shared publication Aravind Manoj Nair
Department of Electrical and Computer Engineering, University of Wisconsin-Madison, Madison, WI, USA
1 shared publicationLogan Rapp
1 shared publication
Latest Publications
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 41 (2) , 1136-1148
Design of Sensorless Bearingless Motors for Displacement Estimation Using Mutual Inductance
Bearingless motors can produce electromagnetic torque and force using a single machine. The forces are often used to actively levitate the rotor which requires high-bandwidth displacement sensor feedback. These sensors add undesired cost, bulk, and cabling to the drive system. To mitigate these issues, the motor itself can be used as the rotor displacement sensor in a “sensorless” or “self-sensing” approach. Based on electromagnetic variation due to rotor eccentricity, real-time self-sensing control algorithms can generate estimates of rotor displacement which can be used for levitation feedback signals. This work proposes a framework for motor design specifically to optimize for self-sensing capability. The main goal is to understand and maximize the displacement self-sensing sensitivity and linearity. A multi-objective optimization is used to explore the design space and quantify performance trade-offs in power conversion, force actuation, and self-sensing. Leveraging the optimization results, a prototype sensorless bearingless motor is fabricated and tested. Its eccentric-rotor inductance is measured statically versus frequency and rotor angle, showing less than 10% mutual inductance ripple. Real-time online self-sensing results are provided which demonstrate 15 µm resolution displacement estimates at 800 Hz bandwidth during transient motion.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 41 (2) , 1136-1148
Design of Sensorless Bearingless Motors for Displacement Estimation Using Mutual Inductance
Bearingless motors can produce electromagnetic torque and force using a single machine. The forces are often used to actively levitate the rotor which requires high-bandwidth displacement sensor feedback. These sensors add undesired cost, bulk, and cabling to the drive system. To mitigate these issues, the motor itself can be used as the rotor displacement sensor in a “sensorless” or “self-sensing” approach. Based on electromagnetic variation due to rotor eccentricity, real-time self-sensing control algorithms can generate estimates of rotor displacement which can be used for levitation feedback signals. This work proposes a framework for motor design specifically to optimize for self-sensing capability. The main goal is to understand and maximize the displacement self-sensing sensitivity and linearity. A multi-objective optimization is used to explore the design space and quantify performance trade-offs in power conversion, force actuation, and self-sensing. Leveraging the optimization results, a prototype sensorless bearingless motor is fabricated and tested. Its eccentric-rotor inductance is measured statically versus frequency and rotor angle, showing less than 10% mutual inductance ripple. Real-time online self-sensing results are provided which demonstrate 15 µm resolution displacement estimates at 800 Hz bandwidth during transient motion.
- 19 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (6) , 9281-9294
Back-EMF Based Self-Sensing Drive for Ultra-High-Speed Surface Mount PMSM
This paper presents an improved rotor position estimation algorithm for ultra-high-speed surface mount permanent magnet synchronous machines (SPMSM). The proposed approach combines a synchronous frame back-EMF state filter and a motion observer structure to accurately estimate rotor position at speeds above 60 kRPM, where conventional position sensing techniques struggle. The state filter and motion observer are designed directly in the discrete domain considering necessary latch dynamics and computational delays. Simulation results for a 2-pole SPMSM show stable performance and close to zero phase lag position estimation at a fundamental frequency of 2.6 kHz. The implementation ensures stable control performance at sampling to fundamental frequency ratios as low as 4. A detailed experimental validation of the proposed algorithm on a high speed bearingless machine has been presented. Closed loop operation at 60 kRPM with a sampling frequency of 4 kHz, along with stable levitation of the bearingless machine was achieved. The proposed methodology is a significant advancement toward precise and reliable rotary motion state estimation for ultra-high-speed SPMSMs.
