Yunxin Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yunxin Cheng has a total of 208 co-authors. Here are the top co-authors by number of shared publications:
Ling Zhang
Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 230031, China
16 shared publicationsAilan Hu
Institute of Plasma Physics Chinese Academy of Sciences, Hefei 230031, People’s Republic of China
14 shared publicationsShigeru Morita
Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China
12 shared publications- Hai-Qing Liu
Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences 1 , Hefei 230031
10 shared publications - Wenmin Zhang
Institute of Plasma Physics, Hefei Institutes of Physical Science. Chinese Academy of Sciences, Hefei 230031, China
10 shared publications - Dario Marcelo Mitnik
Instituto de Astronomía y Física del Espacio (CONICET-Universidad de Buenos Aires), Buenos Aires 1428, Argentina
9 shared publications
Latest Publications
- 1 November 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (11) , 115007
Density and RF-drive scalings of an idealized one-dimensional RF sheath model and implications for impurity sputtering
Radio frequency (RF) sheath formation at the plasma edge is a critical factor for impurity generation during ion cyclotron range of frequency (ICRF) heating. Motivated by EAST observations that correlate core impurity contamination with edge plasma density and ICRF power, this paper presents a parametric study of RF sheath characteristics using an idealized one-dimensional model. The model couples a hydrodynamic sheath description with an equivalent circuit framework, with the RF driving current prescribed through an RF-drive parameter P RF via a fixed empirical mapping and without antenna-loading feedback. Within the scanned parameter space (edge plasma density n 0 = 0.5 × 10 18 to 1.0 × 10 18 m − 3 and P RF = 1 – 5 MW), spanning the evanescent regime relevant to typical ICRF conditions, the nonlinear balance between displacement and conduction currents yields well-defined scaling laws. The results indicate that, within the scanned density interval, the time-averaged sheath potential scales inversely with the square of the plasma density ( n 0 − 2 ). With respect to P RF , the sheath potential exhibits a stronger-than-classical scaling ( P RF b fit ) where the exponent b fit decreases monotonically from approximately 1.10 at low densities to 0.76 at high densities, approaching the classical P RF 1 / 2 limit. Total harmonic distortion analysis provides a physical interpretation of these scaling behaviors in terms of the density-dependent suppression and P RF -driven enhancement of the displacement current. The implications of these scalings for impurity sputtering are assessed by estimating the physical sputtering yields of metallic impurities (Fe, Cu) under the computed sheath potentials. The physical sputtering yields are shown to be highly sensitive to both parameters. Such results establish the intrinsic parametric dependence of sheath formation within the idealized model, providing theoretical insights into the nonlinear RF sheath effects that can help interpret impurity behaviors in high-power ICRF-heated plasmas.
- 1 November 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (11) , 115007
Density and RF-drive scalings of an idealized one-dimensional RF sheath model and implications for impurity sputtering
Radio frequency (RF) sheath formation at the plasma edge is a critical factor for impurity generation during ion cyclotron range of frequency (ICRF) heating. Motivated by EAST observations that correlate core impurity contamination with edge plasma density and ICRF power, this paper presents a parametric study of RF sheath characteristics using an idealized one-dimensional model. The model couples a hydrodynamic sheath description with an equivalent circuit framework, with the RF driving current prescribed through an RF-drive parameter P RF via a fixed empirical mapping and without antenna-loading feedback. Within the scanned parameter space (edge plasma density n 0 = 0.5 × 10 18 to 1.0 × 10 18 m − 3 and P RF = 1 – 5 MW), spanning the evanescent regime relevant to typical ICRF conditions, the nonlinear balance between displacement and conduction currents yields well-defined scaling laws. The results indicate that, within the scanned density interval, the time-averaged sheath potential scales inversely with the square of the plasma density ( n 0 − 2 ). With respect to P RF , the sheath potential exhibits a stronger-than-classical scaling ( P RF b fit ) where the exponent b fit decreases monotonically from approximately 1.10 at low densities to 0.76 at high densities, approaching the classical P RF 1 / 2 limit. Total harmonic distortion analysis provides a physical interpretation of these scaling behaviors in terms of the density-dependent suppression and P RF -driven enhancement of the displacement current. The implications of these scalings for impurity sputtering are assessed by estimating the physical sputtering yields of metallic impurities (Fe, Cu) under the computed sheath potentials. The physical sputtering yields are shown to be highly sensitive to both parameters. Such results establish the intrinsic parametric dependence of sheath formation within the idealized model, providing theoretical insights into the nonlinear RF sheath effects that can help interpret impurity behaviors in high-power ICRF-heated plasmas.
