Abid Hussain
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abid Hussain has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Xunchang Fei
School of Civil and Environmental Engineering, Nanyang Technological University, Singapore, Singapore
4 shared publications Vijaya Raghavan
Department of Bioresource Engineering, McGill University
3 shared publications- Amit Sharma
Vivekananda Global University
2 shared publications - Banu Örmeci
Department of Civil and Environmental Engineering, Carleton University, 1125 Colonel By Drive, Ottawa, ON K1S 5B6, Canada
2 shared publications - Ahmed Abdullah Hussein
Al-Farahidi University
1 shared publication - Ahmed Ali Hussein
Al-Turath University
1 shared publication
Latest Publications
- 31 July 2026
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 233
Bioelectrochemically Enhanced Anaerobic Digestion of Brewery Wastewater at Ambient Temperature: Performance, Methane Yield, and Energy Efficiency
Bioelectrochemically-enhanced anaerobic digestion (BEAD) has emerged as a promising approach to improve methane production and process stability during the treatment of high-strength industrial wastewater. In this study, a continuous upflow BEAD reactor was operated for 365 days to evaluate its performance in treating real brewery wastewater at ambient temperature (22-24 °C). The effects of organic loading rate (OLR; 1-7 g sCOD/L∙d), hydraulic retention time (HRT), and applied potential (1.2 V) on organic matter removal, volatile fatty acid (VFA) degradation, methane production, and energy efficiency were systematically investigated and compared with conventional anaerobic digestion (AD). The BEAD system achieved high chemical oxygen demand (COD) removal efficiencies (>92%) at OLRs up to 5 g sCOD/L∙d and demonstrated superior degradation of complex VFAs, particularly propionic and butyric acids. Methane yield increased with increasing OLR, reaching a maximum of 0.35 LCH₄/g sCODRemoved at an OLR of 7 g sCOD/L∙d. Compared with AD, BEAD enhanced methane production by 16-30% at higher OLRs while maintaining stable biogas quality (≈74-75% CH₄). Although shortening HRT at high OLRs reduced overall performance, BEAD consistently outperformed AD. The system exhibited high energy efficiency (~1000%), suggesting it could serve as a robust, highly energy-efficient candidate for brewery wastewater treatment in cold regions.
- 31 July 2026
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 233
Bioelectrochemically Enhanced Anaerobic Digestion of Brewery Wastewater at Ambient Temperature: Performance, Methane Yield, and Energy Efficiency
Bioelectrochemically-enhanced anaerobic digestion (BEAD) has emerged as a promising approach to improve methane production and process stability during the treatment of high-strength industrial wastewater. In this study, a continuous upflow BEAD reactor was operated for 365 days to evaluate its performance in treating real brewery wastewater at ambient temperature (22-24 °C). The effects of organic loading rate (OLR; 1-7 g sCOD/L∙d), hydraulic retention time (HRT), and applied potential (1.2 V) on organic matter removal, volatile fatty acid (VFA) degradation, methane production, and energy efficiency were systematically investigated and compared with conventional anaerobic digestion (AD). The BEAD system achieved high chemical oxygen demand (COD) removal efficiencies (>92%) at OLRs up to 5 g sCOD/L∙d and demonstrated superior degradation of complex VFAs, particularly propionic and butyric acids. Methane yield increased with increasing OLR, reaching a maximum of 0.35 LCH₄/g sCODRemoved at an OLR of 7 g sCOD/L∙d. Compared with AD, BEAD enhanced methane production by 16-30% at higher OLRs while maintaining stable biogas quality (≈74-75% CH₄). Although shortening HRT at high OLRs reduced overall performance, BEAD consistently outperformed AD. The system exhibited high energy efficiency (~1000%), suggesting it could serve as a robust, highly energy-efficient candidate for brewery wastewater treatment in cold regions.
