Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Rashid Ahmed Khan has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Novel High-Voltage Gain Step-Up DC–DC Converter with Maximum Power Point Tracker for Solar Photovoltaic Systems

    by Rashid Ahmed Khan, Hwa-Dong Liu, Chang-Hua Lin, Shiue-Der Lu, Shih-Jen Yang, Adil Sarwar

    In order to generate electricity from solar PV modules, this study proposed a novel high-voltage gain step-up (HVGSU) DC–DC converter for solar photovoltaic system operation with a maximum power point (MPP) tracker. The PV array can supply power to the load via a DC–DC converter, increasing the output voltage. Due to the stochastic nature of solar energy, PV arrays must use the MPPT control approach to function at the MPP. This study suggests a novel HVGSU converter that uses the primary boost conversion cell and combines switched capacitors and voltage multiplier cells. The proposed topology is upgradeable for high-voltage gain step-up and can be incorporated as well. A clamp circuit reuses the energy that leaks out so that the switch voltage stress and power loss are kept to a minimum. One thing that makes it stand out is that the voltage stress on the diodes and switch stays low and constant even as the duty cycle changes. Additionally, the inductor greatly reduces the diodes’ reverse recovery losses. There is a lot of information about steady-state analyses, operation principles, and design guidelines. A prototype circuit is built to test the maximum power point tracking operation with voltage conversion from 20–40 V to 380 V at 150 W. The results of the experiments support the theoretical analysis and claimed benefits. The proposed converter has the ability to track the maximum power point and a high conversion efficiency over a wide range of power. A weighted efficiency of 90–96% is shown by the prototype.


  • Open Access

    Reptile Search Algorithm (RSA)-Based Selective Harmonic Elimination Technique in Packed E-Cell (PEC-9) Inverter

    by Rashid Ahmed Khan, Bushra Sabir, Adil Sarwar, Hwa-Dong Liu, Chang-Hua Lin

    The multilevel inverters (MLIs) are capable of handling large quantities of power and generating high-quality output voltages. Consequently, the size of the filters is reduced, and the circuitry is simplified. As a result, they have a diverse range of uses in the industrial sector, especially in smart grids. The input voltage boosting feature is required to utilize the MLI with renewable energy. In addition, a large number of components are required to attain higher output voltage levels, which increases the cost of the circuit and weight. A variety of MLI topologies have been identified to reduce losses, device quantity, and device ratings. The selective harmonic elimination (SHE) approaches reduce distinct lower order harmonics by computing the ideal switching angles. This research presents a nine–level Packed E–Cell (PEC–9) inverter that uses selective harmonic elimination to eliminate total harmonic distortion. In order to calculate the best switching angle, the reptile search algorithm (RSA) is implemented in this paper, a nature–inspired metaheuristic algorithm inspired by the hunting behavior of the crocodile. The hunting behavior of crocodiles is implemented in two main steps: the first is encircling, which is accomplished by belly walking or high walking, and the second is hunting, which is accomplished by hunting cooperation or hunting coordination. In this technique, nonlinear transcendental equations have been solved. The simulation was run in the MATLAB R2021b software environment. The simulation results suggest that the RSA outperforms the other metaheuristic algorithms. Furthermore, the simulation result was validated on a hardware setup using DSP–TMS320F28379D in the laboratory.


  • Open Access

    Archimedes Optimization Algorithm Based Selective Harmonic Elimination in a Cascaded H-Bridge Multilevel Inverter

    by Rashid Ahmed Khan, Shoeb Azam Farooqui, Mohammad Irfan Sarwar, Seerin Ahmad, Mohd Tariq, Adil Sarwar, Mohammad Zaid, Shafiq Ahmad, Adamali Shah Noor Mohamed

    This paper presents the Archimedes optimization algorithm to eliminate selective harmonics in a cascaded H-bridge (CHB) multilevel inverter (MLI). The foremost objective of the selective harmonic elimination (SHE) is to eliminate lower order harmonics by finding the optimal switching angle combination which minimizes the objective function containing Total Harmonic Distortion (THD) and other specific harmonic terms. Consequently, the THD is also reduced. In this study, a recently proposed metaheuristic technique named the Archimedes optimization algorithm (AOA) is used to determine the optimal angles corresponding to the 5, 7 and 9 level CHB-MLI. AOA involves equations related to a physical law, the Archimedes Principle. It is based on the idea of a buoyant force acting upward on a body or object that is partially or completely submerged in a fluid, and the upward force is related to the weight of the fluid displaced. This optimization technique has been implemented on CHB-MLI to generate various level outputs, simulated on MATLAB™ R2021a version environment software. The simulation results reveal that AOA is a high-performance optimization technique in terms of convergence speed and exploitation-exploration balance and is well-suited to the solution of the SHE problem. Furthermore, the laboratory validated the simulation result on a hardware setup using DSP-TMS320F28379D.


