Jason A. Baker
Research Subjects
Jason A. Baker has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Amir M. H. Ibrahim
Department of Soil and Crop Science, Texas A&M University, College Station, TX 77843, USA
4 shared publications - Jackie C. Rudd
Texas A&M AgriLife Research and Extension Center, 6500 Amarillo Blvd. W., Amarillo, TX 79106, USA
4 shared publications - Qingwu Xue
Texas A&M AgriLife Research and Extension Center at Amarillo Amarillo Texas USA
4 shared publications - Shuyu Liu
Texas A&M AgriLife Research Amarillo Texas USA
4 shared publications - Shannon Baker
Texas A&M AgriLife High Plains Research and Extension Center, Canyon, TX 79015, USA
3 shared publications - Yahya Rauf
Texas A&M AgriLife High Plains Research and Extension Center, Canyon, TX 79015, USA
3 shared publications
Latest Publications
- Open Access
Genetic Variations and Epistatic Interactions for Agronomic and Yield Traits in Winter Wheat Population Derived from ‘TAM 204’ and ‘Iba’ Cultivars
Background: Improving grain yield in wheat remains a top priority, requiring integrated breeding and genetic strategies. This complexity poses a major challenge, driven by quantitative polygenic inheritance, environmental influence, and intricate genetic interactions. We investigated genetic factors and their interactions for agronomic and yield traits in two high-yielding winter wheat cultivars adapted to the US Southern Great Plains. Methods: A bi-parental mapping population consisting of 221 F7 recombinant inbred lines (RIL) derived from ‘TAM 204’ and ‘Iba’ was evaluated for three years in 11 Texas environments. Both parents and RIL population were genotyped on Illumina NovaSeq 6000 and sequences were aligned to IWGSC RefSeq v1.0 using Bowtie2 for SNP calling. For QTL analyses, each trait was analyzed by individual environment, across multiple environments and mega-environments. Results: A total of 86 QTL were mapped for five traits and among them 32 were consistent in more than one environment or analysis. Among consistent QTL, four were pleiotropic to more than one agronomic or yield traits mapped on chromosomes 2B (57.18, 59.47 Mb) and 2D (29.34, 40.64 Mb). The consistent QTL on chromosome 2D (29.34 Mb) was pleiotropic to GYLD, DTH, TW, TKW and explained maximum phenotypic variation for all traits, representing photoperiod gene (Ppd-D1). Another QTL on chromosome 2D (40.64 Mb) was pleiotropic to GYLD and TW and based on the physical position comparisons it likely reflects a unique locus in Iba. The pleiotropic consistent QTL Qgyld.tamu.2B.59 from TAM 204 represents Ppd-B1 gene. Moreover, it is more likely that Qdth.tamu.5B.575 represents the Vrn-B1 gene in Iba. A total of 23 digenic epistatic interactions involved consistent QTL for all traits. Amongst these, epistatic interactions between the consistent QTL on 2B (57.18 Mb) and 2D (29.34 Mb) were observed for GYLD, DTH and TKW. Conclusions: Our findings revealed key allelic diversity and interaction effects in elite wheat cultivars, paving the way for marker development for identified pleiotropic loci and implementation in marker-assisted selection and recombination breeding.
Open AccessGenetic Variations and Epistatic Interactions for Agronomic and Yield Traits in Winter Wheat Population Derived from ‘TAM 204’ and ‘Iba’ Cultivars
Background: Improving grain yield in wheat remains a top priority, requiring integrated breeding and genetic strategies. This complexity poses a major challenge, driven by quantitative polygenic inheritance, environmental influence, and intricate genetic interactions. We investigated genetic factors and their interactions for agronomic and yield traits in two high-yielding winter wheat cultivars adapted to the US Southern Great Plains. Methods: A bi-parental mapping population consisting of 221 F7 recombinant inbred lines (RIL) derived from ‘TAM 204’ and ‘Iba’ was evaluated for three years in 11 Texas environments. