CGCallie Goetz

Callie Goetz

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Callie Goetz has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Nuclear Material Accounting and Control for Irradiated Pebbles in PBRs: Challenges and Approaches for International Safeguards

    by Oak Ridge Oak Ridge National Laboratory (Ornl), Jianwei Hu, Usdoe, Donny Hartanto, Jin Whan Bae, Yves Robert, Mara Handley, Greg Nutter, Callie Goetz, Ramkumar Venkataraman, et al.

    Pebble-bed reactors (PBRs) circulate large numbers of graphite fuel pebbles through the core and fuel-handling system, which creates unique challenges for nuclear material accounting and control (NMAC) and for the implementation of international safeguards. Unlike light-water reactors, PBRs use hundreds of thousands of fuel elements that generally do not have unique identifiers and that can experience different irradiation histories over multiple passes through the core. As a result, conventional item-counting approaches are not sufficient for irradiated-pebble accountancy, and measurement and analysis methods are needed to estimate burnup and nuclear material quantities for individual pebbles and for groups of pebbles loaded into storage canisters. This report develops a model-informed approach for NMAC of irradiated pebbles by combining reactor-physics calculations, gamma and neutron measurement studies, radiation-transport simulations, and data analytics. Pebble-resolved databases were generated for the PBMR-400 and Xe-100 reference designs using the ORIGAMI flowing-fuel depletion capability in SCALE and a hyper-fidelity (HxF) Serpent 2 depletion approach. For the Xe-100 model after six passes, the two methods agreed within approximately 0.2% for average total uranium mass and 1.3% for average total plutonium mass, although larger differences were observed for some individual isotopes. The depletion results also showed that 137Cs mass increases nearly linearly with burnup, the 134Cs/137Cs ratio provides additional sensitivity to irradiation history, total photon emission generally decreases after early fission-product buildup, and neutron emission increases strongly with burnup as transuranic nuclides accumulate. To assess safeguards-relevant measurement approaches, neutron detector concepts for irradiated pebbles were studied and gamma-ray measurements were performed on a variety of irradiated TRISO fuel samples available at Oak Ridge National Laboratory. The measurement results showed that the principal cesium gamma-ray peaks near 605, 662, and 796 keV can be measured with both HPGe and M400 CZT detectors and can provide information related to burnup. The neutron detector studies indicated that active differential die-away (DDA) measurements can provide direct sensitivity to fissile content in an irradiated pebble, while passive neutron measurements can provide complementary information on irradiation state and initial enrichment. Simulated gamma spectra for short-cooled pebbles further suggested that the key cesium peaks remain observable even in more complex spectra, although gamma spectra measurement data for irradiated TRISO samples or pebbles with cooling time shorter than ~9 months are not publicly available. Synthetic gamma spectra generated from the depletion databases were used to train machine learning regression models for pebble characterization. On the current synthetic test data, a whole-spectrum convolutional neural network produced mean absolute relative errors of 1.38% for burnup, 0.08% for total uranium mass, 1.17% for total plutonium mass, and 1.53% for total fissile mass, which were lower than those obtained using a conventional cesium peak-ratio regression model. A Pebble Data Tool was also developed to link measurements and predictions with pebble records, support canister-level inventory aggregation, and flag signatures that are inconsistent with a pebble’s declared attributes including the initial enrichments. Overall, the results demonstrate the feasibility of integrating reactor-physics calculations, nondestructive assay signatures, and data-analytic methods to support NMAC of irradiated PBR fuel. The present results are based primarily on synthetic signatures and on measurements of irradiated TRISO samples rather than irradiated pebbles. Application to operating facilities will therefore require validation with representative irradiated-pebble measurements and explicit treatment of measurement and model uncertainties.

  • Particulate Effluent Characterization (Final Report)

    by Amanda Sandifer, Erik Kabela, William Mccarter, Michael J Willis, Brandon W Bonds, Callie Goetz, Isaac Arseneau

  • Open Access

    Impact of Time-Dependent Reactor and Sensor Physics on Core Power Synthesis (Rev.1)

    by Usdoe, Anthony (Tony) Birri, K. Goetz, Jianwei Hu, Tony Birri, Callie Goetz

  • Open Access

    Developments to the Distributed Holdup Monitoring System in Fiscal Year 2025

    by Usdoe, K. Goetz, Brett Witherspoon, Nicholas Prins, Thomas Ruland, Chuck Britton Jr., Landon B Crawford, Jesse Davis, Callie Goetz

  • Open Access

    Impact of Time Dependent Reactor and Sensor Physics on Core Power Synthesis

    by Usdoe, Anthony (Tony) Birri, K. Goetz, Jianwei Hu, N Dianne Ezell, Tony Birri, Callie Goetz

  • Open Access

    Gamma and Neutron Measurement and Modeling of Irradiated TRISO Fuel

    by Jianwei Hu, Donny Hartanto, Greg Nutter, Ramkumar Venkataraman, Robert McElroy, Callie Goetz

