CCCamilla Cioria

Camilla Cioria

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Camilla Cioria has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mercury and exo-Mercury interiors constrained by reduced meteorite analyses and thermodynamic modelling

    by Camilla Cioria, Giuseppe Mitri

    Mercury is the most chemically distinctive terrestrial planet in the Solar System. Its large metallic core, thin silicate shell, low-FeO surface composition, high sulfur content, and volatile-rich geochemistry are often discussed as separate anomalies (Cartier and Wood, 2019). Here, we test whether these properties are instead linked expressions of a single formation pathway: accretion and differentiation under highly reducing conditions. In this framework, Mercury is not an Earth-like planet with an unusually large core, but rather an end-member reduced planet and the Solar System benchmark for a broader class of rocky worlds, including possible exo-Mercuries.Because no confirmed Mercury meteorites are available, several reduced precursor materials have been proposed as Mercury analogues, including aubrites and ultramafic reduced achondrites such as diopsidites (e.g., Malavergne et al., 2010; Cartier and Wood, 2019; Anzures et al., 2020; Steenstra and van Westrenen, 2020). In this work, these differentiated reduced meteorites are used as analogues for plausible inner-disk building blocks. Their pyroxene-dominated mineralogy, minor sulfides, and lack of plagioclase provide a natural starting point for testing reduced mantle compositions. Nucleosynthetic systematics further link these reduced planetesimals to an inner-disk reservoir relevant to Mercury, while Mg isotope constraints indicate that ²⁶Al alone was insufficient to drive widespread melting. Instead, extensive differentiation likely required protracted growth, impact heating, and gravitational energy release during the assembly of Moon- to Mercury-scale bodies.After constraining the mineralogical and isotopic properties of these reduced precursor materials, and having shown through nucleosynthetic fingerprinting that they sample an inner-disk non-carbonaceous reservoir relevant to Mercury, we then used their bulk compositions as inputs for thermodynamic phase-equilibrium modelling. This step anchors the inferred interior mineralogy of Mercury to building blocks that plausibly formed in the innermost regions of the solar nebula, the likely accretion environment of the planet.Thermodynamic phase-equilibrium modelling with Perple_X (Connolly, 1990) shows that reduced Mercury-like bulk compositions do not produce Earth-like peridotitic mantles. Across the investigated CH-like, aubrite-like, and reduced enstatite-like compositions, orthopyroxene plus clinopyroxene exceed olivine, yielding FeO-poor, sulfur-bearing, pyroxene-rich mantle assemblages, consistent with recent experimental findings (Boujibar et al., 2025). This result is central because it affects the planet’s density structure, solidus, melt productivity, viscosity, and thermal evolution (Cioria et al., 2024). Applying terrestrial olivine-controlled rheology to Mercury therefore introduces first-order inconsistencies: Mercury’s mantle is likely governed by a different compositional and rheological regime. The same framework predicts that melts extracted from reduced, pyroxene-rich mantles crystallize into crustal cumulates ranging from noritic to gabbroic compositions. These crustal products are FeO-poor, Mg-rich, and dominated by pyroxene and plagioclase, rather than resembling typical terrestrial basaltic crust.Overall, this work supports a nebula-driven, selectively accreted reduced lineage for Mercury, in which the planet’s present-day structure reflects not only post-accretion differentiation, but also the geochemical nature of the materials from which it formed. In this framework, Mercury’s large core, FeO-poor silicate shell, sulfur-bearing mineralogy, and pyroxene-rich mantle are interpreted as inherited consequences of accretion from highly reduced inner-disk building blocks, rather than as features that must be produced exclusively by catastrophic mantle stripping (e.g., Benz et al., 1988). The predicted low-FeO, pyroxene-rich lithologies, systematic Mg/Si and Ca/Si domains, silica-rich components, and density contrasts provide testable targets for BepiColombo. More broadly, if comparable reducing environments existed in the inner regions of other planetary systems, the same meteorite-constrained thermodynamic workflow can be extended to rocky exoplanets that formed from similarly reduced reservoirs. In this sense, Mercury is not only an anomaly of the Solar System, but a local expression of a broader planetary outcome: rocky planet differentiation controlled by formation region, precursor chemistry, and redox state.Acknowledgments: G.M. and C.C. acknowledge support from the Italian Space Agency (2022-16-HH.1-2024).References: Anzures, B. A., Parman, S. W., Milliken, R. E., Namur, O., Cartier, C., & Wang, S. (2020). Effect of sulfur speciation on chemical and physical properties of very reduced mercurian melts. Geochimica et Cosmochimica Acta, 286, 1–18. https://doi.org/10.1016/j.gca.2020.07.024Benz, W., Slattery, W. L., & Cameron, A. G. W. (1988). Collisional stripping of Mercury's mantle. Icarus, 74(3), 516–528. doi: 10.1016/0019-1035(88)90118-2Boujibar, A., Righter, K., Fontaine, E., Collinet, M., Lambart, S., Nittler, L. R., & Pando, K. M. (2025). A Pyroxenite mantle on Mercury? Experimental insights from enstatite chondrite melting at pressures up to 5 GPa. Icarus, 437, 116602. doi: 10.1016/j.icarus.2025.116602Cartier, C., & Wood, B. J. (2019). The role of reducing conditions in building Mercury. Elements,15(1), 39-45.doi: 10.2138/gselements.15.1.39Cioria, C., Mitri, G., Connolly, J. A. D., Perrillat, J.-P., & Saracino, F. (2024). Mantle mineralogy of reduced sub-Earths exoplanets and exo-Mercuries. Journal of Geophysical Research: Planets, 129(7), e2023JE008234. doi: 10.1029/2023JE008234Connolly, J. A. D. (1990). Multivariable phase diagrams; an algorithm based on generalized thermodynamics. American Journal of Science, 290(6), 666–718. https://doi.org/10.2475/ajs.290.6.666Malavergne, V., Toplis, M....

