He Shen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
He Shen has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Wenfeng Guo
College of Agricultural Equipment and Energy Engineering, Northeast Agricultural University, Harbin 150030, China
3 shared publications - Yan Li
College of Agricultural Equipment and Energy Engineering, Northeast Agricultural University, Harbin 150030, China
3 shared publications - Kotaro Tagawa
Faculty of Agriculture, Tottori University, Tottori 680-8553, Japan
1 shared publication - Zhongqiu Mu
College of Engineering, Northeast Agricultural University, Harbin 150030, China
1 shared publication
Latest Publications
- Open Access
An Experimental Study on Adhesion Strength of Offshore Atmospheric Icing on a Wind Turbine Blade Airfoil
When wind turbines work in a cold and humid environment, especially offshore condition, ice accretion on the blade surfaces has a negative effect on the aerodynamic performance. In order to remove the ice from the wind turbine blade, the adhesive characteristics of atmospheric icing on the blade surface should be mastered under various conditions. The objective of this study is to evaluate the effects of offshore atmospheric conditions, including wind speeds, ambient temperatures and, especially, the salt contents on ice adhesion strength for wind turbine blades. The experiments were conducted on a NACA0018 blade airfoil under conditions including an ambient temperature of −3 °C~−15 °C, wind speed of 6 m/s~15 m/s and salt content of 1~20 mg/m3. The results showed that salt content was the most important factor affecting the ice adhesion strength, followed by ambient temperature and wind speed. The interactive effect of wind speed and salt content, ambient temperature and salt content were extremely significant. The research can provide a reference for the anti-icing for offshore wind turbines.
Open AccessAn Experimental Study on Adhesion Strength of Offshore Atmospheric Icing on a Wind Turbine Blade Airfoil
When wind turbines work in a cold and humid environment, especially offshore condition, ice accretion on the blade surfaces has a negative effect on the aerodynamic performance. In order to remove the ice from the wind turbine blade, the adhesive characteristics of atmospheric icing on the blade surface should be mastered under various conditions. The objective of this study is to evaluate the effects of offshore atmospheric conditions, including wind speeds, ambient temperatures and, especially, the salt contents on ice adhesion strength for wind turbine blades. The experiments were conducted on a NACA0018 blade airfoil under conditions including an ambient temperature of −3 °C~−15 °C, wind speed of 6 m/s~15 m/s and salt content of 1~20 mg/m3. The results showed that salt content was the most important factor affecting the ice adhesion strength, followed by ambient temperature and wind speed. The interactive effect of wind speed and salt content, ambient temperature and salt content were extremely significant. The research can provide a reference for the anti-icing for offshore wind turbines.
- Open Access
- 24 February 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (5) , 2357
Effect of Ultrasonic Vibration on the Surface Adhesive Characteristic of Iced Aluminum Alloy Plate
Icings on moving machinery, such as wind turbines and aircraft wings, degrade their performance and safety. Ultrasonic vibration is considered one of the deicing methods. In this research, simulations and experiments are carried out to explore the effect of ultrasonic vibration on the adhesive characteristic of ice on aluminum alloy plates. Harmonic response analyses are conducted to analyze the changing and distributions of shear stresses at the adhesive interface under different frequencies and sizes of PZT patches. The results show that there is optimum side length and thickness of the PZT patch, as the size of the iced aluminum alloy plate is constant. In these conditions, the shear stresses at the adhesive interface are high. Then, experiments on adhesive torque of ice are carried out to calculate the adhesive shear stresses of ice. The results show that the adhesive force of ice decreases under the excitation of ultrasonic vibration. When the excited frequency is 79 kHz, the adhesive torsional shear stress is 0.014 MPa, which is only 7% of the one with no ultrasonic vibration.
- 24 February 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (5) , 2357
Open AccessEffect of Ultrasonic Vibration on the Surface Adhesive Characteristic of Iced Aluminum Alloy Plate
Icings on moving machinery, such as wind turbines and aircraft wings, degrade their performance and safety. Ultrasonic vibration is considered one of the deicing methods. In this research, simulations and experiments are carried out to explore the effect of ultrasonic vibration on the adhesive characteristic of ice on aluminum alloy plates. Harmonic response analyses are conducted to analyze the changing and distributions of shear stresses at the adhesive interface under different frequencies and sizes of PZT patches. The results show that there is optimum side length and thickness of the PZT patch, as the size of the iced aluminum alloy plate is constant. In these conditions, the shear stresses at the adhesive interface are high. Then, experiments on adhesive torque of ice are carried out to calculate the adhesive shear stresses of ice. The results show that the adhesive force of ice decreases under the excitation of ultrasonic vibration. When the excited frequency is 79 kHz, the adhesive torsional shear stress is 0.014 MPa, which is only 7% of the one with no ultrasonic vibration.
- Open Access
Simulation and Experimental Study on the Ultrasonic Micro-Vibration De-Icing Method for Wind Turbine Blades
In cold and humid regions, ice accretion sometimes develops on the blades of wind turbines. Blade icing reduces the power generation of the wind turbine and affects the safe operation of the wind farm. For this paper, ultrasonic micro-vibration was researched as an effective de-icing method to remove ice from the wind turbine blade surface and improve the efficiency of wind turbine power generation. A blade segment with NACA0018 airfoil and the hollow structure at the leading edge was designed. The modal analysis of the blade was simulated by ANSYS, and the de-icing vibration mode was selected. Based on the simulation results, the blade segment sample with PZT patches was machined, and its natural frequencies were measured with an impedance analyzer. A return-flow icing wind tunnel system, and a device used to measure the adhesive strength of ice covering the airfoil blade, were designed and manufactured. The experiments on the adhesive strength of the ice were carried out under the excitation of the ultrasonic vibration. The experimental results show that the adhesive strength of the ice, which was generated under the dynamic flow field condition, was lower than the ice generated by water under the static flow field condition. Under the excitation of the ultrasonic vibration, the adhesive strength of the ice decreased. When the excitation frequency was 21.228 kHz, the adhesive strength was the lowest, which was 0.084 MPa. These research findings lay the theoretical and experimental foundations for researching in-depth the application of the ultrasonic de-icing technology to wind turbines.
Open AccessSimulation and Experimental Study on the Ultrasonic Micro-Vibration De-Icing Method for Wind Turbine Blades
In cold and humid regions, ice accretion sometimes develops on the blades of wind turbines. Blade icing reduces the power generation of the wind turbine and affects the safe operation of the wind farm. For this paper, ultrasonic micro-vibration was researched as an effective de-icing method to remove ice from the wind turbine blade surface and improve the efficiency of wind turbine power generation. A blade segment with NACA0018 airfoil and the hollow structure at the leading edge was designed. The modal analysis of the blade was simulated by ANSYS, and the de-icing vibration mode was selected. Based on the simulation results, the blade segment sample with PZT patches was machined, and its natural frequencies were measured with an impedance analyzer. A return-flow icing wind tunnel system, and a device used to measure the adhesive strength of ice covering the airfoil blade, were designed and manufactured. The experiments on the adhesive strength of the ice were carried out under the excitation of the ultrasonic vibration. The experimental results show that the adhesive strength of the ice, which was generated under the dynamic flow field condition, was lower than the ice generated by water under the static flow field condition. Under the excitation of the ultrasonic vibration, the adhesive strength of the ice decreased. When the excitation frequency was 21.228 kHz, the adhesive strength was the lowest, which was 0.084 MPa. These research findings lay the theoretical and experimental foundations for researching in-depth the application of the ultrasonic de-icing technology to wind turbines.