    Given the unique characteristics of the PBR fuel cycle, both gamma and neutron measurements are expected to play important roles in performing and maintaining nuclear material control and accounting for spent pebbles to safeguard the fuel cycle. Given the lack of irradiated pebbles in the US, a variety of irradiated TRISO fuel samples with wide ranges of burnups and cooling times available at ORNL were used in this work. A large number of gamma and neutron measurements have been performed on these samples to collect data to test the various detectors and to benchmark the computer models to simulate the depletion and decay of the fuel and the measurements themselves. Two neutron detectors, including a custom-made detector and the Very High-Performance Neutron Multiplicity Counting, were used to measure the neutrons emitted by these TRISO samples. Three gamma spectrometry detectors, including an HPGe and the M400 CZT detector, were used to measure gamma-ray emissions from these samples. The M400 was recently adopted by the IAEA for fresh uranium measurements, but it was tested for spent fuel measurements prior to this project. Detailed MCNP models were developed to simulate these neutron and gamma measurements. Some GADRAS models were also developed to cross check the MCNP models for the gamma measurements. It was found challenging to perform neutron measurements in the hot cell due to the high background counts. Close agreements were observed between the simulated and measured neutron count rates in both detectors’ measurements of californium calibration sources. Both the HPGe and M400 detectors were able to measure the 604 and 662 keV peaks from these samples, which are the two most important peaks used to infer fuel burnup. Although the M400 detector did not have nearly good energy resolution and did not detect some of the minor peaks as the HPGe detector, it was found to be capable of handling significantly higher dose rates than HPGe. Given the complexities in the TRISO samples (e.g., different samples sizes) and uncertainties in the alignments between the detector and the TRISO fuel inside the containers, large scatters were found between the peak area rates and the samples’ burnups. However, the 604/662 peak ratios were found to trend well with the samples’ burnups among most samples in both measured and simulated results.


  • Fast Neutron Irradiation of a Multichannel JFET-Based Optical Encoder

    by Daniel C. Sweeney, F. Kyle Reed, K. C. Goetz, Adam P. Buchalter, N. Dianne Bull Ezell

    Modern electrical components are susceptible to damage from the high levels of radiation and extreme temperatures found near reactors in terrestrial nuclear power plants and in aerospace applications. Radiation-hardened electronics are being developed, largely for the aerospace industry, but they sometimes rely on application-specific, small-batch semiconductor fabrication processes. These processes tend to be prohibitively expensive to develop and maintain outside major industrial facilities or governmental agencies. Recently, commercially available, non-radiation-rated junction-gate field-effect transistors (JFETs) were shown to maintain their functionality at gamma doses exceeding 1 MGy, suggesting that nonrated, commercially available electrical components could be used to develop systems that are tolerant to ionizing radiation. However, gamma ray survival is not indicative of neutron dose survival, and few studies characterize JFETs under neutron irradiation. To address this knowledge gap, a JFET-based analog multiplexer and optical pulse-width modulation encoder was developed and irradiated using a 252 Cf source to 1.6 × 10 13 n/cm 2 . The multiplexed optical encoder (MOE) system maintained functionality throughout testing and showed little evidence of radiation effects. These results indicate that circuitry tolerant to fast neutron damage can be developed using low-cost, non-radiation-rated, commercially available JFETs, which could provide a lower production cost alternative to specialized semiconductor processes when designing and building electronics better able to survive neutron irradiation.


  • Open Access

    Development of a Fast-Spectrum Self-Powered Neutron Detector for Molten Salt Experiments in the Versatile Test Reactor

    by K. C. Goetz, S. M. Cetiner, C. Celik

    The self-powered neutron detector (SPND) is a widely used flux monitor in thermal nuclear reactors. Although this is a mature technology, the current state of the art is tuned for a thermal neutron spectrum, so many of the devices currently in use lack sensitivity to fast neutrons. Because current in SPNDs is produced through nuclear reactions with the neutron flux inside a reactor, sensitivity in SPNDs is determined by the neutron cross section of the neutron-sensitive portion of the detector, termed the emitter. This neutron cross section drops by orders of magnitude between thermal and fast neutron energies for many emitters in currently used SPNDs, with a corresponding drop in current from the detector. This paper discusses efforts to develop a fast-spectrum self-powered neutron detector (FS-SPND) that is sensitive to neutrons with energies ranging from 0.025 eV up to 1 MeV. An in-depth analysis of Evaluated Nuclear Data File (ENDF)/B-VII.1 neutron-capture cross sections was performed, and four new materials were identified that are suitable emitter candidates for use in measuring fast neutrons. All four materials are stable mid-shell nuclei in the region between doubly magic 132Sn and 208Pb. Each candidate was simulated with the Geant4 Monte Carlo simulation toolkit to optimize overall detector efficiency.