- 1 April 2026
- Published by Springer Nature
- p. 3-13
Optimized Hybrid Framework for Knowledge Extraction Using Data Mining and Machine Learning Techniques
- 1 April 2026
- Published by Springer Nature
- p. 3-13
Optimized Hybrid Framework for Knowledge Extraction Using Data Mining and Machine Learning Techniques
- 1 April 2026
- Published by Springer Nature
- p. 437-449
An Efficient Framework for Opinion Mining Using Text Classification and NLP Tools
- 1 April 2026
- Published by Springer Nature
- p. 437-449
An Efficient Framework for Opinion Mining Using Text Classification and NLP Tools
- 1 April 2026
- Published by Springer Nature
- p. 39-49
RFD Model Based Data Integration in Dengue Domain
- Open Access
Carboxylic Acid Production from Organic Waste: Integrating Substrate Composition, Reactor Configuration, Inoculum, and Future Perspectives
Acidogenic fermentation is a promising biotechnology for converting organic wastes into carboxylic acid (CA), which has significant commercial value and diverse applications in the food, chemical, pharmaceutical, and cosmetic industries. However, major challenges such as limited substrate hydrolysis and lower CA production hinder further development of this biotechnology towards full-scale implementation. This review provides a comprehensive overview of the current status of acidogenic fermentation, focusing on substrate composition, inoculum, and reactor design, along with potential strategies to overcome reactor-specific limitations and enhance CA production. It was found that the substrate composition, particularly its carbohydrate, protein, and lipid contents, strongly influences both CA production and yield. Specifically, carbohydrate-rich substrates yield higher CA production compared to protein- and lipid-rich substrates. These substrates have been investigated in different reactor configurations for CA production. Among them, the leachate bed reactor and anaerobic membrane bioreactor have demonstrated superior performance, achieving higher CA production with acetic and butyric acids as the dominant CA composition. These reactors are generally operated using three types of inocula: aerobic and anaerobic inoculum, enriched inoculum, and rumen microorganisms. Interestingly, rumen microorganisms are effective in degrading complex substrates, whereas enriched inoculum accelerates hydrolysis and acidogenesis processes within a shorter fermentation time. The findings presented herein will provide valuable information for addressing the challenges associated with acidogenic fermentation and lay the foundation for future research aimed at upscaling this biotechnology to a commercial scale.
Open AccessCarboxylic Acid Production from Organic Waste: Integrating Substrate Composition, Reactor Configuration, Inoculum, and Future Perspectives
Acidogenic fermentation is a promising biotechnology for converting organic wastes into carboxylic acid (CA), which has significant commercial value and diverse applications in the food, chemical, pharmaceutical, and cosmetic industries. However, major challenges such as limited substrate hydrolysis and lower CA production hinder further development of this biotechnology towards full-scale implementation. This review provides a comprehensive overview of the current status of acidogenic fermentation, focusing on substrate composition, inoculum, and reactor design, along with potential strategies to overcome reactor-specific limitations and enhance CA production. It was found that the substrate composition, particularly its carbohydrate, protein, and lipid contents, strongly influences both CA production and yield. Specifically, carbohydrate-rich substrates yield higher CA production compared to protein- and lipid-rich substrates. These substrates have been investigated in different reactor configurations for CA production. Among them, the leachate bed reactor and anaerobic membrane bioreactor have demonstrated superior performance, achieving higher CA production with acetic and butyric acids as the dominant CA composition. These reactors are generally operated using three types of inocula: aerobic and anaerobic inoculum, enriched inoculum, and rumen microorganisms. Interestingly, rumen microorganisms are effective in degrading complex substrates, whereas enriched inoculum accelerates hydrolysis and acidogenesis processes within a shorter fermentation time. The findings presented herein will provide valuable information for addressing the challenges associated with acidogenic fermentation and lay the foundation for future research aimed at upscaling this biotechnology to a commercial scale.
- Open Access
- 27 December 2025
- Published by MDPI AG in Bioengineering
- Vol. 13 (1) , 31
High-Rate Bioelectrochemical Anaerobic Digester for Biomethane Production from Food Waste
This study investigated methane (CH4) production in a bioelectrochemically enhanced anaerobic digester (BEAD) equipped with a pair of 3-dimensional flow-through electrodes made of conductive polypropylene biorings. The performance of the BEAD reactor was compared to that of a similarly sized Anaerobic Upflow Sludge Bed (UASB) reactor. The reactors were operated at a temperature of 22 ± 1 °C using food waste (FW) leachate fed at organic loading rates of 3–8 g (LR d)−1 or at a temperature of 35 ± 1 °C using the liquid fraction of FW separated using a screw press. With both tested feedstocks, the BEAD reactor demonstrated up to 30% higher CH4 yield, reaching 0.35–0.38 L g−1 (COD consumed), compared to the UASB reactor. Additionally, reactor stability under organic overload conditions improved, with the difference more pronounced at organic loads above 6 g (LR d)−1. Energy consumption for bioelectrochemical CH4 production was estimated at 5.1–12.4 Wh L−1 (of CH4 produced), which is significantly below the energy consumption for electrochemical H2-based methanation. Overall, BEAD increases methane production and improves process stability, offering a novel sustainable solution for waste management.