- Open Access
- 29 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 67 (1) , 016016
Transition from Te-ITB sustainment with saturated m / n =1/1 activity to q =3/2 rational-surface-mediated collapse in EAST
A collapse of an electron internal transport barrier (Te-ITB) followed by a major disruption, is observed in electron-heating-dominant H-mode plasmas with a core- peaked Te profile on EAST tokamak. Before the collapse, the Te-ITB coexists stably with a long-lived saturated m / n = 1/1 mode, where m and n denote the poloidal and toroidal mode numbers, respectively. During this phase, the dominant electron- temperature information-transfer pathway identified by the transfer entropy (TE) analysis remains in the core region, consistent with barrier sustainment. In the pre-collapse phase, nonlinear coupling among core m/n = 1/1 modes, secondary destabilization of the saturated m / n = 1/1 mode and enhanced core impurity radiation are observed. The dominant TE response then shifts toward the q = 3/2 rational surface, while the inward-directed coupling is weakened. Although an m / n = 2/1 mode already exists before the collapse, it remains relatively passive until the heat perturbation propagates outward. The m / n = 3/2 mode emerges closest in time to the Te-ITB collapse and may participate in the final barrier degradation, which is followed by rapid outward thermal-perturbation propagation, fast-electron redistribution, enhanced impurity radiation, and finally a major disruption. These observations suggest that Te-ITB collapse is associated with the reorganization of electron-temperature information- transfer pathways and local rational-surface coupling, rather than with static magnetic- island topology alone.
- 29 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 67 (1) , 016016
Open AccessTransition from Te-ITB sustainment with saturated m / n =1/1 activity to q =3/2 rational-surface-mediated collapse in EAST
A collapse of an electron internal transport barrier (Te-ITB) followed by a major disruption, is observed in electron-heating-dominant H-mode plasmas with a core- peaked Te profile on EAST tokamak. Before the collapse, the Te-ITB coexists stably with a long-lived saturated m / n = 1/1 mode, where m and n denote the poloidal and toroidal mode numbers, respectively. During this phase, the dominant electron- temperature information-transfer pathway identified by the transfer entropy (TE) analysis remains in the core region, consistent with barrier sustainment. In the pre-collapse phase, nonlinear coupling among core m/n = 1/1 modes, secondary destabilization of the saturated m / n = 1/1 mode and enhanced core impurity radiation are observed. The dominant TE response then shifts toward the q = 3/2 rational surface, while the inward-directed coupling is weakened. Although an m / n = 2/1 mode already exists before the collapse, it remains relatively passive until the heat perturbation propagates outward. The m / n = 3/2 mode emerges closest in time to the Te-ITB collapse and may participate in the final barrier degradation, which is followed by rapid outward thermal-perturbation propagation, fast-electron redistribution, enhanced impurity radiation, and finally a major disruption. These observations suggest that Te-ITB collapse is associated with the reorganization of electron-temperature information- transfer pathways and local rational-surface coupling, rather than with static magnetic- island topology alone.