  • Open Access

    Core-Mantle Evolution of a Reduced Mercury

    by Giuseppe Mitri, Camilla Cioria

    Mercury likely formed under highly reducing conditions. In such an environment, silicon behaves as a siderophile element and partitions into the metallic phase during differentiation, leading to the formation of an Fe–Si-rich core (Steenstra and Van Westrenen, 2020). At the same time, the silicate mantle is expected to differ substantially from the olivine-dominated mantles of Earth, Venus, and Mars. Experimental petrology and geochemical studies suggest that Mercury’s mantle may contain significant pyroxene-rich rock assemblages (Cioria et al., 2024; Boujibar et al., 2025), with major implications for mantle viscosity, heat transport, and the long-term thermal evolution and coupling of the mantle-core system.Here, we investigate the coupled thermal and structural evolution of a chemically reduced Mercury, focusing on the combined influence of an Fe-Si core, pyroxene-rich mantle rheology, radiogenic heat production, and present-day geodetic constraints. To this end, we developed a coupled mantle-core evolution model in which the thermal state of the planet is governed by the time evolution of the core-mantle boundary temperature through a global energy balance including mantle radiogenic heating, surface heat loss, core sensible heat, and the latent and gravitational energy released during inner-core crystallization. The mantle is modelled as a conductive or stagnant-lid convective shell depending on the convective regime, with heat transport controlled by a temperature-dependent, non-Newtonian rheology for an olivine-pyroxene assemblage.The core is modelled as an adiabatic Fe-Si alloy, with Fe–9Si adopted for the liquid outer core and Fe-3.8Si for the solid inner core, consistent with experimentally inferred silicon partitioning under reducing conditions (Edmund et al., 2022). At each timestep, the evolving core-mantle boundary temperature is used to reconstruct self-consistently the radial temperature, density, pressure, and gravity structure of the core. The equilibrium inner-core radius is determined from the intersection between the core adiabat and the Fe-Si melting curve, allowing the progressive crystallization history of the core to be tracked through time. The resulting internal density structure is then used to compute Mercury’s total mass, normalized polar moment of inertia, and forced longitudinal libration amplitude, enabling direct comparison with present-day geodetic observations.To identify physically plausible evolutionary histories, we explored the parameter space through a Monte Carlo analysis of coupled mantle-core evolution models. The investigated parameters include the thickness of the silicate shell, the pyroxene abundance within the mantle, the scaling of mantle radiogenic heating, perturbations to mantle and core densities, and uncertainties in the Fe-Si melting relation governing inner-core crystallization. Each realization was integrated over 4.6 Ga and evaluated against present-day geodetic observables, including Mercury’s mass, normalized polar moment of inertia, and forced longitudinal libration amplitude.Our simulations indicate that the developed coupled mantle–core evolution model can place quantitative constraints not only on the present-day internal structure of Mercury, including the thickness of the silicate shell and the size of the inner core, but also on the planet’s long-term thermal evolution. In particular, by combining coupled thermal evolution modelling with present-day geodetic constraints, the model provides insight into the timing of inner-core nucleation, the persistence of a long-lived liquid outer core, and the coupled thermochemical evolution of Mercury as a chemically reduced terrestrial planet. AcknowledgementsG.M. and C.C. acknowledge support from the Italian Space Agency (2022-16-HH.1-2024). ReferencesBoujibar, A., Righter, K., Fontaine, E., Collinet, M., Lambart, S., Nittler, L. R., & Pando, K. M. (2025). A Pyroxenite mantle on Mercury? Experimental insights from enstatite chondrite melting at pressures up to 5 GPa. Icarus, 116602.Cioria, C., Mitri, G., Connolly, J. A. D., Perrillat, J.-P., & Saracino, F. (2024). Mantle mineralogy of reduced sub‐Earths exoplanets and exo‐Mercuries. JGR:Planets, 129.Edmund, E., Morard, G., Baron, M. A., Rivoldini, A., Yokoo, S., Boccato, S., et al. (2022). The Fe‐FeSi phase diagram at Mercury’s core conditions. Nature Communications, 13(1), 387. https://doi.org/10.1038/s41467‐022‐27991‐9Steenstra, E. S., & van Westrenen, W. (2020). Geochemical constraints on core‐mantle differentiation in Mercury and the aubrite parent body. Icarus, 340, 113621.

