SFSimone Di Fede

Simone Di Fede

*This is an algorithmically generated author record based on publicly available information.

Simone Di Fede has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Plume backflow in gridded ion thrusters

    by Federico Cescon, Simone Di Fede, Marco Manente, Daniele Pavarin, Mirko Magarotto

    A numerical study of the plume dynamics of a gridded ion thruster (GIT) and the interaction with a medium sized spacecraft (S/C) equipped with solar arrays (SAs) is presented. Simulations were performed with ProPIC, a three-dimensional (3D) particle-in-cell Monte-Carlo collisions code developed to model plasma dynamics in the plume of electric thrusters. In order to verify the validity of the study, the code has been validated against independent numerical and experimental data of existing GIT systems, the RIT10-EVO and the UK-10 thrusters. The comparison was performed in terms of ion density and electron temperature, yielding results within the uncertainty bars of the measurements. The plume backflow on the S/C body and SA was determined in terms of surface charging and erosion, employing a semi-empirical sputter yield model. In the configuration studied, where the RIT10-EVO is employed and the geometry is non-axisymmetric, the satellite assemble floats to a negative potential of − 27.5 V with respect to the infinite. On the S/C body and SA the maximum erosion depth is found to be 32400 nm and 500 nm respectively. Slow ions, mainly charge-exchange, and momentum-exchange ions emerge in the present simulations as the dominant populations contributing to non negligible effects on the S/C body and SA. Ionizations and excitations also play an important role in affecting the floating potential of the satellite. Simulating with a 3D approach and a thorough treatment of collisions is therefore essential to capture these key physical phenomena. To the authors’ knowledge, this is the first 3D fully kinetic plume backflow analysis of a GIT evaluating a realistic satellite geometry, with a comprehensive set of collision operators.

  • Ionospheric plasma drag on small satellites in low-earth orbit

    by Simone Di Fede, Anusha Banninthaya, Zilin Huang, Yuan Hu, Basman Elhadidi, Mirko Magarotto, Wai Lee Chan


  • Satellite surface charging in LEO with ProPIC

    by Simone Di Fede, Basman Elhadidi, Mirko Magarotto, Wai Lee Chan


  • Open Access

    Corrigendum to “Coupled global and PIC modelling of the REGULUS cathode-less plasma thrusters operating on xenon, iodine and krypton” [Acta Astronaut. 207 (2023) 227–239]

    by Shaun Andrews, Raoul Andriulli, Nabil Souhair, Simone Di Fede, Daniele Pavarin, Fabrizio Ponti, Mirko Magarotto

  • Open Access

    Magnetic nozzle performance in a cluster of helicon plasma thrusters

    by Simone Di Fede, Marco Manente, Paolo João Comunian, Mirko Magarotto

    A numerical study of the plasma dynamics in a Helicon Plasma Thrusters’ (HPT) cluster is presented. For the first time in the literature, the three-dimensional (3D) plasma dynamics occurring in the plume of a HPTs’ cluster is analyzed. The physical investigation relies on ProPic, a 3D particle-in-cell (PIC) code specifically designed to simulate the plasma dynamics in magnetic nozzles and in a non-axi-symmetric domain. The code has been validated against experiments reported in the literature and cross-validated with Starfish, an open-source two-dimensional PIC software. The physical investigation has revealed an interesting mutual influence between the thrusters that constitute the cluster. Three significant phenomena that affect the cluster’s performance have been identified. The first phenomenon is related to the effect that clustering has on the shape of the magnetic field lines and, in turn, on the divergence angle of the plume. The second phenomenon is related to electron currents flowing among different thrusters, which affect the potential drop across the plume. The third phenomenon is related to the effect that neighboring thrusters have on the plasma potential map and, in turn, on the expansion of the ions.


  • Numerical suite for cathodeless plasma thrusters

    by M. Magarotto, S. Di Fede, N. Souhair, S. Andrews, F. Ponti


  • Fully kinetic model of plasma expansion in a magnetic nozzle

    by Shaun Andrews, Simone Di Fede, Mirko Magarotto

    A self-consistent model is presented for performing steady-state fully kinetic particle-in-cell simulations of magnetised plasma plumes. An energy-based electron reflection prevents the numerical pump instability associated with a typical open-outflow boundary, and is shown to be sufficiently general that both the plume kinetics and plasma potential demonstrate domain independence (within 6%). This is upheld by non-stationary Robin-type boundary conditions on the Poisson’s equation, coupled to a capacitive circuit that allows physical evolution of the downstream potential drop in the transient. The method has been validated against experiments, providing results that fall within the uncertainty of measurements. Simulations are then carried out to study collisional xenon discharges into axisymmetric diverging magnetic nozzles (MNs). Particular discussion is given to the identification of a collision-enhanced potential well arising from charge separation at the plume periphery, the role of ion–neutral charge exchange, and a three-region piecewise polytropic cooling regime for electrons. The polytropic index is shown to depend on the degree of magnetisation. Specifically, in the region near the thruster outlet, the plume is weakly-magnetised due to the cross-field diffusion of electron-heavy particle collisions. Downstream, a strongly-magnetised region of near-isothermal expansion occurs. Finally, in the detached region, the polytropic index tends to that of a more adiabatic unmagnetised case. With an increasing MN field strength, an inferior limit is found to the average polytropic index of γ ¯ e ∼ 1.16 .


  • Open Access

    Simulation of the plume of a magnetically enhanced plasma thruster with SPIS

    by Simone Di Fede, Mirko Magarotto, Shaun Andrews, Daniele Pavarin

    A three-dimensional fully kinetic particle-in-cell (PIC) simulation strategy has been implemented to simulate the acceleration stage of a magnetically enhanced plasma thruster (MEPT). The study has been performed with the open-source code Spacecraft Plasma Interaction Software (SPIS). The tool has been copiously modified to simulate properly the dynamics of a magnetized plasma plume. A cross-validation of the methodology has been done with Starfish, a two-dimensional open-source PIC software. Two configurations have been compared: (i) in the absence of a magnetic field and (ii) in the presence of a magnetic field generated by a coil with maximum intensity of 300 G at the thruster outlet. The results show a reduction of the plume divergence angle, an increase of ion speed and an increase of the specific impulse in the presence of the magnetic nozzle. The simulations presented in this study are representative of the operative conditions of a 50 W MEPT. Nonetheless, the methodology adopted can be extended to handle the magnetized plasma plume of several other types of thrusters such as electron cyclotron resonance and applied field magnetoplasmadynamic thrusters.