Liansheng Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Liansheng Ma has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Zhuang-Zhuang Wang
School of Civil Engineering, Southeast University, Nanjing, China
4 shared publications- Wenbin Li
School of Architecture Engineering, Weifang University of Science and Technology, Weifang, China
3 shared publications Xiang-Yu Gao
School of Architecture Engineering, Weifang University of Science and Technology, Weifang, China
3 shared publications- Zhuangzhuang Wang
School of Civil Engineering, Southeast University, Nanjing 210096, P. R. China
3 shared publications Teng Wang
School of Architecture Engineering, Weifang University of Science and Technology, Weifang, China
2 shared publicationsYan-Mei Ding
School of Architecture Engineering, Weifang University of Science and Technology, Weifang, China
2 shared publications
Latest Publications
- 14 August 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (32) , 325213
Effects of the initial stresses on the reflection of elastic waves in a piezoelectric semiconductor half-space under multiple physical fields
The reflection of elastic waves in a piezoelectric semiconductor half-space under multiple physical fields has been investigated in the article. Four reflected waves, such as the quasi-pressure (QP) wave, quasi-shear vertical (QSV) wave, electron or hole carriers (CP) wave, and electric–acoustic (EA) wave, are generated when a QP wave is incident on the boundary of a piezoelectric semiconductor half-space. The energy reflection coefficients of the QP, QSV, CP, and EA waves are derived based on the governing equations and surface boundary conditions, and the energy-flux balance is used to verify the numerical results. Effects of the three different initial stresses, steady-state carrier density, and biasing electric field on attenuation characteristics, reflection angles, and energy reflection coefficients of the QP, QSV, CP, and EA waves are discussed in detail. Numerical results show that the initial stresses have limited but observable effects on the attenuation and reflection behavior of reflected waves. The energy distribution among reflected waves and interaction energy between different modes are also affected by initial stresses, while the overall energy-flux balance remains satisfied. The steady-state carrier density and biasing electric field change the energy carried by the CP and EA waves. The findings presented in this article are useful for the optimized design of piezoelectric semiconductor transducers and converters.
- 14 August 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (32) , 325213
Effects of the initial stresses on the reflection of elastic waves in a piezoelectric semiconductor half-space under multiple physical fields
The reflection of elastic waves in a piezoelectric semiconductor half-space under multiple physical fields has been investigated in the article. Four reflected waves, such as the quasi-pressure (QP) wave, quasi-shear vertical (QSV) wave, electron or hole carriers (CP) wave, and electric–acoustic (EA) wave, are generated when a QP wave is incident on the boundary of a piezoelectric semiconductor half-space. The energy reflection coefficients of the QP, QSV, CP, and EA waves are derived based on the governing equations and surface boundary conditions, and the energy-flux balance is used to verify the numerical results. Effects of the three different initial stresses, steady-state carrier density, and biasing electric field on attenuation characteristics, reflection angles, and energy reflection coefficients of the QP, QSV, CP, and EA waves are discussed in detail. Numerical results show that the initial stresses have limited but observable effects on the attenuation and reflection behavior of reflected waves. The energy distribution among reflected waves and interaction energy between different modes are also affected by initial stresses, while the overall energy-flux balance remains satisfied. The steady-state carrier density and biasing electric field change the energy carried by the CP and EA waves. The findings presented in this article are useful for the optimized design of piezoelectric semiconductor transducers and converters.
