XGXiaonan Gao

Xiaonan Gao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xiaonan Gao has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Adaptive Current Limiting and Common-Mode Voltage Injection for Maximizing Fault Current in Grid-Forming MMCs Under Asymmetrical Faults

    by Xiaonan Gao, Xiongfei Wang

    Grid-forming modular multilevel converters (MMC) face challenges in maximizing fault current contribution under unbalanced grid faults due to internal dc circulating currents. This paper proposes an adaptive current-limiting control based on virtual impedance to maximize the fault current while ensuring the MMC’s arm currents remain within limits. The method initially inserts a computed virtual impedance to limit the surge current, then dynamically adjusts this impedance so that the peak arm current exactly reaches its allowable limit, thereby fully utilizing the MMC’s current capability. Furthermore, a fundamental-frequency common-mode voltage injection is introduced to actively drive the dc circulating current in opposition to the dc-link current component, which further boosts the achievable fault current. Simulation and experimental results demonstrate that the proposed strategy significantly increases fault current supply compared to conventional fixed-threshold limiting, without exceeding device current ratings. The results also show improved positive sequence voltage support and reduced negative sequence voltage at the point of common coupling, validating the effectiveness of the proposed control in enhancing fault ride-through performance.

  • High-frequency position tracking control framework for PMSM-based servo system considering dynamic load identification

    by Jinhui Xia, Ze Li, Pengfei He, Xiaonan Gao

    In permanent magnet synchronous machine (PMSM)-based servo systems, the intricate interplay of electrical and magnetic dynamics poses many practical challenges, particularly in high-frequency position tracking scenarios. Inappropriate control methods employed with the PMSM may lead to unacceptable phase lags and even jeopardize the connected precision machining or laser processing devices. This article establishes a high-frequency position tracking control framework for PMSM-based servo systems considering dynamic load identification. Therein, a reduced-order generalized proportional-integral observer-based composite control strategy is developed for stator current regulation, aiming at improving the transient/steady-state performance and anti-disturbance capability. An adaptive quasi-proportional-resonant control and a disturbance observer are proposed for position and speed regulations, respectively, enabling the rapid tracking of high-frequency sinusoidal references, as well as the accurate identification of load conditions of the PMSM. The stability of these algorithms is theoretically verified by accommodating the model of the servo system. The superiority of the proposed high-frequency position tracking control framework considering various operating scenarios of the system is verified by diversified simulations and hardware-in-the-loop-based experiments.


  • Model-Free Deadbeat Direct Speed Control With Adaptive Bandwidth Factor in Surface-Mounted Permanent Magnet Synchronous Motor

    by Guowang Zhang, Xuliang Yao, Xiaonan Gao, Zhaokai Li

    This paper presents a model-free deadbeat predictive direct speed control strategy for surface-mounted permanent magnet synchronous motors incorporating an adaptive-bandwidth extended state observer. Unlike conventional extended state observers with fixed bandwidth factors, which lack adaptability under varying conditions and introduce coordination difficulties between speed and current loops, the proposed method presents an observation-error-driven bandwidth adjustment mechanism. This method enables real-time and independent adjustment of the bandwidth factors for the lumped disturbance observers of speed and current, thereby dynamically balancing disturbance rejection and estimation accuracy under various operating conditions and enhancing the algorithm’s adaptability. To ensure theoretical stability, an integral-type Lyapunov function is constructed to guarantee the asymptotic convergence of the proposed adaptive bandwidth observer. Moreover, practical guidelines for parameter design principles are formulated to facilitate the implementation of the proposed method. Experimental results on a 750W SPMSM platform demonstrate that the proposed strategy significantly improves transient performance and adaptability compared to fixed-bandwidth observer-based approaches.