- 19 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (6) , 9281-9294
Back-EMF Based Self-Sensing Drive for Ultra-High-Speed Surface Mount PMSM
This paper presents an improved rotor position estimation algorithm for ultra-high-speed surface mount permanent magnet synchronous machines (SPMSM). The proposed approach combines a synchronous frame back-EMF state filter and a motion observer structure to accurately estimate rotor position at speeds above 60 kRPM, where conventional position sensing techniques struggle. The state filter and motion observer are designed directly in the discrete domain considering necessary latch dynamics and computational delays. Simulation results for a 2-pole SPMSM show stable performance and close to zero phase lag position estimation at a fundamental frequency of 2.6 kHz. The implementation ensures stable control performance at sampling to fundamental frequency ratios as low as 4. A detailed experimental validation of the proposed algorithm on a high speed bearingless machine has been presented. Closed loop operation at 60 kRPM with a sampling frequency of 4 kHz, along with stable levitation of the bearingless machine was achieved. The proposed methodology is a significant advancement toward precise and reliable rotary motion state estimation for ultra-high-speed SPMSMs.
- Open Access
- 1 October 2024
- Published by Elsevier in Solar Compass
- Vol. 12
Opportunities to Enhance sCO2 Power Cycle Turbomachinery with Bearingless Motor/Generators
- 1 October 2024
- Published by Elsevier in Solar Compass
- Vol. 12
Open AccessOpportunities to Enhance sCO2 Power Cycle Turbomachinery with Bearingless Motor/Generators
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (1) , 323-336
Rotor Eccentricity Impact on Electromagnetic Behavior in Combined Winding Bearingless Motors Towards Displacement Self-Sensing
Levitation control of bearingless motors requires rotor displacement sensors. Recent research has explored self-sensing (sensorless) control which enables removing these sensors, but only for separated windings. Combined windings—where each coil can create torque and force—have been proven to be a critical component for realizing high performance bearingless motors for industrial applications. These applications are often cost-sensitive and require bearingless solutions with minimal overhead compared to traditional motors. Self-sensing control with combined windings removes barriers for wider adoption of bearingless technology—this paper forms the analytic basis for showing this is possible. The primary contribution is a unified modeling framework which encompasses several popular combined winding types found in the literature. For each winding type, winding functions are defined—each type with differing winding coil circuit arrangements and drive interfaces. The terminal inductance matrix and back-EMF is computed to include the effects of a non-centered rotor, and then transformed into decoupled torque and suspension force components. Through the presented transformations, all combined winding types support radial self-sensing, albeit with additional control complexity. Finite element simulations and hardware experiments validate the modeling approach. Future self-sensing research can build upon these models to design control algorithms and machines which work for any combined winding type.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (1) , 323-336
Rotor Eccentricity Impact on Electromagnetic Behavior in Combined Winding Bearingless Motors Towards Displacement Self-Sensing
Levitation control of bearingless motors requires rotor displacement sensors. Recent research has explored self-sensing (sensorless) control which enables removing these sensors, but only for separated windings. Combined windings—where each coil can create torque and force—have been proven to be a critical component for realizing high performance bearingless motors for industrial applications. These applications are often cost-sensitive and require bearingless solutions with minimal overhead compared to traditional motors. Self-sensing control with combined windings removes barriers for wider adoption of bearingless technology—this paper forms the analytic basis for showing this is possible. The primary contribution is a unified modeling framework which encompasses several popular combined winding types found in the literature. For each winding type, winding functions are defined—each type with differing winding coil circuit arrangements and drive interfaces. The terminal inductance matrix and back-EMF is computed to include the effects of a non-centered rotor, and then transformed into decoupled torque and suspension force components. Through the presented transformations, all combined winding types support radial self-sensing, albeit with additional control complexity. Finite element simulations and hardware experiments validate the modeling approach. Future self-sensing research can build upon these models to design control algorithms and machines which work for any combined winding type.
