Jianbo Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianbo Zhu has a total of 106 co-authors. Here are the top co-authors by number of shared publications:
- Jiehe Sui
National Key Laboratory of Precision Hot Forming, Harbin Institute of Technology, Harbin, China
7 shared publications - Yongsheng Zhang
Qufu Normal University
7 shared publications - Zihang Liu
State Key Laboratory of Precision Welding & Joining of Materials and Structures, Harbin Institute of Technology, Harbin, China
7 shared publications Wei Cai
National Key Laboratory of Precision Hot Forming Harbin Institute of Technology Harbin China
6 shared publicationsFengkai Guo
National Key Laboratory for Precision Hot Processing of Metals
4 shared publications- Fengkai Guo
National Key Laboratory of Precision Hot Forming Harbin Institute of Technology Harbin China
3 shared publications
Latest Publications
- 14 November 2026
- Published by Wiley in Advanced Materials
Ultra‐Stable Phosphide Barrier Layer for Thermoelectric Bismuth Telluride
The long‐term reliability of bismuth telluride (BT) thermoelectric power generation devices is severely constrained by the lack of reliable barrier layers. In this work, Ni 2 P is proposed as an ultra‐stable barrier layer for N‐type BT (N–BT). The low thermodynamic driving force for interfacial reaction and the sluggish Ni migration in Ni 2 P together ensure the favorable chemical inertness of the Ni 2 P/N–BT interface, while atomic‐scale bonding endows the interface with high bonding energy, leading to the lowest interfacial contact resistivity (∼1 µΩ cm 2 ), highest bonding strength (∼20 MPa), and longest verified stable duration at 523 K (90 days) among reported barrier layer systems. The resulting seven‐pair BT thermoelectric device achieves a maximum energy conversion efficiency of 6.9% at a temperature difference of 230 K. This work not only addresses the long‐standing bottleneck in power generation applications of BT‐based devices since the 1950s, but also provides guidance for barrier layer design in other thermoelectric systems.
- 14 November 2026
- Published by Wiley in Advanced Materials
Ultra‐Stable Phosphide Barrier Layer for Thermoelectric Bismuth Telluride
The long‐term reliability of bismuth telluride (BT) thermoelectric power generation devices is severely constrained by the lack of reliable barrier layers. In this work, Ni 2 P is proposed as an ultra‐stable barrier layer for N‐type BT (N–BT). The low thermodynamic driving force for interfacial reaction and the sluggish Ni migration in Ni 2 P together ensure the favorable chemical inertness of the Ni 2 P/N–BT interface, while atomic‐scale bonding endows the interface with high bonding energy, leading to the lowest interfacial contact resistivity (∼1 µΩ cm 2 ), highest bonding strength (∼20 MPa), and longest verified stable duration at 523 K (90 days) among reported barrier layer systems. The resulting seven‐pair BT thermoelectric device achieves a maximum energy conversion efficiency of 6.9% at a temperature difference of 230 K. This work not only addresses the long‐standing bottleneck in power generation applications of BT‐based devices since the 1950s, but also provides guidance for barrier layer design in other thermoelectric systems.
- Open Access
- 19 October 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Laminated structure design accommodates thermal expansion mismatch for mechanically and thermally dual-stable thermoelectric contacts
The quality of the barrier layer (BL) directly determines the long-term stability of thermoelectric (TE) modules. Conventional BLs struggle to simultaneously achieve thermal expansion matching with TE materials and robust diffusion-blocking capability. Here we show a bimetallic multilayer BL strategy that ensures thermal expansion matching while constructing a controllable interfacial stress field to inhibit element diffusion. Taking skutterudite (SKD) as an example, we construct a BL with alternating Nb and Cu layers, in which Nb serves as the primary diffusion barrier, while Cu tailors the effective thermal expansion behavior and regulates the stress field at the SKD/Nb interface via Nb/Cu back stress, thereby achieving mechanical stability and a strong diffusion-blocking effect. After aging at 823 K for 60 days, the SKD/Nb-Cu interface remains intact and maintains a low contact resistivity ( < 1 μΩ·cm²). Furthermore, the strategy proves effective in Bi2Te3- and GeTe-based TE systems, demonstrating its universality.