  • Open Access

    Thermal modelling of Uranus’s icy satellites based on the mineralogical evolution of the deep interior

    by Artem Lebedev, Giuseppe Mitri, Camilla Cioria, Anastasia Consorzi

    IntroductionThe deep interiors of Uranus’s icy satellites may be composed of hydrated and dehydrated mineral layers. A previous study [1] described possible internal differentiation scenarios. In this study, we aim to better constrain their present-day internal structures by coupling a model of mineral assemblage evolution in the deep interior with a thermal evolution model.ModelWe developed a one-dimensional radial thermal evolution model coupled with a mineralogy model of the rocky interior, which also accounts for dehydration processes. The physical properties of the rocky layers are assumed to be at thermodynamic equilibrium. The model simulates thermal evolution from the satellites’ formation to the present day. Tidal heating is included by computing the tidal Love number k2 using the ALMA3 code [2].We performed thermodynamic modeling of the mineral assemblages forming the rocky core by using the PerpleX software [3], following the approach described in [4]. Orgueil (CI) chondrite was used as the precursor material for both hydrated and dehydrated mineral assemblages.ResultsHere, we present the results for the largest satellite of Uranus, Titania. Figure 1 shows its thermal evolution for the average and most probable scenario. Panel A illustrates the temperature evolution across different layers, while Panel B shows the corresponding density. The white line outlines the boundary between ocean, ice and rocky interior. The subsurface ocean reaches the maximum depth of 70 km before gradually cooling. We assumed an initial ammonia concentration of 1% in the hydrosphere. Our results indicate that ammonia inhibits ocean freezing, leading to a concentration up to 26%, with a residual ocean thickness of ~12 km. The maximum temperature in the deep interior peaks at T ≤ 1000 K around 1.8 Gyr. Titania undergoes a radial contraction of ~15 km at 1.2 Gyr, followed by a gradual expansion to ~2 km at the present day.Figure 1. Thermal evolution of Titania. Panel A shows the temperature profile over time, while Panel B illustrates the evolution of the density profile. The white line marks the boundary between ice shell, subsurface ocean and rocky interior. The density profile supports that Titania’s deep interior underwent complete dehydration, revealing the gradual formation of a density boundary at a radius of ~310 km around ~ 0.6 Gyr. The current deep interior consists of dehydrated minerals surrounded by hydrated silicate layers, with water content decreasing with depth.We used the Monte Carlo approach to explore different evolution scenarios by varying all relevant initial parameters according to their probability distributions. This method allows us to assess the influence of each parameter on the interior structure of Uranus’s satellites. Acknowledgements A.L., G.M. and C.C. acknowledge support from the Italian Space Agency (2024-5-HH.0). This abstract was produced while A.L. (CUP E66E24000200005) was attending the PhD program in PhD in Space Science and Technology at the University of Trento, Cycle XL, with the support of a scholarship financed by the Ministerial Decree no. 629 of 24th April 2024, based on the NRRP - funded by the European Union - NextGenerationEU - Mission 4 "Education and Research", Component 1 "Enhancement of the offer of educational services: from nurseries to universities” - In-vestment 4.1 “Extension of the number of research doctorates and innovative doctorates for public ad-ministration and cultural heritage”References[1] Castillo-Rogez J. et al. (2023) J.G.R. Planets, 128(1).[2] Melini, D., Saliby, C. and Spada, G. (2022) Geophysical Journal International.[3] Connolly, J. A. D. (1990). Am. J. Sc., 290(6), 666-718.[4] Cioria C. and Mitri G. (2022) Icarus, 388.

  • Open Access

    Exploring Pyroxene-Rich Planetary Mantles: Experimental Insights from CB Chondrites