- 27 December 2025
- Published by MDPI AG in Bioengineering
- Vol. 13 (1) , 31
Open AccessHigh-Rate Bioelectrochemical Anaerobic Digester for Biomethane Production from Food Waste
This study investigated methane (CH4) production in a bioelectrochemically enhanced anaerobic digester (BEAD) equipped with a pair of 3-dimensional flow-through electrodes made of conductive polypropylene biorings. The performance of the BEAD reactor was compared to that of a similarly sized Anaerobic Upflow Sludge Bed (UASB) reactor. The reactors were operated at a temperature of 22 ± 1 °C using food waste (FW) leachate fed at organic loading rates of 3–8 g (LR d)−1 or at a temperature of 35 ± 1 °C using the liquid fraction of FW separated using a screw press. With both tested feedstocks, the BEAD reactor demonstrated up to 30% higher CH4 yield, reaching 0.35–0.38 L g−1 (COD consumed), compared to the UASB reactor. Additionally, reactor stability under organic overload conditions improved, with the difference more pronounced at organic loads above 6 g (LR d)−1. Energy consumption for bioelectrochemical CH4 production was estimated at 5.1–12.4 Wh L−1 (of CH4 produced), which is significantly below the energy consumption for electrochemical H2-based methanation. Overall, BEAD increases methane production and improves process stability, offering a novel sustainable solution for waste management.
- Open Access
- 27 October 2025
- Published by MDPI AG in Fermentation
- Vol. 11 (11) , 610
Harnessing Bioelectrochemical and Anaerobic Systems for the Degradation of Bioplastics: Application Potential and Future Directions
As the environmental burden of traditional plastics continues to grow, bioplastics (BPs) have emerged as a promising alternative due to their renewable origins and potential for biodegradability. However, the most popular anaerobic systems (ASs)—anaerobic digestion (AD), acidogenic fermentation (AF), and enzyme hydrolysis (EH)—for BPs degradation still face many challenges, e.g., low degradation efficiency, process instability, etc. As a sustainable clean energy technology, bioelectrochemical systems (BESs) have demonstrated strong potential in the treatment of complex organic waste when integrated with ASs. Nevertheless, research on the synergistic degradation of BPs using BES-ASs remains relatively limited. This review systematically summarizes commonly used anaerobic degradation methods for BPs, along with their advantages and limitations, and highlights the BES-AS as an innovative strategy to enhance BPs degradation efficiency. BESs can accelerate the decomposition of complex polymer structures through the activity of electroactive microorganisms, while also offering benefits such as energy recovery and real-time process monitoring. When coupled with anaerobic digestion, the BES-AS demonstrates significant synergistic effects, improving degradation efficiency and promoting the production of high-value-added products such as volatile fatty acids (VFAs) and biogas, thereby showing great application potential. This review outlines current research progress, identifies key knowledge gaps in mechanism elucidation, system design, source recovery, etc., and proposes future research directions. These include system optimization, microbial community engineering, development of advanced electrode materials, and omics-based mechanistic studies. Advancing multidisciplinary integration is expected to accelerate the practical application of BES-ASs in BP waste management and contribute to achieving the goals of sustainability, efficiency, and circular utilization.
