Uma Sankar Behera
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Uma Sankar Behera has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Hun-Soo Byun
Department of Chemical and Biomolecular Engineering, Chonnam National University, Yeosu, South Korea
7 shared publications Hun-Soo Byun
5 shared publications- Jitendra Shital Sangwai
Indian Institute of Technology Madras
4 shared publications Divya Baskaran
Department of Chemical and Biomolecular Engineering
3 shared publicationsJitendra S. Sangwai
3 shared publications- Sourav Poddar
Department of Chemical Engineering, Haldia Institute of Technology, Haldia, West Bengal-721657, India
3 shared publications
Latest Publications
- Open Access
- 6 February 2026
- Published by Elsevier in Journal of CO2 Utilization
- Vol. 105
Phase behavior of binary mixtures of CO2 with methyl, ethyl, and butyl (Phenylacetates) at elevated pressures
- 6 February 2026
- Published by Elsevier in Journal of CO2 Utilization
- Vol. 105
Open AccessPhase behavior of binary mixtures of CO2 with methyl, ethyl, and butyl (Phenylacetates) at elevated pressures
- 7 January 2026
- Published by Taylor & Francis
- p. 297-327
Redox-Responsive Drug Delivery for Small Interfering RNA (siRNA) Delivery
The therapeutic potential of small interfering RNA (siRNA) has gained significant attention due to its ability to silence specific genes, offering a promising approach to treating a wide range of diseases, including cancer, genetic disorders, and viral infections. However, the successful delivery of siRNA is hindered by its instability, rapid degradation, and challenges in crossing biological membranes. Redox-responsive drug delivery systems provide innovative solutions by leveraging intracellular redox gradients, particularly the high glutathione levels in the cytoplasm, to achieve controlled and targeted siRNA release. This chapter explores the design, development, and application of redox-responsive systems for siRNA delivery. Key topics include using disulfide bonds and other redox-sensitive linkers to enhance siRNA stability during systemic circulation and ensure its release in reductive environments. Advances in nanocarriers, such as liposomes, dendrimers, and polymeric nanoparticles, are discussed, highlighting their role in improving siRNA bioavailability and cellular uptake. The chapter also reviews preclinical and clinical progress in using redox-responsive systems for siRNA therapy, along with challenges and strategies for addressing off-target effects and large-scale production. By providing a comprehensive overview, this chapter aims to contribute to the development of efficient and safe siRNA-based therapeutics.
- 7 January 2026
- Published by Taylor & Francis
- p. 297-327
Redox-Responsive Drug Delivery for Small Interfering RNA (siRNA) Delivery
The therapeutic potential of small interfering RNA (siRNA) has gained significant attention due to its ability to silence specific genes, offering a promising approach to treating a wide range of diseases, including cancer, genetic disorders, and viral infections. However, the successful delivery of siRNA is hindered by its instability, rapid degradation, and challenges in crossing biological membranes. Redox-responsive drug delivery systems provide innovative solutions by leveraging intracellular redox gradients, particularly the high glutathione levels in the cytoplasm, to achieve controlled and targeted siRNA release. This chapter explores the design, development, and application of redox-responsive systems for siRNA delivery. Key topics include using disulfide bonds and other redox-sensitive linkers to enhance siRNA stability during systemic circulation and ensure its release in reductive environments. Advances in nanocarriers, such as liposomes, dendrimers, and polymeric nanoparticles, are discussed, highlighting their role in improving siRNA bioavailability and cellular uptake. The chapter also reviews preclinical and clinical progress in using redox-responsive systems for siRNA therapy, along with challenges and strategies for addressing off-target effects and large-scale production. By providing a comprehensive overview, this chapter aims to contribute to the development of efficient and safe siRNA-based therapeutics.