  • Open Access

    Crystal Structure Algorithm (CryStAl) Based Selective Harmonic Elimination Modulation in a Cascaded H-Bridge Multilevel Inverter

    by Shoeb Azam Farooqui, Mohammad Munawar Shees, Mohammed F. Alsharekh, Saleh Alyahya, Rashid Ahmed Khan, Adil Sarwar, Muhammad Islam, Sheroz Khan

    This paper introduces an effective Selective Harmonic Elimination (SHE) modulation technique in a five, seven, and nine-level cascaded H-bridge (CHB) multilevel inverter (MLI). Minimization of the harmonics and device counts is the basis for the ongoing research in the area of MLI. Reduced harmonics and hence the lower Total Harmonic Distortion (THD), improve the output power quality. SHE is a low-frequency modulation scheme to achieve this goal. SHE techniques are used to eliminate the distinct lower-order harmonics by determining the optimum switching angles. These angles are evaluated by solving the non-linear transcendental equations using any optimization technique. For this purpose, the Crystal Structure Algorithm (CryStAl) has been used in this paper. It is a metaheuristic, nature-inspired, and highly efficient optimization technique. CryStAl is a simple and parameter-free algorithm that doesn’t require the determination of any internal parameter during the optimization process. It is based on the concept of crystal structure formation by joining the basis and lattice point. This natural occurrence can be realized in crystalline minerals in their symmetrically organized components: ions, atoms, and molecules. The concept has been utilized to solve non-linear transcendental equations. SIMULINK/MATLAB environment has been used for the simulation. The simulation result shows that the crystal structure algorithm is very effective and excels the other metaheuristic algorithm. Hardware results validate the performance.


  • Cuckoo Search Algorithm and Artificial Neural Network-based MPPT: A Comparative Analysis

    by Shoeb Azam Farooqui, Rashid Ahmed Khan, Noorul Islam, Naeem Ahmed

    Solar PV system has exponentially gained its popularity and applications in residential, industrial, battery charging, and solar-powered vehicles. Because of its certain shortcomings such as low conversion efficiency, non-linear characteristic, high cost of installation, and dependability on environmental conditions that is ambient temperature and solar radiation, it drew the researcher’s attention to overcome these limitations. Numerous MPPT (maximum power point tracking) algorithms have been presented in this regard in order to capture the maximum power from a solar PV module. Among these MPPT techniques, only a few can effectively work under varying atmospheric conditions. In this article, artificial neural network-based MPPT is presented and cuckoo search algorithm-based MPPT has been used and their comparative analysis has been done. The simulation is performed and the outcome is then validated using MATLAB/Simulink.


  • Dust Deposition on PV Module and Its Characteristics

    by Rashid Ahmed Khan, Shoeb Azam Farooqui, Mudassir Hasan Khan, Mohammad Sarfraz, Mohammad Luqman, Mohd. Farhan Khan


  • Symmetrical and Asymmetrical Multilevel Inverter Topologies With Reduced Device Count: A Review

    by Noorul Islam, Khan Mohammad, Rashid Ahmed Khan, Zeeshan Sarwer, Adil Sarwar

    Multilevel inverters (MLIs) are extremely influential in renewable energy systems, are used to convert DC power into AC. MLIs are more beneficial in comparison to the two-level conventional inverter in terms of lower total harmonic distortion (THD), lesser electromagnetic interference (EMI), increases the capability of fault tolerance, and are more efficient. The major aspect of this review article is to analyze the recent (MLI) topologies into two categories which are symmetric and asymmetric configuration which contains the reduced number of switches $(\mathrm{N}_{\mathrm{S}\mathrm{W}})$. currently, Researchers have an eye on the using reduced number of components in MLI topologies for lesser voltage stress and high efficiency. Performance parameters such as total standing voltage (TSV), THD, and modulation techniques are briefly discussed in this article. furthermore, the general comparison of these topologies is depicted in tabular & graphical representation based on the required number of switches, number of the gate drivers $(\mathrm{N}_{\mathrm{G}\mathrm{D}})$, Number of dc voltage sources $(\mathrm{N}_{\mathrm{D}\mathrm{C}})$, THD, and the number of level $(\mathrm{N}_{\mathrm{L}})$ that are obtained through the multilevel inverter topologies.