OKObeen Kwon

Obeen Kwon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Obeen Kwon has a total of 101 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Understanding the Durability of Amorphous Iridium Oxide Catalyst in Proton Exchange Membrane Water Electrolyzers

    by Obeen Kwon, Hung-Ming Joseph Chang, Juhyun Oh, Lahiru Pasikku Hannadige, Bora Kalkan, Carol Korzeniewski, Michael J. Zachman, A. Jeremy Kropf, Deborah J. Myers, Iryna Zenyuk

    Amorphous iridium oxide (A-IrOx) is a promising anode catalyst for proton exchange membrane water electrolyzers (PEMWEs) due to its superior beginning-of-life (BOL) catalytic activity for oxygen evolution reaction (OER)1-3. Nonetheless, its limited long-term durability compared to crystalline iridium oxide (C-IrO2) remains a critical barrier to address4. In this work, we investigate the degradation mechanisms of A-IrOx using membrane electrode assembly (MEA) by correlating electrochemical performance with structural evolution under harsh OER conditions via an accelerated stress test (AST) in PEMWEs.

  • Development of PGM-Free Anodes for Proton Exchange Membrane (PEM) Water Electrolyzers through Ionomer Engineering

    by Vivek Shastry Devalla, Obeen Kwon, Patrick Yang, Bilal Iskandarani, Iryna Zenyuk

    Proton exchange membrane water electrolyzers (PEMWEs) are increasingly recognized as a key technology for large-scale green hydrogen production due to their capability to operate at high differential pressures, their compact stack design, and their ability to sustain higher current densities. Despite these advantages, widespread adoption remains limited primarily by high system costs, particularly those associated with iridium used in the anode for the oxygen evolution reaction (OER) [1,2]. The scarcity and high cost of iridium have driven extensive research aimed at reducing iridium loading and exploring nonprecious alternatives. Nevertheless, the use of PGM-free anode catalysts in the highly acidic, oxidative environments of PEMWEs presents significant scientific and engineering challenges.

  • From activity to durability: Structural evolution of amorphous and crystalline iridium oxides in PEM water electrolyzers

    by Obeen Kwon, Juhyun Oh, Lahiru Pasikku Hannadige, Patrick Yang, Gabriel C. da Silva, Yu Morimoto, Serhiy Cherevko, Carol Korzeniewski, Michael J. Zachman, Iryna V. Zenyuk


  • Predictors of Membrane Electrode Assembly Activity for Iridium Oxide Catalysts in Proton Exchange Membrane Water Electrolysis

    by Cliffton Ray Wang, Obeen Kwon, Joni Spencer, Kayley Paul, Camille Roiron, Giovanni Ferro, Jonathan Braaten, Shirin Mehrazi, Alessio Cosenza, Yu Morimoto, et al.

    A primary barrier to the widespread deployment of proton exchange membrane water electrolyzers (PEMWEs) is the high usage of iridium for the oxygen evolution reaction (OER) catalyst. Reducing iridium loadings from current values of 1–3 mgIr·cm−2 to ≤0.10 mgIr·cm−2 is critical, and achieving this target requires substantial improvements in catalyst activity and durability. Despite ongoing progress, optimization remains constrained by a limited fundamental understanding of how specific catalyst properties influence performance in membrane electrode assembly (MEA) environments. Studies of catalyst activity have largely relied on purely empirical approaches, leaving foundational knowledge for rational catalyst design—such as understanding how crystallinity and oxidation state impact performance—not well established. This work bridges this gap in knowledge by systematically correlating structural and chemical properties of six commercial IrOx catalysts with their electrochemical performance in MEAs. Each catalyst was characterized for BET surface area, chemical composition, and local electronic configuration prior to incorporation into MEAs for testing. Among the nine descriptors examined, conventional screening metrics were weak predictors of OER activity: BET surface area was essentially non-predictive (R2 = 0.02), and RDE activity did not translate strongly to MEA activity (R2 = 0.53) In contrast, composition- and coordination-based descriptors showed the strongest correlations, with bulk oxygen content and the μ1/μ2 and Ir3+/Ir4+ ratios exhibiting near-perfect correlations with MEA activity (R2 ≈ 0.98). Density functional theory calculations reveal the molecular origins of these correlations by identifying μ1 oxygen as the most electrophilic species and thus the most probable active center for the OER, while linking μ1-rich surfaces to Ir3+-rich environments. Overall, this integrated experimental–theoretical approach establishes robust descriptors for IrOx performance and lays the groundwork for the design of next-generation PEMWE catalysts.