- 9 April 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (4) , 045039
Spectral observation and radial profile analysis of line emissions from W 46+ ions at 7-8 Å using extreme ultraviolet (EUV) spectrometers in EAST tokamak with full tungsten divertor
Since 2021, the Experimental Advanced Superconducting Tokamak (EAST) has been in continuous operation under a full tungsten divertor environment. Several line emissions from Ni-like W 46+ ions were observed in the wavelength range of 7–8 Å in EAST device using extreme ultraviolet (EUV) spectrometers. The W 46+ spectra became observable after a tungsten burst suddenly occurred in L-mode plasma with electron cyclotron resonance heating (ECRH) and lower-hybrid wave (LHW) heating. The W 46+ line emissions were precisely identified through the spectral analysis using Flexible Atomic Code (FAC) and NIST database. The line identification on the W 46+ spectra includes two E1 transitions at 7.026 Å and 7.173 Å, E2 transition at 7.607 Å and blended line at 7.93 Å. The blended line is composed of E2 and M3 transitions at 7.928 Å and 7.937 Å, respectively. The temporal evolution in intensity of such line emissions was investigated with tungsten concentration (C W =n W /n e ) and electron temperature. Statistical analysis results indicate that observation of the W 46+ spectral lines becomes possible at C W ≧1.0×10⁻⁴ and T e ≧4.0 keV. The radial intensity profile of W 46+ line emissions was also measured using space-resolved EUV spectrometers, and the local emissivity profile was analyzed with Abel inversion method. As a result, the density profile of W 46+ ions was successfully obtained using photon emissivity coefficients (PEC) in the ADAS database.
- 9 April 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (4) , 045039
Spectral observation and radial profile analysis of line emissions from W 46+ ions at 7-8 Å using extreme ultraviolet (EUV) spectrometers in EAST tokamak with full tungsten divertor
Since 2021, the Experimental Advanced Superconducting Tokamak (EAST) has been in continuous operation under a full tungsten divertor environment. Several line emissions from Ni-like W 46+ ions were observed in the wavelength range of 7–8 Å in EAST device using extreme ultraviolet (EUV) spectrometers. The W 46+ spectra became observable after a tungsten burst suddenly occurred in L-mode plasma with electron cyclotron resonance heating (ECRH) and lower-hybrid wave (LHW) heating. The W 46+ line emissions were precisely identified through the spectral analysis using Flexible Atomic Code (FAC) and NIST database. The line identification on the W 46+ spectra includes two E1 transitions at 7.026 Å and 7.173 Å, E2 transition at 7.607 Å and blended line at 7.93 Å. The blended line is composed of E2 and M3 transitions at 7.928 Å and 7.937 Å, respectively. The temporal evolution in intensity of such line emissions was investigated with tungsten concentration (C W =n W /n e ) and electron temperature. Statistical analysis results indicate that observation of the W 46+ spectral lines becomes possible at C W ≧1.0×10⁻⁴ and T e ≧4.0 keV. The radial intensity profile of W 46+ line emissions was also measured using space-resolved EUV spectrometers, and the local emissivity profile was analyzed with Abel inversion method. As a result, the density profile of W 46+ ions was successfully obtained using photon emissivity coefficients (PEC) in the ADAS database.
- Open Access
- 16 March 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (4) , 044002
Simultaneous ELM suppression and divertor detachment via synergistic boron powder and neon injection in EAST
A novel approach for simultaneous power exhaust and edge-localized mode (ELM) control is presented in the Experimental Advanced Superconducting Tokamak discharges, which utilize an ITER-like tungsten divertor. Real-time injection of boron (B) powder and neon (Ne) gas overcomes their limitations encountered when used separately. Pure Ne seeding leads to a narrow operational window constrained by core impurity accumulation and H-mode to L-mode back transitions, while pure solid B injection (SBI) is insufficient for effective divertor cooling. In comparison, their combined use achieves a stable, stationary, ELM-suppressed H-mode with adequate power exhaust. This synergistic scenario features partial energy detachment at the outer divertor while maintaining good plasma confinement ( H 98 ∼ 1) with minimal degradation. Two key features of this scenario are: (1) the SBI triggers a persistent Edge Harmonic Mode (EHM), which provides a crucial continuous particle transport channel, preventing Ne and tungsten/molybdenum accumulation without flushing out by ELM, and (2) the B + Ne mixture allows for active optimization of the radiated power profile. Core radiation can be reduced by substituting a portion of the Ne with B, leveraging their complementary non-coronal equilibrium radiation efficiencies. This combined B + Ne injection scheme presents a promising pathway toward integrated core-edge scenarios, offering the potential to minimize total impurity throughput while leveraging an actuator (powder injection) already being considered for ITER.
