Ismael Lengua Lengua
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ismael Lengua Lengua has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Guillermo Peris-Fajarnés
Universitat Politècnica de València
3 shared publications - María Moncho Santonja
Universitat Politècnica de València
3 shared publications - Eva María Burguera Sierra
Centro de Investigación de Tecnologías Gráficas, Universitat Politècnica de València
2 shared publications - Ignacio Tortajada
Centro de Investigación de Tecnologías Gráficas, Universitat Politècnica de València
2 shared publications - Isabel Seguí Verdú
Department Graphical Engineering, Universitat Politècnica de Valencia, 46022 Valencia, Spain
2 shared publications Aaron Degroote
Centro de investigación en tecnologías gráficas - Universitat Politècnica de València
1 shared publication
Latest Publications
- 1 June 2026
- Published by Universitat Politecnica de Valencia
- p. 46-52
Avances tecnológicos en el proceso del pulido industrial: Una revisión preliminar
El pulido industrial es una etapa clave en la producción industrial debido a las crecientes exigencias de precisión dimensional y calidad superficial. Este estudio presenta un análisis bibliométrico publicaciones indexadas en Web of Science con el objetivo de identificar las principales tendencias tecnológicas y líneas emergentes de investigación en este campo. Los datos se analizaron mediante Biblioshiny a partir de mapas temáticos y redes de coocurrencia. Los resultados evidencian una convergencia entre los procesos de pulido y la interacción humano-robot, destacando la automatización supervisada como una de las principales líneas de innovación. En los últimos años, el foco investigador se ha orientado hacia el rendimiento del proceso y la optimización de la rugosidad superficial. Asimismo, China se posiciona como el país con mayor producción científica en el área.
- 1 June 2026
- Published by Universitat Politecnica de Valencia
- p. 46-52
Avances tecnológicos en el proceso del pulido industrial: Una revisión preliminar
El pulido industrial es una etapa clave en la producción industrial debido a las crecientes exigencias de precisión dimensional y calidad superficial. Este estudio presenta un análisis bibliométrico publicaciones indexadas en Web of Science con el objetivo de identificar las principales tendencias tecnológicas y líneas emergentes de investigación en este campo. Los datos se analizaron mediante Biblioshiny a partir de mapas temáticos y redes de coocurrencia. Los resultados evidencian una convergencia entre los procesos de pulido y la interacción humano-robot, destacando la automatización supervisada como una de las principales líneas de innovación. En los últimos años, el foco investigador se ha orientado hacia el rendimiento del proceso y la optimización de la rugosidad superficial. Asimismo, China se posiciona como el país con mayor producción científica en el área.
- 1 June 2026
- Published by Universitat Politecnica de Valencia
- p. 40-45
Exploración inicial de los enfoques y desarrollos actuales del proceso de pulido industrial
En el presente trabajo se ofrece un análisis del estado actual de los sistemas de Pulido industrial, siendo el Pulido una fricción aplicada sobre una superficie a través de medios abrasivos para mejorar sus acabados y propiedades. Así mismo se han estudiado y recogido los últimos avances en los sistemas de pulido industrial, las nuevas tendencias de aplicación y desarrollo de pulidos en la industria, la interacción humano-robot en las líneas de pulido así como la incorporación de la inteligencia artificial en los procesos de pulido.
- 1 June 2026
- Published by Universitat Politecnica de Valencia
- p. 40-45
Exploración inicial de los enfoques y desarrollos actuales del proceso de pulido industrial
En el presente trabajo se ofrece un análisis del estado actual de los sistemas de Pulido industrial, siendo el Pulido una fricción aplicada sobre una superficie a través de medios abrasivos para mejorar sus acabados y propiedades. Así mismo se han estudiado y recogido los últimos avances en los sistemas de pulido industrial, las nuevas tendencias de aplicación y desarrollo de pulidos en la industria, la interacción humano-robot en las líneas de pulido así como la incorporación de la inteligencia artificial en los procesos de pulido.
