FDFurkan Nur Deniz

Furkan Nur Deniz

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Furkan Nur Deniz has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental performance analysis of an AMR controlled by a hybrid MPC-PID method

    by Murat Orkan Celik, Murat Koseoglu, Furkan Nur Deniz

    Recent advances in decision-making algorithms used in mobile robotics require more advanced and adaptive control strategies. Model predictive control (MPC) is one of the prominent strategies to manage diverse kinds of complex dynamic systems. Despite their widespread adoption in industrial robotics owing to their structural simplicity and ease of implementation, proportional-integral-derivative (PID) controllers exhibit notable limitations in effectively addressing process variations and system constraints, particularly those arising from mechanical constraints on joint positions and velocities. As autonomous mobile robots (AMRs) have been increasingly deployed in various and demanding applications, the need for more advanced control algorithms has become critical. In this study, a novel hybrid control framework integrating MPC and PID strategies is proposed and experimentally validated on a real-world differential drive robot, aiming to enhance tracking accuracy and overall operational performance. The system model of the TurtleBot3 robot is identified using the System Identification Toolbox and validated through extensive motion tests on the real robot by using Robot Operating System 2. The proposed control scheme combines the predictive capabilities of MPC with the reactive nature of PID to facilitate improved management of system constraints, aiming to improve the performance of AMR in controlling both linear and angular velocities. Experimental results show that the hybrid MPC-PID controller exhibits better performance by reducing tracking errors while maintaining reliability and robustness characteristics over a conventional PID controller. These results demonstrate that the hybrid MPC-PID approach provides a more effective solution for dynamic control tasks in mobile robotic systems, particularly in scenarios requiring high accuracy and reliability.


  • Open Access

    Design of Hybrid MPC-PID Controller Based on Fractional Order Model of AMR

    by Orkan Murat Celik, Furkan Nur Deniz, Murat Koseoglu

    In today’s world, robots, especially autonomous mobile robots (AMR), have critical roles in domestic, medical, and industrial applications. As technology develops and the diverse demands emerge, the tasks to be completed by AMRs become more complex and challenging. AMRs need to be improved to struggle with these difficulties. So, implementing more precise and reliable control strategies for robots is becoming increasingly important. To this end, a novel hybrid control methodology, composed of a Proportional-Integral-Derivative (PID) controller and a model predictive controller (MPC), is proposed based on the fractional-order model of the AMR. The MPC optimizes the reference signal for the PID controller, enhancing overall performance. First, the fractional order model of AMR is extracted by considering the input and output data from AMR at different velocity values, eliminating the need for detailed physical modeling and technical information for AMR. After verifying the obtained model, a model reduction technique is applied to simplify the obtained transfer function to reduce the computational burden on the processor of AMR. Then, based on the simplified transfer function a hybrid MPC-PID controller is designed and implemented on TB3 AMR to improve the robot’s performance. It is demonstrated that the hybrid controller, which is designed without requiring detailed equations of the system components, exhibits a good performance in minimizing errors and enhancing reliability for both angular and linear velocity values.


  • Open Access

    REVISITING BODE’S IDEAL LOOPS: INTEGRAL SQUARE ERROR OPTIMALITY OF BODE’S IDEAL LOOPS AND BODE’S IDEAL LOOP INVERSE CONTROLLER DESIGN

    by Barış Baykant Alagöz, Furkan Nur Deniz, Cemal Keleş

    Bode’s ideal loop models have been utilized in control system designs to obtain performance robustness for the Direct Current (DC) gain variations. However, effects of crossover frequency and fractional order on control optimality of Bode's ideal loop reference models have not been sufficiently discussed, and it may raise a question of whether a control system design based on Bode’s ideal loop reference model is optimal. In this regard, this study revisits Bode’s ideal loops to investigate Integral Square Error (ISE) optimality of Bode’s ideal loops. For this purpose, the ISE optimality of Bode’s ideal loop is theoretically investigated by using Parseval’s theorem, and an ISE optimality condition is suggested in terms of crossover frequency and fractional order. Then, a generic controller family, which achieves an exact matching with the characteristics of the ISE optimal Bode’s ideal loop, was implemented for inverse fractional-order control of a class of minimum phase fractional order plant models. The authors present a numerical experiment on an ISE optimal Bode’s ideal loop inverse (OBILI) controller, and the ISE optimality and performance robustness of the designed control system were investigated for closed-loop control of a heat furnace system model via Monte Carlo simulations.

  • Comparative Performance Evaluation of Fractional Fuzzy Inference System for A High-Order System

    by Mahmut Cengiz, Furkan Nur Deniz, Omerulfaruk Ozguven

    In this study, the effect of the Fractional Fuzzy Inference System (FFIS) on the performance of the fuzzy logic-based control system was examined, with comparisons made to both a typical fuzzy controller and a PID controller. Additionally, a Genetic Algorithm (GA) was utilized to fine-tune the universe of input and output variables for the Fuzzy Logic Controller (FLC) built with FFIS. A high-order system, in which control with classical methods is considered difficult, was chosen to be employed for the performance evaluation. As a result, it has been observed that the use of FFIS in controlling the high-order system leads to a more satisfactory control performance. This study demonstrates that FFIS has the capacity to enhance performance in fuzzy logic-based control systems and can serve as a more effective control strategy.

