Veysel Aslan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Veysel Aslan has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Mehmet Yaşar Sepetçioğlu
Harran Universitesi
2 shared publications - Recep Çelik
Dicle Universitesi
2 shared publications - Mehmet Fatih Dilekoğlu
Harran Universitesi
1 shared publication Mehmet Yasar Sepetcioglu
1 shared publication
Latest Publications
- 28 September 2026
- Published by Dicle Universitesi Muhendislik Fakultesi Muhendislik Dergisi in Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
- Vol. 17 (3)
Evaluation of Site Suitability for Telecommunications Infrastructure Using GIS-Supported AHP in the Context of Urban Construction Engineering in Sanliurfa
Base station site selection is a critical engineering problem that requires the integration of technical, environmental, and geographical factors to ensure efficient and sustainable telecommunication infrastructure. This study aims to identify the most suitable locations for base station deployment in Şanlıurfa Province, Türkiye, by integrating Geographic Information Systems (GIS) with the Analytic Hierarchy Process (AHP) and the Bayesian Best–Worst Method (BBWM) to improve the reliability of multi-criteria decision-making. A GIS-based multi-criteria decision-making framework was established using six environmental and engineering evaluation criteria, namely precipitation, soil type, slope, land use, geological structure, and drainage density. Criterion weights obtained from AHP and BBWM were integrated into a GIS-based weighted overlay analysis to generate a spatial suitability map for base station installation. The results indicate that 48% of the study area was classified as highly suitable for base station deployment, including 7% (1,346.94 km²) identified as the most suitable and 41% (7,889.22 km²) as suitable. Additionally, 20% (3,848.40 km²) of the area was classified as moderately suitable, while the remaining 32% (6,157.44 km²) exhibited low suitability. The findings demonstrate that the proposed GIS-based multi-criteria framework provides an effective decision-support tool for optimizing telecommunication infrastructure planning and site selection while considering environmental constraints and engineering feasibility. The proposed approach also supports sustainable urban infrastructure planning and informed land-use decision-making in regions with similar geographical and environmental characteristics.
- 28 September 2026
- Published by Dicle Universitesi Muhendislik Fakultesi Muhendislik Dergisi in Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
- Vol. 17 (3)
Evaluation of Site Suitability for Telecommunications Infrastructure Using GIS-Supported AHP in the Context of Urban Construction Engineering in Sanliurfa
Base station site selection is a critical engineering problem that requires the integration of technical, environmental, and geographical factors to ensure efficient and sustainable telecommunication infrastructure. This study aims to identify the most suitable locations for base station deployment in Şanlıurfa Province, Türkiye, by integrating Geographic Information Systems (GIS) with the Analytic Hierarchy Process (AHP) and the Bayesian Best–Worst Method (BBWM) to improve the reliability of multi-criteria decision-making. A GIS-based multi-criteria decision-making framework was established using six environmental and engineering evaluation criteria, namely precipitation, soil type, slope, land use, geological structure, and drainage density. Criterion weights obtained from AHP and BBWM were integrated into a GIS-based weighted overlay analysis to generate a spatial suitability map for base station installation. The results indicate that 48% of the study area was classified as highly suitable for base station deployment, including 7% (1,346.94 km²) identified as the most suitable and 41% (7,889.22 km²) as suitable. Additionally, 20% (3,848.40 km²) of the area was classified as moderately suitable, while the remaining 32% (6,157.44 km²) exhibited low suitability. The findings demonstrate that the proposed GIS-based multi-criteria framework provides an effective decision-support tool for optimizing telecommunication infrastructure planning and site selection while considering environmental constraints and engineering feasibility. The proposed approach also supports sustainable urban infrastructure planning and informed land-use decision-making in regions with similar geographical and environmental characteristics.
