Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Qingzhang Zhang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of repeated tensile load damage on chloride-ion transport properties in concrete

    by Qingzhang Zhang, Yan Fang, Feng Wang, Li Song, Heng Jiang

    Concrete structures in marine environments often face durability problems owing to the coupled action of external loads and chloride-ion erosion. Therefore, in this study, we conducted chloride ion tests on damaged concrete at four tensile stress levels and three varying number of load cycles. The test results indicate that an increase in the tensile stress and number of load cycles results in a gradual increase in the concrete damage coefficient. At fewer cycles, 50% tensile stress was the critical threshold point of damage; the damage was evident beyond this range. As the number of cycles increased, the damage increased gradually up to the critical threshold and thereafter increased rapidly. With an increase in the tensile stress level, the diffusion coefficient of chloride ions increased gradually; the loading degree improved the permeability of chloride ions. In addition, based on the theory of linear fatigue cumulative damage to concrete, a mathematical model of the relationship between the load factor and concrete damage coefficient was established. Using this model, a prediction model for the chloride ion diffusion coefficient was proposed considering the tensile stress level, load cycle number, and other load factors.

  • Open Access

    Corrosion-Fatigue Life Prediction of the U-Shaped Beam in Urban Rail Transit under a Chloride Attack Environment

    by Guixiang Chen, Mingjie Wang, Chenxing Cui, Qingzhang Zhang

    The coupled effect of the chloride attack environment and train load seriously affects the safety and durability of urban rail transit viaducts and dramatically reduces their service life. In this research, a corrosion-fatigue life prediction model of the prestressed concrete (PC) beam under the coupled effect of the chloride attack environment and train load was developed. This proposed model was illustrated by a 30 m-span PC U-shaped beam in an urban rail transit viaduct. The competitive relationship between concrete fatigue cracking time, non-prestressed reinforcement corrosion initiation time, and concrete corrosion-induced cracking time was discussed. The effects of train frequency, the chloride attack environment grade, and the environmental temperature and relative humidity were investigated on corrosion-fatigue life. Results indicate that train frequency, the chloride attack environment grade, and the environmental temperature can reduce the corrosion-fatigue life of a U-shaped beam by up to 30.0%, 50.7%, and 21.5%, respectively. A coupled chloride attack environment and train frequency can reduce the corrosion-fatigue life by up to 61.2%. Distinct from the environmental temperature, the change of relative humidity has little effect on the corrosion-fatigue life of the U-shaped beam.


  • Open Access

    Investigation on Numerical Simulation of Chloride Transport in Unsaturated Concrete

    by Qingzhang Zhang, Feng Wang, Yifeng Ling, Hui Chen, Zhongyuan Li

    Marine atmosphere environment accelerates the process of chloride penetration into concrete under the coupling effect of ambient temperature and relative humidity, thereby reducing the durability and service life of concrete. This paper aims to investigate the change of water equilibrium saturation and the chloride transport properties of concrete materials in different environments. The water equilibrium saturation tests at three temperatures and five relative humidity (RH) and salt spray erosion tests at three temperatures were performed. The influence of RH and temperature on the equilibrium saturation of concrete and the influence of temperature and time on the chloride diffusion coefficient are investigated. The results show that, in the process of moisture absorption and desorption, the equilibrium saturation of concrete gradually decreases as temperature rises. At the same depth of concrete, the chloride content gradually increases with temperature increasing, as well as the chloride diffusion coefficient. However, as the corrosion time of salt spray increases, the altering of chloride diffusion coefficient becomes less. Based on the Kelvin equation, a relationship between capillary pressure and water saturation in concrete was established, and a moisture transfer model for concrete in the process of moisture absorption and desorption was derived. Further, based on the established chloride diffusion equation and heat balance equation, a model of temperature‐wet‐chloride coupling chloride transfer was derived. Theory model simulation results show the transfer speed of chloride under the coupling of diffusion and capillary is higher than pure diffusion in moisture in the absorption process. However, the opposite is true in the desorption process. Moreover, with the increment of saturation rate, the capillary effect on chloride transport is enhanced.


  • Open Access

    Influence of Temperature on the Moisture Transport in Concrete

    by Qingzhang Zhang, Zihan Kang, Yifeng Ling, Hui Chen, Kangzong Li

    Moisture with harmful ions penetrates into the interior of concrete, which causes deterioration of the concrete structure. In this study, a moisture saturation equilibrium relationship of concrete was tested under different temperatures and relative humidity conditions to develop moisture absorption and desorption curves. Based on experimental data and numerical simulation, a model of moisture transport in concrete was established. The results from the model indicate that the moisture absorption rate was lower at higher temperatures and largely dependent on the saturation gradient, while the desorption was increased at higher temperatures and mostly affected by the saturation gradient. The proposed model was highly in agreement with the experimental data.


  • Open Access

    Experiment and Analysis of Thermal Conductivity of Marine Concrete with Different Composition

    by Qingzhang Zhang, Shuanzhu Tian, Kangzong Li, Zhongyuan Li

    The thermal conductivity and porosity of marine concrete with different composition were measured by transient plane heat source method. The effects of aggregate volume fraction, sand ratio and water-cement ratio on thermal conductivity of marine concrete were investigated. Through the analysis of these factors and the comparison with other scholars, it is found that the thermal conductivity of marine concrete increases with the increase of aggregate volume fraction, decreases with the increase of sand ratio and water-cement ratio.


  • Buoyancy Reduction Coefficients for Underground Silos in Sand and Clay

    by Qingzhang Zhang, Lijun Ouyang, Zhenqing Wang, Haiyan Liu, Yongbing Zhang


  • Similarities in Accelerated Chloride Ion Transport Tests for Concrete in Tidal Zones

    by Qing-Zhang Zhang, Xiang-Lin Gu, Zhi-Lu Jiang, Wei-Ping Zhang


  • Study on Effect of Soaking Time on the Transmission of Chloride Ion in Concrete under Drying-Wetting Cycles

    by Qing Zhang Zhang, Xiang Lin Gu, Wei Ping Zhang, Qing Hua Huang

    Acceleration penetration tests of chloride ion were conducted for typical diurnal and semidiurnal tidal types in China with consideration of various values of soaking time. It was found that the content of chloride ion from shallow area near the surface of concrete to the pure diffusion area of concrete reduced more significantly with the depth than that in the pure diffusion area of concrete. Based on Fick’s second law, the variation laws of chloride ion content at the edge of the pure diffusion area and chloride ion diffusion coefficient in the pure diffusion area under different soaking time ratios were identified by using the chloride ion content distributions that were established based on the test results of concrete in the pure diffusion area. It was found that the chloride ion content and the apparent chloride ion diffusion coefficient in pure diffusion area may be very high when the ratio of soaking time ratio is between 0.3 and 0.42 or 0.6 and 0.7 for diurnal tidal type and 0.83 for semidiurnal tidal type, which will cause severe erosion in concrete structures in tidal zone.