Caro Meysmans
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Caro Meysmans has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Guy Torfs
Ghent University
6 shared publications - Achim Vandierendonck
Ghent University
5 shared publications - Piet Demeester
Department of Information Technology, Ghent University/imec, Ghent, Belgium
2 shared publications - Pieter Rombouts
Department of Electronics and Information Systems, Ghent University, Ghent, Belgium
2 shared publications - Xin Wang
IDLab, Department of Information Technology, imec Ghent University, Technologypark Zwijnaarde 126, Ghent, Belgium
2 shared publications - Amalia Miliou
Aristotle University of Thessaloniki
1 shared publication
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (10) , 6550-6560
Distortion Cancellation in Asynchronous Sigma--Delta Modulators
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (10) , 6550-6560
Distortion Cancellation in Asynchronous Sigma--Delta Modulators
- 23 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-8
100 Gbit/s Secure and Real-Time Vacuum Fluctuation Based Quantum Random Number Generator
True randomness is an essential requirement in numerous classical and quantum cryptographic systems and applications to guarantee secure communication, necessitating the research and design of promising quantum random number generators. As communication systems become more randomness consuming, current generators fail to deliver the required throughput mainly due to slow and often delayed post-processing. To address these performance issues, this work presents an FPGA-based quantum random number generator based on our previous work that uses a low optical power, custom-designed integrated vacuum fluctuation source. An adaptive, efficient and fast Toeplitz hashing scheme is developed with a configurable security factor, making it suitable for a wide range of applications. The high clearance and large bandwidth of the low-noise photonic-electronic detector in combination with hardware accelerated processing makes it possible for the presented dual channel generator to deliver a record generation rate of 100.3 Gbit/s for secure usage in real-time. Due to the small form factor, the design shows promise to be fully integrated into a custom-packaged device.
- 23 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-8
100 Gbit/s Secure and Real-Time Vacuum Fluctuation Based Quantum Random Number Generator
True randomness is an essential requirement in numerous classical and quantum cryptographic systems and applications to guarantee secure communication, necessitating the research and design of promising quantum random number generators. As communication systems become more randomness consuming, current generators fail to deliver the required throughput mainly due to slow and often delayed post-processing. To address these performance issues, this work presents an FPGA-based quantum random number generator based on our previous work that uses a low optical power, custom-designed integrated vacuum fluctuation source. An adaptive, efficient and fast Toeplitz hashing scheme is developed with a configurable security factor, making it suitable for a wide range of applications. The high clearance and large bandwidth of the low-noise photonic-electronic detector in combination with hardware accelerated processing makes it possible for the presented dual channel generator to deliver a record generation rate of 100.3 Gbit/s for secure usage in real-time. Due to the small form factor, the design shows promise to be fully integrated into a custom-packaged device.
- 10 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (1) , 318-330
A Duty-Cycle Switching 30-Gb/s Burst-Mode CDR With 1.6-ns Locking Time in 28-nm CMOS
This article presents a closed-loop type burst-mode clock and data recovery (BM-CDR) circuit with fast phase offset detection using 8/3x-fractional oversampling in the periodic preamble. The proposed phase offset detector achieves a resolution of 1/8 unit intervals (UIs) with a detection time of 4 UIs. A 2x-oversampling closed-loop bang-bang CDR is performed after the phase offset detection to provide jitter filtering. The switching between these two different oversampling ratios is realized in a single multi-phase clock generator (MPCG) by changing the duty-cycle in four differential quarter-rate clocks. Furthermore, fast duty-cycle switching (DCS) is introduced in the injection-locked ring oscillator (ILRO) design to speed up the transition from one sampling ratio to another. A prototype fabricated in 28-nm CMOS achieves a locking time of 1.6 ns at 30-Gb/s data rate, a BER of 1E-12 with a recovered clock integrated rms jitter of 398.4 fs. The jitter tolerance curve shows a corner frequency around 20 MHz with a 20-dB/dec slope in the low-frequency region. The receiver including the proposed CDR consumes 75.53 mW with 0.9-V supply and occupies an area of 0.148 mm2.