- Open Access
- 3 June 2026
- Published by Kahramanmaras Sutcu Imam University Journal of Engineering Sciences in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 29 (2) , 629-650
GROUNDWATER FLOW MODELING BASED ON DARCY’S LAW USING AN INTEGRATED AHP–TOPSIS–GIS APPROACH: A CASE STUDY OF BIRECIK, SANLIURFA
In this study, the groundwater flow characteristics of the Birecik District (Şanlıurfa, Turkey) were investigated based on Darcy’s Law using an integrated GIS-based multi-criteria decision analysis framework combining the Analytical Hierarchy Process (AHP) and TOPSIS. Conceptual and hydraulic parameters influencing groundwater flow, including hydraulic head, effective head, hydraulic gradient, hydraulic conductivity, and permeability, were defined in accordance with Darcy’s principles. Hydraulic conductivity and soil permeability data were utilized to develop a Darcy-based conceptual groundwater model within a GIS environment. The criteria weights derived from AHP were integrated into the TOPSIS method to evaluate the suitability of Darcy flow conditions. The results indicate that hydraulic gradient, soil texture, and pore structure are the most influential parameters controlling groundwater flow in the study area, with the hydraulic gradient exhibiting the highest AHP weight (34%). Spatial analyses successfully revealed the heterogeneous distribution of hydraulic conductivity and permeability, and the model demonstrated strong performance with a coefficient of determination (R²) of 0.92. This integrated approach provides a reliable framework for assessing Darcy-based groundwater flow in data-limited regions.
- 3 June 2026
- Published by Kahramanmaras Sutcu Imam University Journal of Engineering Sciences in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 29 (2) , 629-650
Open AccessGROUNDWATER FLOW MODELING BASED ON DARCY’S LAW USING AN INTEGRATED AHP–TOPSIS–GIS APPROACH: A CASE STUDY OF BIRECIK, SANLIURFA
In this study, the groundwater flow characteristics of the Birecik District (Şanlıurfa, Turkey) were investigated based on Darcy’s Law using an integrated GIS-based multi-criteria decision analysis framework combining the Analytical Hierarchy Process (AHP) and TOPSIS. Conceptual and hydraulic parameters influencing groundwater flow, including hydraulic head, effective head, hydraulic gradient, hydraulic conductivity, and permeability, were defined in accordance with Darcy’s principles. Hydraulic conductivity and soil permeability data were utilized to develop a Darcy-based conceptual groundwater model within a GIS environment. The criteria weights derived from AHP were integrated into the TOPSIS method to evaluate the suitability of Darcy flow conditions. The results indicate that hydraulic gradient, soil texture, and pore structure are the most influential parameters controlling groundwater flow in the study area, with the hydraulic gradient exhibiting the highest AHP weight (34%). Spatial analyses successfully revealed the heterogeneous distribution of hydraulic conductivity and permeability, and the model demonstrated strong performance with a coefficient of determination (R²) of 0.92. This integrated approach provides a reliable framework for assessing Darcy-based groundwater flow in data-limited regions.
- Open Access
- 7 January 2026
- Published by Journal of Anatolian Environmental and Animal Sciences in Journal of Anatolian Environmental and Animal Sciences
- No. 2026
Hydrogeological Evaluation of Hydrological Data and Criteria Correlation Using GIS and AHP Methods in Hilvan District, Şanlıurfa, Türkiye
This study evaluates the groundwater potential of the study area through the integrated analysis of key hydrogeological parameters. Based on long-term precipitation and groundwater level data, the mean annual precipitation was determined as 456.23 mm, while groundwater levels ranged between 4.2 m and 18.7 m, with an average depth of 10.3 m. Water budget calculations indicate that approximately 3.9 million m³ of water infiltrates into the aquifer annually. A total of nine parameters—precipitation, aquifer characteristics, slope, drainage density, soil type, geology, land use, geomorphology, and land capability—were analyzed using Geographic Information Systems (GIS) in raster format. The weights of these parameters were determined using the Analytic Hierarchy Process (AHP), and the consistency of the model was validated with a consistency ratio of CR = 0.07. Correlation analysis revealed strong positive relationships between precipitation and groundwater levels, as well as between permeability and groundwater potential (r > 0.6), while a significant negative correlation was observed between slope and groundwater potential (r < -0.5). According to the Groundwater Potential Map, 10% of the study area is classified as “very good,” 20.80% as “good,” 30.56% as “moderate,” 18.75% as “poor,” and 19.89% as “very poor.” The results indicate that approximately 22% of the area has high groundwater potential, making these zones priority targets for future well siting and sustainable groundwater resource management.