- 19 October 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessLaminated structure design accommodates thermal expansion mismatch for mechanically and thermally dual-stable thermoelectric contacts
The quality of the barrier layer (BL) directly determines the long-term stability of thermoelectric (TE) modules. Conventional BLs struggle to simultaneously achieve thermal expansion matching with TE materials and robust diffusion-blocking capability. Here we show a bimetallic multilayer BL strategy that ensures thermal expansion matching while constructing a controllable interfacial stress field to inhibit element diffusion. Taking skutterudite (SKD) as an example, we construct a BL with alternating Nb and Cu layers, in which Nb serves as the primary diffusion barrier, while Cu tailors the effective thermal expansion behavior and regulates the stress field at the SKD/Nb interface via Nb/Cu back stress, thereby achieving mechanical stability and a strong diffusion-blocking effect. After aging at 823 K for 60 days, the SKD/Nb-Cu interface remains intact and maintains a low contact resistivity ( < 1 μΩ·cm²). Furthermore, the strategy proves effective in Bi2Te3- and GeTe-based TE systems, demonstrating its universality.
- 27 March 2026
- Published by Springer Nature in Nature Materials
Anodic protection enables moisture-stable Mg3(Sb, Bi)2 for thermoelectric cooling
Mg3(Sb, Bi)2 is the most promising candidate as a next-generation thermoelectric cooling material; however, its application is bottlenecked by poor moisture stability. We demonstrate a protection strategy for Mg3(Sb, Bi)2 by constructing anodic phases that are preferentially corroded to protect the cathodic material matrix, as enabled by the in situ formation of uniformly distributed multiscale anodic phases based on a large Pilling-Bedworth ratio, low equilibrium potential, high chemical inertness and rapid oxide/hydroxide coverage ability. Mg17Al12 preferentially corrodes and promotes the formation of a protective film, reducing the average corrosion rate of Mg3(Sb, Bi)2 by 92% to ~95 μm year-1 in air and 86% to ~0.36 μm h-1 in water, achieving excellent corrosion resistance. The cooling performance of the fabricated module is comparable with that of commercial bismuth telluride modules at 300 K, and exceeds them at 325 K and 350 K. Meanwhile, no performance degradation is observed after 28-day aging at 350 K and 70% relative humidity. Our study addresses the issues of moisture stability of Mg3(Sb, Bi)2 during storage, processing and application, and could be extended to other aqueous vapour-sensitive materials.
- 27 March 2026
- Published by Springer Nature in Nature Materials
Anodic protection enables moisture-stable Mg3(Sb, Bi)2 for thermoelectric cooling
Mg3(Sb, Bi)2 is the most promising candidate as a next-generation thermoelectric cooling material; however, its application is bottlenecked by poor moisture stability. We demonstrate a protection strategy for Mg3(Sb, Bi)2 by constructing anodic phases that are preferentially corroded to protect the cathodic material matrix, as enabled by the in situ formation of uniformly distributed multiscale anodic phases based on a large Pilling-Bedworth ratio, low equilibrium potential, high chemical inertness and rapid oxide/hydroxide coverage ability. Mg17Al12 preferentially corrodes and promotes the formation of a protective film, reducing the average corrosion rate of Mg3(Sb, Bi)2 by 92% to ~95 μm year-1 in air and 86% to ~0.36 μm h-1 in water, achieving excellent corrosion resistance. The cooling performance of the fabricated module is comparable with that of commercial bismuth telluride modules at 300 K, and exceeds them at 325 K and 350 K. Meanwhile, no performance degradation is observed after 28-day aging at 350 K and 70% relative humidity. Our study addresses the issues of moisture stability of Mg3(Sb, Bi)2 during storage, processing and application, and could be extended to other aqueous vapour-sensitive materials.