- 10 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (1) , 318-330
A Duty-Cycle Switching 30-Gb/s Burst-Mode CDR With 1.6-ns Locking Time in 28-nm CMOS
This article presents a closed-loop type burst-mode clock and data recovery (BM-CDR) circuit with fast phase offset detection using 8/3x-fractional oversampling in the periodic preamble. The proposed phase offset detector achieves a resolution of 1/8 unit intervals (UIs) with a detection time of 4 UIs. A 2x-oversampling closed-loop bang-bang CDR is performed after the phase offset detection to provide jitter filtering. The switching between these two different oversampling ratios is realized in a single multi-phase clock generator (MPCG) by changing the duty-cycle in four differential quarter-rate clocks. Furthermore, fast duty-cycle switching (DCS) is introduced in the injection-locked ring oscillator (ILRO) design to speed up the transition from one sampling ratio to another. A prototype fabricated in 28-nm CMOS achieves a locking time of 1.6 ns at 30-Gb/s data rate, a BER of 1E-12 with a recovered clock integrated rms jitter of 398.4 fs. The jitter tolerance curve shows a corner frequency around 20 MHz with a 20-dB/dec slope in the low-frequency region. The receiver including the proposed CDR consumes 75.53 mW with 0.9-V supply and occupies an area of 0.148 mm2.
- 9 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (4) , 1595-1603
A Bi-Directional Distributed Multi-User MIMO Testbed Using Digital Sigma-Delta-Over-Fiber
Sigma-Delta modulated signals over fiber is proposed for fronthauling of distributed signals. (AROF) provides perfect synchronization, but linearity is directly impacted by the required circuit elements. (DRoF) has a low cost of implementation but complicates synchronization. Sigma-Delta modulated signals over fiber combines the synchronization benefit from ARoF and the low cost of DRoF. In this work, we show a simplified and synchronous distributed multiple-input multiple-output (MIMO) communication system for both up-link and down-link transmission, based on our real-time sigma-delta modulated signals over fiber front-haul network. The testbed uses a carrier frequency of 3.686 GHz and is composed of 4 distributed units with 4 antennas each, totaling 16 antennas. The received clock is used to provide synchronization between the central and distributed units. With this implementation, we demonstrate distributed multi-user MIMO. The synchronicity of the system is demonstrated by performing over-the-air channel reciprocity calibration and reciprocity-based uplink transmission. This is verified using 64-QAM OFDM symbols. Measurement results for 2 users / 4 users show an average error vector magnitude for up-link of 2.51% (-32.02 dB) / 2.89% (-30.79 dB) and for down-link of 4.23% (-27.48 dB) / 6.09% (-24.31 dB) respectively.
- 9 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (4) , 1595-1603
A Bi-Directional Distributed Multi-User MIMO Testbed Using Digital Sigma-Delta-Over-Fiber
Sigma-Delta modulated signals over fiber is proposed for fronthauling of distributed signals. (AROF) provides perfect synchronization, but linearity is directly impacted by the required circuit elements. (DRoF) has a low cost of implementation but complicates synchronization. Sigma-Delta modulated signals over fiber combines the synchronization benefit from ARoF and the low cost of DRoF. In this work, we show a simplified and synchronous distributed multiple-input multiple-output (MIMO) communication system for both up-link and down-link transmission, based on our real-time sigma-delta modulated signals over fiber front-haul network. The testbed uses a carrier frequency of 3.686 GHz and is composed of 4 distributed units with 4 antennas each, totaling 16 antennas. The received clock is used to provide synchronization between the central and distributed units. With this implementation, we demonstrate distributed multi-user MIMO. The synchronicity of the system is demonstrated by performing over-the-air channel reciprocity calibration and reciprocity-based uplink transmission. This is verified using 64-QAM OFDM symbols. Measurement results for 2 users / 4 users show an average error vector magnitude for up-link of 2.51% (-32.02 dB) / 2.89% (-30.79 dB) and for down-link of 4.23% (-27.48 dB) / 6.09% (-24.31 dB) respectively.
- 15 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (10) , 4442-4446
A Multi-GHz Inverter-Based ASDM With Distortion Cancellation
This brief proposes and demonstrates an asynchronous sigma-delta modulator (ASDM) which is based entirely on pseudo-digital inverters. To achieve multi-GHz operation, the proposed ASDM employs a delay-based approach, with a quantizer consisting of a cascade of pseudo-differential inverters. The loop filter is a Gm-RC low-pass filter with a Nauta transconductor 1, which consists of two input inverter pairs loaded by a self-coupled and cross-coupled inverter pair. By suitably sizing the loop filter, the non-linearity of the quantizer compensates the non-linearity of the transconductor. Fabricated in 28nm CMOS, the prototype oscillates at 6.9 GHz, achieving an SNDR of 46.5 dB and a dynamic range of 56.6 dB over a 500MHz bandwidth. The prototype occupies an area of 58 (μm)2, and consumes a power of 2.6mW from a 0.9V supply.