- 26 September 2025
- Published by Springer Nature in Continuum Mechanics and Thermodynamics
- Vol. 37 (6) , 1-23
Free vibration analysis of functionally graded graphene origami-enabled auxetic metamaterial cylindrical shells under different temperature profiles
- 26 September 2025
- Published by Springer Nature in Continuum Mechanics and Thermodynamics
- Vol. 37 (6) , 1-23
Free vibration analysis of functionally graded graphene origami-enabled auxetic metamaterial cylindrical shells under different temperature profiles
- 4 August 2025
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 48 (11) , 1442-1472
Vibration characteristics of functionally graded graphene origami-enabled auxetic metamaterials plates supported by local elastic foundations in thermal environments
- 4 August 2025
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 48 (11) , 1442-1472
Vibration characteristics of functionally graded graphene origami-enabled auxetic metamaterials plates supported by local elastic foundations in thermal environments
- 1 August 2025
- Published by Pleiades Publishing Ltd in Mechanics of Solids
- Vol. 60 (4) , 3221-3243
Size-Dependent Buckling and Free Vibration of Functionally Graded Graphene Origami-Enabled Auxetic Metamaterial Microbeams in a Thermal Environment Based on Modified Strain Gradient Theory
With the structure size entering the micron/nanometer scale, the mechanical properties of materials show a significant size-dependent effect. Functionally graded graphene origami expanded metamaterials (FG-GOEAM) have become a focal point of interest because of their outstanding mechanical performance. Although the mechanical behavior of FG-GOEAM in beams, plates, and shell structures has been extensively studied, the research for FG-GOEAM microbeams within the framework of the modified strain gradient theory is still insufficient, especially in terms of the thermal environmental effects. To fill this research gap, this paper combines the modified strain gradient theory with the refined beam theory for the first time to investigate the buckling and free vibration characteristics of FG-GOEAM microbeams. Describing thermal loads in terms of thermal strain energy, and the material parameters are simulated using a micromechanical model assisted by genetic programming (GP). The governing equations are based on the Lagrange equations and solved by the Chebyshev–Ritz method. The effects of size effect parameters, temperature, graphene distribution mode, folding mode, weight fraction, folding degree, length-to-fineness ratio, and boundary conditions on the mechanical properties of the microbeams are comprehensively investigated. The results show that the reasonable design of the FG-GOEAM distribution pattern and optimization of reinforcement material content can significantly enhance the microbeam performance. The proposed method also provides an effective solution for analyzing the buckling and vibration behaviors of microbeams with advanced materials.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Mechanics of Solids
- Vol. 60 (4) , 3221-3243
Size-Dependent Buckling and Free Vibration of Functionally Graded Graphene Origami-Enabled Auxetic Metamaterial Microbeams in a Thermal Environment Based on Modified Strain Gradient Theory
With the structure size entering the micron/nanometer scale, the mechanical properties of materials show a significant size-dependent effect. Functionally graded graphene origami expanded metamaterials (FG-GOEAM) have become a focal point of interest because of their outstanding mechanical performance. Although the mechanical behavior of FG-GOEAM in beams, plates, and shell structures has been extensively studied, the research for FG-GOEAM microbeams within the framework of the modified strain gradient theory is still insufficient, especially in terms of the thermal environmental effects. To fill this research gap, this paper combines the modified strain gradient theory with the refined beam theory for the first time to investigate the buckling and free vibration characteristics of FG-GOEAM microbeams. Describing thermal loads in terms of thermal strain energy, and the material parameters are simulated using a micromechanical model assisted by genetic programming (GP). The governing equations are based on the Lagrange equations and solved by the Chebyshev–Ritz method. The effects of size effect parameters, temperature, graphene distribution mode, folding mode, weight fraction, folding degree, length-to-fineness ratio, and boundary conditions on the mechanical properties of the microbeams are comprehensively investigated. The results show that the reasonable design of the FG-GOEAM distribution pattern and optimization of reinforcement material content can significantly enhance the microbeam performance. The proposed method also provides an effective solution for analyzing the buckling and vibration behaviors of microbeams with advanced materials.
- 18 July 2025
- Published by Wiley in ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
- Vol. 105 (7)
Bending and buckling analysis of functionally graded graphene origami‐enabled auxetic metamaterials plates with arbitrary distribution of Kerr elastic foundation based on the three‐variable simplified plate theory
Functionally graded (FG) graphene origami (GOri)‐enabled auxetic metamaterials (FG‐GOEAM) have attracted much attention due to their excellent negative Poisson's ratio (NPR) properties. At present, there is still a lack of research on the deflection deformation and instability of FG‐GOEAM plates. To fill this gap, the bending and buckling behaviors of FG‐GOEAM plates are systematically investigated for the first time in this study by using the three‐variable simplified plate theory (TVSPT), which successfully establishes the coupling relationship between the characteristic parameters of FG metamaterials and the displacement distribution of the plate structure in the thickness direction by introducing the parametric factors related to the elastic modulus of the material and the Poisson's ratio. The study examines FG‐GOEAM plates supported by an arbitrarily distributed Kerr elastic foundation and determines their locations and areas through accurate mathematical integration based on the TVSPT framework. The governing equations were derived by three‐dimensional elasticity theory and the static equilibrium principle, and the central deflection and critical buckling load of the plates under different boundary conditions were solved by the Galerkin's method. The results show that the FG metamaterial exhibits a pronounced NPR behavior with the increase of the GOri mass fraction. When GOri is enriched near the surface and its folding degree is reduced, the stiffness of the plate can be significantly enhanced. The numerical results of this work are expected to provide a theoretical foundation for the structural optimization and innovative design of FG‐GOEAM plates.
