SSSubhankar Saha

Subhankar Saha

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Subhankar Saha has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Multi-Response Optimization of EDM Parameters for Complex Surface Removal of Al 6061

    by Rashed Mustafa Mazarbhuiya, Subhankar Saha, Maneswar Rahang, Dhinakaran Veeman

    The present investigation explored an innovative approach for complex surface removal selectively using the electric discharge machining (EDM) process. The parametric effects on the selective material removal of the Al 6061 surface is performed by modified mild steel tool electrode, where the influence of peak current, pulse on-time and pulse off-time on the output responses such as TWR, MRR, Ra and ED was evaluated. The outcomes of this investigation demonstrated that the TWR, MRR, Ra and ED increase with an increase in [Formula: see text] and [Formula: see text] whereas they decrease with a decrease in pulse off-time. [Formula: see text] has a significant contribution of 50.97% for TWR, 59.02% for MRR, 56.88% for Ra and 54.50% for ED, as per ANOVA results. The optimal parameter selection is done using the multi-criteria decision-making TOmada de Decisão Interativa Multicritério (TODIM) method. For equal weightages of all the output responses, the common optimum condition is obtained at 6A of [Formula: see text] 400 [Formula: see text]s of [Formula: see text] and 75 [Formula: see text]s of [Formula: see text].

  • A parametric study of laser beam welding of dissimilar AISI 316L and AA6061 joints

    by Amit Ratan Biswas, Rashed Mustafa Mazarbhuiya, Subhankar Saha, Prosun Mandal, Saikat Ranjan Maity


  • Machine learning based optimization of micro-electro discharge milling responses of AZ91 magnesium alloy for biomedical applications

    by Subhankar Saha, Satish Chaurasia, Rashed Mustafa Mazarbhuiya, Ambika Swargiary, Saikat Ranjan Maity, Sudip Dey, Kishore Debnath

    Enhancing the surface characteristics of biomedical implants is crucial for increasing their compatibility with biological implants and minimizing their corrosion rate. Despite the possibility of such surface alterations, micro electro discharge (μED) milling has not been widely used in this area. This study examines the processing of biodegradable magnesium alloy using μED milling, with an emphasis on analysing machining time (MT) and surface roughness (Ra). The impact of pulse on-time (T on ), voltage (V) and tool rotational speed (TRS) is assessed using Spearman correlation coefficient plots to determine their effects on the responses. Four machine learning (ML) methods viz. support vector regression (SVR), extreme gradient boosting (XGB), Random Forest (RF) and Gaussian Process Regression (GPR) are utilized to forecast these outcomes. Among these ML methods GPR exhibits the highest accuracy in predicting outcomes for the collected data. A parametric analysis is conducted using GPR based ML model. The process parameters are then optimized by a preference-based Marine Predators Algorithm (PBMPA) to attain Pareto optimum settings. The optimized surface is analysed using scanning electron microscopy revealing structural characteristics that endorse their use in feasibility for biodegradable medical implant applications.


  • Complex-Shaped Tool Fabrication using Powder Metallurgy in EDM

    by Rashed Mustafa Mazarbhuiya, Maneswar Rahang, Subhankar Saha, Dhinakaran Veeman

    This paper presents an innovative technique for fabricating complex-shaped powder metallurgical (PM) tool electrodes using electrical discharge machining (EDM). This approach enhances design flexibility in tool fabrication, enabling selective surface treatments and pattern generation. The tool made of 75% tungsten (W) and 25% copper (Cu), is compacted and pasted to a copper shank by conductive materials. The tool design is initially generated using AutoCAD software and processed on the wire-cut EDM machine. The final tool is then produced through die-sinking EDM operations in reverse polarity. Key input parameters include compact load (CL), peak current ([ ][ ]) and pulse on-time (Ton), while the output responses are tool wear rate (TWR), unwanted material transfer rate (MTRU) and edge deviation (ED). The study reports several significant numerical findings related to the fabrication of complex-shaped PM tool electrodes using the EDM process. These parameters lead to notable performance outcomes, with a minimum TWR of 10.14 mg/min, MTRU of 1.56 mg/min and ED of 18.71 [ ]m, showcasing the effectiveness of the process in achieving the desired tool characteristics. The process offers an efficient solution for producing complex geometries suitable for different applications.


