Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mateusz Zakrzewski has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Study on the rheological properties of biodiesel in the form of goose fat methyl ester

    by Mateusz Zakrzewski, Marek Wozniak, Tomasz Bartosik, Krzysztof Siczek, Ireneusz Pielecha, Daria Dendek, Adam Rylski, Filip Szwajca, Sławomir Kadlubowski, Tomasz Maniecki


  • Open Access

    The Influence of Basicity/Acidity of Lanthanum Systems on the Activity and Selectivity of the Transesterification Process

    by Daria Dendek, Mateusz Zakrzewski, Radosław Ciesielski, Adam Kedziora, Waldemar Maniukiewicz, Małgorzata Szynkowska-Jóźwik, Tomasz Maniecki

    The impact of heterogeneous catalytic systems, which are based on rare earth metals, on the properties of biodiesel produced via the transesterification process in a stationary reactor (autoclave) was thoroughly investigated. The physicochemical attributes, including the specific surface area, were analyzed employing the Brunauer–Emmett–Teller (BET) method. The basicity and acidity levels of the catalytic systems were evaluated through temperature-programmed desorption of ammonia and carbon dioxide (TPD-NH3, TPD-CO2), respectively. Furthermore, High-Performance Liquid Chromatography (HPLC) analysis facilitated the assessment of triglyceride conversion and the determination of methyl ester (FAME) selectivity within these processes. Our findings indicate that catalytic systems augmented with lanthanum showcased superior performance. A significant correlation was discerned between the conversion and selectivity to methyl esters and both the specific surface area and the acidity and basicity properties of the catalytic systems under study. These results underscore the crucial role that the physicochemical characteristics of catalytic systems play in optimizing the transesterification process, thereby enhancing the quality of the produced biodiesel. This study contributes valuable insights into the development of more efficient and effective biodiesel production methodologies, highlighting the potential of rare earth metal-based catalysts in renewable energy technologies.


  • Open Access

    Influence of Lanthanum Precursor on the Activity of Nickel Catalysts in the Mixed-Methane Reforming Process

    by Mateusz Zakrzewski, Oleksandr Shtyka, Jacek Rogowski, Radoslaw Ciesielski, Adam Kedziora, Tomasz Maniecki

    This work investigated the influence of the catalytic support precursor on the activity of nickel catalysts 20%Ni/5%La2O3–95%Al2O3 in the mixed methane reforming process. The activity tests were carried out at a temperature of 750 °C. The research showed that the catalyst prepared from the precursor containing chloride exhibited very low conversions of methane and carbon dioxide. The poisoned catalyst system before and after the calcination process was subjected to Temperature Programmed Surface Reaction tests to determine whether the thermal treatment causes a decrease in the amount of chlorine in the system. To determine the decomposition temperature of the LaCl3 precursor and the nickel chloride NiCl2 compound, the samples were analyzed by Thermogravimetry. Finally, the catalytic samples were tested by Time-of-Flight Secondary Ion Mass Spectrometry analysis to confirm the presence of nickel–chlorine bonds on the surface of the catalytic system.


  • Open Access

    The Research on Characteristics of CI Engine Supplied with Biodiesels from Brown and Yellow Grease

    by Radosław Ciesielski, Mateusz Zakrzewski, Oleksandr Shtyka, Tomasz Maniecki, Adam Rylski, Marek Wozniak, Przemyslaw Kubiak, Krzysztof Siczek

    The effect of three kinds of fuels used to supply a diesel engine on its characteristics, fuel consumption, and emissions was studied. The fuels comprised pure diesel, a blend of diesel with 6% of methyl ester of yellow grease in the form of rapeseed oil, and a blend of diesel with methyl ester of brown grease in the form of goose fat. The chromatographic analysis was conducted for these fuels, and the results are presented. Two tests, comprising measurement of fuel consumption and engine emissions, were conducted on a vehicle with a diesel engine operating under zero load and under full load. The engine’s characteristics, including both power and torque versus speed, were determined under full engine load. The results of these tests are presented in this paper. The results indicated that the use of different methyl ester-based biodiesel blends with the same content of diesel to supply the diesel engine resulted in different fuel consumption and emissions of the engine not only in comparison to the supply of pure diesel but between biodiesels analyzed.

  • Open Access

    Effect of Ruthenium and Cerium Oxide (IV) Promotors on the Removal of Carbon Deposit Formed during the Mixed Methane Reforming Process

    by Mateusz Zakrzewski, Oleksandr Shtyka, Radoslaw Ciesielski, Adam Kedziora, Waldemar Maniukiewicz, Natalia Arcab, Tomasz Maniecki

    This work investigates the effect of the addition of Ru and CeO2 on the process of gasification of carbon deposits formed on the surface of a nickel catalyst during the mixed methane reforming process. Activity studies of the mixed methane reforming process were carried out on (Ru)-Ni/CeO2-Al2O3 catalysts at the temperature of 650–750 °C. The ruthenium-promoted catalyst exhibited the highest activity. Carbonized post-reaction catalyst samples were tested with the TOC technique to investigate the carbonization state of the samples. The bimetallic catalyst had the lowest amount of carbon deposit (1.5%) after reaction at 750 °C. The reactivity of the carbon species was assessed in mixtures of oxygen, hydrogen, carbon dioxide, and water. Regardless of the gasifying agent used, the carbon deposit was removed from the surface of the catalytic system. The overall mechanism of mixed methane reforming over Ru and CeO2 was shown.