Jitladda Sakdapipanich
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jitladda Sakdapipanich has a total of 76 co-authors. Here are the top co-authors by number of shared publications:
- Porntip Rojruthai
Division of Chemical Industrial Process and Environment, Faculty of Science, Energy and Environment, King Mongkut’s University of Technology North Bangkok, Rayong 21120, Thailand
10 shared publications Adun Nimpaiboon
Rubber Technology Research Centre (RTEC), Faculty of Science Mahidol University Nakhon Pathom Thailand
5 shared publications- Adun Nimpaiboon
Rubber Technology Research Centre (RTEC), Faculty of Science, Mahidol University, Nakhon Pathom 73170, Thailand
5 shared publications Manus Sriring
Department of Chemistry and Center of Excellence for Innovation in Chemistry, Faculty of Science Mahidol University Bangkok Thailand
5 shared publications- Sirirat Kumarn
Dep. Chem., Univ. Cambridge, Cambridge CB2 1EW, UK
4 shared publications - Chee Cheong Ho
Faculty of Science, University Tunku Abdul Rahman, Kajang, Malaysia
3 shared publications
Latest Publications
- 27 April 2026
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 27 (5) , 3342-3351
Deformation-Induced Morphology Evolution of Protein-Lipid Aggregates and Its Relationship with Mechanical Properties of Vulcanized Natural Rubber
The nonrubber components in natural rubber (NR), mainly proteins and lipids, are crucial for the outstanding comprehensive properties of NR through the formation of a naturally occurring network. However, how the morphology of nonrubber components changes during deformation and the effect of such changes on the mechanical properties of vulcanized NR remain unclear. Here, by using confocal laser scanning microscopy to track the morphology evolution of nonrubber components during deformation, the results reveal that the aggregates of proteins and lipids gradually disintegrate into smaller particles with increasing strain. This phenomenon represents the preferential collapse of a naturally occurring network under an externally applied load. Such a sacrificial characteristic of a naturally occurring network leads to energy dissipation, thereby enhancing the mechanical properties of vulcanized NR. The findings provide mechanistic insights into the structure-property relationship of NR, which can inspire the design of high-performance synthetic elastomers.
- 27 April 2026
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 27 (5) , 3342-3351
Deformation-Induced Morphology Evolution of Protein-Lipid Aggregates and Its Relationship with Mechanical Properties of Vulcanized Natural Rubber
The nonrubber components in natural rubber (NR), mainly proteins and lipids, are crucial for the outstanding comprehensive properties of NR through the formation of a naturally occurring network. However, how the morphology of nonrubber components changes during deformation and the effect of such changes on the mechanical properties of vulcanized NR remain unclear. Here, by using confocal laser scanning microscopy to track the morphology evolution of nonrubber components during deformation, the results reveal that the aggregates of proteins and lipids gradually disintegrate into smaller particles with increasing strain. This phenomenon represents the preferential collapse of a naturally occurring network under an externally applied load. Such a sacrificial characteristic of a naturally occurring network leads to energy dissipation, thereby enhancing the mechanical properties of vulcanized NR. The findings provide mechanistic insights into the structure-property relationship of NR, which can inspire the design of high-performance synthetic elastomers.
- 13 April 2026
- Published by Springer Nature in Polymer Bulletin
- Vol. 83 (7) , 354
Acrylamide-grafted saponified natural rubber via continuous UV irradiation for silica composites
- 13 April 2026
- Published by Springer Nature in Polymer Bulletin
- Vol. 83 (7) , 354
Acrylamide-grafted saponified natural rubber via continuous UV irradiation for silica composites
- Open Access
Effect of Proteins on the Network Formation and Degradation of Peroxide Cross-Linked Natural Rubber Elucidated by Time-Domain NMR
The importance of sustainable polymers has increased greatly in the last years since most polymers are derived from non-renewable sources. Sustainable polymers (i.e., biopolymers) such as natural rubber (NR) are proposed as a solution for this concern. A comparative study between NR and deproteinized NR (DPNR) was carried out to elucidate the role of proteins on the network formation and degradation of peroxide cross-linked NR using time-domain NMR experiments. The 1H multiple-quantum (MQ) NMR experiments provided information on the cross-link density and its spatial distribution, while the actual fraction of non-coupled network defects was obtained by exploiting the Hahn echo approach measured on swollen samples. The results showed that proteins influenced the network formation during the vulcanization process of NR, leading to a higher number of non-elastic network defects and promoting the creation of additional cross-links with a broader spatial distribution. The formation of network heterogeneities in different length scales deeply influences the mechanical properties of NR samples. On the other hand, the proteins showed a pro-oxidant activity on the degradation behavior by accelerating the degradation process of peroxide cross-linked NR.