  • Structure of iridium oxide catalysts dictates performance differences for proton exchange membrane water electrolyzers

    by Obeen Kwon, Masao Suzuki Shibata, Rebecca Hamlyn, Juhyun Oh, Jack T. Lang, Cliffton Ray Wang, Shannon W. Boettcher, Carol Korzeniewski, Ethan J. Crumlin, Michael J. Zachman, et al.

    A systematic catalyst loading study reveals the higher catalytic activity of amorphous iridium oxide arises from bulk participation via suggested electrochemical descriptors, while identifying loading-independent intrinsic electrochemical properties.


  • Open Access

    Foundation Models for Zero-Shot Segmentation of Scientific Images without AI-Ready Data

    by Shubhabrata Mukherjee, Jack Lang, Obeen Kwon, Iryna Zenyuk, Valerie Brogden, Adam Weber, Daniela Ushizima


  • Pathways to Low-Iridium Loading in Proton Exchange Membrane Water Electrolyzer Anodes: From Catalyst Design to Catalyst Layer Integration

    by Chanho Pak, Song Gyun Kim, Ho Seong Yang, Yong Won Kim, Jack Todd Lang, Hung-Ming Joseph Chang, Obeen Kwon, Iryna V. Zenyuk

    Proton exchange membrane water electrolyzers (PEMWEs) are a promising technology for large-scale green hydrogen production; however, the high cost and scarcity of iridium (Ir) remain major obstacles to commercialization. Reducing Ir loading while maintaining catalytic activity and durability is therefore essential to achieving cost-effective hydrogen production. Among various strategies, the development of supported oxygen evolution reaction catalysts has emerged as a particularly effective approach. By anchoring Ir nanostructures onto acid-stable, high-surface-area metal oxide supports, such as TiO2, SnO2, and Ta2O5, researchers have demonstrated enhanced catalyst utilization, improved stability, and significantly reduced precious metal content. These supports not only disperse active sites more effectively but also promote strong metal−support interactions, enabling robust performance under harsh PEMWE operating conditions. This perspective highlights recent advances in structure engineering, oxidation state modulation, and support material design that collectively enable the fabrication of low-Ir anodes with high efficiency. This work further focuses on the integration of these supported catalysts into membrane electrode assemblies (MEAs) and proposes future research directions aimed at achieving the Ir loading target (0.125 mgIr cm−2) suggested by the U.S. Department of Energy. Together, these innovations offer a path forward toward scalable and economically viable PEMWE systems for a sustainable hydrogen economy.


  • (Invited) Quantifying Electrochemical Descriptors to Reveal Structural Differences of Amorphous and Crystalline Iridium Oxide Catalysts for Proton Exchange Membrane Water Electrolyzer

    by Iryna Zenyuk, Obeen Kwon, Masao Suzuki Shibata, Rebecca Hamlyn, Juhyun Oh, Jack Todd Lang, Cliffton Wang, Carol Korzeniewski, Ethan J. Crumlin, Michael J. Zachman, et al.

    To meet cost targets for GW-scale deployment of proton exchange membrane water electrolyzers (PEMWEs), iridium (Ir) loading needs to be reduced by about factor of ten to below 0.1 mg/cm2. However, catalyst layer integrity for low IrOx catalyst loadings can suffer from poor in-plane electric conductivity and overall poor particle-to-particle connectivity. To study low catalyst loadings a rigorous methodology is needed, where catalyst layer inhomogeneities can be identified before extensive activity and durability studies. Here, we present a framework for testing low loading IrOx catalysts within membrane electrode assembly (MEA), where loading study was conducted using two Ishifuku catalysts having different structures: amorphous and crystalline. By varying catalyst loading, electrochemical descriptors were obtained such as mass specific activity, exchange current density, specific surface charge and others. The change in voltage in kinetic region between various catalyst loadings corresponded to Tafel slope, indicating that the catalyst surface area reduction was the major reason for the activity loss at lower loadings. In-plane electric conductivity losses were minimum (Figure 1. Intrinsic activity of amorphous IrOx and crystalline IrO2 through catalyst loading study on MEAs. (a) BETsurface area as a function of anode loading, slope indicates the specific surface area. b, j 0,s acquisition normalized by BET surface area through linear correlation with varying anode loading. c, Intrinsic current densities at various anode loading normalized by BET area from HFR-free polarization curves. Figure 1

  • Understanding Structure Differences of Iridium Oxides Depends on Loading in Proton Exchange Membrane Electrolyzers

    by Obeen Kwon, Florian Chabot, Carol Korzeniewski, Shannon Boettcher, Yu Morimoto, Iryna Zenyuk

