Hajime Okamoto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hajime Okamoto has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Hiroshi Yamaguchi
NTT Basic Research Laboratories, NTT Corporation, Atsugi, Kanagawa 243-0198, Japan
10 shared publications - Motoki Asano
NTT Basic Research Laboratories
6 shared publications - Daiki Hatanaka
NTT Basic Research Laboratories, NTT Corporation, Atsugi, Kanagawa 243-0198, Japan
3 shared publications - Samer Houri
Imec , Leuven
2 shared publications Yoshitaka Taniyasu
2 shared publications- Atsushi Ishizawa
Nihon University
1 shared publication
Latest Publications
- 14 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (11)
A three-modes Kuramoto network in a single nonlinear microelectromechanical device
This work presents a frequency multiplexed 3-limit cycles network in a multimode microelectromechanical nonlinear resonator. The network is composed of libration limit cycles and behaves in an analogous manner to a phase oscillator network. The libration limit cycles interact with each other through the stress tuning of the resonator and result in an all-to-all coupling that can be described by a Kuramoto model. Beyond the typically present cubic nonlinearity, the modes in question do not require any special frequency ratios. Thus, an interconnect free Kuramoto network is established within a single physical device without the need for electrical or optical coupling mechanisms between the individual elements.
- 14 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (11)
A three-modes Kuramoto network in a single nonlinear microelectromechanical device
This work presents a frequency multiplexed 3-limit cycles network in a multimode microelectromechanical nonlinear resonator. The network is composed of libration limit cycles and behaves in an analogous manner to a phase oscillator network. The libration limit cycles interact with each other through the stress tuning of the resonator and result in an all-to-all coupling that can be described by a Kuramoto model. Beyond the typically present cubic nonlinearity, the modes in question do not require any special frequency ratios. Thus, an interconnect free Kuramoto network is established within a single physical device without the need for electrical or optical coupling mechanisms between the individual elements.
- 19 December 2025
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 24 (6)
On-chip magnon-polaron generation in mode-matched cavity magnomechanics
- 19 December 2025
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 24 (6)
On-chip magnon-polaron generation in mode-matched cavity magnomechanics
- Open Access
- 19 September 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (38) , eady4167
Synthesized Kuramoto potential via optomechanical Floquet engineering
Synchronization is a ubiquitous scientific phenomenon in various mesoscopic oscillators. Despite its extensive importance in both nonlinear physics and innovative technologies, their dynamics in laboratory experiments is restricted to a nearly static regime governed by fixed device and system structures. Here, we explore multistable and dynamically tunable synchronization using Floquet engineering technique. Applying a periodically modulated laser light to optomechanical oscillators allows for stable and precise control of oscillator couplings. This enables us to not only explore the physics of quantized integer and fractional phase slips but also synthesize multioctave synchronizations of mechanical oscillators that exhibit tailorable multistability. Furthermore, the dynamically manipulated synchronizations lead to an exotic phase-space trajectory, which has a nontrivial winding number and giant nonreciprocity. This optomechanical Floquet engineering opens up the study of unexplored dynamics in complicated oscillator networks such as biological systems and innovative technology by mimicking their highly efficient information processing.
- 19 September 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (38) , eady4167
Open AccessSynthesized Kuramoto potential via optomechanical Floquet engineering
Synchronization is a ubiquitous scientific phenomenon in various mesoscopic oscillators. Despite its extensive importance in both nonlinear physics and innovative technologies, their dynamics in laboratory experiments is restricted to a nearly static regime governed by fixed device and system structures. Here, we explore multistable and dynamically tunable synchronization using Floquet engineering technique. Applying a periodically modulated laser light to optomechanical oscillators allows for stable and precise control of oscillator couplings. This enables us to not only explore the physics of quantized integer and fractional phase slips but also synthesize multioctave synchronizations of mechanical oscillators that exhibit tailorable multistability. Furthermore, the dynamically manipulated synchronizations lead to an exotic phase-space trajectory, which has a nontrivial winding number and giant nonreciprocity. This optomechanical Floquet engineering opens up the study of unexplored dynamics in complicated oscillator networks such as biological systems and innovative technology by mimicking their highly efficient information processing.
