Valentin Sonneville
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Valentin Sonneville has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Ludovic Renson
Imperial College London
3 shared publications - Michel Géradin
University of Liège, Liège, Belgium
3 shared publications - Amir Kamyar Bagheri
Imperial College London
2 shared publications - Daniel Jean Rixen
Chair of Applied Mechanics, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstr. 15, 85748 Garching, Germany
2 shared publications - Franziska Ochsenfarth
Technical University of Munich, TUM School of Engineering and Design, Department of Mechanical Engineering, Munich Institute of Robotics and Machine Intelligence (MIRMI), Chair of Applied Mechanics, Garching, Germany
2 shared publications - Jonas Wittmann
Technical University of Munich, TUM School of Engineering and Design, Department of Mechanical Engineering, Munich Institute of Robotics and Machine Intelligence (MIRMI), Chair of Applied Mechanics, Garching, Germany
2 shared publications
Latest Publications
- Open Access
- 26 September 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (4) , 1-19
Centralized vs. Decoupled Dual-arm Planning Taking into Account Path Quality
The aim of coordinated planning is to avoid robot-to-robot collisions in a multi-robot system, and there are two standard solution approaches: centralized planning and decoupled planning. Our first contribution is a decoupled planning approach that ensures $$\varvec{\mathcal {C}^2}$$ -continuous control commands with zero velocities and zero accelerations at the start and goal. We benchmark our decoupled approach with a centralized approach. Contrary to literature, we show that for a standard motion planning pipeline, such as the one used by MoveIt!, centralized planning is superior to decoupled planning in dual-arm manipulation: It has a lower computation time and a higher robustness. Our second contribution is an optimization that minimizes the rotational motion of an end-effector while considering obstacle avoidance. We derive the analytic gradients of this optimization problem, making the algorithm suitable for online motion planning. Our optimization extends an existing path quality improvement method. Integrating it into our decoupled approach overcomes its shortcomings and provides a motion planning pipeline that is robust at up to 99.9 % with a planning time of less than 1 s and that computes high-quality paths.- 26 September 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (4) , 1-19
Open AccessCentralized vs. Decoupled Dual-arm Planning Taking into Account Path Quality
The aim of coordinated planning is to avoid robot-to-robot collisions in a multi-robot system, and there are two standard solution approaches: centralized planning and decoupled planning. Our first contribution is a decoupled planning approach that ensures $$\varvec{\mathcal {C}^2}$$ -continuous control commands with zero velocities and zero accelerations at the start and goal. We benchmark our decoupled approach with a centralized approach. Contrary to literature, we show that for a standard motion planning pipeline, such as the one used by MoveIt!, centralized planning is superior to decoupled planning in dual-arm manipulation: It has a lower computation time and a higher robustness. Our second contribution is an optimization that minimizes the rotational motion of an end-effector while considering obstacle avoidance. We derive the analytic gradients of this optimization problem, making the algorithm suitable for online motion planning. Our optimization extends an existing path quality improvement method. Integrating it into our decoupled approach overcomes its shortcomings and provides a motion planning pipeline that is robust at up to 99.9 % with a planning time of less than 1 s and that computes high-quality paths. - 8 August 2024
- Published by Springer Nature
- p. 83-88
Nonlinear Normal Modes of Highly Flexible Beam Structures Modelled Under the $SE(2)$ Lie Group Framework- 8 August 2024
- Published by Springer Nature
- p. 83-88
Nonlinear Normal Modes of Highly Flexible Beam Structures Modelled Under the $SE(2)$ Lie Group Framework- Open Access
Centralized vs. Decoupled Dual-Arm Planning Taking into Account Path Quality
The aim of coordinated planning is to avoid robot-to-robot collisions in a multi-robot system, and there are two standard solution approaches: centralized planning and decoupled planning. Our first contribution is a decoupled planning approach that ensures C2-continuous control commands with zero velocities at the start and goal. We benchmark our decoupled approach with a centralized approach. Contrary to literature, we show that for a standard motion planning pipeline, such as the one used by MoveIt!, centralized planning is superior to decoupled planning in dual-arm manipulation: It has a lower computation time and a higher robustness. Our second contribution is an optimization that minimizes the rotational motion of an end-effector while considering obstacle avoidance. We derive the analytic gradients of this optimization problem, making the algorithm suitable for online motion planning. Our optimization extends an existing path quality improvement method. Integrating it into our decoupled approach overcomes its shortcomings and provides a motion planning pipeline that is robust at up to 99.9% with a planning time of less than 1s and that computes high-quality paths.
