Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Claire Abadie has a total of 154 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Designing Sub-10 nm Non-Coherent Nanocrystal-Based LED Using Dielectric Cavity

    by Jiho Roh, Jisoo Oh, Clément Gureghian, Diogo Almeida, Albin Colle, Dario Mastrippolito, Marco Paye, Mariarosa Cavallo, Xiang Zhen Xu, Claire Abadie, et al.

  • Détecteurs et lasers THz à base d'antennes accordables en fréquence

    by Claire Abadie

    Les dispositifs optoélectroniques sont importants pour nombreuses applications de la vie de tous les jours : ordinateurs, téléphones, les objets connectés en général. La gamme spectrale du THz (0.1-10 THz) reste cependant un domaine industriellement peu exploité en raison de problèmes intrinsèques à la génération et détection des photons THz.De nombreuses applications relèvent pourtant du THz, dans les domaines médicaux par exemple, pour la détection des gaz à l’état de trace, ou bien pour l’imagerie d’objets opaques dans le visible.Cette thèse se focalise sur les photodétecteurs à puits quantiques (QWIPs) et les lasers à cascade quantique (QCLs) fonctionnant dans la gamme du THz dans le but de développer des dispositifs compacts, rapides et sensibles (mais fonctionnant à températures cryogéniques). Nous avons utilisé des résonateurs à anneau fendu, inspirés des travaux sur les métamatériaux, pour concevoir et développer des détecteurs sub-longueur d’onde accordables en fréquence dans la gamme spectrale du térahertz grâce à une inductance externe. En ce qui concerne les émetteurs, cette thèse étudie les micro-lasers THz qui utilisent des résonateurs de type microdisques, avec pour but de concevoir et fabriquer des lasers fonctionnant sur le mode électromagnétique fondamental. Les futures perspectives de ce travail concernent la réalisation d’un laser entièrement sub-longueur d’onde et rapide dans la gamme spectrale du THz.

  • Open Access

    Infrared Nanocrystals for Space Application: Hardness to Irradiations

    by Alexandre Neyret, Dario Mastrippolito, Bingbing Xia, Adrien Khalili, Maxime Lebreton, Giorgia Strobbia, Albin Colle, Marco Paye, Mariarosa Cavallo, Erwan Bossavit, et al.

    Colloidal nanomaterials are now a cost‐effective strategy for the design of infrared imagers. Their increased maturity brings them to the point where the evaluation of their potential for space and astronomy applications becomes relevant. The first step is to test their robustness against irradiation, since this process is responsible for the performance degradation of most imagers. In this study, we explore the potential of HgTe nanocrystals for short‐wave infrared sensing under X‐ray and He + ion irradiation. To first assess the degradation of the material itself, we test the evolution of a single‐pixel photoconductive device upon irradiation and observe that only marginal degradation occurs for doses relevant to space applications, and degradation only occurs at a very high threshold, making this colloidal semiconductor quite promising to operate in harsh radiation environments. Complementary spectroscopic studies reveal very different degradation mechanisms upon X‐ray (leading to oxidation) and He + ion (sintering particles). We tested the potential of this material in a focal plane array and observed degradation, though not preventing imaging, in a range of doses where no effect was observed for the simple photoconductive device. This suggests that the CMOS readout circuit might be the bottleneck regarding operation under radiation.


  • Inverted Thickness Dependence of Thermal Transport in Nanocrystal Supercrystals Down to the Monolayer

    by Matias Feldman, Juan J. Barrios‐Capuchino, Hervé Cruguel, Sébastien Royer, Claire Abadie, Danièle Fournier, Emmanuel Lhuillier, Jose Ordonez‐Miranda, Emmanuelle Lacaze, Florian Schulz, et al.

    Understanding the thermal properties of nanocrystal solids is important for their implementation. However, probing the intrinsic properties of monolayer to few‐layer supercrystals where non‐diffusive effects can emerge has remained elusive. Here, spatiotemporally resolved thermoreflectance microscopy and correlative atomic force microscopy are used to locally access lateral thermal transport in gold nanocrystal supercrystals with long polymer ligands from the monolayer up to eight layers. In contrast to the thermal size effect of typical thin film materials, it is demonstrated that above a few supercrystal layers the thermal diffusivity is nearly constant with increasing thickness. Notably, the mono‐to‐few layer range moreover experiences an inverted thickness dependence wherein the lateral thermal diffusivity increases when approaching the monolayer to a value 30–60% larger than the bulk. Simulations of quasi‐ballistic thermal transport successfully model the experimental trend, indicating the need to account for the phonon mean free path in the ligand matrix and the geometry of scattering interfaces. Phonons responsible for heat transport within the nanocrystalline composite have mean free paths shorter than the thickness of single supercrystal layers. This leads to behavior distinct from typical thickness‐dependent phonon–boundary scattering. These unusual behaviors present important considerations and opportunities for thermal management in applications of nanocrystal solids.


  • Genetic algorithm driven optimization of a guided mode resonator coupled to an infrared nanocrystal film

    by Claire Abadie, Nicolas Ledos, Ye Mou, Mariarosa Cavallo, Erwan Bossavit, Huichen Zhang, Albin Colle, Tommaso Gemo, Adrien Khalili, Yoann Prado, et al.

