PLPengxiang Li

Pengxiang Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pengxiang Li has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Review of Mo-Si Intermetallic Compounds as Ultrahigh-Temperature Materials

    by Liang Jiang, Bin Zheng, Changsong Wu, Pengxiang Li, Tong Xue, Jiandong Wu, Fenglan Han, Yuhong Chen

    Mo-Si compound-based ultrahigh temperature structural material (UHTM) is a new high-temperature structural material with great potential due to its high melting point, high hardness, and suitable density. As an important material to meet the demands of advanced high-temperature structural applications in the range 1200–1600 °C, in oxidizing and aggressive environments, it has attracted the attention of researchers in aerospace, energy, chemical industry, machinery, mechanical metallurgy, and other fields. This study could provide a reference for the research and application of Mo-Si intermetallic compounds as UHTMs. Based on their crystal structure and properties, we summarized the preparation, limitations, and modification methods of Mo-Si intermetallic compounds and reviewed the research progress in their toughness reinforcement and medium-temperature resistance improvement. Based on the literature review, there has been a certain level of progress in the research on modification of Mo-Si intermetallic compounds worldwide. However, both the high brittleness at room temperature and insufficient strength at high temperature have not been solved yet.


  • Open Access

    Preparation and Characterization of the Functional Properties of Synthetic Aggregates from Silico-Manganese Slag

    by Zhibing Xing, Fenglan Han, Jiuliang Tian, Zhichao Xu, Jiaqi Wang, Tengteng Liu, Bin Zheng, Jiahe Huang

    A large number of natural aggregates are used in the field of construction materials, resulting in the exhaustion of natural aggregates. Therefore, looking for an alternative will slow down the consumption of natural aggregates. The sintering method not only consumes a lot of energy to prepare aggregates but also produces a lot of pollutants. In this study, silico-manganese (SM) slag was dried, ground into powder, and used as raw material. Solid and liquid alkaline activator methods were used to prepare SM slag non-burning aggregate (SMNA) by the cold bonding method. The effects of grinding time, amounts of solid and liquid alkaline activators, curing temperature, and the amount of added fly ash on aggregate properties were investigated. The aggregate microstructure was characterized by XRD, SEM, and FTIR methods, and the toxic leaching analysis of aggregate was performed. The results showed that with a fixed amount of liquid activator (16.2% wt.) and solid activator (15% wt.) and fly ash (20% wt.), respectively, and curing was performed at room temperature, the aggregate properties were optimal: the bulk density of 1236.6–1476.9 kg/m3 and the water absorption lower than 4.9–5.5%. The apparent density was 1973.1–2281.6 kg/m3, and the bulk crushing strength was 24.7–27.9 MPa. The XRD, SEM, and FTIR results indicated that amorphous gel could be formed from SM under an alkaline activator, improving the aggregate strength. The results of toxic leaching showed that the aggregate prepared from SM exhibited environmentally friendly characteristics. The SMNA was obtained via the simple and low-energy consumption production process, paving the new way toward large-scale utilization of SM.