    by Camilla Cioria, Jean-Philippe Perrillat, Giuseppe Mitri

    Under the reducing conditions of the inner region of stellar nebulae (Cartier and Wood, 2019), thermodynamic calculations have shown that rocky planetary mantles could be dominated by pyroxenes instead of olivine (Cioria et al., 2024). This mineralogical composition would have geodynamic implications such as low mantle viscosity and reduced solidus temperature compared to peridotitic mantles, as on Earth and Venus. In this preliminary work, we perform high pressure- temperature experiments in a Paris-Edinburgh press to investigate the subsolidus and melting phase relations of CB (Bencubbin like) bulk silicate composition at conditions corresponding to the crust- mantle interface and core-mantle boundary in Mercury. The objective is also to experimentally constrain and anchor the previous thermodynamic calculations of Cioria et al. (2024), focusing particularly on the mineral constituents of the crusts and mantles of reduced bodies.Synthetic samples (CB1, CB2) have been prepared using the average bulk silicate fraction of CB chondrites as proposed by Malavergne et al. (2010) and Brown and Elkins-Tanton (2008). Starting powders were prepared from high purity oxide mixtures, according to Cioria et al., 2024 Model 2, with 67.9 wt% SiO2, 0.2 wt% TiO2, 3.1 wt% Al2O3, 1.1 wt% Cr2O3, 0.3 wt% FeO, 0.1 wt% MnO, 25 wt% MgO, 2.6 wt% CaO, 0.1 wt% Na2O and 0.01 wt% K2O. Paris-Edinburgh press experiments were conducted in standard 10/3.5mm (sample CB1) and 7/2.4 mm (sample CB2) cell assemblies, using boron epoxy transmitting medium and graphite furnace heaters. Powders were loaded into a double capsule with a graphite inner wall and boron nitride outer wall. Samples were subjected to 2 GPa–1300K (CB1) and 5 GPa–1700K (CB2), for durations ranging from 3hours to 24 hours, respectively; in order to achieve equilibrium conditions. These P-T ranges are the same used in Cioria et al. (2024) as boundary conditions in thermodynamic modelling. Recovered charges were mounted, polished, and optical observations shown that run-products have coarse-grained texture, where large, euhedral crystals are embedded in a fine-grained matrix. The detailed analysis is under progress and scanning electron microscopy (SEM) are planned to characterize textures, phase assemblages, major element distributions, and constrain oxygen fugacity conditions - fO2 - using relevant phase equilibria buffers. Results will be compared with thermodynamic models (Cioria et al., 2024) and experimental studies by Berthet et al., (2009) and Boujibaar et al. (2025), to understand any differences between products derived from CB and EH compositions, respectively. Further works will involve synthesis under larger P-T conditions as well as investigating sulfur-bearing compositions under various oxygen fugacity conditions in order to assess the building materials and differentiation processes of Mercury-like planets and small bodies in the early solar system.AcknowledgmentsG.M. and C.C. acknowledge support from the Italian Space Agency (2022-16-HH.1-2024). References Berthet, S., Malavergne, V., & Righter, K. (2009). Melting of the Indarch meteorite (EH4 chondrite) at 1 GPa and variable oxygen fugacity: Implications for early planetary differentiation processes. GCA, 73(20), 6402-6420.Boujibar, A., Righter, K., Fontaine, E., Collinet, M., Lambart, S., Nittler, L. R., & Pando, K. M. (2025). A Pyroxenite mantle on Mercury? Experimental insights from enstatite chondrite melting at pressures up to 5 GPa. Icarus, 116602.Brown, S., & Elkins‐Tanton, L. T. (2009). Compositions of Mercury's earliest crust from magma ocean models. EPSL , 286(3-4), 446-455.Cartier, C., & Wood, B. J. (2019). The role of reducing conditions in building Mercury. Elements,15(1), 39-45.Cioria, C., Mitri, G., Connolly, J. A. D., Perrillat, J.-P., & Saracino, F. (2024). Mantle mineralogy of reduced sub‐Earths exoplanets and exo‐Mercuries. JGR:Planets, 129.Connolly, J. A. D. (1990). Multivariable phase diagrams; an algorithm based on generalized thermodynamics. Am. J. Sci., 290(6), 666- 718.Malavergne, V., Toplis, M. J., Berthet, S., & Jones, J. (2010). Highly reducing conditions during core formation on Mercury: Implications for internal structure and the origin of a magnetic field . Icarus, 206(1), 199–209.

  • Open Access

    Core and Mantle Evolution of a Reduced Mercury

    by Giuseppe Mitri, Camilla Cioria

    Mercury’s highly reducing formation environment has profoundly influenced its internal structure and long-term evolution, setting it apart from the other terrestrial planets. Unlike Earth, Venus, or Mars—characterized by olivine-rich mantles and sulfur-enriched metallic cores—Mercury likely possesses a silicon-enriched metallic core and a mantle rich in pyroxenes. These distinctive properties result from early planetary differentiation under extremely low oxygen fugacities, estimated to lie between 2.6 and 7.3 log units below the iron-wüstite (IW) buffer. Such conditions promote silicon partitioning into the core and stabilize pyroxene phases in the silicate mantle. The primary objective of this study is to investigate how mantle composition—through its control on viscosity—affects heat extraction from the deep interior and governs the timing and extent of inner core solidification.We developed a coupled numerical model that self-consistently simulates the thermal evolution of Mercury’s mantle and core. The mantle model solves conservation equations for mass, momentum, and energy in a two-dimensional Cartesian geometry using a finite-difference method. A non-Newtonian rheology based on dislocation creep is implemented, with flow laws derived from experimental data for dry peridotite and orthopyroxene (as a proxy for pyroxenitic material). We explored a wide parameter space of pyroxenite content (0–40 wt%) and mantle thickness (300–500 km). The core model, based on an Fe–Si alloy (9 wt% Si in the liquid, 3.8 wt% in the solid), follows an analytical formulation describing the core’s thermal, density, and phases’ stability evolution, including latent heat and gravitational energy release during inner core crystallization.Our results demonstrate that the rheological properties of a pyroxene-rich mantle play a critical role in Mercury’s interior evolution. Increased pyroxenite content reduces mantle viscosity, enabling vigorous and long-lasting convection. This enhances heat extraction from the core and favours the progressive growth of a solid inner core over geological timescales. Conversely, a more viscous, peridotite-dominated mantle suppresses convection earlier in planetary history.To evaluate the plausibility of the modelled scenarios, we compute the time evolution of Mercury’s normalized moment of inertia, constrained by MESSENGER gravity and rotation data. These data support the presence of a partially molten core, and a mantle mechanically decoupled from a solid inner core.These findings have implications for the origin and persistence of Mercury’s magnetic field. A long-lived outer liquid core may sustain dynamo activity. Moreover, the model-derived histories of radial contraction and internal temperature evolution are consistent with observed tectonic features.