    Proton exchange membrane water electrolyzers (PEMWEs) have drawn attention among various hydrogen production technologies due to their zero-emission, high conversion efficiency, high hydrogen purity (>99.99%), and quick response under dynamic operation.1,2 With these auspicious characteristics in PEMWEs, they are believed to produce 40 % of green hydrogen by 2050 among all electrolyzer technologies. Nonetheless, many bottlenecks within PEMWEs still hinder their broader commercialization. Iridium oxide is the most widely used oxygen evolution reaction (OER) electrocatalyst at the anode. Moreover, this catalyst occupies the biggest portion (26–47%) of the overall cost of PEMWE systems, mostly due to the scarcity of iridium.3 Commercial iridium oxide catalysts are generally two types depending on the material structure: amorphous IrOx and crystalline IrO2. The trade-off relationship exists in catalytic activity vs. stability between amorphous and crystalline IrOx catalysts.4–6 To overcome these problems, fundamental studies of iridium oxide need to be conducted to reduce catalyst loading while maintaining high performance. Herein, we report the new iridium oxide catalysts (amorphous IrOx, crystalline IrO2, Ishifuku Metal) for the first time. These new iridium oxide catalysts are physically and electrochemically characterized. To be specific, we confirm the distinct characteristics of each catalyst using scanning electron microscopy (SEM), focused ion beam SEM (FIB-SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) analysis with nitrogen adsorption isotherm, Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). As a result, the crystalline IrO2 has a unique morphology with grown needles onto catalyst particles thereby the BET specific surface area of crystalline IrO2 (~110 m2 g-1) is over two times higher than amorphous IrOx (~50 m2 g-1). Electrochemical performance is evaluated for varied catalyst loadings of membrane electrode assembly (MEA). The catalyst loadings (0.10, 0.26, 0.35, and 0.85 mgIrOx cm-2) for both anode catalysts were prepared. The CV results of amorphous IrOx exhibit unique redox peaks under specific voltage (~0.8 and ~1.2 V vs. RHE), which indicates the transition of oxidation state. These peaks develop with CV cycling and become fully developed after 100 cycles, indicating that the surface of the catalyst takes some time to activate. On the other hand, crystalline IrO2 shows no specific redox peaks but rather has a double-layer capacitance under lower voltage ( vs. RHE). Figure 1 shows 1.92 V (amorphous) and 1.94 V (crystalline) at 5 A cm-2 for 0.85 mg cm-2 loading, respectively. Both catalysts showed relatively low Tafel slopes of 43.8 mV dec-1 (amorphous IrOx) and 53.7 mV dec-1 (crystalline IrO2). This presentation will correlate the electrochemical performance described here to the structural properties of these two types of IrOx catalysts. Figure 1. Polarization curve for prepared iridium oxide catalysts (amorphous IrOx and crystalline IrO2). Both cells have anode loadings of 0.85 mg cm-2, cell temperature at 60 °C, 10 sccm for H2O flow rate at the anode, and dry for the cathode. References [1] C. Wang, K. Lee, C. P. Liu, D. Kulkarni, P. Atanassov, X. Peng, and I. V. Zenyuk, Int. Mater. Rev., (2024), 69, 3–18. [2] K. Zhang, X. Liang, L. Wang, K. Sun, Y. Wang, Z. Xie, Q. Wu, X. Bai, M. S. Hamdy, H. Chen, and X. Zou, Nano Research Energy, (2022), 1, 9120032. [3]A. Mayyas, M. Ruth, B. Pivovar, G. Bender, and K. Wipke, Manufacturing cost analysis for proton exchange membrane water electrolyzers, National Renewable Energy Lab.(NREL), Golden, CO (United States), (2019) [4]J. Xu, H. Jin, T. Lu, J. Li, Y. Liu, K. Davey, Y. Zheng, and S.-Z. Qiao, Sci. Adv., (2023), 9, eadh1718. [5] V. Pfeifer, T. E. Jones, J. J. V. Vélez, R. Arrigo, S. Piccinin, M. Hävecker, A. K.-Gericke, and Ro. Schlögl, Chem. Sci., (2016), 3, 2143–2149. [6] M. Mallinovic, P. Paciok, E. S. Koh, M. Geuß, J. Choi, P. Pfeifer, J. P. Hofmann, D. Göhl, M. Heggen, S. Cherevko, M. Lendendecker, Adv. Energy Mater. (2023), 13, 2301450. Figure 1