Open AccessCentralized vs. Decoupled Dual-Arm Planning Taking into Account Path Quality
The aim of coordinated planning is to avoid robot-to-robot collisions in a multi-robot system, and there are two standard solution approaches: centralized planning and decoupled planning. Our first contribution is a decoupled planning approach that ensures C2-continuous control commands with zero velocities at the start and goal. We benchmark our decoupled approach with a centralized approach. Contrary to literature, we show that for a standard motion planning pipeline, such as the one used by MoveIt!, centralized planning is superior to decoupled planning in dual-arm manipulation: It has a lower computation time and a higher robustness. Our second contribution is an optimization that minimizes the rotational motion of an end-effector while considering obstacle avoidance. We derive the analytic gradients of this optimization problem, making the algorithm suitable for online motion planning. Our optimization extends an existing path quality improvement method. Integrating it into our decoupled approach overcomes its shortcomings and provides a motion planning pipeline that is robust at up to 99.9% with a planning time of less than 1s and that computes high-quality paths.
- Open Access
- 19 December 2023
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 112 (3) , 1641-1659
Nonlinear normal modes of highly flexible beam structures modelled under the SE(3) Lie group framework
This work presents a shooting algorithm to compute the periodic responses of geometrically nonlinear structures modelled under the special Euclidean (SE) Lie group formulation. The formulation is combined with a pseudo-arclength continuation method, while special adaptations are made to ensure compatibility with the SE framework. Nonlinear normal modes (NNMs) of various two-dimensional structures including a doubly clamped beam, a shallow arch, and a cantilever beam are computed. Results are compared with a reference displacement-based FE model with von Kármán strains. Significant difference is observed in the dynamic response of the two models in test cases involving large degrees of beam displacements and rotation. Differences in the contribution of higher-order modes substantially affect the frequency-energy dependence and the nonlinear modal interactions observed between the models. It is shown that the SE model, owing to its exact representation of the beam kinematics, is better suited at adequately capturing complex nonlinear dynamics compared to the von Kármán model.
- 19 December 2023
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 112 (3) , 1641-1659
Open AccessNonlinear normal modes of highly flexible beam structures modelled under the SE(3) Lie group framework
This work presents a shooting algorithm to compute the periodic responses of geometrically nonlinear structures modelled under the special Euclidean (SE) Lie group formulation. The formulation is combined with a pseudo-arclength continuation method, while special adaptations are made to ensure compatibility with the SE framework. Nonlinear normal modes (NNMs) of various two-dimensional structures including a doubly clamped beam, a shallow arch, and a cantilever beam are computed. Results are compared with a reference displacement-based FE model with von Kármán strains. Significant difference is observed in the dynamic response of the two models in test cases involving large degrees of beam displacements and rotation. Differences in the contribution of higher-order modes substantially affect the frequency-energy dependence and the nonlinear modal interactions observed between the models. It is shown that the SE model, owing to its exact representation of the beam kinematics, is better suited at adequately capturing complex nonlinear dynamics compared to the von Kármán model.
- Open Access
- 8 November 2023
- Published by Springer Nature in Research Square
Nonlinear Normal Modes of Highly Flexible Beam Structures Modelled under the SE(3) Lie Group Framework
This work presents a shooting algorithm to compute the periodic responses of geometrically nonlinear structures modelled under the Special Euclidean (SE) Lie group formulation. The formulation is combined with a pseudo-arclength continuation method, while special adaptations are made to ensure compatibility with the SE framework. Nonlinear normal modes (NNM) of various two-dimensional structures including a doubly-clamped beam, a shallow arch, and a cantilever beam are computed. Results are compared with a reference displacement-based FE model with von Kármán strains. Significant difference is observed in the dynamic response of the two models in test cases involving large degrees of beam displacements and rotation. Differences in the contribution of higher order modes substantially affect the frequency-energy dependence and the nonlinear modal interactions observed between the models. It is shown that the SE model, owing to its exact representation of the beam kinematics, is better suited at adequately capturing complex nonlinear dynamics compared to the von Kármán model.
- 8 November 2023
- Published by Springer Nature in Research Square
Open AccessNonlinear Normal Modes of Highly Flexible Beam Structures Modelled under the SE(3) Lie Group Framework
This work presents a shooting algorithm to compute the periodic responses of geometrically nonlinear structures modelled under the Special Euclidean (SE) Lie group formulation. The formulation is combined with a pseudo-arclength continuation method, while special adaptations are made to ensure compatibility with the SE framework. Nonlinear normal modes (NNM) of various two-dimensional structures including a doubly-clamped beam, a shallow arch, and a cantilever beam are computed. Results are compared with a reference displacement-based FE model with von Kármán strains. Significant difference is observed in the dynamic response of the two models in test cases involving large degrees of beam displacements and rotation. Differences in the contribution of higher order modes substantially affect the frequency-energy dependence and the nonlinear modal interactions observed between the models. It is shown that the SE model, owing to its exact representation of the beam kinematics, is better suited at adequately capturing complex nonlinear dynamics compared to the von Kármán model.