- Open Access
- 30 July 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (31) , 35230-35240
Solution Thermodynamics of Methyl, Ethyl, Propyl, and Butyl Lactates in High-Pressure CO2
The demand for alkyl lactates (methyl, ethyl, propyl, and butyl) has risen significantly due to their unique properties and wide industrial applications. Accurate vapor–liquid equilibrium data are vital for the design and optimization of separation techniques involving these compounds, particularly in systems using supercritical carbon dioxide (SC-CO2) as a solvent. In this study, the phase transition of binary systems of CO2 + lactate (methyl, ethyl, propyl, butyl) was investigated at various temperatures (313.2, 333.2, 353.2, 373.2, and 393.2 K) and pressures up to 18.48 MPa, using elevated-pressure phase equilibrium equipment based on the synthetic method. Notably, comprehensive isothermal phase behavior data for these binary systems across a wide mole fraction range and high-pressure conditions are scarce. The pressure–temperature plots revealed that the critical mixture boundary connects the critical points of SC-CO2 and the respective alkyl lactates. For all four systems, enhanced miscibility was observed as the lactate mole fraction increased under isothermal conditions, accompanied by a decrease in pressure. The phase transition observed aligns with Type-I, Van Konynenburg and Scott. Enhanced miscibility was observed across all systems as the mole fraction of lactate increased under isothermal conditions with a corresponding decrease in pressure. The experimental bubble point data were correlated using the Peng et al. equation of state (PR EoS) combined with van der Waals one-fluid mixing rules. The binary interaction parameters (k ij and η ij ) were optimized as follows: methyl lactate (k ij = −0.030, η ij = −0.090), ethyl lactate (k ij = 0.000, η ij = −0.085), propyl lactate (k ij = 0.035, η ij = −0.060), and butyl lactate (k ij = 0.040, η ij = −0.050). The model exhibited good agreement with experimental results, with root-mean-square deviation (RMSD) values of 3.92, 4.08, 6.46, and 6.79% for the CO2 + methyl lactate, ethyl lactate, propyl lactate, and butyl lactate systems, respectively.
- 30 July 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (31) , 35230-35240
Open AccessSolution Thermodynamics of Methyl, Ethyl, Propyl, and Butyl Lactates in High-Pressure CO2
The demand for alkyl lactates (methyl, ethyl, propyl, and butyl) has risen significantly due to their unique properties and wide industrial applications. Accurate vapor–liquid equilibrium data are vital for the design and optimization of separation techniques involving these compounds, particularly in systems using supercritical carbon dioxide (SC-CO2) as a solvent. In this study, the phase transition of binary systems of CO2 + lactate (methyl, ethyl, propyl, butyl) was investigated at various temperatures (313.2, 333.2, 353.2, 373.2, and 393.2 K) and pressures up to 18.48 MPa, using elevated-pressure phase equilibrium equipment based on the synthetic method. Notably, comprehensive isothermal phase behavior data for these binary systems across a wide mole fraction range and high-pressure conditions are scarce. The pressure–temperature plots revealed that the critical mixture boundary connects the critical points of SC-CO2 and the respective alkyl lactates. For all four systems, enhanced miscibility was observed as the lactate mole fraction increased under isothermal conditions, accompanied by a decrease in pressure. The phase transition observed aligns with Type-I, Van Konynenburg and Scott. Enhanced miscibility was observed across all systems as the mole fraction of lactate increased under isothermal conditions with a corresponding decrease in pressure. The experimental bubble point data were correlated using the Peng et al. equation of state (PR EoS) combined with van der Waals one-fluid mixing rules. The binary interaction parameters (k ij and η ij ) were optimized as follows: methyl lactate (k ij = −0.030, η ij = −0.090), ethyl lactate (k ij = 0.000, η ij = −0.085), propyl lactate (k ij = 0.035, η ij = −0.060), and butyl lactate (k ij = 0.040, η ij = −0.050). The model exhibited good agreement with experimental results, with root-mean-square deviation (RMSD) values of 3.92, 4.08, 6.46, and 6.79% for the CO2 + methyl lactate, ethyl lactate, propyl lactate, and butyl lactate systems, respectively.