- 8 October 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (45) , 41629-41638
Boosting Thermoelectric Properties of High-Entropy Chalcogenides through Local Structural Distortion and Tailored Chemical Bonding
Controlling the local structure of high-entropy materials offers a promising pathway to resolve the trade-off of electron and phonon transport behaviors, which unlocks their full potential in thermoelectric applications. Herein, utilizing time-of-flight neutron total scattering and advanced multiscale simulations, we unveil the intricate local structures spanning both short- and long-range scales in high-entropy chalcogenides AgMnPbSbTe4 and AgMnGePbSbTe5, characterized by pronounced long-range cation disordering and well-defined short-range ordering. Notably, pair distribution function refinements revealed substantial discrepancies near 3 Å, unequivocally indicating significant local distortions from PbTe. Besides enhancing Pb-site asymmetry, the high-entropy strategy also triggers chemical bonding evolutions from purely ionic interactions in PbTe to mixed covalent-ionic features in AgMnPbSbTe4, and ultimately to more robust covalent-ionic interactions in AgMnGePbSbTe5. This transformation produces a 3-fold enhancement in electrical conductivity for AgMnGePbSbTe5 relative to AgMnPbSbTe4, and an orders-of-magnitude improvement over PbTe. Due to the enhanced covalent character imparted by Ge-Te bonding and weakened local octahedral structural distortions with long-ranged scales, the lattice thermal conductivity of AgMnGePbSbTe5 surpasses that of AgMnPbSbTe4 across the entire temperature range. By optimizing high-entropy materials from the local chemical order, we achieve a maximum ZT of 1.66 at 750 K in pure AgMnGePbSbTe5, significantly outperforming intrinsic PbTe (∼ 0.26 at 720 K) and other PbTe-based composites. Our findings not only elucidate the underlying mechanisms governing the anomalously low thermal conductivity in high-entropy materials but also establish a correlation between local structural distortions and thermoelectric performance, thereby providing critical insights for the rational design of next-generation thermoelectric materials.
- 8 October 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (45) , 41629-41638
Boosting Thermoelectric Properties of High-Entropy Chalcogenides through Local Structural Distortion and Tailored Chemical Bonding
Controlling the local structure of high-entropy materials offers a promising pathway to resolve the trade-off of electron and phonon transport behaviors, which unlocks their full potential in thermoelectric applications. Herein, utilizing time-of-flight neutron total scattering and advanced multiscale simulations, we unveil the intricate local structures spanning both short- and long-range scales in high-entropy chalcogenides AgMnPbSbTe4 and AgMnGePbSbTe5, characterized by pronounced long-range cation disordering and well-defined short-range ordering. Notably, pair distribution function refinements revealed substantial discrepancies near 3 Å, unequivocally indicating significant local distortions from PbTe. Besides enhancing Pb-site asymmetry, the high-entropy strategy also triggers chemical bonding evolutions from purely ionic interactions in PbTe to mixed covalent-ionic features in AgMnPbSbTe4, and ultimately to more robust covalent-ionic interactions in AgMnGePbSbTe5. This transformation produces a 3-fold enhancement in electrical conductivity for AgMnGePbSbTe5 relative to AgMnPbSbTe4, and an orders-of-magnitude improvement over PbTe. Due to the enhanced covalent character imparted by Ge-Te bonding and weakened local octahedral structural distortions with long-ranged scales, the lattice thermal conductivity of AgMnGePbSbTe5 surpasses that of AgMnPbSbTe4 across the entire temperature range. By optimizing high-entropy materials from the local chemical order, we achieve a maximum ZT of 1.66 at 750 K in pure AgMnGePbSbTe5, significantly outperforming intrinsic PbTe (∼ 0.26 at 720 K) and other PbTe-based composites. Our findings not only elucidate the underlying mechanisms governing the anomalously low thermal conductivity in high-entropy materials but also establish a correlation between local structural distortions and thermoelectric performance, thereby providing critical insights for the rational design of next-generation thermoelectric materials.