  • Large-Signal Stability Assessment for Islanded MGs With a Mix of Grid-Following and Grid-Forming Inverters: A Networked Oscillators-Based Approach

    by Shu Gao, Hanbin Dang, Lei Wang, Yuhua Du, Xiaonan Gao, Hongjian Lin, Yigeng Huangfu

    This letter proposes a networked oscillators-based approach to analyze the large-signal stability of inverter-dominated microgrids (MGs). Compared with the conventional methods, the proposed analysis is applicable to islanded MGs with a mix of grid-following and grid-forming inverters. The equivalent networked oscillator model of such MGs with a general topology is developed, and the system’s frequency stability domain is analytically derived. A stability evaluation scheme is proposed accordingly and its effectiveness has been validated on a controller hardware-in-the-loop testbed for multiinverter applications.


  • Series Bipolar Hybrid Voltage Optimizer Based on Switching-Cell-Inserted Direct AC–AC Converter and Multiwindings Transformer

    by Dongbo Guo, Dehao Kong, Zhongchen Pei, Xiaonan Gao, Chuang Liu, Pinjia Zhang, Cristian Garcia, Jose Rodriguez

    This article proposes a series bipolar hybrid voltage optimizer (B-HVO), which can work at the noninverting and inverting modes for addressing voltage sag/swell in the utility grid. The superiority of the proposed system is that the direct ac–ac converter cell is deeply integrated with the multiwindings line frequency transformer, which not only effectively diminishes the switches quantities, but also avoids the use of additional isolated transformers when it is applied to distribution network. The proposed B-HVO inherits the strengths of converters fast response and line frequency transformers long-life. The B-HVO has much system reliability because the direct ac–ac converter cell has no shoot-through and commutation problems. In addition, the converter uses four switches and only two switches are switched at high frequency during each half-cycle of input voltage, which evidently reduces the total switching losses. Detailed analysis is provided with experimental results to validate the effectiveness of the proposed system. Besides, the measured data of the proposed system in the engineering demonstration application also proves its validity in handling voltage fluctuation problems.


  • Smooth Nonlinear ESO-Based Model-Free Predictive Current Control With an Extended Control Set for SPMSM Drives

    by Guowang Zhang, Xuliang Yao, Luca Peretti, Junchao Bai, Xiaonan Gao, Zhaokai Li, Shengqi Huang

    This paper proposes an improved nonlinear extended state observer-based model-free predictive current control with an extended control set. First, the nonsmoothness problem of conventional nonlinear extended state observer model-free solutions is explained. By constructing a high-smoothness polynomial series at the transition points of the piecewise nonlinear function, an improved nonlinear extended state observer is designed to enhance the performance of the model-free predictive current control, and relevant stability proofs are derived by the Routh criterion. Furthermore, a newly designed extended control set based on the voltage vectors at the center of triangular subregions of the modulation area is proposed to improve the output voltage accuracy. Based on the geometrical characteristics of the subregion center voltage vectors, a fast-layering selection method is proposed to reduce the complexity of determining the optimal voltage vector. Finally, experimental results are presented to verify the proposed method’s feasibility and effectiveness.


  • Computational Efficient DSVM-Based Model Predictive Direct Speed Control for SPMSM Drives With Mechanical Disturbance Suppression

    by Guowang Zhang, Xuliang Yao, Luca Peretti, Shengqi Huang, Xiaonan Gao, Chenwei Ma, Jingfang Wang, Zhaokai Li

    This paper proposes a simplified discrete space vector modulation-based model predictive direct speed control with an improved load disturbance observer for permanent magnet synchronous motor drives. Firstly, a simplified discrete space vector modulation method is used to improve the steady-state performance of model predictive direct speed control. In this discrete space vector modulation method, a novel geometric method relying only on three auxiliary lines in each sector is designed to simplify the algorithm’s complexity. In this way, the set of candidate vectors is quickly determined. Then, the current pulsation and speed of model predictive direct speed control are suppressed, and the computational burden of the discrete space vector modulation execution process is reduced. Secondly, the reasons that affect the dynamic performance of the conventional linear extended state observer-based mechanical disturbance observer are analyzed, and the observed error of the observer is derived. Based on the observer error, an improved mechanical disturbance observer is proposed to accelerate the convergence process. The Lyapunov theory proves the stability of the proposed observer. Finally, the feasibility of the proposed method is verified by experiments.