Open AccessEffect of Proteins on the Network Formation and Degradation of Peroxide Cross-Linked Natural Rubber Elucidated by Time-Domain NMR
The importance of sustainable polymers has increased greatly in the last years since most polymers are derived from non-renewable sources. Sustainable polymers (i.e., biopolymers) such as natural rubber (NR) are proposed as a solution for this concern. A comparative study between NR and deproteinized NR (DPNR) was carried out to elucidate the role of proteins on the network formation and degradation of peroxide cross-linked NR using time-domain NMR experiments. The 1H multiple-quantum (MQ) NMR experiments provided information on the cross-link density and its spatial distribution, while the actual fraction of non-coupled network defects was obtained by exploiting the Hahn echo approach measured on swollen samples. The results showed that proteins influenced the network formation during the vulcanization process of NR, leading to a higher number of non-elastic network defects and promoting the creation of additional cross-links with a broader spatial distribution. The formation of network heterogeneities in different length scales deeply influences the mechanical properties of NR samples. On the other hand, the proteins showed a pro-oxidant activity on the degradation behavior by accelerating the degradation process of peroxide cross-linked NR.
- 12 December 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (24) , 11727-11737
Unveiling the Hierarchical Microstructure of Prevulcanized Natural Rubber Latex Film and Its Impact on Mechanical Properties
- 12 December 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (24) , 11727-11737
Unveiling the Hierarchical Microstructure of Prevulcanized Natural Rubber Latex Film and Its Impact on Mechanical Properties
- 21 October 2024
- Published by Springer Nature in Chinese Journal of Polymer Science
- Vol. 43 (1) , 70-82
Optimizing Sulfur Vulcanization for Enhanced Mechanical Performance of Hevea Latex-Dipped Film: Insights from AFM PeakForce Quantitative Nanomechanical Mapping
- 21 October 2024
- Published by Springer Nature in Chinese Journal of Polymer Science
- Vol. 43 (1) , 70-82
Optimizing Sulfur Vulcanization for Enhanced Mechanical Performance of Hevea Latex-Dipped Film: Insights from AFM PeakForce Quantitative Nanomechanical Mapping
- Open Access
- 30 July 2024
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 309 (12)
Unveiling the Hidden Networks: AFM Insights into Pre‐Vulcanized Hevea Latex and Its Profound Impact on Latex Film Mechanical Properties
Natural rubber (NR) films with different natural networks—concentrated NR (CNR), deproteinized NR (DPNR), and small rubber particles (SRP)—are investigated to explore the relationship between network structure and film properties using atomic force microscopy (AFM) in PeakForce Quantitative Nanomechanics (QNM) mode. Nitrogen content, gel content, and particle size distribution analyses reveal distinct network topologies in each latex type. Mechanical testing shows variations in tensile strength and crosslink density. AFM analysis provides insights into the crosslink network structures within the pre‐vulcanized latex film. It is found that DPNR and CNR films have a uniform distribution of crosslink networks, with DPNR exhibiting higher Young's modulus values. In contrast, SRP shows varying Young's modulus values, suggesting poor coalescence arising from a harder particle surface and a softer rubber core in an inhomogeneous network structure intrinsic to the non‐rubber components (NRCs) make‐up of SRP latex. This study highlights the pivotal role of natural network structures formed by NRCs in determining the ultimate properties of latex films, which has significant implications for the rubber industry, particularly in the production of latex‐dipped products, medical devices, and bioengineering applications.
