Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


DeMichael D. Winfield has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Synthesis and Physical Properties of Hempseed and High‐Oleic Hempseed Oil Estolides

    by Randy L. Lin, DeMichael D. Winfield, Paul A. Isbell, Roque L. Evangelista, Benjamin Raymond, Steven C. Cermak

    Hempseed oil (HSO) bears the unique property of its fatty acid profiles being unusually rich with polyunsaturated fatty acids. While the presence of numerous olefins would make this oil prone to oxidation, the presence of this functional group can be exploited to form oligomers called estolides, improving their oxidative stability and cold flow properties. In this work, a series of estolides were synthesized from HSO and high‐oleic HSO (HOHSO) which are capped with fatty acids of varying chain length and esterified with 2‐ethylhexanol (2‐EH). The estolides capped with shorter chain saturated fatty acids (C8–C14) exhibited excellent cold flow properties, with pour points of −36°C and lower. Estolides prepared from HSO had higher kinematic viscosities than those prepared from HOHSO. HOHSO estolides bore physical properties similar to estolides synthesized from oleic‐rich oils, which is advantageous for applications as bio‐based motor oils. Furthermore, the HSO/2‐EH estolide capped with a shorter chain fatty acid of the series synthesized (specifically caprylic/octanoic acid, C8:0) bore an unusually high kinematic viscosity compared to the rest of the series capped with longer chain fatty acids.

  • Open Access

    Physicochemical characterization of Orychophragmus violaceus seeds and oil, a potential source of dihydroxy-fatty acids

    by DeMichael D. Winfield, Roque L. Evangelista, Bryan R. Moser, William T. Hay, Jill K. Winkler-Moser, Grigor B. Bantchev, Steven C. Cermak


  • Open Access

    Structure–Property Relationships of Lignin-Derived Semiaromatic Poly(ether ester)s

    by Ryan K. Maynard, Kush G. Patel, Huiming Wu, Frida C. Knudsen, Imrie C. Ross, DeMichael D. Winfield, Jason J. Locklin

    Semiaromatic polyesters derived from petroleum are an important class of polymers that encompass a wide variety of thermal and mechanical properties. Unfortunately, replacing the aromatic component with cost-competitive bioderived monomers is an ongoing challenge. This work describes the synthesis of nine different polyesters made from AB monomers that can be derived from lignin, starting with phloretic, coumaric, and ferulic acids and similar derivatives. The polyesters were synthesized at >50 g scale, and full characterization of the thermal, mechanical, and rheological properties is included. The polymers exhibit excellent thermal stability, a T g range of 16-65 °C, tensile moduli ranging from 4.6 to 1200 MPa, and elongation at break ranging from 7.5% to greater than 3800%. To examine the effects of structural permutations among the polymer series, TTS master curves were constructed for seven polyesters using melt rheology. Properties such as packing length and characteristic ratio are described and compared among the series. Finally, it is demonstrated that these polyesters are easily chemically recycled to monomer in high yield.


  • Fuel Properties of High Oleic Pennycress Oil Derived Biodiesel and Its Blends With Ultra‐Low Sulfur Diesel

    by DeMichael D. Winfield, Robert O. Dunn, M. David Marks

    Field Pennycress is an emerging crop for nonedible seed oil. In the Midwestern United States, it can be employed as a cover crop between corn and soybean seasons. This makes it an attractive feedstock for producing biodiesel without interfering with commodity food crops. Classical mutagenesis has been applied to develop different varieties of pennycress with desirable properties for biodiesel. In this study, we evaluated the fuel properties of biodiesel produced from the seed oil of a new pennycress variety, high oleic pennycress (HOP). The oil was converted to fatty acid methyl esters (FAMEs) and analyzed according to the ASTM standard for biodiesel. HOP biodiesel exhibited cold flow properties superior to those of biodiesel derived from other pennycress varieties and vegetable oils, with cloud point, pour point, and cold filter plug points of −19.7°C, −21°C, and −15.7°C respectively. The oxidative stability of the biodiesel was poor, with an induction period at 110°C of 0.46 h, indicating that additives would be needed for commercial use. Kinematic viscosity at 40°C was 4.113 mm2 s−1, meeting both the ASTM and EN biodiesel standard. The biodiesel had an average wear scar of 188 μm, demonstrating good lubrication properties. The efficacy of HOP biodiesel as an additive for ultra‐low sulfur diesel was also evaluated. Loadings of 2% and 5% biodiesel were effective in terms of improving lubricity while maintaining sufficient oxidative stability. This work demonstrates the potential of HOP as a valuable wintertime oil seed crop for producing biodiesel in the Midwestern United States.