    Nanocrystal (NC)-based devices suffer from a trade-off between absorption, pushing for thicker films, and charge conduction that is only efficient over a few NC sizes. Therefore, the design of detectors based on NCs strongly benefits from the introduction of optical resonators that engineer the light–matter coupling. Traditionally, the design of such a cavity relies on analytic scaling rules. However, the design becomes far more complex when multiple resonances are targeted, requiring alternative design strategies. In this study, we explore how infrared nanocrystals can be coupled to a guided mode resonator to achieve a broadband enhancement of absorption. A genetic algorithm is used to systematically investigate how geometric factors can be tuned to increase the absorption × bandwidth product. In comparison to the pristine film, a significant increase in absorption was demonstrated across the targeted spectral range (1–2.5 μm). The detector based on the design metasurface exhibited high detectivity (2 × 1010 Jones @ 200 K) and fast time response (18 ns).


  • Open Access

    Advancing the Coupling of III–V Quantum Dots to Photonic Structures to Shape Their Emission Diagram

    by Erwan Bossavit, Oleksandra Yeromina, Dario Mastrippolito, Mariarosa Cavallo, Huichen Zhang, Tommaso Gemo, Albin Colle, Adrien Khalili, Andrei Shcherbakov, Lam Do Nguyen, et al.

    The development of optoelectronic devices based on III–V semiconductor colloidal quantum dots (CQDs) is highly sought after due to their reduced toxicity. While devices based on conventional CQDs (II–VI semiconductors, halide perovskites) have achieved impressive technological leaps since their discovery, the most mature of these compounds contain toxic heavy metal elements (Cd, Hg, or Pb), which are highly undesirable for safe industrial scale applications. The strong covalent bonds of III–V compounds like InP, InAs, or InSb prevent the release of their toxic atoms, making them safer. However, these same bonds create severe material constraints. Namely, their harsher reaction conditions and increased sensitivity to oxidation have kept most of the research focused on material development. Meanwhile, their integration into devices and their coupling to photonic structures lag behind. Here, the integration of InAs/ZnSe core‐shell CQDs is advanced. First, the material parameters necessary to design plasmonic gratings coupled to the CQDs are elucidated and those gratings are fabricated. Angle‐resolved spectroscopy shows that the plasmon modes successfully couple to the CQD layer's emission leading to a tunable directivity with a 15° linewidth. A 3‐fold increase of the PL signal is achieved at normal incidence, thus advancing toward the goal of efficient outcoupling in LEDs.


  • Designing Rules for an Efficient Metallic Mid-Infrared Transparent Electrode Dedicated to Nanocrystal-Based Devices

    by Tung Huu Dang, Mariarosa Cavallo, Adrien Khalili, Erwan Bossavit, Huichen Zhang, Yoann Prado, Claire Abadie, Erwan Dandeu, Sandrine Ithurria, Grégory Vincent, et al.


  • Multiresonant Grating to Replace Transparent Conductive Oxide Electrode for Bias Selected Filtering of Infrared Photoresponse

    by Tung Huu Dang, Mariarosa Cavallo, Adrien Khalili, Corentin Dabard, Erwan Bossavit, Huichen Zhang, Nicolas Ledos, Yoann Prado, Xavier Lafosse, Claire Abadie, et al.

    Optoelectronic devices rely on conductive layers as electrodes, but they usually introduce optical losses that are detrimental to the device performances. While the use of transparent conductive oxides is established in the visible region, these materials show high losses at longer wavelengths. Here, we demonstrate a photodiode based on a metallic grating acting as an electrode. The grating generates a multiresonant photonic structure over the diode stack and allows strong broadband absorption. The obtained device achieves the highest performances reported so far for a midwave infrared nanocrystal-based detector, with external quantum efficiency above 90%, detectivity of 7 × 1011 Jones at 80 K at 5 μm, and a sub-100 ns time response. Furthermore, we demonstrate that combining different gratings with a single diode stack can generate a bias reconfigurable response and develop new functionalities such as band rejection.


  • Open Access

    Plasmon‐Assisted Directional Infrared Photoluminescence of HgTe Nanocrystals

    by Erwan Bossavit, Tung Huu Dang, Puyuan He, Mariarosa Cavallo, Adrien Khalili, Corentin Dabard, Huichen Zhang, Djamal Gacemi, Mathieu G. Silly, Claire Abadie, et al.

    HgTe nanocrystals offer a unique spectral tunability with both absorption and emission covering the near and mid‐infrared as well as the THz window. Nevertheless, a very limited amount of work is dedicated to electroluminescence from this material. An efficient diode not only requires designing a structure that achieves a high electrical efficiency (i.e., efficient electron and hole injections), but also finding a way to efficiently extract the emitted photons. The shift from visible to infrared certainly demands revisiting the strategies proposed for shorter wavelengths (microlens arrays). Here, a metallic grating is used to enhance the photoluminscence signal up to a factor of 4 while enabling directionality in the emission, which is driven by the grating period.


  • Modeling HgTe Complex Optical Index from Bulk to Nanocrystal Layers

    by Bilal Chehaibou, Claire Abadie, Yoann Prado, Xiang Zhen Xu, Grégory Vincent, Bruno Gallas, Gabriel Mugny, Arthur Arnaud, Emmanuel Lhuillier, Christophe Delerue