- 16 March 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (4) , 044002
Open AccessSimultaneous ELM suppression and divertor detachment via synergistic boron powder and neon injection in EAST
A novel approach for simultaneous power exhaust and edge-localized mode (ELM) control is presented in the Experimental Advanced Superconducting Tokamak discharges, which utilize an ITER-like tungsten divertor. Real-time injection of boron (B) powder and neon (Ne) gas overcomes their limitations encountered when used separately. Pure Ne seeding leads to a narrow operational window constrained by core impurity accumulation and H-mode to L-mode back transitions, while pure solid B injection (SBI) is insufficient for effective divertor cooling. In comparison, their combined use achieves a stable, stationary, ELM-suppressed H-mode with adequate power exhaust. This synergistic scenario features partial energy detachment at the outer divertor while maintaining good plasma confinement ( H 98 ∼ 1) with minimal degradation. Two key features of this scenario are: (1) the SBI triggers a persistent Edge Harmonic Mode (EHM), which provides a crucial continuous particle transport channel, preventing Ne and tungsten/molybdenum accumulation without flushing out by ELM, and (2) the B + Ne mixture allows for active optimization of the radiated power profile. Core radiation can be reduced by substituting a portion of the Ne with B, leveraging their complementary non-coronal equilibrium radiation efficiencies. This combined B + Ne injection scheme presents a promising pathway toward integrated core-edge scenarios, offering the potential to minimize total impurity throughput while leveraging an actuator (powder injection) already being considered for ITER.
- Open Access
- 13 February 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (3) , 036028
Impact of toroidal magnetic field direction on integrated ELM-stable operation and divertor power exhaust via boron powder injection in EAST
We report the first in-depth comparison of the impact of toroidal magnetic field direction on solid boron injection used for Edge-Localized Mode (ELM) control, power exhaust, and core high- Z impurity control in the Experimental Advanced Superconducting Tokamak. With favorable ion ∇ B drift towards the upper X-point in an upper-single-null configuration, boron injection effectively suppresses ELMs, produces a detachment of the inner divertor target, and leads to improved energy confinement. ELM suppression in this configuration is accompanied by the excitation of an Edge Harmonic Mode. In contrast, with unfavorable ion ∇ B drift away from the upper X-point, boron injection also suppresses ELMs but leads to a more symmetric detachment state of both the inner and outer divertor targets, while plasma energy confinement is slightly degraded despite similar boron injection levels; a different low-frequency coherent mode without multiple harmonics is observed. Measurements from toroidally separated views show that the divertor response to boron injection is essentially toroidally symmetric, supporting the use of two-dimensional SOLPS-ITER modeling with a toroidally uniform impurity source. These experimental observations are qualitatively consistent with SOLPS-ITER simulations, which highlight the critical role of E × B drift effects in setting the Bt -dependent in–out asymmetry of detachment and in asymmetrically transporting particles and injected impurities within the scrape-off layer and private-flux region. These findings underscore the importance of drift physics and real-time wall conditioning in controlling low- Z impurity transport and optimizing edge solutions for integrated, ELM-stable, high-performance tokamak operation.