  • Open Access

    Cold-Flow Properties of Estolides: The Older (D97 and D2500) versus the Mini-(D5773 and D5949) Methods

    by Grigor B. Bantchev, Helen Ngo, Yunzhi Chen, DeMichael D. Winfield, Steven C. Cermak

    There is growing research on developing new and sustainable lubricants. Sustainable lubricants with adequate cold-flow properties are of particular interest for many applications. One limitation of the established methods for measuring cold flow properties is the large volume needed to test samples. This makes initial screening of many hard-to-synthesize samples difficult. In the current study, we compared the results of the older, widely accepted ASTM methods D97 (pour point, PP) and D2500 (cloud point, CP) to the newer, smaller-volume, and easier-to-perform methods D5949 and D5773 for bio-based base oils (estolides and iso-estolides). The CP results were in good agreement for less colored samples, but D5773 gave lower values for some darker (Gardner color >8) samples, especially esters. The D5949 showed a tendency to report slightly higher PP, especially for the lower values. Viscosities and densities in a wide temperature range (15 to 120 °C) were also measured. The surface tensions were estimated by a literature group method. Viscosity and density effects can only partially explain the differences in the PP values from the two methods. In conclusion, the newer mini-methods are an acceptable substitution when larger volumes are not accessible, unless the sample is too dark.

  • Evaluation of a high oleic soybean oil variety in lubricant and biodiesel applications

    by DeMichael D. Winfield, Steven C. Cermak, Roque L. Evangelista, Bryan R. Moser, Justin McKinney, Vince Pantalone

    Soybean oil is an abundant commodity crop that has garnered attention for its use as a feedstock for sustainable materials. Soybean oil is high in polyunsaturated fatty acid content, which can promote undesirable properties in biodiesel and lubricant applications. In this work, we characterized the fatty acid composition of commercial soybean oil along with two other soybean oil varieties, Ellis and TN18‐4110. Ellis and commercial soybean oils had similar fatty acid compositions, while TN18‐4110 was enriched in the monounsaturated oleic acid. Biodiesel and estolides were prepared from the three varieties and the relevant physical properties were measured. In comparison to commercial soybean diesel, both Ellis and TN18‐4110 exhibited unique advantages. As estolide‐based lubricants, all three varieties had advantageous cold flow properties, but TN18‐4110 also possessed excellent oxidative stability and lower viscosity. The physical properties and structural property relationships of the biodiesel and estolides are discussed.


  • Selective hydroxyalkoxylation of epoxidized methyl oleate by an amphiphilic ionic liquid catalyst

    by DeMichael D. Winfield, Bryan R. Moser

    Oleic acid is an attractive biobased platform chemical. Precursors for biobased materials can be accessed by epoxidation and subsequent hydroxyalkoxylation of oleic acid. The hydroxyalkoxylation step is conventionally performed with sulfuric acid or a metal catalyst. Due to their high polarity, many ionic liquid catalysts are ineffective for hydroxyalkoxylation of fatty acid derivatives with non‐polar alcohols. In this work, we utilized an amphiphilic ionic liquid catalyst to perform hydroxyalkoxylations of epoxidized methyl oleate. An ionic liquid catalyst based on dimethyl lauryl amine was synthesized and evaluated for this reaction due to its long alkyl group. The amphiphilic nature of the ionic liquid allowed for better miscibility and reactivity compared to other ionic liquids. Several alcohols were used with high yields (≥80%) and selectivity (≥92%), including nonpolar alcohols with longer alkyl chains such as octanol and dodecanol. The high selectivity of these conditions could be advantageous for applications in lubricants, biofuels, or polyol preparation. This work demonstrates a greener alternative to conventional hydroxyalkoxylation catalysts.


  • Semi-aromatic biobased polyesters derived from lignin and cyclic carbonates

    by DeMichael Winfield, John Ring, Jessica Horn, Evan M. White, Jason Locklin

    Synthesis, characterization, and compostability of several biobased polyesters with a wide array of thermoplastic and elastic properties are described.