- 30 July 2024
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 309 (12)
Open AccessUnveiling the Hidden Networks: AFM Insights into Pre‐Vulcanized Hevea Latex and Its Profound Impact on Latex Film Mechanical Properties
Natural rubber (NR) films with different natural networks—concentrated NR (CNR), deproteinized NR (DPNR), and small rubber particles (SRP)—are investigated to explore the relationship between network structure and film properties using atomic force microscopy (AFM) in PeakForce Quantitative Nanomechanics (QNM) mode. Nitrogen content, gel content, and particle size distribution analyses reveal distinct network topologies in each latex type. Mechanical testing shows variations in tensile strength and crosslink density. AFM analysis provides insights into the crosslink network structures within the pre‐vulcanized latex film. It is found that DPNR and CNR films have a uniform distribution of crosslink networks, with DPNR exhibiting higher Young's modulus values. In contrast, SRP shows varying Young's modulus values, suggesting poor coalescence arising from a harder particle surface and a softer rubber core in an inhomogeneous network structure intrinsic to the non‐rubber components (NRCs) make‐up of SRP latex. This study highlights the pivotal role of natural network structures formed by NRCs in determining the ultimate properties of latex films, which has significant implications for the rubber industry, particularly in the production of latex‐dipped products, medical devices, and bioengineering applications.
- Open Access
The Interplay of Protein Hydrolysis and Ammonia in the Stability of Hevea Rubber Latex during Storage
Natural rubber (NR) latex derived from Hevea brasiliensis is a complex colloid comprising mainly rubber hydrocarbons (latex particles) and a multitude of minor non-rubber constituents such as non-rubber particles, proteins, lipids, carbohydrates, and soluble organic and inorganic substances. NR latex is susceptible to enzymatic attack after it leaves the trees. It is usually preserved with ammonia and, to a lesser extent, with other preservatives to enhance its colloidal stability during storage. Despite numerous studies in the literature on the influence of rubber proteins on NR latex stability, issues regarding the effect of protein hydrolysis in the presence of ammonia on latex stability during storage are still far from resolved. The present work aims to elucidate the interplay between protein hydrolysis and ammoniation in NR latex stability. Both high- and low-ammonia (with a secondary preservative) NR latexes were used to monitor the changes in their protein compositions during storage. High-ammonia (FNR-A) latex preserved with 0.6% (v/v) ammonia, a low 0.1% ammonia/TMTD/ZnO (FNR-TZ) latex, and a deproteinized NR (PDNR) latex were labeled with fluorescence agents and observed using confocal laser scanning microscopy to determine their protein composition. Protein hydrolysis was confirmed via sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE). The results revealed that protein hydrolysis increased with the storage duration. The change in protein composition accompanying hydrolysis also allows the spatial distribution of allergenic proteins to be estimated in the latex. Concurrently, the latex stability increased with the storage duration, as measured by the latex’s mechanical stability time (MST) and the zeta potential of the latex particles. As monitored by AFM, the surface roughness of the NR latex film increased markedly during extended storage compared with that of the DPNR latex, which remained smooth. These results underscore the pivotal role of ammonia in bolstering NR latex stability brought on by protein hydrolysis, which greatly impacts latex film’s formation behavior. NR latex stability underpins the quality of latex-dipped goods during manufacturing, particularly those for medical gloves.