- 13 February 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (3) , 036028
Open AccessImpact of toroidal magnetic field direction on integrated ELM-stable operation and divertor power exhaust via boron powder injection in EAST
We report the first in-depth comparison of the impact of toroidal magnetic field direction on solid boron injection used for Edge-Localized Mode (ELM) control, power exhaust, and core high- Z impurity control in the Experimental Advanced Superconducting Tokamak. With favorable ion ∇ B drift towards the upper X-point in an upper-single-null configuration, boron injection effectively suppresses ELMs, produces a detachment of the inner divertor target, and leads to improved energy confinement. ELM suppression in this configuration is accompanied by the excitation of an Edge Harmonic Mode. In contrast, with unfavorable ion ∇ B drift away from the upper X-point, boron injection also suppresses ELMs but leads to a more symmetric detachment state of both the inner and outer divertor targets, while plasma energy confinement is slightly degraded despite similar boron injection levels; a different low-frequency coherent mode without multiple harmonics is observed. Measurements from toroidally separated views show that the divertor response to boron injection is essentially toroidally symmetric, supporting the use of two-dimensional SOLPS-ITER modeling with a toroidally uniform impurity source. These experimental observations are qualitatively consistent with SOLPS-ITER simulations, which highlight the critical role of E × B drift effects in setting the Bt -dependent in–out asymmetry of detachment and in asymmetrically transporting particles and injected impurities within the scrape-off layer and private-flux region. These findings underscore the importance of drift physics and real-time wall conditioning in controlling low- Z impurity transport and optimizing edge solutions for integrated, ELM-stable, high-performance tokamak operation.
- Open Access
- 2 January 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (1) , eadz3040
Accessing the density-free regime with ECRH-assisted ohmic start-up on EAST
High plasma density operation is crucial for a tokamak to achieve energy breakeven and burning plasma. However, there is often an empirical upper limit of electron density in tokamak operation, namely, the Greenwald density limit n G , above which tokamaks generally disrupt. Achieving high-density operation above the density limit has been a long-standing challenge in magnetic confinement fusion research. Here, we report experimental results on the Experimental Advanced Superconducting Tokamak (EAST) achieving line-averaged electron density in the range of (1.3 to 1.65) n G , significantly above the typical EAST operational range of (0.8 to 1.0) n G . This is performed with electron cyclotron resonance heating (ECRH)–assisted ohmic start-up and sufficiently high initial neutral density. These experiments are shown to operate in the density-free regime first predicted by a recent plasma-wall self-organization theory. These results suggest a promising scheme for substantially increasing the density limit in tokamaks, a critical advancement toward achieving burning plasma.
- 2 January 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (1) , eadz3040
Open AccessAccessing the density-free regime with ECRH-assisted ohmic start-up on EAST
High plasma density operation is crucial for a tokamak to achieve energy breakeven and burning plasma. However, there is often an empirical upper limit of electron density in tokamak operation, namely, the Greenwald density limit n G , above which tokamaks generally disrupt. Achieving high-density operation above the density limit has been a long-standing challenge in magnetic confinement fusion research. Here, we report experimental results on the Experimental Advanced Superconducting Tokamak (EAST) achieving line-averaged electron density in the range of (1.3 to 1.65) n G , significantly above the typical EAST operational range of (0.8 to 1.0) n G . This is performed with electron cyclotron resonance heating (ECRH)–assisted ohmic start-up and sufficiently high initial neutral density. These experiments are shown to operate in the density-free regime first predicted by a recent plasma-wall self-organization theory. These results suggest a promising scheme for substantially increasing the density limit in tokamaks, a critical advancement toward achieving burning plasma.
- Open Access
- 2 December 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (1) , 016039
Damage evolution and its impact of the W/Cu flat-type component for divertor target in EAST
W/Cu flat-type components are promising candidates for plasma-facing components in future fusion devices due to their flexible and efficient heat sink design. They are expected to be used in the inner/outer Reflector plates and Dome of ITER. To investigate their damage behaviors, a high-resolution infrared camera was employed to monitor the damaged C4 W/Cu flat-type component with a hypervapotron heat sink, located in the outer horizontal target (OHT) of the EAST lower divertor. The results show that the formation of W protrusions (‘Hills’) connects the early crack initiation stage with the final W exfoliation. To prevent further damage progression, it is recommended that for tokamaks, the damaged area be located two decay lengths away from the strike point—this distance is sufficient to guarantee safety. In such a scenario, if the damage lies within the private flux region, the parallel heat flux will be reduced to nearly zero. Although thermal performance degraded over time, the damaged OHT component was still able to maintain an approximate thermal equilibrium during each discharge, and no abnormal W impurity levels were observed. Linear fitting analysis estimates a total lifetime of approximately 3257 ± 277 shots, with a plasma stored energy of 298 ± 20 kJ corresponding to the onset of W melting in the surface protrusions. These findings shed light on the damage behavior of W/Cu flat-type components, provide key support for the development and validation of finite element analysis models, and offer practical guidance for the design and evaluation of ITER-like W/Cu flat-type components.