- 21 March 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (7) , 2629-2641
Boosting the Thermoelectric Properties of Textured BiSbSe3 via Versatile CuI Compositing
- 21 March 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (7) , 2629-2641
Boosting the Thermoelectric Properties of Textured BiSbSe3 via Versatile CuI Compositing
- 26 February 2025
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 12 (1)
Anomalous thermal transport in semiconductors induced by aliovalent doping
As an effective method for thermal management technologies, doping or substitution has been extensively utilized to reduce the lattice thermal conductivity of various materials. Intensive studies have been conducted about the phonon mechanism of isoelectronic alloying since the 1950s. Very recently, the specific role of aliovalent doping was elucidated in the half-Heusler NbFeSb system. Here, we have theoretically and experimentally investigated the mechanism of reducing thermal conductivity through aliovalent doping by combining first-principles calculations and neutron diffraction studies for the case study of the TiCoSb half-Heusler system. The softening of the acoustic branches induced by aliovalent doping can effectively reduce the phonon group velocities. Moreover, the introduction of compensating defects, resulting from changes in the Fermi level, plays a vital role in decreasing the relaxation time of phonons, as demonstrated by the analysis of neutron powder diffraction. Due to these two factors, doping with adjacent elements results in a significant reduction in lattice thermal conductivity (for instance, Ni doping at the Co site in the TiCoSb half-Heusler system), especially in the low-temperature range. Our findings provide valuable insight into the phonon scattering mechanism in aliovalent-doped materials and demonstrate the role of compensating defects in heat transport, which is applicable to other doped semiconductor systems.
- 26 February 2025
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 12 (1)
Anomalous thermal transport in semiconductors induced by aliovalent doping
As an effective method for thermal management technologies, doping or substitution has been extensively utilized to reduce the lattice thermal conductivity of various materials. Intensive studies have been conducted about the phonon mechanism of isoelectronic alloying since the 1950s. Very recently, the specific role of aliovalent doping was elucidated in the half-Heusler NbFeSb system. Here, we have theoretically and experimentally investigated the mechanism of reducing thermal conductivity through aliovalent doping by combining first-principles calculations and neutron diffraction studies for the case study of the TiCoSb half-Heusler system. The softening of the acoustic branches induced by aliovalent doping can effectively reduce the phonon group velocities. Moreover, the introduction of compensating defects, resulting from changes in the Fermi level, plays a vital role in decreasing the relaxation time of phonons, as demonstrated by the analysis of neutron powder diffraction. Due to these two factors, doping with adjacent elements results in a significant reduction in lattice thermal conductivity (for instance, Ni doping at the Co site in the TiCoSb half-Heusler system), especially in the low-temperature range. Our findings provide valuable insight into the phonon scattering mechanism in aliovalent-doped materials and demonstrate the role of compensating defects in heat transport, which is applicable to other doped semiconductor systems.
- 15 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (10) , 4376-4384
Low Thermal Conductivity Induced Thermoelectric Improvement in Pristine SnTe via High-Pressure Engineering
- 15 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (10) , 4376-4384
Low Thermal Conductivity Induced Thermoelectric Improvement in Pristine SnTe via High-Pressure Engineering
- 15 February 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (24)
Design of High‐Performance Cubic N‐Type AgBiSe2 Guided by Metavalent Bonding Mechanism
AgBiSe2 undergoes two structural transitions in its service temperature range. Increasing entropy by alloying is considered an effective solution for modulating phase transition, but the efficacy of increasing entropy is limited by solubility and the selection of alloying components depends on trial and error. This study first confirmes that trigonal AgBiSe2 is metavalently bonded and searches metavalent PbTe as the alloying material based on the 2D map spanned by quantitative chemical bonding descriptors of electrons transferred (ET) and electrons shared (ES). The large solubility can be explained by the same bonding mechanism. PbTe alloying successfully stabilizes cubic AgBiSe2 to room temperature. Further, by optimizing the carrier concentration, the average ZT value from 300 to 773 K of (AgBiSe2)0.7(PbTe)0.3Cu0.02 reaches 0.42, which is 40% higher than that of pristine AgBiSe2. Simultaneously, heavy alloying leads to solid solution strengthening with enhanced hardness. This study not only paves the way for practical applications of AgBiSe2‐based materials but also provides an effective strategy for screening potential alloying candidates to solve the structure‐transition issue from the viewpoint of chemical bonding.