- 7 January 2026
- Published by Journal of Anatolian Environmental and Animal Sciences in Journal of Anatolian Environmental and Animal Sciences
- No. 2026
Open AccessHydrogeological Evaluation of Hydrological Data and Criteria Correlation Using GIS and AHP Methods in Hilvan District, Şanlıurfa, Türkiye
This study evaluates the groundwater potential of the study area through the integrated analysis of key hydrogeological parameters. Based on long-term precipitation and groundwater level data, the mean annual precipitation was determined as 456.23 mm, while groundwater levels ranged between 4.2 m and 18.7 m, with an average depth of 10.3 m. Water budget calculations indicate that approximately 3.9 million m³ of water infiltrates into the aquifer annually. A total of nine parameters—precipitation, aquifer characteristics, slope, drainage density, soil type, geology, land use, geomorphology, and land capability—were analyzed using Geographic Information Systems (GIS) in raster format. The weights of these parameters were determined using the Analytic Hierarchy Process (AHP), and the consistency of the model was validated with a consistency ratio of CR = 0.07. Correlation analysis revealed strong positive relationships between precipitation and groundwater levels, as well as between permeability and groundwater potential (r > 0.6), while a significant negative correlation was observed between slope and groundwater potential (r < -0.5). According to the Groundwater Potential Map, 10% of the study area is classified as “very good,” 20.80% as “good,” 30.56% as “moderate,” 18.75% as “poor,” and 19.89% as “very poor.” The results indicate that approximately 22% of the area has high groundwater potential, making these zones priority targets for future well siting and sustainable groundwater resource management.
- Open Access
- 20 August 2025
- Published by Elsevier in The Egyptian Journal of Remote Sensing and Space Sciences
- Vol. 28 (3) , 553-561
Modeling and evaluation of Mardin groundwater level potential using the TOPSIS method
- 20 August 2025
- Published by Elsevier in The Egyptian Journal of Remote Sensing and Space Sciences
- Vol. 28 (3) , 553-561
Open AccessModeling and evaluation of Mardin groundwater level potential using the TOPSIS method
- Open Access
- 16 June 2025
- Published by Harran Tarim ve Gida Dergisi in Harran Tarım ve Gıda Bilimleri Dergisi
- Vol. 29 (2) , 299-315
Modeling and evaluation of Siverek (Şanlıurfa) groundwater potential by GIS and TOPSIS method
In addition to being an important part of the hydrological and hydrogeological systems in its area, it is an important strategy in terms of protecting and developing the gradually depleted groundwater within the resources. It is inevitable to evaluate the groundwater potential and quality of the Siverek basin for gains such as determination of water supply and distribution. Therefore, the mechanism of groundwater should be determined by sensitive hydrological and hydrogeological modeling studies. While current groundwater studies can explain groundwater hydraulics and hydrology, there is little literature on groundwater behavior under variable parameters and different scenarios involving surface water and groundwater interactions. In this study, the TOPSIS method based on the GIS program modeling the groundwater flow was used and the evaluation parameter weights were calculated using MCDM methods. By comparing the parameters with each other, the weights of the criteria were determined by the TOPSIS method. A total score was determined according to the evaluation form for 8 different suggestions entered into the system, such as rainfall, aquifer, slope, drainage density, soil type, geology, geomorphology. The highest scoring parameters were ranked in both methods. In the last stage, the parameters were evaluated and an order of superiority was determined for the ideal solution. The study was concluded by comparing the methods among each other.
