Chengyu Yang
Chengyu Yang has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Jianbin Chen
Guangdong Titans Intelligent Power Company Ltd., Zhuhai, Guangdong, China
4 shared publications - Jianjun Zou
Guangdong Titans Intelligent Power Company Ltd., Zhuhai, Guangdong, China
4 shared publications Kai Chen
Guangdong Titans Intelligent Power Company Ltd., Zhuhai, Guangdong, China
1 shared publication- Shengzong Zhang
Electrical Engineering and Automation, Northeast Electric Power University, Jilin, China
1 shared publication Zongsheng Tang
Guangdong Titans Intelligent Power Co., Ltd, Zhuhai, 519000, China
1 shared publication
Latest Publications
- Open Access
- 26 September 2025
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 172
Optimization control strategy of wide ZVS range and automatic Euler angle for bi-directional wireless power transfer system by TPS
- 26 September 2025
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 172
Open AccessOptimization control strategy of wide ZVS range and automatic Euler angle for bi-directional wireless power transfer system by TPS
- Open Access
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 44750-44759
Multiplier Operated Controller for CCM Boost PFC Converter With Regulated Input Impedance and Improved Power Factor
Power factor correction (PFC) plays a crucial role in power electronics, particularly in enhancing the efficiency and stability of power systems. As continuous conduction mode (CCM) boost PFC converters become increasingly prevalent, research into their control strategies has deepened. While average current mode (ACM) control is commonly used, it faces several challenges in practical applications. Traditional ACM control methods struggle with input impedance regulation, especially within certain frequency ranges, where maintaining constant input impedance is difficult. This leads to issues such as current distortion and reduced efficiency. Additionally, bandwidth adjustment and ripple disturbance suppression with standard control procedures remain significant challenges. To address these issues, this paper proposes a novel multiplier-operated controller specifically designed for CCM boost PFC converters. The controller employs an innovative methodology to effectively modify and maintain input impedance at a defined constant within a specific frequency range. Furthermore, a specialized compensator is integrated to optimize bandwidth and minimize ripple disturbances. Experimental results from a 600W prototype demonstrate that the proposed controller achieves a power factor of up to 0.98 and significantly enhances efficiency and other performance metrics. This study provides new insights and technical approaches for improving the control strategies of CCM boost PFC converters.
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 44750-44759
Open AccessMultiplier Operated Controller for CCM Boost PFC Converter With Regulated Input Impedance and Improved Power Factor
Power factor correction (PFC) plays a crucial role in power electronics, particularly in enhancing the efficiency and stability of power systems. As continuous conduction mode (CCM) boost PFC converters become increasingly prevalent, research into their control strategies has deepened. While average current mode (ACM) control is commonly used, it faces several challenges in practical applications. Traditional ACM control methods struggle with input impedance regulation, especially within certain frequency ranges, where maintaining constant input impedance is difficult. This leads to issues such as current distortion and reduced efficiency. Additionally, bandwidth adjustment and ripple disturbance suppression with standard control procedures remain significant challenges. To address these issues, this paper proposes a novel multiplier-operated controller specifically designed for CCM boost PFC converters. The controller employs an innovative methodology to effectively modify and maintain input impedance at a defined constant within a specific frequency range. Furthermore, a specialized compensator is integrated to optimize bandwidth and minimize ripple disturbances. Experimental results from a 600W prototype demonstrate that the proposed controller achieves a power factor of up to 0.98 and significantly enhances efficiency and other performance metrics. This study provides new insights and technical approaches for improving the control strategies of CCM boost PFC converters.
- Open Access
- 15 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 132635-132643
Robust Enhanced Voltage Range Control for Industrial Robot Chargers
The two stage converter has become a popular off-board topology for high power charging due to its high efficiency and economy. However, a series of performance degradations caused by operating frequencies which deviate from the resonant frequency are its most significant disadvantage. This drawback has become a particularly significant challenge in industrial robot charging applications. This paper proposes a linear segmented voltage control strategy that allows the voltage to be manipulated in segments depending on the state of charge. It allows for a wider voltage range while achieving excellent control accuracy and compelling operational performance. Not only is the implementation of this control strategy discussed, but engineering issues such as which adjustments to the parameters of the LLC resonant tank are required are also analysed. In addition, it is discussed how the PFC module should be adjusted for the output voltage under this control strategy. Finally, a prototype with a maximum output power of 20 kW is produced to verify the various performance improvements of this strategy in high-power charging applications.
- 15 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 132635-132643
Open AccessRobust Enhanced Voltage Range Control for Industrial Robot Chargers
The two stage converter has become a popular off-board topology for high power charging due to its high efficiency and economy. However, a series of performance degradations caused by operating frequencies which deviate from the resonant frequency are its most significant disadvantage. This drawback has become a particularly significant challenge in industrial robot charging applications. This paper proposes a linear segmented voltage control strategy that allows the voltage to be manipulated in segments depending on the state of charge. It allows for a wider voltage range while achieving excellent control accuracy and compelling operational performance. Not only is the implementation of this control strategy discussed, but engineering issues such as which adjustments to the parameters of the LLC resonant tank are required are also analysed. In addition, it is discussed how the PFC module should be adjusted for the output voltage under this control strategy. Finally, a prototype with a maximum output power of 20 kW is produced to verify the various performance improvements of this strategy in high-power charging applications.
- Open Access
- 23 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 157790-157799
A High Power Interleaved Parallel Topology Full-Bridge LLC Converter for Off-Board Charger
A interleaved parallel LLC converter is proposed as a DC/DC converter for a digital off-board charger in accordance with the high output power requirements of modern electric vehicle chargers. The proposed converter utilizes a hybrid control strategy of pulse frequency modulation (PFM) and pulse width modulation (PWM) that can greatly increase the adjustable output voltage range. As a result of these designs, a silky target voltage can be achieved. The proposed LLC converter has been rigorously analyzed and parametrically designed. To verify the design parameters of the proposed LLC converter, a laboratory prototype with an output voltage range of 40-110 V and a maximum output power of 20 kW was fabricated. The rated output voltage and rated output current are 80 V and 200 A, respectively, while its switching frequency range is 100-250 kHz and its resonant frequency is 153 kHz. This prototype exhibits incredible robustness and stability, and achieves a flexible, stability and sensitivity to automatically adapt the target output voltage value.
- 23 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 157790-157799
Open AccessA High Power Interleaved Parallel Topology Full-Bridge LLC Converter for Off-Board Charger
A interleaved parallel LLC converter is proposed as a DC/DC converter for a digital off-board charger in accordance with the high output power requirements of modern electric vehicle chargers. The proposed converter utilizes a hybrid control strategy of pulse frequency modulation (PFM) and pulse width modulation (PWM) that can greatly increase the adjustable output voltage range. As a result of these designs, a silky target voltage can be achieved. The proposed LLC converter has been rigorously analyzed and parametrically designed. To verify the design parameters of the proposed LLC converter, a laboratory prototype with an output voltage range of 40-110 V and a maximum output power of 20 kW was fabricated. The rated output voltage and rated output current are 80 V and 200 A, respectively, while its switching frequency range is 100-250 kHz and its resonant frequency is 153 kHz. This prototype exhibits incredible robustness and stability, and achieves a flexible, stability and sensitivity to automatically adapt the target output voltage value.