  • Gradyan İniş Algoritması Kullanarak CFE Tabanlı Yaklaşık Kesirli Dereceli Türev Modellerinin Zaman Cevabının İyileştirilmesi İçin Hibrit Yaklaşım Yöntemi

    by Murat Köseoğlu, Furkan Nur Deni̇z, Barış Baykant ALAGÖZ

    Due to its high computational complexity, fractional order (FO) derivative operators have been widely implemented by using rational transfer function approximation methods. Since these methods commonly utilize frequency domain approximation techniques, their time responses may not be prominent for time-domain solutions. Therefore, time response improvements for the approximate FO derivative models can contribute to real-world performance of FO applications. Recent works address the hybrid use of popular frequency-domain approximation methods and time-domain approximation methods to deal with time response performance problems. In this context, this study presents a hybrid approach that implements Continued Fraction Expansion (CFE) method as frequency domain approximation and applies the gradient descent optimization (GDO) for step response improvement of the CFE-based approximate model of FO derivative operators. It was observed that GDO can fine-tune coefficients of CFE-based rational transfer function models, and this hybrid use can significantly improve step and impulse responses of CFE-based approximate models of derivative operators. Besides, we demonstrate analog circuit realization of this optimized transfer function model of the FO derivative element according to the sum of low pass active filters in Multisim and Matlab simulation environments. Performance improvements of hybrid CFE-GDO approximation method were demonstrated in comparison with the stand-alone CFE method.


  • An effective Smith predictor based fractional-order PID controller design methodology for preservation of design optimality and robust control performance in practice

    by Furkan Nur Deniz

    In this study, an optimal and robust fractional order PID (FOPID) controller design approach is suggested for Smith predictor based FOPID (SP-FOPID) control system design. This new design approach considers continued fraction expansion (CFE) based approximate models in the optimal design task of FOPID controllers, and this approach preserves the design optimality in control applications. For this purpose, an inverse controller loop shaping design methodology is performed in order to approximate the frequency response of a Bode’s ideal loop reference model, and robust performance CFE based FOPID controller models are obtained by solving a multi-objective optimisation problem via a genetic algorithm. Thus, the suggested algorithm can deal with several controller realisation concerns in the design task of FOPID controllers and overcome real-world controller performance issues related with model approximation errors and signal saturation boundaries of electronic hardware. Illustrative design examples demonstrate that the suggested design scheme can preserve design optimality and improve practical control performance in practice.


  • Open Access

    Coefficient Diagram Method Based Decentralized Controller for Fractional Order TITO Systems

    by Furkan Nur Deni̇z, Miray Günay

    Fractional calculus has gained increasing attention from researchers because of providing accurate modelling and flexible controller design in control applications. More research to design controllers for Fractional Order Two-Input Two-Output (FOTITO) systems, which inherently have certain difficulties, is needed when the studies about these control applications are considered. In this study, Coefficient Diagram Method (CDM) based decentralized controllers are designed for FOTITO systems. For this, integer order approximate models of FOTITO systems are obtained and decoupled into two subsystems by using simplified and inverted decoupling configurations. Obtained high-order approximate subsystem transfer functions are reduced by a model reduction method to facilitate CDM-based decentralized controller design. Then, CDM-based decentralized controllers are designed for each subsystem, which enables to obtain the controllers of the FOTITO system. Simulation results for two different FOTITO systems, one of which is a time delay fractional order system, are demonstrated that the proposed approach exhibits successful performance.


  • An experimental analog circuit realization of Matsuda’s approximate fractional-order integral operators for industrial electronics

    by Murat Koseoglu, Furkan Nur Deniz, Baris Baykant Alagoz, Ali Yuce, Nusret Tan

    Analog circuit realization of fractional order (FO) elements is a significant step for the industrialization of FO control systems because of enabling a low-cost, electric circuit realization by means of standard industrial electronics components. This study demonstrates an effective operational amplifier-based analog circuit realization of approximate FO integral elements for industrial electronics. To this end, approximate transfer function models of FO integral elements, which are calculated by using Matsuda’s approximation method, are decomposed into the sum of low-pass filter forms according to the partial fraction expansion. Each partial fraction term is implemented by using low-pass filters and amplifier circuits, and these circuits are combined with a summing amplifier to compose the approximate FO integral circuits. Widely used low-cost industrial electronics components, which are LF347N opamps, resistor and capacitor components, are used to achieve a discrete, easy-to-build analog realization of the approximate FO integral elements. The performance of designed circuit is compared with performance of Krishna’s FO circuit design and performance improvements are shown. The study presents design, performance validation and experimental verification of this straightforward approximate FO integral realization method.


  • Computation of Stabilizing Decentralized PI Controllers for TITO Systems with Simplified and Inverted Decoupling

    by Miray Gunay Bulut, Furkan Nur Deniz

    In this paper, all stabilizing decentralized PI controllers for Two Input-Two Output (TITO) systems using simplified and inverted decoupling methods are calculated in parameter plane. Two Single Input-Single Output (SISO) systems (independent subsystems) are determined from simplified and inverted decoupling configurations and stability regions of both subsystems are calculated in an illustrative example. Test points selected from different regions to examine stability of both subsystems are used to design decentralized PI controllers. Using selected points from intersection of both stability regions provide a limited region to search the controller parameters guaranteeing the stability for both output of TITO systems. In addition to this advantage, a pair of controller parameters with the same values may be sufficient for both decentralized PI controllers.