  • Open Access

    Localized Lithospheric Deformation in Vinmara Planitia, Venus: Insights from Morphological and Geophysical Observations

    by Davide Sulcanese, Giuseppe Mitri, Camilla Cioria, Edoardo Santero Mormile, Mafalda Ianiri, Suzanne E. Smrekar, Scott Hensley

    The tectonic and volcanic evolution of Venus remains a fundamental open question in planetary science. The absence of a globally recognized system of mobile lithospheric plates, as seen on Earth, suggests that alternative geodynamic regimes must be considered to explain the planet’s surface features [1, 2, 3, 4, 5]. In this context, localized deformation and regional-scale tectonic activity offer useful frameworks for investigating how Venus may accommodate internal heat and lithospheric stresses.In this study, we present a geological and geomorphological analysis of two adjacent regions in Vinmara Planitia, based on Magellan radar and altimetric datasets [6]. These areas exhibit contrasting structural and topographic patterns, including arcuate ridge belts, extensional fault systems, organized and diffuse volcanism, and broad elevation gradients. Detailed mapping and morphometric analyses reveal features suggestive of significant lithospheric deformation, including broad elevation variations and fault systems that suggest lithospheric deformation, which are reminiscent of processes typically associated with convergent and extensional tectonic settings on Earth.Additionally, we integrate gravity and radio thermal emissivity data from the Magellan mission to investigate subsurface structure and potential thermal variations. The gravity anomalies suggest density heterogeneities beneath key tectonic structures, while emissivity trends may indicate compositional differences or varying degrees of surface alteration. These observations, although limited by spatial resolution, provide supportive context for the tectonic interpretations derived from surface morphology.The spatial configuration and inferred relative motion between these regions suggest a dynamic interaction among these areas, potentially driven by a combination of surface deformation and deeper lithospheric or mantle contributions. Rather than invoking a globally coherent tectonic framework, our findings support the idea that Venus may experience localized, possibly transient, episodes of lithospheric mobility. This is consistent with recent models proposing a fragmented or partially mobile lithosphere, where short-lived deformation zones can emerge in response to regional stresses or mantle-driven processes [5, 7].While further data are necessary to fully characterize the nature and evolution of these structures, our analysis highlights the potential for active or recent deformation in the Venusian lowlands. Future orbital missions with higher resolution topography, gravity, and spectral imaging will be critical for testing the hypothesis of spatially confined lithospheric activity and for refining our understanding of how planets like Venus manage internal heat in the absence of a global pattern of plate tectonics [8, 9]. Acknowledgements:D.S and G.M. acknowledge support from the Italian Space Agency (Grant No. 2022-15-HH.0).Bibliography[1] Solomatov, V. S. & Moresi, L. N. Stagnant lid convection on Venus. Geophys. Res. Planets 101, 4737-4753 (1996).[2] Lenardic, A. The diversity of tectonic modes and thoughts about transitions between them. Trans. R. Soc. A 376, 20170416 (2018).[3] Solomatov, V. S. & Moresi, L. N. Three regimes of mantle convection with non-Newtonian viscosity and stagnant lid convection on the terrestrial planets. Res. Lett. 24, 1907-1910 (1997).[4] Moresi, L. & Solomatov, V. Mantle convection with a brittle lithosphere: Thoughts on the global tectonic styles of the Earth and Venus. J. Int. 133, 669-682 (1998).[5] Lourenço, D. L., Rozel, A. B., Ballmer, M. D. & Tackley, P. J. Plutonic-squishy lid: A new global tectonic regime generated by intrusive magmatism on Earth-like planets. Geophys. Geosyst. 21, e2019GC008756 (2020).[6] Ford, J. P. Guide to Magellan Image Interpretation (NASA, 1993).[7] Byrne, P. K. et al. A globally fragmented and mobile lithosphere on Venus. Natl Acad. Sci. USA 118, e2025919118 (2021).[8] Smrekar, S. et al. VERITAS (Venus emissivity, radio science, InSAR, topography, and spectroscopy): A discovery mission. IEEE Aerosp. Conf. 1-20 (2022).[9] EnVision Definition Study Report (2023) ESASCI-DIR-RP-003


  • Open Access

    Strike-slip tectonics as a precursor to crustal spreading in Anshar Sulcus, Ganymede: Implications for grooved terrain formation

    by Mafalda Ianiri, Giuseppe Mitri, Davide Sulcanese, Gianluca Chiarolanza, Camilla Cioria