- 16 June 2025
- Published by Harran Tarim ve Gida Dergisi in Harran Tarım ve Gıda Bilimleri Dergisi
- Vol. 29 (2) , 299-315
Open AccessModeling and evaluation of Siverek (Şanlıurfa) groundwater potential by GIS and TOPSIS method
In addition to being an important part of the hydrological and hydrogeological systems in its area, it is an important strategy in terms of protecting and developing the gradually depleted groundwater within the resources. It is inevitable to evaluate the groundwater potential and quality of the Siverek basin for gains such as determination of water supply and distribution. Therefore, the mechanism of groundwater should be determined by sensitive hydrological and hydrogeological modeling studies. While current groundwater studies can explain groundwater hydraulics and hydrology, there is little literature on groundwater behavior under variable parameters and different scenarios involving surface water and groundwater interactions. In this study, the TOPSIS method based on the GIS program modeling the groundwater flow was used and the evaluation parameter weights were calculated using MCDM methods. By comparing the parameters with each other, the weights of the criteria were determined by the TOPSIS method. A total score was determined according to the evaluation form for 8 different suggestions entered into the system, such as rainfall, aquifer, slope, drainage density, soil type, geology, geomorphology. The highest scoring parameters were ranked in both methods. In the last stage, the parameters were evaluated and an order of superiority was determined for the ideal solution. The study was concluded by comparing the methods among each other.
- Open Access
- 24 April 2024
- Published by Peertechz Publications Private Limited in Journal of Civil Engineering and Environmental Sciences
- Vol. 10 (1) , 021-025
Use of water resources and sustainability with concepts, definitions and examples
Water is a vital resource for all living things (people, ecosystems, economic development, energy production, national security). Coordination and harmony in spatial and intersectoral planning and decision-making processes can be achieved through the rational and sustainable use of water resources. Protection and sustainable use of water resources is extremely important. Nowadays, problems such as drought and water pollution arise due to global warming and increasing environmental pollution. This situation reduces drinking water resources. Serious measures need to be taken worldwide to ensure the continuity of life protect water resources from drought and keep them clean. Techniques used to evaluate the potential of water resources, which have become increasingly important in recent years, and to create conscious use of water resources, require effective data systems. Currently used systems do not represent very large areas. For this reason, it is necessary to develop representative methods by integrating the data received from ground stations and the parameters of remote sensing techniques. Many extensions of the programs, which are widely used in the world and evaluated using Geographic Information System (GIS) supported Analytical Hierarchy Process (AHP) methods in database studies for the use of water resources, are extremely useful for basin modeling. The purpose of this study; It is a study on the potential of GIS-based multivariate statistics for evaluating the use and sustainability of water resources and the use of water stored in a geographical database.
- 24 April 2024
- Published by Peertechz Publications Private Limited in Journal of Civil Engineering and Environmental Sciences
- Vol. 10 (1) , 021-025
Open AccessUse of water resources and sustainability with concepts, definitions and examples
Water is a vital resource for all living things (people, ecosystems, economic development, energy production, national security). Coordination and harmony in spatial and intersectoral planning and decision-making processes can be achieved through the rational and sustainable use of water resources. Protection and sustainable use of water resources is extremely important. Nowadays, problems such as drought and water pollution arise due to global warming and increasing environmental pollution. This situation reduces drinking water resources. Serious measures need to be taken worldwide to ensure the continuity of life protect water resources from drought and keep them clean. Techniques used to evaluate the potential of water resources, which have become increasingly important in recent years, and to create conscious use of water resources, require effective data systems. Currently used systems do not represent very large areas. For this reason, it is necessary to develop representative methods by integrating the data received from ground stations and the parameters of remote sensing techniques. Many extensions of the programs, which are widely used in the world and evaluated using Geographic Information System (GIS) supported Analytical Hierarchy Process (AHP) methods in database studies for the use of water resources, are extremely useful for basin modeling. The purpose of this study; It is a study on the potential of GIS-based multivariate statistics for evaluating the use and sustainability of water resources and the use of water stored in a geographical database.