- 5 June 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (13) , 22590-22601
Near-field optomechanical transduction enhanced by Raman gain
Raman-gain-enhanced near-field optomechanical transduction between a movable optical cavity and SiN-membrane resonator is demonstrated. The Raman gain compensates for the intrinsic loss of the cavity and amplifies the optomechanical transduction, through which the membrane vibration is sensed using a high-Q whispering-gallery-mode optical cavity evanescently. The optical Q of the cavity resonance is improved with respect to the optical pump power, which results in an increase in the optomechanically transduced vibration signals of the mechanical resonator. Our near-field optomechanical coupling approach with optical gain realizes highly sensitive displacement measurement in nano- and micro-mechanical resonators consisting of arbitrary materials and structures.
- 5 June 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (13) , 22590-22601
Near-field optomechanical transduction enhanced by Raman gain
Raman-gain-enhanced near-field optomechanical transduction between a movable optical cavity and SiN-membrane resonator is demonstrated. The Raman gain compensates for the intrinsic loss of the cavity and amplifies the optomechanical transduction, through which the membrane vibration is sensed using a high-Q whispering-gallery-mode optical cavity evanescently. The optical Q of the cavity resonance is improved with respect to the optical pump power, which results in an increase in the optomechanically transduced vibration signals of the mechanical resonator. Our near-field optomechanical coupling approach with optical gain realizes highly sensitive displacement measurement in nano- and micro-mechanical resonators consisting of arbitrary materials and structures.
- 18 April 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (18) , 5570-5577
Valley Pseudospin Polarized Evanescent Coupling between Microwave Ring Resonator and Waveguide in Phononic Topological Insulators
A coupled ring-waveguide structure is at the core of bosonic wave-based information processing systems, enabling advanced wave manipulations such as filtering, routing, and multiplexing. However, its miniaturization is challenging due to momentum conservation issues in rings with larger curvature that induce significant backscattering and radiation leakage and hampering stable operation. Here, we address it by taking an alternative approach of using topological technology in wavelength-scale and microwave ring-waveguide coupled systems built in nanoengineered phononic crystals. Our approach, which leverages pseudospin conservation in valley topological systems, eliminates phonon backscattering and achieves directional evanescent coupling. The resultant hypersonic waves in the tiny ring exhibit robust transport and resonant circulation. Furthermore, the ring-waveguide hybridization enables critical coupling, where valley-dependent ring-waveguide interference blocks the transmission. Our findings reveal the capability of topological phenomena for managing ultrahigh-frequency phonons in nano/microscale structures and pave the way for advanced phononic circuits in classical and quantum signal processing applications.
- 18 April 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (18) , 5570-5577
Valley Pseudospin Polarized Evanescent Coupling between Microwave Ring Resonator and Waveguide in Phononic Topological Insulators
A coupled ring-waveguide structure is at the core of bosonic wave-based information processing systems, enabling advanced wave manipulations such as filtering, routing, and multiplexing. However, its miniaturization is challenging due to momentum conservation issues in rings with larger curvature that induce significant backscattering and radiation leakage and hampering stable operation. Here, we address it by taking an alternative approach of using topological technology in wavelength-scale and microwave ring-waveguide coupled systems built in nanoengineered phononic crystals. Our approach, which leverages pseudospin conservation in valley topological systems, eliminates phonon backscattering and achieves directional evanescent coupling. The resultant hypersonic waves in the tiny ring exhibit robust transport and resonant circulation. Furthermore, the ring-waveguide hybridization enables critical coupling, where valley-dependent ring-waveguide interference blocks the transmission. Our findings reveal the capability of topological phenomena for managing ultrahigh-frequency phonons in nano/microscale structures and pave the way for advanced phononic circuits in classical and quantum signal processing applications.