    Introduction The formation of grooved terrains on the icy surface of Ganymede is still debated and it could involve extensive rifting [1, 2] or spreading [3], strike-slip tectonics [4, 5], and minor cryovolcanic resurfacing [6]. To investigate the origin and evolution of the grooved terrains, we performed a geomorphological and structural analysis of Anshar Sulcus, a grooved terrain located in the anti-Jovian hemisphere within the dark terrain of Marius Regio. In addition, we conducted a topographical analysis producing a Digital Elevation Model (DEM) of this region. We selected Anshar Sulcus because it is a terminal portion of a grooved system, and it was imaged at high resolution by the Galileo SSI. These two aspects helped us to perform a palinspastic reconstruction of the area surrounding the sulcus and, consequently, a reconstruction of the different stages of formation of this sulcus. Methods The geological map was produced based on SSI Galileo images having a spatial resolution of about 152 m/px, at 1:500000 scale, using the differences in tones, textures and patterns and DEM. To import these images to the Geographic Information System (GIS), we calibrated, filtered and geo-referenced them through the Integrated Software for Imagers and Spectrometers (ISIS4) [7]. The DEM was produced using the “shape-from-shading” tool (SfS) provided by the NASA Ames Stereo Pipeline tool suite [8], maintaining the same spatial resolution as the images. Results Our geological map (Fig. 1) shows that most of the study area is covered by the dark cratered unit (dc) and consists of a heavily cratered surface with several patches of hummocky material and a pervasive fracturing that we have divided into three main sets. The light grooved unit (lg) consists of a prominent lane that crosscuts the dc characterized by sets of sub-parallel linear grooves. Additionally, topographic profiles traced perpendicular to the sulcus, revealed that the elevation of the grooved terrain increases towards its central part. From a morphological observation, we identified well preserved rims of cut craters and fractures along the boundary between the lg and dc. These structures interrupt at the boundary with lg, and this allowed us to reconstruct the possible original position of these structures before the formation of the light unit. Starting from the westernmost crater along the northern boundary of the dc region (Fig. 2a, 2b), we observed morphological coherence and continuity between the fractures within the crater and the set of fractures in the southern region (set a), suggesting a right lateral displacement of about 15 km. Proceeding to east along the boundaries of the two dc regions, we noted the occurrence of two rims of a possible crater (Fig. 2c, 2d) characterized by a lateral displacement of about 13 km. Moreover, in support of morphological evidence, the topographic profiles traced within the analysed structures show a consistency between the elevations of their southern and northern portions (Figs. 3 and 4). Discussion Through a combination of structural and topographic analyses, we have found evidence that the formation of Anshar Sulcus grooved terrain was a result of spreading and upwelling of new material. This is supported by the presence of well-preserved structures along the boundaries between dc and lg, and by the higher topographic elevation at the centre of the sulcus, which rules out the possibility of rifting as the cause of its formation. Our reconstruction shows that the first tectonic event was a right-lateral movement in the NW-SE direction (Fig. 5b) that divided the dark terrain of Marius Regio into two distinct regions with conservative margins. The second tectonic stage (Fig. 5c) presents the beginning of the spreading event that caused the separation of the two regions previously formed as consequence of the strike-slip event, corresponding to the formation of light grooved unit. The right lateral strike-slip tectonics continued during the spreading stage, so the separation of the two regions occurred with a transtensional movement toward a WSW- ENE direction. Furthermore, we have compiled a chronostratigraphic chart (Fig. 6) that identifies three stratigraphic phases for the formation of Anshar Sulcus and surrounding area. The first phase is characterized by the formation of the dark unit due to contamination of the icy shell by impactors. The second phase is characterized by the formation of the three sets of fractures and by the start of the strike-slip event that produced the division of the dark terrain of Marius Regio. Finally, the third phase is characterized by the formation of the lg unit through crustal spreading. The formation of the grooves inside the light unit occurred relatively quickly, due to the brittle faulting and tilting of the new crust during the extension event that have formed the light unit, explaining the absence of deformed or displaced craters inside the sulcus. Conclusions Our analysis reveals a two-stage tectonic genesis of Anshar Sulcus, with a first strike-slip stage dividing the dark terrain of Marius Regio into two distinct regions, and a second stage characterized by the formation of the grooved terrain of Anshar Sulcus through crustal spreading and upwelling of new, uncontaminated material, with the simultaneous formation of grooves within it due to brittle fracturing. Acknowledgements M.I. and G.M. acknowledge support from the Italian Space Agency (2023-6- HH.0). References [1] Collins et al. (1998b) Icarus, 135, 345–359. [2] Prockter et al. (2002) J. Geophys. Res.: Planet. 105, 22519-22540. [3] Pizzi et al. (2017) Icarus, 288, 148-159. [4] Pappalardo et al. (1998) Icarus, 135, 276-302. [5] Cameron et al. (2018) Icarus, 315, 92-114. [6] Showman et al. (2004) Icarus, 172, 625-640. [7] Houck and Denicola (2000) ADASS IX, 216, 591. [8] Beyer et al. (2018) Earth and Space Sci. 5(9), 537–548.

  • Open Access

    Mineralogy of the mantles in sub- Earths and exo- Mercuries

    by Camilla Cioria, Giuseppe Mitri, James Alexander Denis Connolly, Jean-Philippe Perrillat, Fabrizio Saracino