- 1 June 2026
- Published by Universitat Politecnica de Valencia
- p. 454-460
Overtourism y rechazo social al turismo: Una revisión sistemática y bibliométrica de la literatura
Este estudio analiza la literatura académica sobre el overtourism y el rechazo social al turismo mediante una revisión sistemática apoyada en un análisis bibliométrico descriptivo. A partir de 542 artículos y revisiones indexados en Scopus entre 2017 y 2025, se examinan la evolución de la investigación, las principales revistas y autores, la distribución geográfica y los términos clave. Los resultados muestran una rápida consolidación del campo desde 2017, junto con una estructura fragmentada y una marcada concentración en destinos urbanos europeos. Conceptualmente, el overtourism emerge como el concepto dominante, mientras que la turismofobia presenta una presencia marginal.
- 1 June 2026
- Published by Universitat Politecnica de Valencia
- p. 454-460
Overtourism y rechazo social al turismo: Una revisión sistemática y bibliométrica de la literatura
Este estudio analiza la literatura académica sobre el overtourism y el rechazo social al turismo mediante una revisión sistemática apoyada en un análisis bibliométrico descriptivo. A partir de 542 artículos y revisiones indexados en Scopus entre 2017 y 2025, se examinan la evolución de la investigación, las principales revistas y autores, la distribución geográfica y los términos clave. Los resultados muestran una rápida consolidación del campo desde 2017, junto con una estructura fragmentada y una marcada concentración en destinos urbanos europeos. Conceptualmente, el overtourism emerge como el concepto dominante, mientras que la turismofobia presenta una presencia marginal.
- 1 March 2026
- Published by UK Zhende Publishing Limited Company in DYNA Ingenieria e Industria
- Vol. 101 (2) , 106-110
DESIGN AND COMPARISON BASED ON FINITE ELEMENT ANALYSIS OF A NON-PNEUMATIC WHEEL TO IMPROVE WHEELCHAIR COMFORT
The standard wheelchair design features two large rear wheels fixed parallel to the seat and two smaller, front swivel wheels. While functional, this configuration transmits terrain-induced vibrations directly to the user, especially through the front wheels, which have limited shock-absorption capacity. For users with neuromuscular conditions, such vibrations can trigger spastic responses, reducing comfort and overall usability. This study explores non-pneumatic tires (NPTs) as a viable alternative to traditional front wheels, focusing on structural performance and ergonomic improvements. A non-pneumatic front wheel based on cellular/lattice structures is proposed to mitigate vibrations from irregular terrain without relying on external damping systems. The goal is to increase comfort, enhance user stability, and maintain manoeuvrability. To support this goal, one of the main objectives of this work is to use finite element analysis (FEA) as an initial comparison tool among different internal NPT geometries, enabling their mechanical behaviour to be evaluated under equivalent conditions and thereby supporting the selection of the most suitable alternative for subsequent experimental validation and additive manufacturing. Three-dimensional wheel models were created in CAD and analysed through non-linear static finite element simulations, assigning thermoplastic polyurethane (TPU) to the tire–spoke assembly and polylactic acid (PLA) to the rim. The designs were compared in terms of stress distribution, axial displacements, strain levels, structural stiffness, and stiffness-to-mass efficiency, while maintaining identical boundary conditions and material settings. Design optimisation focused on variables including material thickness, spoke inclination, and spoke count, striking a balance between rigidity and flexibility. The analysed configurations combine a rigid PLA rim with a flexible TPU tire and spoke system, providing controlled deformation while preserving mechanical strength. Among the three geometries studied, the honeycomb lattice showed the most favourable stiffness-to-mass balance and was identified as the most suitable candidate for future 3D-printed prototyping and bench testing. Overall, the results support the feasibility of incorporating additively manufactured NPT front wheels into conventional wheelchairs to improve accessibility and comfort. Key Words: wheelchairs, cellular structures, 3D printing, impact absorption, finite elements,
- 1 March 2026
- Published by UK Zhende Publishing Limited Company in DYNA Ingenieria e Industria
- Vol. 101 (2) , 106-110
DESIGN AND COMPARISON BASED ON FINITE ELEMENT ANALYSIS OF A NON-PNEUMATIC WHEEL TO IMPROVE WHEELCHAIR COMFORT