- 1 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (2) , 1812-1823
State Observers and Run-Out Reduction for Magnetically Levitated Motor Systems
Magnetically levitated motor systems create opportunities for new applications of electromechanical power conversion where high-speed and contact-free operation are required. These systems require position sensors and control algorithms for stable levitation which often require filters to reduce feedback noise. Noisy position feedback creates challenges for high-bandwidth estimation of velocity and disturbance force; however, these unmeasured states can be helpful for high-performance control algorithms. This common problem in drives for electric motors has been solved using the Luenberger-style motion state observer. This paper investigates the applicability of the observer to digitally-controlled magnetically levitated systems. First, the observer's embedded plant model is derived for discrete-time implementation. Then, it is shown that the most advantageous use-case of the observer is different for magnetically levitated systems versus rotary motor systems. Unlike motor systems, the zero-lag filtering property of observers is minimally useful, while the ability to estimate and reject disturbances yields significant performance improvements for applications that care about run-out. Comprehensive experimental results are provided on a prototype bearingless motor which validate the observer's performance versus frequency and its ability to estimate disturbance forces for use in reducing the rotor run-out. Experimental results achieve over 10x run-out reduction at low-medium speeds while also reducing control current by 50%.
- 1 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (2) , 1812-1823
State Observers and Run-Out Reduction for Magnetically Levitated Motor Systems
Magnetically levitated motor systems create opportunities for new applications of electromechanical power conversion where high-speed and contact-free operation are required. These systems require position sensors and control algorithms for stable levitation which often require filters to reduce feedback noise. Noisy position feedback creates challenges for high-bandwidth estimation of velocity and disturbance force; however, these unmeasured states can be helpful for high-performance control algorithms. This common problem in drives for electric motors has been solved using the Luenberger-style motion state observer. This paper investigates the applicability of the observer to digitally-controlled magnetically levitated systems. First, the observer's embedded plant model is derived for discrete-time implementation. Then, it is shown that the most advantageous use-case of the observer is different for magnetically levitated systems versus rotary motor systems. Unlike motor systems, the zero-lag filtering property of observers is minimally useful, while the ability to estimate and reject disturbances yields significant performance improvements for applications that care about run-out. Comprehensive experimental results are provided on a prototype bearingless motor which validate the observer's performance versus frequency and its ability to estimate disturbance forces for use in reducing the rotor run-out. Experimental results achieve over 10x run-out reduction at low-medium speeds while also reducing control current by 50%.
- 16 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (6) , 7000-7011
Machine Design and Precision Current Regulation for the Parallel DPNV Bearingless Motor Winding
The parallel dual-purpose no-voltage (DPNV) winding topology offers appreciable advantages for high speed and significant power bearingless motor designs. Precision current regulation is required to realize the high-performance potential of bearingless motors using parallel DPNV windings. The performance of the machine hinges on the ability to decouple the voltage disturbance between the torque and suspension systems at all operating conditions, including high electrical frequencies. Two pathways are investigated to achieve precision actuation: 1) machine design and/or feedforward control to systematically reduce the voltage disturbance, and 2) direct digital design of the current regulator for high-speed operation. Analytical models are constructed, which gives insight into the root cause of the cross-coupling as a function of the physical winding design. It is shown that all practical machine designs produce some level of voltage disturbance which can be directly eliminated via a feedforward voltage added to the torque winding current regulator. The state-of-the-art current regulation methods for the parallel DPNV winding are progressed to enable extended operating ranges for the targeted high speed and bandwidth conditions. By codesigning the machine and controls, more optimized designs are possible by trading off torque ripple and force density.
- 16 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (6) , 7000-7011
Machine Design and Precision Current Regulation for the Parallel DPNV Bearingless Motor Winding
The parallel dual-purpose no-voltage (DPNV) winding topology offers appreciable advantages for high speed and significant power bearingless motor designs. Precision current regulation is required to realize the high-performance potential of bearingless motors using parallel DPNV windings. The performance of the machine hinges on the ability to decouple the voltage disturbance between the torque and suspension systems at all operating conditions, including high electrical frequencies. Two pathways are investigated to achieve precision actuation: 1) machine design and/or feedforward control to systematically reduce the voltage disturbance, and 2) direct digital design of the current regulator for high-speed operation. Analytical models are constructed, which gives insight into the root cause of the cross-coupling as a function of the physical winding design. It is shown that all practical machine designs produce some level of voltage disturbance which can be directly eliminated via a feedforward voltage added to the torque winding current regulator. The state-of-the-art current regulation methods for the parallel DPNV winding are progressed to enable extended operating ranges for the targeted high speed and bandwidth conditions. By codesigning the machine and controls, more optimized designs are possible by trading off torque ripple and force density.