    The mantle mineralogy of large exoplanets (e.g. super- Earths, planetary bodies having masses between 1-10 ME) has been widely investigated (Duffy et al., 2015).However, the minerals constituting the mantle of Mercury-sized objects (here referred to as exo-Mercuries) and sub-Earths (planetary bodies having masses ranging from 1 MM < 1ME, respectively 1 Mercury-mass and 1 Earth-mass), orbiting closer to their stars, are still underexplored. This modeling work has focused on describing stable mineral associations in those mantles equilibrated under low values of oxygen fugacity (fO2). Such reducing conditions are not uncommon in stellar systems, as evidenced by various materials in the solar system, ranging from undifferentiated ones (carbonaceous chondrites belonging to the CH and CB groups) to enstatite chondrites, to already differentiated materials like aubrites, and even entire planets like Mercury.Assuming Mercury as a proxy, we employed the open-source software Perple_X (Connolly, 1990) to characterize the mineral assemblages forming the mantle of these reduced planetary bodies.The thermodynamic approach here adopted offers the advantage of allowing the investigation of those planetary interiors otherwise not explorable. Moreover, the employed thermodynamic inputs were extrapolated from known precursor materials, which share several properties with exoplanets under examination. This methodology has already been discussed in literature (Néri et al., 2020; Cioria and Mitri, 2022), ensuring the validity of this approach. Bulk silicate compositions of aubrite and CH, CB, EN chondrites, have been used as thermodynamic inputs in our simulations. Calculations were conducted within the pressure and temperature ranges suggested for the mantle of Mercury: 1200 K -1700 K and 3 GPa -5 GPa (Tosi et al., 2013). We found that orthopyroxene, clinopyroxene, olivine, and accessory minerals constitute the mantles of Mercury and reduced exoplanets. These results indicate that the initial bulk compositions have a first-order constraint on the resulting mantle mineralogy; more specifically, the initial abundance of SiO2 determines the chemical equilibrium shift between pyroxene and olivine, respectively constituting the dominant phases at high and low silica content. The predicted mantle mineralogy, dominated by pyroxenes, is consistent with that outlined by Putirka and Rarick, (2019) and Putirka and Xu, (2021).The differences with Earth’s mantle mineralogy are significant, necessitating a new and more appropriate classification of these rocks, as already suggested in Putirka and Rarick, (2019).This outcome holds significant implications for the thermochemical evolution and geodynamics of reduced mantles, also exerting a substantial influence on the properties of the related crusts and cores.Future investigations on Mercury, conducted by the ESA BepiColombo mission, could shed new light on the possible mineralogy of its mantle, helping to further detail the minerals stable in those exoplanets formed in similar geochemical contexts.AcknowledgmentsG.M. and C.C. acknowledge support from the Italian Space Agency (2017-40-H.1-2020).References Cioria, C., & Mitri, G. (2022). Model of the mineralogy of the deep interior of Triton. Icarus, 388, 115234.Connolly, J. A. D. (1990). Multivariable phase diagrams; an algorithm based on generalized thermodynamics. American Journal of Science, 290(6), 666- 718. https://doi.org/10.2475/ajs.290.6.6661315Duffy, T., Madhusudhan, N., and Lee, K.K.M. (2015) Mineralogy of super-Earth planets. Treatise on Geophysics, 2nd Ed., 2, 149-178.1333Néri, A., Guyot, F., Reynard, B., & Sotin, C. (2020). A carbonaceous chondrite and cometary origin for icy moons of Jupiter and Saturn. Earth and Planetary Science Letters, 530, 115920.Putirka, K. D., & Rarick, J. C. (2019). The composition and mineralogy of rocky exoplanets: A survey of > 4000 stars from the Hypatia Catalog. American Mineralogist: Journal of Earth and Planetary Materials, 104(6), 817-829. https://doi.org/10.2138/am-2019-67871593Putirka, K. D., & Xu, S. (2021). Polluted white dwarfs reveal exotic mantle rock types on exoplanets in our solar neighborhood. Nature Communications, 12(1), 6168.1595Tosi, N., Grott, M., Plesa, A. C., & Breuer, D. (2013). Thermochemical evolution of Mercury's interior. Journal of Geophysical Research: Planets, 118(12), 2474-2487. https://doi.org/10.1002/jgre.201681688

  • Mantle Mineralogy of Reduced Sub‐Earths Exoplanets and Exo‐Mercuries

    by Camilla Cioria, Giuseppe Mitri, James Alexander Denis Connolly, Jean‐Philippe Perrillat, Fabrizio Saracino

    The mineralogy of planetary mantles formed under reducing conditions, as documented in the inner regions of the solar system, is not well constrained. We present thermodynamic models of mineral assemblages that would constitute the mantles of exo‐Mercuries. We investigated reduced materials such as enstatite chondrites, CH, and CB chondrites, and aubrites, as precursor bulk compositions in phase equilibrium modeling. The resulting isochemical phase diagram sections indicate that dominant phases in these reduced mantles would be pyroxenes rather than olivine, contrasting with the olivine‐rich mantles found within Earth, Mars, and Venus. The pyroxene abundances in the modeled mantles assemblages depend on the silica content shown by precursor materials. The silica abundance in the mantle is closely related to Si abundance in the core, particularly in reduced environments. In addition, we propose that pyroxene‐rich mantles exhibit more vigorous convective and tectonic activity than olivine‐rich mantles, given that pyroxene‐rich mantles would have lower viscosity and a lower solidus temperature ( Ts ).