The standard wheelchair design features two large rear wheels fixed parallel to the seat and two smaller, front swivel wheels. While functional, this configuration transmits terrain-induced vibrations directly to the user, especially through the front wheels, which have limited shock-absorption capacity. For users with neuromuscular conditions, such vibrations can trigger spastic responses, reducing comfort and overall usability. This study explores non-pneumatic tires (NPTs) as a viable alternative to traditional front wheels, focusing on structural performance and ergonomic improvements. A non-pneumatic front wheel based on cellular/lattice structures is proposed to mitigate vibrations from irregular terrain without relying on external damping systems. The goal is to increase comfort, enhance user stability, and maintain manoeuvrability. To support this goal, one of the main objectives of this work is to use finite element analysis (FEA) as an initial comparison tool among different internal NPT geometries, enabling their mechanical behaviour to be evaluated under equivalent conditions and thereby supporting the selection of the most suitable alternative for subsequent experimental validation and additive manufacturing. Three-dimensional wheel models were created in CAD and analysed through non-linear static finite element simulations, assigning thermoplastic polyurethane (TPU) to the tire–spoke assembly and polylactic acid (PLA) to the rim. The designs were compared in terms of stress distribution, axial displacements, strain levels, structural stiffness, and stiffness-to-mass efficiency, while maintaining identical boundary conditions and material settings. Design optimisation focused on variables including material thickness, spoke inclination, and spoke count, striking a balance between rigidity and flexibility. The analysed configurations combine a rigid PLA rim with a flexible TPU tire and spoke system, providing controlled deformation while preserving mechanical strength. Among the three geometries studied, the honeycomb lattice showed the most favourable stiffness-to-mass balance and was identified as the most suitable candidate for future 3D-printed prototyping and bench testing. Overall, the results support the feasibility of incorporating additively manufactured NPT front wheels into conventional wheelchairs to improve accessibility and comfort. Key Words: wheelchairs, cellular structures, 3D printing, impact absorption, finite elements,
- 2 April 2025
- Published by Springer Nature
- p. 819-826
Remote Sensing, Machine Learning, and Image Processing for Environmental Conservation
- 2 April 2025
- Published by Springer Nature
- p. 819-826
Remote Sensing, Machine Learning, and Image Processing for Environmental Conservation
- 1 January 2025
- Published by Ion Creanga State Pedagogical University
Integrating AutoCad and Inventor in chemical engineering education: adaptations post-DANA flood event in Valencia
The severe DANA (Depresión Aislada en Niveles Altos) that struck Valencia, Spain, caused significant disruptions in Chemical Engineering courses, particularly Technical Drawing, which relies on practical, hands-on work. This paper describes the pedagogical adaptations implemented to ensure educational continuity under these conditions. Strategies included the use of interactive tools such as Wooclap to sustain engagement, voluntary tasks to enhance flexibility, and microlearning videos addressing common AutoCAD errors. These measures maintained learning during the disruption and strengthened instructional resilience, highlighting the need for adaptive teaching models and long-term contingency planning in technical education.
- 1 January 2025
- Published by Ion Creanga State Pedagogical University
Integrating AutoCad and Inventor in chemical engineering education: adaptations post-DANA flood event in Valencia
The severe DANA (Depresión Aislada en Niveles Altos) that struck Valencia, Spain, caused significant disruptions in Chemical Engineering courses, particularly Technical Drawing, which relies on practical, hands-on work. This paper describes the pedagogical adaptations implemented to ensure educational continuity under these conditions. Strategies included the use of interactive tools such as Wooclap to sustain engagement, voluntary tasks to enhance flexibility, and microlearning videos addressing common AutoCAD errors. These measures maintained learning during the disruption and strengthened instructional resilience, highlighting the need for adaptive teaching models and long-term contingency planning in technical education.
- Open Access
- 3 June 2023
- Published by Universitat Politecnica de Valencia
- p. 421-433
Iluminación Mediante Aerogenerador Portátil con Capacitador para Bicicletas y Handbike
Iluminación Mediante Aerogenerador Portátil con Capacitador para Bicicletas y Handbike
- 3 June 2023
- Published by Universitat Politecnica de Valencia
- p. 421-433
Open AccessIluminación Mediante Aerogenerador Portátil con Capacitador para Bicicletas y Handbike
Iluminación Mediante Aerogenerador Portátil con Capacitador para Bicicletas y Handbike