- Open Access
- 18 November 2023
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (1) , 117-132
Determination of Ömerli Groundwater Potential using GIS Based Analytical Hierarchy Process (AHP) approach
Water, which is an indispensable element of human life, is also a basic need for living things and nature. Groundwater, which is the world's freshwater source, has low-cost usage opportunities because it is generally of high quality and does not need to be treated. For this reason, there has been an excessive increase in the use of groundwater in recent years due to the low rainfall and limited surface waters. Accordingly, in recent years, the lack of precipitation and the decrease in surface water potential have led to an excessive increase in groundwater use. Nowadays, technology, which is called the information age and finds its place in almost all professional applications, supports practitioners in terms of time, effort, and cost. Among these technological studies, Geographic Information System (GIS) applications are one of the most popular fields of study (detection and monitoring of groundwater resources and application of thematic maps with spatial analysis). The AHP technique, one of the GIS-supported MCDM methods, was used to reveal the groundwater potential of the Ömerli district basin of Mardin province. First of all, raster maps were created in the GIS program ArcGIS ArcMap environment, and then reclassified maps were produced. These data regarding the basin study were obtained from official institutions and private drilling companies that work on groundwater. In the first stage of the study, data related to groundwater potential such as precipitation, static water level, dynamic water level, well yield, depth, and aspect were modeled. In the second stage, these data were weighted in AHP and the resulting map was created and interpreted; It was created and interpreted with very bad, bad, moderate, good and very good values. In the third and last stage, the results and recommendations were discussed.
- 18 November 2023
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (1) , 117-132
Open AccessDetermination of Ömerli Groundwater Potential using GIS Based Analytical Hierarchy Process (AHP) approach
Water, which is an indispensable element of human life, is also a basic need for living things and nature. Groundwater, which is the world's freshwater source, has low-cost usage opportunities because it is generally of high quality and does not need to be treated. For this reason, there has been an excessive increase in the use of groundwater in recent years due to the low rainfall and limited surface waters. Accordingly, in recent years, the lack of precipitation and the decrease in surface water potential have led to an excessive increase in groundwater use. Nowadays, technology, which is called the information age and finds its place in almost all professional applications, supports practitioners in terms of time, effort, and cost. Among these technological studies, Geographic Information System (GIS) applications are one of the most popular fields of study (detection and monitoring of groundwater resources and application of thematic maps with spatial analysis). The AHP technique, one of the GIS-supported MCDM methods, was used to reveal the groundwater potential of the Ömerli district basin of Mardin province. First of all, raster maps were created in the GIS program ArcGIS ArcMap environment, and then reclassified maps were produced. These data regarding the basin study were obtained from official institutions and private drilling companies that work on groundwater. In the first stage of the study, data related to groundwater potential such as precipitation, static water level, dynamic water level, well yield, depth, and aspect were modeled. In the second stage, these data were weighted in AHP and the resulting map was created and interpreted; It was created and interpreted with very bad, bad, moderate, good and very good values. In the third and last stage, the results and recommendations were discussed.