- 18 July 2025
- Published by Wiley in ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
- Vol. 105 (7)
Bending and buckling analysis of functionally graded graphene origami‐enabled auxetic metamaterials plates with arbitrary distribution of Kerr elastic foundation based on the three‐variable simplified plate theory
Functionally graded (FG) graphene origami (GOri)‐enabled auxetic metamaterials (FG‐GOEAM) have attracted much attention due to their excellent negative Poisson's ratio (NPR) properties. At present, there is still a lack of research on the deflection deformation and instability of FG‐GOEAM plates. To fill this gap, the bending and buckling behaviors of FG‐GOEAM plates are systematically investigated for the first time in this study by using the three‐variable simplified plate theory (TVSPT), which successfully establishes the coupling relationship between the characteristic parameters of FG metamaterials and the displacement distribution of the plate structure in the thickness direction by introducing the parametric factors related to the elastic modulus of the material and the Poisson's ratio. The study examines FG‐GOEAM plates supported by an arbitrarily distributed Kerr elastic foundation and determines their locations and areas through accurate mathematical integration based on the TVSPT framework. The governing equations were derived by three‐dimensional elasticity theory and the static equilibrium principle, and the central deflection and critical buckling load of the plates under different boundary conditions were solved by the Galerkin's method. The results show that the FG metamaterial exhibits a pronounced NPR behavior with the increase of the GOri mass fraction. When GOri is enriched near the surface and its folding degree is reduced, the stiffness of the plate can be significantly enhanced. The numerical results of this work are expected to provide a theoretical foundation for the structural optimization and innovative design of FG‐GOEAM plates.
- 13 January 2025
- Published by Springer Nature in Acta Mechanica
- p. 1-23
Free vibration and buckling analysis of FG graphene origami-enabled auxetic metamaterial beams in a thermal environment
- 13 January 2025
- Published by Springer Nature in Acta Mechanica
- p. 1-23
Free vibration and buckling analysis of FG graphene origami-enabled auxetic metamaterial beams in a thermal environment
- 15 May 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 25 (09)
Effect of Thickness Stretching on Bending, Buckling, and Free Vibration of Functionally Graded Porous Beams
In this paper, the bending, buckling, and free vibration of functionally graded porous (FGP) beams are studied based on two beam theories (with or without considering thickness stretching, respectively). The effect of thickness stretching is obtained by comparing the results of the two theories. Two symmetrical distributions and one asymmetrical distribution of pores are considered. Both Young’s modulus and mass density of the FGP beams are in gradient variation in the thickness direction. The governing equations are constructed using Hamilton’s principle. The analytical solutions are obtained by Navier’s method. The effects of slenderness ratios, pore distribution, porosity and thickness stretching on FGP beams have been investigated. The results show that the inhomogeneity of FGP beams in the thickness direction is positively correlated with the effect of thickness stretching.
- 15 May 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 25 (09)
Effect of Thickness Stretching on Bending, Buckling, and Free Vibration of Functionally Graded Porous Beams
In this paper, the bending, buckling, and free vibration of functionally graded porous (FGP) beams are studied based on two beam theories (with or without considering thickness stretching, respectively). The effect of thickness stretching is obtained by comparing the results of the two theories. Two symmetrical distributions and one asymmetrical distribution of pores are considered. Both Young’s modulus and mass density of the FGP beams are in gradient variation in the thickness direction. The governing equations are constructed using Hamilton’s principle. The analytical solutions are obtained by Navier’s method. The effects of slenderness ratios, pore distribution, porosity and thickness stretching on FGP beams have been investigated. The results show that the inhomogeneity of FGP beams in the thickness direction is positively correlated with the effect of thickness stretching.
- 15 March 2024
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 12 (7) , 7729-7749
Thermal Vibration Analysis of Functionally Graded Porous Plates Reinforced by Graphene Platelets Supported by Arbitrarily Distributed Kerr Foundations Under a Nonlinear Temperature Profile
- 15 March 2024
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 12 (7) , 7729-7749
Thermal Vibration Analysis of Functionally Graded Porous Plates Reinforced by Graphene Platelets Supported by Arbitrarily Distributed Kerr Foundations Under a Nonlinear Temperature Profile
- 10 March 2023
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 93 (6) , 2549-2564
Free vibration analysis of functionally graded porous plates based on a new generalized single-variable shear deformation plate theory
- 10 March 2023
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 93 (6) , 2549-2564
Free vibration analysis of functionally graded porous plates based on a new generalized single-variable shear deformation plate theory