- Open Access
- 17 May 2023
- Published by Springer Nature in Multibody System Dynamics
- Vol. 60 (3) , 375-415
A two-field approach to multibody dynamics of rotating flexible bodies
A two-field version of the floating frame-of-reference approach is developed to describe the dynamics of a flexible body in the case of motion in a uniformly rotating frame. Full decoupling of the kinetic energy results from splitting of the motion into rigid-body modes of the floating center of mass and a velocity field orthogonal to them. The motion equations are developed from a canonical variational expression in which displacement and velocity fields play independent roles. They turn out to keep the same global structure as in the case of motion in an inertial frame. The discretization of all inertia terms is discussed in depth. It is also shown that, in the case of discretization of the continuum with 3D solid elements, all gyroscopic terms can be derived from a mass kernel and associated $\mathbf{S} _{i}$ S i matrices. Model reduction is proposed using the Herting–Martinez method in order to automatically satisfy orthogonality of the velocity field to rigid-body modes. Two application examples of high-speed rotating systems are developed at length to assess the efficiency of the proposed methodology.
- 17 May 2023
- Published by Springer Nature in Multibody System Dynamics
- Vol. 60 (3) , 375-415
Open AccessA two-field approach to multibody dynamics of rotating flexible bodies
A two-field version of the floating frame-of-reference approach is developed to describe the dynamics of a flexible body in the case of motion in a uniformly rotating frame. Full decoupling of the kinetic energy results from splitting of the motion into rigid-body modes of the floating center of mass and a velocity field orthogonal to them. The motion equations are developed from a canonical variational expression in which displacement and velocity fields play independent roles. They turn out to keep the same global structure as in the case of motion in an inertial frame. The discretization of all inertia terms is discussed in depth. It is also shown that, in the case of discretization of the continuum with 3D solid elements, all gyroscopic terms can be derived from a mass kernel and associated $\mathbf{S} _{i}$ S i matrices. Model reduction is proposed using the Herting–Martinez method in order to automatically satisfy orthogonality of the velocity field to rigid-body modes. Two application examples of high-speed rotating systems are developed at length to assess the efficiency of the proposed methodology.
- Open Access
- 3 February 2023
- Published by Springer Nature in Research Square
A Two-field Approach to Multibody Dynamics of Rotating Flexible Bodies
A two-field version of the floating frame of reference approach is developed to describe the dynamics of flexible body in the case of motion in a uniformly rotating frame. Full decoupling of the kinetic energy results from splitting of the motion into rigid body modes of the floating center of mass and a velocity field orthogonal to them. The motion equations are developed from a canonical variational expression in which displacement and velocity fields play independent roles. They turn out to keep the same global structure as in the case of motion in an inertial frame. The discretization of all inertia terms is discussed in depth. It is also shown that, in the case of discretization of the continuum with 3D solid elements, all gyroscopic terms can be derived from a mass kernel and associated Si matrices. Model reduction is proposed using the Herting-Martinez method in order to automatically satisfy orthogonality of the velocity field to rigid body modes. Two application examples of high-speed rotating systems are developed in length to assess the efficiency of the proposed methodology.
- 3 February 2023
- Published by Springer Nature in Research Square
Open AccessA Two-field Approach to Multibody Dynamics of Rotating Flexible Bodies
A two-field version of the floating frame of reference approach is developed to describe the dynamics of flexible body in the case of motion in a uniformly rotating frame. Full decoupling of the kinetic energy results from splitting of the motion into rigid body modes of the floating center of mass and a velocity field orthogonal to them. The motion equations are developed from a canonical variational expression in which displacement and velocity fields play independent roles. They turn out to keep the same global structure as in the case of motion in an inertial frame. The discretization of all inertia terms is discussed in depth. It is also shown that, in the case of discretization of the continuum with 3D solid elements, all gyroscopic terms can be derived from a mass kernel and associated Si matrices. Model reduction is proposed using the Herting-Martinez method in order to automatically satisfy orthogonality of the velocity field to rigid body modes. Two application examples of high-speed rotating systems are developed in length to assess the efficiency of the proposed methodology.