- 15 February 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (24)
Design of High‐Performance Cubic N‐Type AgBiSe2 Guided by Metavalent Bonding Mechanism
AgBiSe2 undergoes two structural transitions in its service temperature range. Increasing entropy by alloying is considered an effective solution for modulating phase transition, but the efficacy of increasing entropy is limited by solubility and the selection of alloying components depends on trial and error. This study first confirmes that trigonal AgBiSe2 is metavalently bonded and searches metavalent PbTe as the alloying material based on the 2D map spanned by quantitative chemical bonding descriptors of electrons transferred (ET) and electrons shared (ES). The large solubility can be explained by the same bonding mechanism. PbTe alloying successfully stabilizes cubic AgBiSe2 to room temperature. Further, by optimizing the carrier concentration, the average ZT value from 300 to 773 K of (AgBiSe2)0.7(PbTe)0.3Cu0.02 reaches 0.42, which is 40% higher than that of pristine AgBiSe2. Simultaneously, heavy alloying leads to solid solution strengthening with enhanced hardness. This study not only paves the way for practical applications of AgBiSe2‐based materials but also provides an effective strategy for screening potential alloying candidates to solve the structure‐transition issue from the viewpoint of chemical bonding.
- Open Access
- 24 January 2024
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 11 (1)
Crystal-liquid duality driven ultralow two-channel thermal conductivity in α-MgAgSb
The desire for intrinsically low lattice thermal conductivity (κL) in thermoelectrics motivates numerous efforts on understanding the microscopic mechanisms of heat transport in solids. Here, based on theoretical calculations, we demonstrate that α-MgAgSb hosts low-energy localized phonon bands and avoided crossing of the rattler modes, which coincides with the inelastic neutron scattering result. Using the two-channel lattice dynamical approach, we find, besides the conventional contribution (∼70% at 300 K) from particlelike phonons propagating, the coherence contribution dominated by the wavelike tunneling of phonons accounts for ∼30% of the total κL at 300 K. By considering dual contributions, our calculated room-temperature κL of 0.64 W m−1 K−1 well agrees with the experimental value of 0.63 W m−1 K−1. More importantly, our computations give a nonstandard κL ∝ T−0.61 dependence, perfectly explaining the abnormal temperature-trend of ∼T−0.57 in experiment for α-MgAgSb. By molecular dynamics simulation, we reveal that the structure simultaneously has soft crystalline sublattices with the metavalent bonding and fluctuating liquid-like sublattices with thermally induced large amplitude vibrations. These diverse forms of chemical bonding arouse mixed part-crystal part-liquid state, scatter strongly heat-carrying phonons, and finally produce extremely low κL. The fundamental research from this study will accelerate the design of ultralow-κL materials for energy-conversion applications.
- 24 January 2024
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 11 (1)
Open AccessCrystal-liquid duality driven ultralow two-channel thermal conductivity in α-MgAgSb
The desire for intrinsically low lattice thermal conductivity (κL) in thermoelectrics motivates numerous efforts on understanding the microscopic mechanisms of heat transport in solids. Here, based on theoretical calculations, we demonstrate that α-MgAgSb hosts low-energy localized phonon bands and avoided crossing of the rattler modes, which coincides with the inelastic neutron scattering result. Using the two-channel lattice dynamical approach, we find, besides the conventional contribution (∼70% at 300 K) from particlelike phonons propagating, the coherence contribution dominated by the wavelike tunneling of phonons accounts for ∼30% of the total κL at 300 K. By considering dual contributions, our calculated room-temperature κL of 0.64 W m−1 K−1 well agrees with the experimental value of 0.63 W m−1 K−1. More importantly, our computations give a nonstandard κL ∝ T−0.61 dependence, perfectly explaining the abnormal temperature-trend of ∼T−0.57 in experiment for α-MgAgSb. By molecular dynamics simulation, we reveal that the structure simultaneously has soft crystalline sublattices with the metavalent bonding and fluctuating liquid-like sublattices with thermally induced large amplitude vibrations. These diverse forms of chemical bonding arouse mixed part-crystal part-liquid state, scatter strongly heat-carrying phonons, and finally produce extremely low κL. The fundamental research from this study will accelerate the design of ultralow-κL materials for energy-conversion applications.