- 2 December 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (1) , 016039
Open AccessDamage evolution and its impact of the W/Cu flat-type component for divertor target in EAST
W/Cu flat-type components are promising candidates for plasma-facing components in future fusion devices due to their flexible and efficient heat sink design. They are expected to be used in the inner/outer Reflector plates and Dome of ITER. To investigate their damage behaviors, a high-resolution infrared camera was employed to monitor the damaged C4 W/Cu flat-type component with a hypervapotron heat sink, located in the outer horizontal target (OHT) of the EAST lower divertor. The results show that the formation of W protrusions (‘Hills’) connects the early crack initiation stage with the final W exfoliation. To prevent further damage progression, it is recommended that for tokamaks, the damaged area be located two decay lengths away from the strike point—this distance is sufficient to guarantee safety. In such a scenario, if the damage lies within the private flux region, the parallel heat flux will be reduced to nearly zero. Although thermal performance degraded over time, the damaged OHT component was still able to maintain an approximate thermal equilibrium during each discharge, and no abnormal W impurity levels were observed. Linear fitting analysis estimates a total lifetime of approximately 3257 ± 277 shots, with a plasma stored energy of 298 ± 20 kJ corresponding to the onset of W melting in the surface protrusions. These findings shed light on the damage behavior of W/Cu flat-type components, provide key support for the development and validation of finite element analysis models, and offer practical guidance for the design and evaluation of ITER-like W/Cu flat-type components.
- Open Access
- 29 August 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (10)
Active tungsten expulsion in ELM-absent H-mode plasmas via on-demand ELM triggering with lithium granule injection
Lithium granules gravitationally injected into the upper X-point region demonstrated on-demand ELM triggering in otherwise ELM-suppressed H-mode plasmas on the Experimental Advanced Superconducting Tokamak (EAST). Sub-mm lithium granules dropped into Enhanced D-alpha (EDA) H-mode plasmas achieved a high triggering efficiency, while enabling ELM frequencies from several to hundreds of hertz. Core radiation from heavy impurities, dominated by W, was reduced by up to 60%, and the normalized energy confinement increased by up to 30%. At low injection frequencies, ELMs of substantially reduced size compared to spontaneous type-I ELMs were observed. At high injection frequencies, a transition to a mixed ELM phase occurred, characterized by intermittent larger ELMs and suppression of the Quasi-Coherent Mode, achieving the most significant W reduction and energy confinement improvement. These results highlight a promising pathway for active W control via controlled, small ELMs in long-pulse, high-performance scenarios.
- 29 August 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (10)
Open AccessActive tungsten expulsion in ELM-absent H-mode plasmas via on-demand ELM triggering with lithium granule injection
Lithium granules gravitationally injected into the upper X-point region demonstrated on-demand ELM triggering in otherwise ELM-suppressed H-mode plasmas on the Experimental Advanced Superconducting Tokamak (EAST). Sub-mm lithium granules dropped into Enhanced D-alpha (EDA) H-mode plasmas achieved a high triggering efficiency, while enabling ELM frequencies from several to hundreds of hertz. Core radiation from heavy impurities, dominated by W, was reduced by up to 60%, and the normalized energy confinement increased by up to 30%. At low injection frequencies, ELMs of substantially reduced size compared to spontaneous type-I ELMs were observed. At high injection frequencies, a transition to a mixed ELM phase occurred, characterized by intermittent larger ELMs and suppression of the Quasi-Coherent Mode, achieving the most significant W reduction and energy confinement improvement. These results highlight a promising pathway for active W control via controlled, small ELMs in long-pulse, high-performance scenarios.