Open AccessThe Interplay of Protein Hydrolysis and Ammonia in the Stability of Hevea Rubber Latex during Storage
Natural rubber (NR) latex derived from Hevea brasiliensis is a complex colloid comprising mainly rubber hydrocarbons (latex particles) and a multitude of minor non-rubber constituents such as non-rubber particles, proteins, lipids, carbohydrates, and soluble organic and inorganic substances. NR latex is susceptible to enzymatic attack after it leaves the trees. It is usually preserved with ammonia and, to a lesser extent, with other preservatives to enhance its colloidal stability during storage. Despite numerous studies in the literature on the influence of rubber proteins on NR latex stability, issues regarding the effect of protein hydrolysis in the presence of ammonia on latex stability during storage are still far from resolved. The present work aims to elucidate the interplay between protein hydrolysis and ammoniation in NR latex stability. Both high- and low-ammonia (with a secondary preservative) NR latexes were used to monitor the changes in their protein compositions during storage. High-ammonia (FNR-A) latex preserved with 0.6% (v/v) ammonia, a low 0.1% ammonia/TMTD/ZnO (FNR-TZ) latex, and a deproteinized NR (PDNR) latex were labeled with fluorescence agents and observed using confocal laser scanning microscopy to determine their protein composition. Protein hydrolysis was confirmed via sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE). The results revealed that protein hydrolysis increased with the storage duration. The change in protein composition accompanying hydrolysis also allows the spatial distribution of allergenic proteins to be estimated in the latex. Concurrently, the latex stability increased with the storage duration, as measured by the latex’s mechanical stability time (MST) and the zeta potential of the latex particles. As monitored by AFM, the surface roughness of the NR latex film increased markedly during extended storage compared with that of the DPNR latex, which remained smooth. These results underscore the pivotal role of ammonia in bolstering NR latex stability brought on by protein hydrolysis, which greatly impacts latex film’s formation behavior. NR latex stability underpins the quality of latex-dipped goods during manufacturing, particularly those for medical gloves.
- Open Access
Preparation and Characterization of TiO2-Coated Hollow Glass Beads for Functionalization of Deproteinized Natural Rubber Latex via UVA-Activated Photocatalytic Degradation
The photochemical degradation of natural rubber (NR) is a prevalent method used to modify its inherent properties. Natural rubber, predominantly derived from the Hevea Brasiliensis tree, exhibits an exceptionally high molecular weight (MW), often reaching a million daltons (Da). This high MW restricts its solubility in various solvents and its reactivity with polar compounds, thereby constraining its versatile applications. In our previous work, we employed TiO2 in its powdered form as a photocatalyst for the functionalization of NR latex. However, the post-process separation and reuse of this powder present substantial challenges. In this present study, we aimed to functionalize deproteinized NR (DPNR) latex. We systematically reduced its MW via photochemical degradation under UVA irradiation facilitated by H2O2. To enhance the efficiency of the degradation process, we introduced TiO2-coated hollow glass beads (TiO2-HGBs) as photocatalysts. This approach offers the advantage of easy collection and repeated reuse. The modified DPNR showed a reduction in its number-average MW from 9.48 × 105 to 0.28 × 105 Da and incorporated functional groups, including hydroxyl, carbonyl, and epoxide. Remarkably, the TiO2-HGBs maintained their performance over seven cycles of reuse. Due to their superior efficacy, TiO2-HGBs stand out as promising photocatalysts for the advanced functionalization of NR across various practical applications.
Open AccessPreparation and Characterization of TiO2-Coated Hollow Glass Beads for Functionalization of Deproteinized Natural Rubber Latex via UVA-Activated Photocatalytic Degradation
The photochemical degradation of natural rubber (NR) is a prevalent method used to modify its inherent properties. Natural rubber, predominantly derived from the Hevea Brasiliensis tree, exhibits an exceptionally high molecular weight (MW), often reaching a million daltons (Da). This high MW restricts its solubility in various solvents and its reactivity with polar compounds, thereby constraining its versatile applications. In our previous work, we employed TiO2 in its powdered form as a photocatalyst for the functionalization of NR latex. However, the post-process separation and reuse of this powder present substantial challenges. In this present study, we aimed to functionalize deproteinized NR (DPNR) latex. We systematically reduced its MW via photochemical degradation under UVA irradiation facilitated by H2O2. To enhance the efficiency of the degradation process, we introduced TiO2-coated hollow glass beads (TiO2-HGBs) as photocatalysts. This approach offers the advantage of easy collection and repeated reuse. The modified DPNR showed a reduction in its number-average MW from 9.48 × 105 to 0.28 × 105 Da and incorporated functional groups, including hydroxyl, carbonyl, and epoxide. Remarkably, the TiO2-HGBs maintained their performance over seven cycles of reuse. Due to their superior efficacy, TiO2-HGBs stand out as promising photocatalysts for the advanced functionalization of NR across various practical applications.