- Top Cited Papers
- 31 May 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 140, 627-652
A comprehensive review of fossil-based hydrogen production: Technological integrations, environmental sustainability, and economic viability
- 31 May 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 140, 627-652
Top Cited PapersA comprehensive review of fossil-based hydrogen production: Technological integrations, environmental sustainability, and economic viability
- 24 December 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (1) , 72-103
A Comprehensive Review on Low Salinity Water Injection for Enhanced Oil Recovery: Fundamental Insights, Laboratory and Field Studies, and Economic Aspects
- 24 December 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (1) , 72-103
A Comprehensive Review on Low Salinity Water Injection for Enhanced Oil Recovery: Fundamental Insights, Laboratory and Field Studies, and Economic Aspects
- 30 October 2024
- Published by Elsevier in Water Research
- Vol. 268 (Pt B) , 122716
Electrocoagulation treatment of wastewater collected from Haldia industrial region: Performance evaluation and comparison of process optimization
- 30 October 2024
- Published by Elsevier in Water Research
- Vol. 268 (Pt B) , 122716
Electrocoagulation treatment of wastewater collected from Haldia industrial region: Performance evaluation and comparison of process optimization
- Open Access
- 19 September 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (39) , 40941-40955
Assessment of Solubility Behavior of a Copolymer in Supercritical CO2 and Organic Solvents: Neural Network Prediction and Statistical Analysis
In the industrial sector, understanding the behavior of block copolymers in supercritical solvents is crucial. While qualitative agreement with polymer solubility curves has been evaluated using complex theoretical models in many cases, quantitative predictions remain challenging. This study aimed to create a rapid and accurate artificial neural network (ANN) model to predict the lower critical solubility and upper critical solubility space of an atypical block copolymer, poly(styrene-co-octafluoropentyl methacrylate) (PSOM), in different supercritical solvent systems over a wide range of temperatures (51.75–182.05 °C) and high pressure (3.28–200.86 MPa). The experimental data set used in this study included one copolymer, five supercritical solvents, one cosolvent, and one initiator. It consisted of seven unique copolymer–solvent combinations (252 cloud point pressures) used to predict the model quantitatively and qualitatively. To predict the PSOM–solvent interactions, the study considered two different input systems: a six-variable system, a five-variable system, and one target output. Initially, we used a three-layer feed-forward neural network to select the best learning algorithm (Levenberg–Marquardt) from 14 different algorithms, considering one sample PSOM–solvent system. Then, the network topology was optimized by varying hidden neuron numbers from 2 to 80 for all seven PSOM–solvent combination systems. The predicted cloud point pressures were in excellent agreement with the experimental cloud point pressures, confirming the model’s accuracy. It is clear from the results of a minimum mean square error (≤1.90 × 10–27) and maximum linear regression R2 (≥0.99) during training, validation, and testing of all the data sets. Further, the ANN model accuracy was tested by statistical analysis, confirming the model’s ability to accurately capture the miscibility regions of polymers, enabling efficient processing of various polymer materials. This data-driven approach facilitates the prediction of coexistence curves for other polymers and complex macromolecular systems.
- 19 September 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (39) , 40941-40955
Open AccessAssessment of Solubility Behavior of a Copolymer in Supercritical CO2 and Organic Solvents: Neural Network Prediction and Statistical Analysis
In the industrial sector, understanding the behavior of block copolymers in supercritical solvents is crucial. While qualitative agreement with polymer solubility curves has been evaluated using complex theoretical models in many cases, quantitative predictions remain challenging. This study aimed to create a rapid and accurate artificial neural network (ANN) model to predict the lower critical solubility and upper critical solubility space of an atypical block copolymer, poly(styrene-co-octafluoropentyl methacrylate) (PSOM), in different supercritical solvent systems over a wide range of temperatures (51.75–182.05 °C) and high pressure (3.28–200.86 MPa). The experimental data set used in this study included one copolymer, five supercritical solvents, one cosolvent, and one initiator. It consisted of seven unique copolymer–solvent combinations (252 cloud point pressures) used to predict the model quantitatively and qualitatively. To predict the PSOM–solvent interactions, the study considered two different input systems: a six-variable system, a five-variable system, and one target output. Initially, we used a three-layer feed-forward neural network to select the best learning algorithm (Levenberg–Marquardt) from 14 different algorithms, considering one sample PSOM–solvent system. Then, the network topology was optimized by varying hidden neuron numbers from 2 to 80 for all seven PSOM–solvent combination systems. The predicted cloud point pressures were in excellent agreement with the experimental cloud point pressures, confirming the model’s accuracy. It is clear from the results of a minimum mean square error (≤1.90 × 10–27) and maximum linear regression R2 (≥0.99) during training, validation, and testing of all the data sets. Further, the ANN model accuracy was tested by statistical analysis, confirming the model’s ability to accurately capture the miscibility regions of polymers, enabling efficient processing of various polymer materials. This data-driven approach facilitates the prediction of coexistence curves for other polymers and complex macromolecular systems.
- Top Cited Papers
- 10 September 2024
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 207
A comprehensive review on the recent advances in applications of nanofluids for effective utilization of renewable energy
- 10 September 2024
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 207
Top Cited PapersA comprehensive review on the recent advances in applications of nanofluids for effective utilization of renewable energy
- 16 July 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (15) , 13760-13795
Comprehensive Review on the Role of Nanoparticles and Nanofluids in Chemical Enhanced Oil Recovery: Interfacial Phenomenon, Compatibility, Scalability, and Economic Viability
- 16 July 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (15) , 13760-13795
Comprehensive Review on the Role of Nanoparticles and Nanofluids in Chemical Enhanced Oil Recovery: Interfacial Phenomenon, Compatibility, Scalability, and Economic Viability