- 15 November 2023
- Published by American Physical Society (APS) in Physical Review B
- Vol. 108 (19) , 195203
Bonding properties of Rubik's-cube-like Slater-Pauling Heusler semiconductors for thermoelectrics
Heusler compounds [XYZ for half-Heusler (HH) and for full-Heusler (FH)] with semiconducting behaviors have been long suggested as promising high-performance thermoelectric (TE) materials. Recently, some off-stoichiometry Heusler compounds (such as the mixture of HH and FH compounds) were predicted as semiconductors as well, which disobey the traditional valence electron count rule and are named Slater-Pauling (S-P) semiconductors. However, the bonding behaviors in these S-P semiconductors and the relationship between the geometry and TE properties are still unclear. Therefore, focusing on the Ti-Fe-Sb and -Co-Sn (, Zr, Hf) Heusler systems, we theoretically predict several thermodynamically stable off-stoichiometry Heusler compounds ( and ) and clarify the bonding behaviors of those S-P semiconductors. From the geometry analysis of these compounds, in addition to the HH and FH local geometries, the disorder occupation of Y atoms (Fe or Co) in the lattice also induces the defective-HH and defective-FH substructures, and the stacking style forms second- and third-order Rubik's-cube-like structures. This unique stacking arrangement (or the Y occupations) not only plays an essential role in the electron redistribution in the lattice to form the band gap but also lowers the acoustic Debye temperature and strengthens the anharmonic to suppress the lattice thermal conductivity. Owing to the high power factor and low thermal conductivity, the calculated value of -type can reach 0.54 at 1000 K. This value could be further optimized using defect engineering. Thus, we not only elucidate the underlying mechanism behind the emergence of S-P semiconductors in Heusler systems but also offer valuable insight into experimental exploration and discovery of S-P semiconductors exhibiting superior TE performance.- 15 November 2023
- Published by American Physical Society (APS) in Physical Review B
- Vol. 108 (19) , 195203
Bonding properties of Rubik's-cube-like Slater-Pauling Heusler semiconductors for thermoelectrics
Heusler compounds [XYZ for half-Heusler (HH) and for full-Heusler (FH)] with semiconducting behaviors have been long suggested as promising high-performance thermoelectric (TE) materials. Recently, some off-stoichiometry Heusler compounds (such as the mixture of HH and FH compounds) were predicted as semiconductors as well, which disobey the traditional valence electron count rule and are named Slater-Pauling (S-P) semiconductors. However, the bonding behaviors in these S-P semiconductors and the relationship between the geometry and TE properties are still unclear. Therefore, focusing on the Ti-Fe-Sb and -Co-Sn (, Zr, Hf) Heusler systems, we theoretically predict several thermodynamically stable off-stoichiometry Heusler compounds ( and ) and clarify the bonding behaviors of those S-P semiconductors. From the geometry analysis of these compounds, in addition to the HH and FH local geometries, the disorder occupation of Y atoms (Fe or Co) in the lattice also induces the defective-HH and defective-FH substructures, and the stacking style forms second- and third-order Rubik's-cube-like structures. This unique stacking arrangement (or the Y occupations) not only plays an essential role in the electron redistribution in the lattice to form the band gap but also lowers the acoustic Debye temperature and strengthens the anharmonic to suppress the lattice thermal conductivity. Owing to the high power factor and low thermal conductivity, the calculated value of -type can reach 0.54 at 1000 K. This value could be further optimized using defect engineering. Thus, we not only elucidate the underlying mechanism behind the emergence of S-P semiconductors in Heusler systems but also offer valuable insight into experimental exploration and discovery of S-P semiconductors exhibiting superior TE performance.