- Open Access
Effect of Latex Purification and Accelerator Types on Rubber Allergens Prevalent in Sulphur Prevulcanized Natural Rubber Latex: Potential Application for Allergy-Free Natural Rubber Gloves
Natural rubber (NR) gloves manufactured from NR latex are widely utilized in various applications as a personal protective device due to their exceptional barrier characteristics in infection control. However, the use of NR gloves was associated with concerns on NR protein allergy. With comprehensive leaching procedures now a common practice in NR latex glove factories to eliminate latent rubber proteins and chemical allergens, occurrences and complaints of protein allergy from medical glove users have decreased drastically over the past two decades. The present work aims to eliminate further the residual rubber allergens in NR latex through effective purification of the NR latex and compounding the thus purified latex with an established formulation for allergy-free NR for glove applications. NR latex was purified by deproteinization and saponification, respectively. Several analytical techniques were used to verify rubber allergens eliminated in the purified latexes. Saponified NR (SPNR) latex was the purified NR latex of choice since it is devoid of allergenic proteins and poses the lowest risk of Type I allergy. The purified NR latex was compounded with zinc diethyldithiocarbamate (ZDEC), zinc dibutyldithiocarbamate (ZDBC), and zinc 2-mercaptobenzothiazole (ZMBT), respectively, for glove dipping. Among the investigated accelerators, only ZDBC was not detected in the artificial sweat that came into contact with the dipped articles. Thus, it is deduced that ZDBC poses the lowest risk of Type IV allergy to consumers. Additionally, the morphological and physical properties of dipped articles were assessed. It was revealed that the dipped film from the SPNR latex compounded with ZDBC provided thinner and less yellow products with a more uniform internal structure and a tensile strength comparable to those of commercial NR gloves.
Open AccessEffect of Latex Purification and Accelerator Types on Rubber Allergens Prevalent in Sulphur Prevulcanized Natural Rubber Latex: Potential Application for Allergy-Free Natural Rubber Gloves
Natural rubber (NR) gloves manufactured from NR latex are widely utilized in various applications as a personal protective device due to their exceptional barrier characteristics in infection control. However, the use of NR gloves was associated with concerns on NR protein allergy. With comprehensive leaching procedures now a common practice in NR latex glove factories to eliminate latent rubber proteins and chemical allergens, occurrences and complaints of protein allergy from medical glove users have decreased drastically over the past two decades. The present work aims to eliminate further the residual rubber allergens in NR latex through effective purification of the NR latex and compounding the thus purified latex with an established formulation for allergy-free NR for glove applications. NR latex was purified by deproteinization and saponification, respectively. Several analytical techniques were used to verify rubber allergens eliminated in the purified latexes. Saponified NR (SPNR) latex was the purified NR latex of choice since it is devoid of allergenic proteins and poses the lowest risk of Type I allergy. The purified NR latex was compounded with zinc diethyldithiocarbamate (ZDEC), zinc dibutyldithiocarbamate (ZDBC), and zinc 2-mercaptobenzothiazole (ZMBT), respectively, for glove dipping. Among the investigated accelerators, only ZDBC was not detected in the artificial sweat that came into contact with the dipped articles. Thus, it is deduced that ZDBC poses the lowest risk of Type IV allergy to consumers. Additionally, the morphological and physical properties of dipped articles were assessed. It was revealed that the dipped film from the SPNR latex compounded with ZDBC provided thinner and less yellow products with a more uniform internal structure and a tensile strength comparable to those of commercial NR gloves.
- 28 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (10) , 7061-7069
A Model Study of the Influence of the Natural Rubber (NR)- Endogenous Gel Fraction on the Rheological Performance of NR Using Synthetic Polyisoprene Rubber (IR) Blends with Different Ratios of Gel
- 28 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (10) , 7061-7069
A Model Study of the Influence of the Natural Rubber (NR)- Endogenous Gel Fraction on the Rheological Performance of NR Using Synthetic Polyisoprene Rubber (IR) Blends with Different Ratios of Gel