- 18 January 2024
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 132 (3) , 036904
Observation of Acoustically Induced Dressed States of Rare-Earth Ions
Acoustically induced dressed states of long-lived erbium ions in a crystal are demonstrated. These states are formed by rapid modulation of two-level systems via strain induced by surface acoustic waves whose frequencies exceed the optical linewidth of the ion ensemble. Multiple sidebands and the reduction of their intensities appearing near the surface are evidence of a strong interaction between the acoustic waves and the ions. This development allows for on-chip control of long-lived ions and paves the way to highly coherent hybrid quantum systems with telecom photons, acoustic phonons, and electrons.
- 18 January 2024
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 132 (3) , 036904
Observation of Acoustically Induced Dressed States of Rare-Earth Ions
Acoustically induced dressed states of long-lived erbium ions in a crystal are demonstrated. These states are formed by rapid modulation of two-level systems via strain induced by surface acoustic waves whose frequencies exceed the optical linewidth of the ion ensemble. Multiple sidebands and the reduction of their intensities appearing near the surface are evidence of a strong interaction between the acoustic waves and the ions. This development allows for on-chip control of long-lived ions and paves the way to highly coherent hybrid quantum systems with telecom photons, acoustic phonons, and electrons.
- 22 May 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (5) , 054071
Phononic Crystal Cavity Magnomechanics
Phononic crystal (PnC) enables strong confinement of phonons in a wavelength-scale tiny area due to a band gap, which can enhance the interaction with different physical systems. Here, we utilize the PnC to demonstrate local manipulations of magnons by using ultrahigh frequency phonons confined in a phononic cavity, where the tiny and low-loss vibrations excite magnons in a micromagnet via magnetostriction. Moreover, we find that the magnetoelastic interaction is modulated by selectively exciting the cavity resonant modes. The results open up a realm of PnC cavity magnomechanics and will provide universal controls of ultrahigh frequency magnons and phonons with PnC circuits.
- 22 May 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (5) , 054071
Phononic Crystal Cavity Magnomechanics
Phononic crystal (PnC) enables strong confinement of phonons in a wavelength-scale tiny area due to a band gap, which can enhance the interaction with different physical systems. Here, we utilize the PnC to demonstrate local manipulations of magnons by using ultrahigh frequency phonons confined in a phononic cavity, where the tiny and low-loss vibrations excite magnons in a micromagnet via magnetostriction. Moreover, we find that the magnetoelastic interaction is modulated by selectively exciting the cavity resonant modes. The results open up a realm of PnC cavity magnomechanics and will provide universal controls of ultrahigh frequency magnons and phonons with PnC circuits.
- Open Access
- 4 November 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (44) , eabq2502
Free-access optomechanical liquid probes using a twin-microbottle resonator
Cavity optomechanics provides high-performance sensor technology, and the scheme is also applicable to liquid samples for biological and rheological applications. However, previously reported methods using fluidic capillary channels and liquid droplets are based on fixed-by-design structures and therefore do not allow an active free access to the samples. Here, we demonstrate an alternate technique using a probe-based architecture with a twin-microbottle resonator. The probe consists of two microbottle optomechanical resonators, where one bottle (for detection) is immersed in liquid and the other bottle (for readout) is placed in air, which retains excellent detection performance through the high optical Q (~10 7 ) of the readout bottle. The scheme allows the detection of thermomechanical motion of the detection bottle as well as optomechanical drive and frequency tracking with a phase-locked loop. This technique could lead to in situ metrology at the target location in arbitrary media and could be extended to ultrasensitive biochips and rheometers.
- 4 November 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (44) , eabq2502
Open AccessFree-access optomechanical liquid probes using a twin-microbottle resonator
Cavity optomechanics provides high-performance sensor technology, and the scheme is also applicable to liquid samples for biological and rheological applications. However, previously reported methods using fluidic capillary channels and liquid droplets are based on fixed-by-design structures and therefore do not allow an active free access to the samples. Here, we demonstrate an alternate technique using a probe-based architecture with a twin-microbottle resonator. The probe consists of two microbottle optomechanical resonators, where one bottle (for detection) is immersed in liquid and the other bottle (for readout) is placed in air, which retains excellent detection performance through the high optical Q (~10 7 ) of the readout bottle. The scheme allows the detection of thermomechanical motion of the detection bottle as well as optomechanical drive and frequency tracking with a phase-locked loop. This technique could lead to in situ metrology at the target location in arbitrary media and could be extended to ultrasensitive biochips and rheometers.