- 15 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (10) , 4442-4446
A Multi-GHz Inverter-Based ASDM With Distortion Cancellation
This brief proposes and demonstrates an asynchronous sigma-delta modulator (ASDM) which is based entirely on pseudo-digital inverters. To achieve multi-GHz operation, the proposed ASDM employs a delay-based approach, with a quantizer consisting of a cascade of pseudo-differential inverters. The loop filter is a Gm-RC low-pass filter with a Nauta transconductor 1, which consists of two input inverter pairs loaded by a self-coupled and cross-coupled inverter pair. By suitably sizing the loop filter, the non-linearity of the quantizer compensates the non-linearity of the transconductor. Fabricated in 28nm CMOS, the prototype oscillates at 6.9 GHz, achieving an SNDR of 46.5 dB and a dynamic range of 56.6 dB over a 500MHz bandwidth. The prototype occupies an area of 58 (μm)2, and consumes a power of 2.6mW from a 0.9V supply.
- 13 November 2023
- Published by Institution of Engineering and Technology (IET) in IET Conference Proceedings
- Vol. 2023 (34) , 302-305
First real-time demonstration of a flexible multi-λ DRoF/ARoF/SDoF transport for fiber/mmWave RAN
A reconfigurable, technology-agnostic X-haul optical infrastructure with active wavelength routing for converged A-RoF/D-Band, D-RoF/E-Band and SDoF streams was demonstrated. The deployed SDN-enabled AWGR-based transport topology supported real-world services including HD video and mobile traffic.
- 13 November 2023
- Published by Institution of Engineering and Technology (IET) in IET Conference Proceedings
- Vol. 2023 (34) , 302-305
First real-time demonstration of a flexible multi-λ DRoF/ARoF/SDoF transport for fiber/mmWave RAN
A reconfigurable, technology-agnostic X-haul optical infrastructure with active wavelength routing for converged A-RoF/D-Band, D-RoF/E-Band and SDoF streams was demonstrated. The deployed SDN-enabled AWGR-based transport topology supported real-world services including HD video and mobile traffic.
- Open Access
- 3 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (23) , 11471
A Bit-Interleaved Sigma-Delta-Over-Fiber Fronthaul Network for Frequency-Synchronous Distributed Antenna Systems
Cell-free massive multiple-input multiple-output (MIMO) has attracted wide attention as wireless spectral efficiency has become a 6G key performance indicator. The distributed scheme improves the spectral efficiency and user fairness, but the fronthaul network must evolve to enable it. This work demonstrates a fronthaul network for distributed antenna systems enabled by the bit-interleaved sigma-delta-over-fiber (BISDoF) concept: multiple sigma-delta modulated baseband signals are time-interleaved into one non-return-to-zero (NRZ) signal, which is converted to the optical domain by a commercial QSFP and transmitted over fiber. The BISDoF concept improves the optical bit-rate efficiency while keeping the remote unit complexity sufficiently low. The implementation successfully deals with an essential challenge—precise frequency synchronization of different remote units. Moreover, owing to the straightforward data paths, all transceivers inherently transmit or receive with fixed timing offsets which can be easily calibrated. The error vector magnitudes of both the downlink and uplink data paths are less than 2.8% (–31 dB) when transmitting 40.96 MHz-bandwidth OFDM signals (256-QAM) centered around 3.6 GHz. (Optical path: 100 m multi-mode fibers; wireless path: electrical back-to-back.) Without providing an extra reference clock, the two remote units were observed to have the same carrier frequency; the standard deviation of the relative jitter was 9.43 ps.
- 3 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (23) , 11471
Open AccessA Bit-Interleaved Sigma-Delta-Over-Fiber Fronthaul Network for Frequency-Synchronous Distributed Antenna Systems
Cell-free massive multiple-input multiple-output (MIMO) has attracted wide attention as wireless spectral efficiency has become a 6G key performance indicator. The distributed scheme improves the spectral efficiency and user fairness, but the fronthaul network must evolve to enable it. This work demonstrates a fronthaul network for distributed antenna systems enabled by the bit-interleaved sigma-delta-over-fiber (BISDoF) concept: multiple sigma-delta modulated baseband signals are time-interleaved into one non-return-to-zero (NRZ) signal, which is converted to the optical domain by a commercial QSFP and transmitted over fiber. The BISDoF concept improves the optical bit-rate efficiency while keeping the remote unit complexity sufficiently low. The implementation successfully deals with an essential challenge—precise frequency synchronization of different remote units. Moreover, owing to the straightforward data paths, all transceivers inherently transmit or receive with fixed timing offsets which can be easily calibrated. The error vector magnitudes of both the downlink and uplink data paths are less than 2.8% (–31 dB) when transmitting 40.96 MHz-bandwidth OFDM signals (256-QAM) centered around 3.6 GHz. (Optical path: 100 m multi-mode fibers; wireless path: electrical back-to-back.) Without providing an extra reference clock, the two remote units were observed to have the same carrier frequency; the standard deviation of the relative jitter was 9.43 ps.