- 27 October 2025
- Published by MDPI AG in Fermentation
- Vol. 11 (11) , 610
Open AccessHarnessing Bioelectrochemical and Anaerobic Systems for the Degradation of Bioplastics: Application Potential and Future Directions
As the environmental burden of traditional plastics continues to grow, bioplastics (BPs) have emerged as a promising alternative due to their renewable origins and potential for biodegradability. However, the most popular anaerobic systems (ASs)—anaerobic digestion (AD), acidogenic fermentation (AF), and enzyme hydrolysis (EH)—for BPs degradation still face many challenges, e.g., low degradation efficiency, process instability, etc. As a sustainable clean energy technology, bioelectrochemical systems (BESs) have demonstrated strong potential in the treatment of complex organic waste when integrated with ASs. Nevertheless, research on the synergistic degradation of BPs using BES-ASs remains relatively limited. This review systematically summarizes commonly used anaerobic degradation methods for BPs, along with their advantages and limitations, and highlights the BES-AS as an innovative strategy to enhance BPs degradation efficiency. BESs can accelerate the decomposition of complex polymer structures through the activity of electroactive microorganisms, while also offering benefits such as energy recovery and real-time process monitoring. When coupled with anaerobic digestion, the BES-AS demonstrates significant synergistic effects, improving degradation efficiency and promoting the production of high-value-added products such as volatile fatty acids (VFAs) and biogas, thereby showing great application potential. This review outlines current research progress, identifies key knowledge gaps in mechanism elucidation, system design, source recovery, etc., and proposes future research directions. These include system optimization, microbial community engineering, development of advanced electrode materials, and omics-based mechanistic studies. Advancing multidisciplinary integration is expected to accelerate the practical application of BES-ASs in BP waste management and contribute to achieving the goals of sustainability, efficiency, and circular utilization.
- 20 May 2025
- Published by Springer Nature
- p. 322-330
AI-Powered Automated Detection of Cervical Cancer Using Deep Learning Techniques: A CNN and Transfer Learning Approach
- 20 May 2025
- Published by Springer Nature
- p. 322-330
AI-Powered Automated Detection of Cervical Cancer Using Deep Learning Techniques: A CNN and Transfer Learning Approach
- Open Access
- 12 March 2024
- Published by MDPI AG in Fermentation
- Vol. 10 (3) , 162
Acidogenic Fermentation of Food Waste for the Production of Short-Chain Fatty Acids: The Impact of Inoculum Type and Inoculum Heat Pretreatment
Acidogenic fermentation is an emerging biotechnology that allows for the utilization of food waste as a feedstock to produce high-value products such as short-chain fatty acids (SCFAs), effectively offering a tangible solution for food waste management as well as resource recovery. The objectives of the current study were to identify the ideal inoculum, waste-activated sludge (WAS) or anaerobic digester sludge (AD), for the acidogenic fermentation of food waste at room temperature, as well as to evaluate the impact of heat pretreatment of these inoculums on fermentation performance. The maximum hydrolysis yield of 399 g sCOD/kg VS added was obtained when untreated AD was used as the inoculum, whereas the pretreated AD inoculum provided the highest SCFA yield and conversion efficiency of 238 g sCODSCFA/kg VS added and 71%, respectively. Heat pretreatment had a detrimental impact on the WAS inoculum, leading to lower hydrolysis and SCFA yields, but exerted a positive influence on the AD inoculum. The microbial community showed that heat pretreatment negatively impacted the abundance of non-spore-forming hydrolytic and acidogenic microorganisms. Overall, this study demonstrates the critical role of inoculum type and heat pretreatment in optimizing the acidogenic fermentation process, laying the groundwork for future refinements in SCFA production from food waste through inoculum design.
- 12 March 2024
- Published by MDPI AG in Fermentation
- Vol. 10 (3) , 162
Open AccessAcidogenic Fermentation of Food Waste for the Production of Short-Chain Fatty Acids: The Impact of Inoculum Type and Inoculum Heat Pretreatment
Acidogenic fermentation is an emerging biotechnology that allows for the utilization of food waste as a feedstock to produce high-value products such as short-chain fatty acids (SCFAs), effectively offering a tangible solution for food waste management as well as resource recovery. The objectives of the current study were to identify the ideal inoculum, waste-activated sludge (WAS) or anaerobic digester sludge (AD), for the acidogenic fermentation of food waste at room temperature, as well as to evaluate the impact of heat pretreatment of these inoculums on fermentation performance. The maximum hydrolysis yield of 399 g sCOD/kg VS added was obtained when untreated AD was used as the inoculum, whereas the pretreated AD inoculum provided the highest SCFA yield and conversion efficiency of 238 g sCODSCFA/kg VS added and 71%, respectively. Heat pretreatment had a detrimental impact on the WAS inoculum, leading to lower hydrolysis and SCFA yields, but exerted a positive influence on the AD inoculum. The microbial community showed that heat pretreatment negatively impacted the abundance of non-spore-forming hydrolytic and acidogenic microorganisms. Overall, this study demonstrates the critical role of inoculum type and heat pretreatment in optimizing the acidogenic fermentation process, laying the groundwork for future refinements in SCFA production from food waste through inoculum design.