- Open Access
- 29 December 2022
- Published by Springer Nature in Multibody System Dynamics
- Vol. 59 (2) , 239-254
Two-field formulation of the inertial forces of a geometrically-exact beam element
An independent velocity field is introduced via Legendre transformation of the kinetic energy of a geometrically-exact beam, leading to a first-order system of twice as many governing equations as a one-field formulation. Nevertheless, the new field does not have to be assembled across elements and can be eliminated at the element level, so that the assembled system has the same size as a one-field formulation. Furthermore, because the new field does not have to satisfy the compatibility equations that the original velocity field is subjected to, its finite-element discretization is simpler and leads to simplified inertial forces.
- 29 December 2022
- Published by Springer Nature in Multibody System Dynamics
- Vol. 59 (2) , 239-254
Open AccessTwo-field formulation of the inertial forces of a geometrically-exact beam element
An independent velocity field is introduced via Legendre transformation of the kinetic energy of a geometrically-exact beam, leading to a first-order system of twice as many governing equations as a one-field formulation. Nevertheless, the new field does not have to be assembled across elements and can be eliminated at the element level, so that the assembled system has the same size as a one-field formulation. Furthermore, because the new field does not have to satisfy the compatibility equations that the original velocity field is subjected to, its finite-element discretization is simpler and leads to simplified inertial forces.
- 7 January 2022
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 17 (3)
The Motion Formalism for Flexible Multibody Systems
This paper describes a finite element approach to the analysis of flexible multibody systems. It is based on the motion formalism that (1) uses configuration and motion to describe the kinematics of flexible multibody systems, (2) recognizes that these are members of the special Euclidean group thereby coupling their displacement and rotation components, and (3) resolves all tensors components in local frames. The goal of this review paper is not to provide an in-depth derivation of all the elements found in typical multibody codes but rather to demonstrate how the motion formalism (1) provides a theoretical framework that unifies the formulation of all structural elements, (2) leads to governing equations of motion that are objective, intrinsic, and present a reduced order of nonlinearity, (3) improves the efficiency of the solution process, and (4) prevents the occurrence of singularities.
- 7 January 2022
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 17 (3)
The Motion Formalism for Flexible Multibody Systems
This paper describes a finite element approach to the analysis of flexible multibody systems. It is based on the motion formalism that (1) uses configuration and motion to describe the kinematics of flexible multibody systems, (2) recognizes that these are members of the special Euclidean group thereby coupling their displacement and rotation components, and (3) resolves all tensors components in local frames. The goal of this review paper is not to provide an in-depth derivation of all the elements found in typical multibody codes but rather to demonstrate how the motion formalism (1) provides a theoretical framework that unifies the formulation of all structural elements, (2) leads to governing equations of motion that are objective, intrinsic, and present a reduced order of nonlinearity, (3) improves the efficiency of the solution process, and (4) prevents the occurrence of singularities.
- Open Access
- 10 December 2021
- Published by MDPI AG in Applied Mechanics
- Vol. 2 (4) , 1009-1036
Formulation of Shell Elements Based on the Motion Formalism
This paper presents a finite element implementation of plates and shells for the analysis of flexible multibody systems. The developments are set within the framework of the motion formalism that (1) uses configuration and motion to describe the kinematics of flexible multibody systems, (2) couples their displacement and rotation components by recognizing that configuration and motion are members of the Special Euclidean group, and (3) resolves all tensors components in local frames. The formulation based on the motion formalism (1) provides a theoretical framework that streamlines the formulation of shell elements, (2) leads to governing equations of motion that are objective, intrinsic, and present a reduced order of nonlinearity, (3) improves the efficiency of the solution process, (4) circumvents the shear locking phenomenon that plagues shell formulations based on classical kinematic descriptions, and (5) prevents the occurrence of singularities in the treatment of finite rotation. Numerical examples are presented to illustrate the advantageous features of the proposed formulation.
- 10 December 2021
- Published by MDPI AG in Applied Mechanics
- Vol. 2 (4) , 1009-1036
Open AccessFormulation of Shell Elements Based on the Motion Formalism
This paper presents a finite element implementation of plates and shells for the analysis of flexible multibody systems. The developments are set within the framework of the motion formalism that (1) uses configuration and motion to describe the kinematics of flexible multibody systems, (2) couples their displacement and rotation components by recognizing that configuration and motion are members of the Special Euclidean group, and (3) resolves all tensors components in local frames. The formulation based on the motion formalism (1) provides a theoretical framework that streamlines the formulation of shell elements, (2) leads to governing equations of motion that are objective, intrinsic, and present a reduced order of nonlinearity, (3) improves the efficiency of the solution process, (4) circumvents the shear locking phenomenon that plagues shell formulations based on classical kinematic descriptions, and (5) prevents the occurrence of singularities in the treatment of finite rotation. Numerical examples are presented to illustrate the advantageous features of the proposed formulation.