  • Parametric study on selective surface modification in EDM using TOPSIS

    by Rashed Mustafa Mazarbhuiya, Maneswar Rahang, Subhankar Saha, Dhinakaran Veeman

    This study investigates pattern generation by selective surface modification through the analysis of individual machining parameters and Multi Criteria Decision Making (MCDM) method specifically TOPSIS to optimize output parameters based on the weightage of the responses. The results reveal that TWR and MDR rise with I p and T on at any CL of the green compact tool. Similarly, the Ra and ED increase with an increase in I p and T on at any CL setting. With equal weightage for all responses, the optimal setting is at CL 10 ton, I p 3 A, T on 400 µs, resulting in TWR 75.19 mg/min, MDR 6.59 mg/min, Ra 6.10 µm and ED 49.53 µm. Whereas, for weightage of 40% for Ra and ED and 10% for TWR and MDR, the optimal setting is CL 15 ton, I p 2 A, T on 100 µs, with TWR 50.21 mg/min, MDR 1.95 mg/min, Ra 3.67 µm and ED 35.44 µm. Surface characterization via FESEM confirms particle transfer and clustering under low-energy conditions, while random deposition occurs at higher energy levels. EDS and mapping analysis further confirm tool particle transfer, which enhances mechanical and physical properties.


  • EDC of graphite using powder metallurgical green compact W-Cu tools

    by Rashed Mustafa Mazarbhuiya, Maneswar Rahang, Subhankar Saha, Dhinakaran Veeman


  • Exploring the machining characteristics of aluminum 6061 using nanosecond pulse fiber laser machine

    by Guddakesh Kumar Chandan, Mohd Aslam, Subhankar Saha, Brajesh Kumar Kanchan

    The present study aims to probe the influence of nanosecond laser parameters on the surface quality of aluminum material (Al 6061) using a full factorial design approach. Additionally, the study utilizes the Harris Hawks optimization (HHO) algorithm to determine the optimized laser parameters for achieving desirable surface features on straight-cut aluminum samples. Subsequently, the machined samples are analyzed through optical microscopy, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The evaluation criteria for the present study are taper, surface roughness, and heat-affected zone (HAZ) thickness. The results revealed that average laser power significantly impacted the taper (17.01%), and scanning speed contributed significantly to the taper (26.62%). The average power and scanning speed combined showed the most substantial influence on taper (47.76%). Furthermore, the average power had the most significant effect on the heat-affected zone (77.76%) and surface roughness (SR) (72.22%). The optimal conditions determined by the HHO were a pulse frequency of 100 Hz, a scanning speed of 10 mm/s, and an average power of 40 W, resulting in heat-affected zone = 36.047, surface roughness = 5.496, and taper angle = 23.188. These findings hold significant implications for enhancing the surface characteristics of aluminum in laser machining processes, thereby benefiting industries such as aerospace, automotive, and electronics.


  • Probabilistic investigation of geometric responses in Wire EDM machined complex-shaped profile: A machine learning based approach

    by Subhankar Saha, Kritesh Kumar Gupta, Saikat Ranjan Maity, Sudip Dey

    Wire electric discharge machining (WEDM) has gained tremendous market share due to its potential to create complex profiles and ease in machining exotic materials. The inherent problem of wire lag, however, has a significant impact on the accuracy and precision of complex profiles in WEDM. Furthermore, if parametric uncertainties are not taken into account during machining of complex profiles, problems like geometrical inaccuracy and imprecision are likely to worsen. Hence, in the present study, we focused on the role of parametric uncertainties on geometrical parameters such as corner error (CE) and undercut (UC) of complicated profile. In this regard, the machine learning (ML) driven framework is proposed, wherein the Gaussian process regression model is integrated with the experimental responses gathered from the WEDM. The sample-space to train and validate the ML model is constructed by performing the WEDM for the experimental plan, which is designed on the basis of face-centered central composite design. The constructed ML model is rigorously tested and validated to ensure its predictive accuracy. The ML-based WEDM framework is further extended to perform data-driven uncertainty quantification and sensitivity analysis to reveal the likelihood of variations in geometrical precision due to inherent parametric uncertainties. The constructed model is further deployed for the data-driven sensitivity analysis and to reveal the probabilistic behavior of responses in the presence of parametric uncertainties. The results of this study will help to develop and expand the WEDM robust control technique.