  • Continuous Control Set Predictive Speed Control of SPMSM Drives With Stability Improvement

    by Xicai Liu, Jin Wang, Xiaonan Gao, Wei Tian, Libing Zhou, Jose Rodriguez, Ralph Kennel

    Continuous control set predictive speed control (CCS-PSC) predicts and optimizes the speed trajectory of a drive system. The prediction horizon is commonly short to avoid a high computational burden. However, stability issues may arise with the short prediction horizon. In this paper, we propose an efficient strategy that enables CCS-PSC with a long prediction horizon, where Laguerre functions are adopted. Differ from existing methods, the equivalent speed tracking error is a controlled variable, which consists of the speed tracking error and its derivative. In this manner, speed overshoot can be eliminated. The dynamics of the equivalent speed tracking error and the direct axis current are naturally decoupled, where the linearization of the SPMSM model is not required. The performance of the proposed strategy is evaluated comprehensively. Simulation and experimental results show that the proposed strategy improves the system stability and the steady-state performance, while maintaining high dynamic performance.


  • Flux-Weakening Scheme for Four-Switch Inverter-Fed IM Drives With Optimized Overmodulation-Based Modulated Predictive Torque Control

    by Ze Li, Jinhui Xia, Xiaonan Gao, Cristian Garcia, Jose Rodriguez, Yuanbo Guo, Xiaohua Zhang

    Four-switch three-phase inverter (FSTPI) has been considered as a promising fault-tolerant topology for six-switch three-phase inverter (SSTPI) with an open-phase fault. However, the maximum linear voltage of FSTPI is reduced by half compared to SSTPI due to the reduced power switches, which limits the high-speed operation capability. In this article, a flux-weakening scheme for the FSTPI-fed induction motor (IM) using optimized overmodulation strategy-based modulated predictive torque control (M-PTC) is proposed. Therein, a voltage closed-loop flux-weakening control method considering the dc-link capacitor voltage offset (CVO) is developed to suppress the ripple in stator flux. An M-PTC strategy is proposed to handle the nonlinearities and constraints in IM drives, together with a two-long-voltage-vector-based pre-excitation scheme designed for maintaining the minimum CVO during the initial startup process. To increase the utilization rate of the dc-link voltage and the maximum output torque in flux-weakening region, an optimized overmodulation strategy is proposed to extend the available voltage from inscribed circle to quadrilateral region. Extensive experimental studies are carried out to verify the effectiveness of the proposed method.


  • A Cascade-Free Model Predictive Control Scheme for Back-to-Back Converter-Fed PMSM Drive System

    by Yingjie He, Ying Tang, Xiaonan Gao, Haotian Xie, Fengxiang Wang, Ralph Kennel

    In this article, a cascade-free model predictive control (MPC) scheme without the outer dc-link voltage control loop is proposed for the back-to-back converter-fed permanent magnet synchronous machine drive system. Specifically, the voltage regulation term is integrated together with the power regulation term into a newly constructed cost function so that the control of dc-link voltage as well as power can be realized by a single cost function. To predict accurately and to reduce the sensitivity to variable parameters, the expressions of dc-link voltage and power are dynamically corrected, thus enhancing the robustness. In addition to presenting no tracking deviation in steady state, the dc-link voltage also presents smaller deviation from reference and faster recovery time in dynamics. It is beneficial to enhancing the reliability of system since the voltage surge on power switches and diodes has been reduced. Besides, controllable power flow, sinusoidal phase current, and well-regulated electromagnetic torque can be achieved in the system as well. A series of experiments are carried out to test the feasibility of the proposed scheme. Performance comparisons with the classical proportional integration controller-based MPC and the modified cascade-free quasi-centralized MPC validate the improvements of the proposed control scheme.