- Open Access
- 15 July 2023
- Published by Ankara University Faculty of Agriculture in Tarım Bilimleri Dergisi
- Vol. 30 (1) , 47-60
Determination of Potential Groundwater in Van Province Basin using GIS-based MCDM, AHP and Fuzzy-AHP Methods
Global warming and climate change put excessive pressure on the use of groundwater resources. As the demand for water consumption in fields such as agriculture and industry increases worldwide, the need for the modeling and evaluation of groundwater potential and quality efficiency increases accordingly. Nowadays, methods based on multi-criteria decision-making techniques such as geographic information systems (GIS), analytical hierarchy process (AHP), fuzzy analytical hierarchy process (F-AHP) and ELECTRE have begun to be used rapidly in the field of groundwater. These methods are of great importance because they reveal information faster. They are also a tool for the communication and meaning of information. In the light of this information, this study was carried out in order to model and evaluate the groundwater potential and quality of Van, Türkiye. In order to evaluate the groundwater potential of the Van province basin, remote sensing data with AHP and Fuzzy AHP methods, which are GIS-based MCDM programs, were used. Eight thematic maps such as precipitation, slope, soil texture, land use/land cover, geology, geomorphology, drainage density, drainage density and fault density were created. These thematic parameters were graded and weighted in the AHP method according to their effects on the groundwater potential. Then, five different groundwater recharge potential regions were classified as very good (8%), good (17%), moderate (43.37%), poor (23.03%) and very poor (9.6%). The evidence obtained by validating the results is in line with flow calculation studies showing that groundwater flows from the south to the northeast, middle and north to the southwest of the basin. The evidence obtained by validating the results is consistent with the flow calculation values showing that the groundwater basin flows from south to northeast, center and north to southwest of the study area. The validation shows that the method applied for the study area gives a meaningful and reliable result.
- 15 July 2023
- Published by Ankara University Faculty of Agriculture in Tarım Bilimleri Dergisi
- Vol. 30 (1) , 47-60
Open AccessDetermination of Potential Groundwater in Van Province Basin using GIS-based MCDM, AHP and Fuzzy-AHP Methods
Global warming and climate change put excessive pressure on the use of groundwater resources. As the demand for water consumption in fields such as agriculture and industry increases worldwide, the need for the modeling and evaluation of groundwater potential and quality efficiency increases accordingly. Nowadays, methods based on multi-criteria decision-making techniques such as geographic information systems (GIS), analytical hierarchy process (AHP), fuzzy analytical hierarchy process (F-AHP) and ELECTRE have begun to be used rapidly in the field of groundwater. These methods are of great importance because they reveal information faster. They are also a tool for the communication and meaning of information. In the light of this information, this study was carried out in order to model and evaluate the groundwater potential and quality of Van, Türkiye. In order to evaluate the groundwater potential of the Van province basin, remote sensing data with AHP and Fuzzy AHP methods, which are GIS-based MCDM programs, were used. Eight thematic maps such as precipitation, slope, soil texture, land use/land cover, geology, geomorphology, drainage density, drainage density and fault density were created. These thematic parameters were graded and weighted in the AHP method according to their effects on the groundwater potential. Then, five different groundwater recharge potential regions were classified as very good (8%), good (17%), moderate (43.37%), poor (23.03%) and very poor (9.6%). The evidence obtained by validating the results is in line with flow calculation studies showing that groundwater flows from the south to the northeast, middle and north to the southwest of the basin. The evidence obtained by validating the results is consistent with the flow calculation values showing that the groundwater basin flows from south to northeast, center and north to southwest of the study area. The validation shows that the method applied for the study area gives a meaningful and reliable result.
- Open Access
- 7 June 2023
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 27 (7) , 2891-2907
Evaluation of Birecik Basin Flood Detection with GIS Assisted AHP Methods
- 7 June 2023
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 27 (7) , 2891-2907
Open AccessEvaluation of Birecik Basin Flood Detection with GIS Assisted AHP Methods
- 24 April 2023
- Published by Springer Nature in Sustainable Water Resources Management
- Vol. 9 (3) , 1-15
Evaluation of Sanliurfa Karakopru basin groundwater potential for sustainability with GIS-based AHP and TOPSIS methods
- 24 April 2023
- Published by Springer Nature in Sustainable Water Resources Management
- Vol. 9 (3) , 1-15
Evaluation of Sanliurfa Karakopru basin groundwater potential for sustainability with GIS-based AHP and TOPSIS methods