- 1 July 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (07) , C07016
First observation of full radial profile of Zeff using a high-performance visible spectrometer in EAST tokamak with full tungsten divertors
The effective ion charge, Zeff, is a critical parameter in quantifying the impurity content and collisionality, and studying neutron yield and impurity transport in magnetically confined fusion plasmas. In order to obtain a full radial Zeff profile in the EAST tokamak, a visible spectrometer system with endscope type optics has been newly developed. A vertical profile of visible bremsstrahlung continuum is observed at 597.8±1.0 nm with well-focused fiber images in a typical L-mode discharge. A local emissivity profile of the visible bremsstrahlung is analyzed using Abel inversion algorithm. The Zeff radial profile is thus obtained for the first time in the EAST experiment.
- 1 July 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (07) , C07016
First observation of full radial profile of Zeff using a high-performance visible spectrometer in EAST tokamak with full tungsten divertors
The effective ion charge, Zeff, is a critical parameter in quantifying the impurity content and collisionality, and studying neutron yield and impurity transport in magnetically confined fusion plasmas. In order to obtain a full radial Zeff profile in the EAST tokamak, a visible spectrometer system with endscope type optics has been newly developed. A vertical profile of visible bremsstrahlung continuum is observed at 597.8±1.0 nm with well-focused fiber images in a typical L-mode discharge. A local emissivity profile of the visible bremsstrahlung is analyzed using Abel inversion algorithm. The Zeff radial profile is thus obtained for the first time in the EAST experiment.
- 1 July 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (07) , C07002
Machine learning application to wavelength calibration for Extreme Ultraviolet (EUV) spectroscopy in EAST tokamak
In Extreme Ultraviolet (EUV) spectra spanning from 5 to 500 Å captured in EAST plasma, numerous emission lines and multiple unresolved transition arrays (UTAs) originating from low-, medium-, and high-Z impurity ions coexist. This complexity makes wavelength calibration crucial for accurate spectral line identification and reliable quantitative analysis. In view of the lack of a standard light source and experimental spectral variations, two in-situ calibration methods have been developed, and corresponding EAST impurity line databases established. However, these traditional approaches are labor-intensive and time-consuming. This study introduces a groundbreaking wavelength calibration method integrating machine learning algorithms. Initially, Linear Regression Models (LRMs) are trained using established impurity line databases to conduct preliminary calibration. Subsequently, the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm, segmented polynomial approximation fitting, and emission line peak fitting techniques are employed to formulate three unsupervised objective functions, enabling real-time iterative optimization of peak pixel positions and refining calibration accuracy. Experimental results showcase that the developed method reduces wavelength uncertainty by an order of magnitude, validating its effectiveness and suitability. To further enhance practical utility, user-friendly interactive software has been developed, streamlining the implementation of this innovative calibration technique.
- 1 July 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (07) , C07002
Machine learning application to wavelength calibration for Extreme Ultraviolet (EUV) spectroscopy in EAST tokamak
In Extreme Ultraviolet (EUV) spectra spanning from 5 to 500 Å captured in EAST plasma, numerous emission lines and multiple unresolved transition arrays (UTAs) originating from low-, medium-, and high-Z impurity ions coexist. This complexity makes wavelength calibration crucial for accurate spectral line identification and reliable quantitative analysis. In view of the lack of a standard light source and experimental spectral variations, two in-situ calibration methods have been developed, and corresponding EAST impurity line databases established. However, these traditional approaches are labor-intensive and time-consuming. This study introduces a groundbreaking wavelength calibration method integrating machine learning algorithms. Initially, Linear Regression Models (LRMs) are trained using established impurity line databases to conduct preliminary calibration. Subsequently, the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm, segmented polynomial approximation fitting, and emission line peak fitting techniques are employed to formulate three unsupervised objective functions, enabling real-time iterative optimization of peak pixel positions and refining calibration accuracy. Experimental results showcase that the developed method reduces wavelength uncertainty by an order of magnitude, validating its effectiveness and suitability. To further enhance practical utility, user-friendly interactive software has been developed, streamlining the implementation of this innovative calibration technique.