  • Open Access

    Geomorphological analysis with digital elevation model of Monad Regio, Triton

    by Camilla Cioria, Davide Sulcanese, Gianluca Chiarolanza, Giuseppe Mitri

    Triton is one of the few satellites in the Solar System which shows an ongoing geological activity, with plumes and geysers whose origin is still controversial [1]. Its surface is relatively young, as shown by the paucity of craters detected on its surface [2]. Our knowledge of this moon comes from the Voyager 2 mission, which obtained several images, covering about 40% of Triton’s surface [3]. However, few studies were focused principally on surficial geomorphology, and those are mostly limited to the cantaloupe region and surrounding areas. Triton’s crust is composed predominantly by solid nitrogen (N2) but several other ices have been detected [3]. Crater counting has revealed that the surface is very young and likely it went through a resurfacing process in the past. In fact, a very small number of craters has been detected, and these usually exhibit a typical bowl-like shape [2]. Geological features on Triton include regions, called terrains, such as cantaloupe terrains or plains, which show different textures. Usually, plains are categorized within smooth, walled and terraced plains [3]. The latter are the flattest areas on Triton, a characteristic which has been explained by evoking a lava-like or other viscous liquid infill. Their central depressions also present a cluster of irregular pits, which have been interpreted as drainage pits or eruptive vents [3]. These peculiar morphologies seem to indicate the presence of a viscous fluid on the surface in a remote epoch, which may imply potential climatic and atmospheric changes during Triton’s geological history. In this work we analyse an area located at NW of Tuonela Planitia, which shows several depressions rimmed by sharp margins. Two of these depressions are named Kulilu Cavus and Mah Cavus [4]. Cavi are elliptical-shaped depressions, distributed in an ordered trend, which constitute the cantaloupe terrain [3]. Diapirism is the main candidate process to explain these collapsed depressions [3] but other hypotheses, such as cryovolcanism or impact cratering [5], have also been proposed.MethodologyA new geological map has been realized. We used Voyager 2 imagery named c1139533 [6] (600 m/px), properly calibrated, filtered and georeferenced using the Integrated Software for Imagers and Spectrometers (ISIS4) [7]. We mapped the different geological units and main features according to differences in surface morphology (fig.1). We also produced a DEM of the study area, using the open-source suite of tools NASA Ames Stereo Pipeline (ASP) [8]. We applied the photoclinometry-based “shape-from-shading” (SfS) tool to produce the DEM. Since SfS needs an input DEM generated preferably with stereo images, and we do not have such data for Triton, we used the methodology proposed by Lesage et al. 2021[9]. We analysed four different cross sections to measure the relative height of Kulilu Cavus, Mah Cavus and two other depressions, as well as their associated terraces (fig.2).DiscussionGeological map in fig.1 comprises four units: terraced terrain (tt), smooth plain (sp), outer basin (ob), inner basin (ib). Terraced terrain covers most of the studied area. It shows a chaotic pattern characterized by a non-linear distribution of elevations (fig.3). Several terraces have been spotted, some of which lay in a parallel arrangement around some of the basins. In cross section plots (fig.3) we observed two different trends in the progressive elevation of terraces, as they approach the basins. Particularly, in sections A-A’ and C-C’ we identified a decrease in the terraces’ height towards the corresponding basin, instead in B-B’ and D-D’ we found an increase of height. In the E part of the study area, the terraced terrain ends abruptly with a sharp-edged scarp, passing to the smooth plain unit (sp). By analysing DEM topography, we observed that sp unit lays 250 m below tt unit. The latter surrounds Tuonela Planitia, one of the four main walled plains identified on Triton. The terraced terrain hosts several large basins, with areas ranging from 1300 to 2050 km2. The degree of alteration among these basins is variable, with the features inferred to be more recent showing an inner minor basin within the main basin. The most altered basins appear smoother, featureless and shallower. Cross sections plots (fig.3) show that the depths of these basins range from 300 to 500 m. Finally, we can argue a tectonic control of this area, represented in the NW part of the terraced terrains by several lineations included in a wider ridge (outside the study area), which is part of the global tectonic grid on Triton.ConclusionsSizes and excavation depths of the observed basin features appear to be relatively homogeneous, which leads us to exclude an impact related origin. Instead, we argue that the origin of these depressions is linked to processes analogue to those described, in the formation of terrestrial maar craters [10] and possible explosion craters discussed on Titan [11]. Alternatively, diapirism may also explain the origin of such features. Further analysis could help to understand the nature and related processes that originated these basins.AcknowledgementsG.M., C.C., D.S., acknowledge support from the Italian Space Agency (2020-13-HH.0).References: [1] Hansen C.J., and Kirk R. (2015), 46th LPSC, 2423.[2] Schenk P.M., and Zahnle K. (2007), Icarus, Vol.192(1), 135-149.[3] McKinnon B. M. and Kirk R.L. (2014), Chapter 40, Triton, Encyclopedia of the Solar System, Third edition, Elsevier,861-881.[4] USGS Astrogeology Science Center: Triton Pictorial Map of the Slidr Linea Quadrangle (Nt-2), 1992.[5] Martin-Herrero A. et al. (2014), 45th LPSC, 1177.[6] Smith, B. A., et al. (1989), Science, Vol.246 (4936), 1422-1449.[7] Houck J.C. and DeNicola L.A. (2000) Astronomical Data Analysis Software and Systems IX, ASP Conference Series, Vol. 216.[8] Beyer, R. A. et al. (2018), Science, 5.[9] Lesage E. et al....