- 6 December 2021
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 16 (6) , 064015
Self-Sustained Libration Regime in Nonlinear Microelectromechanical Devices
We present a mode of operation for Duffing-type nonlinear microelectromechanical system devices whereby a self-sustained multifrequency output is generated. This self-sustained librator regime creates a limit cycle around a dynamical fixed point, i.e., around fixed points within the rotating frame, whereas a traditional oscillator generates a limit cycle around a static fixed point. The librator limit cycles thus created do not change the global topology of the rotating frame phase space, but are constrained by it. Because of the Duffing nonlinearity, different types of limit cycles could be generated within the same phase space, with each type possessing distinct dynamical features. Transitioning between these limit cycles requires crossing homoclinic bifurcations, which is done without generating chaos as the phase space dynamics are constrained in two dimensions. This work provides an alternative experimental tool for the study of microelectromechanical and nanoelectromechanical system dynamics and their application.
- 6 December 2021
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 16 (6) , 064015
Self-Sustained Libration Regime in Nonlinear Microelectromechanical Devices
We present a mode of operation for Duffing-type nonlinear microelectromechanical system devices whereby a self-sustained multifrequency output is generated. This self-sustained librator regime creates a limit cycle around a dynamical fixed point, i.e., around fixed points within the rotating frame, whereas a traditional oscillator generates a limit cycle around a static fixed point. The librator limit cycles thus created do not change the global topology of the rotating frame phase space, but are constrained by it. Because of the Duffing nonlinearity, different types of limit cycles could be generated within the same phase space, with each type possessing distinct dynamical features. Transitioning between these limit cycles requires crossing homoclinic bifurcations, which is done without generating chaos as the phase space dynamics are constrained in two dimensions. This work provides an alternative experimental tool for the study of microelectromechanical and nanoelectromechanical system dynamics and their application.
- 13 August 2014
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 116 (6)
Energy dissipation in edged and edgeless graphene mechanical resonators
We examined the temperature (T) dependence of the inverse of quality factors (Q−1) of edged and edgeless graphene resonators to evaluate energy dissipation in these resonators. We found that Q−1 in an edgeless drumhead resonator shows a linear T dependence in a wide range of 20–300 K, while that in an edged doubly clamped resonator shows T2 and T0.3 dependence above and below ∼100 K, respectively. On the basis of these experimental results, and by comparing them with the previous experimental and numerical studies, we discuss the energy dissipation mechanisms in these resonators. The dissipation at free edges causes the T0.3 dependence in the lower temperature regime, and tensile strain due to the thermal contraction of the clamped-end metal will lead to the T2 behavior in the higher temperature regime. We demonstrate that elimination of these dissipation sources provides wide-ranging linear-T dependence of Q−1 in our drumhead resonators.
- 13 August 2014
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 116 (6)
Energy dissipation in edged and edgeless graphene mechanical resonators
We examined the temperature (T) dependence of the inverse of quality factors (Q−1) of edged and edgeless graphene resonators to evaluate energy dissipation in these resonators. We found that Q−1 in an edgeless drumhead resonator shows a linear T dependence in a wide range of 20–300 K, while that in an edged doubly clamped resonator shows T2 and T0.3 dependence above and below ∼100 K, respectively. On the basis of these experimental results, and by comparing them with the previous experimental and numerical studies, we discuss the energy dissipation mechanisms in these resonators. The dissipation at free edges causes the T0.3 dependence in the lower temperature regime, and tensile strain due to the thermal contraction of the clamped-end metal will lead to the T2 behavior in the higher temperature regime. We demonstrate that elimination of these dissipation sources provides wide-ranging linear-T dependence of Q−1 in our drumhead resonators.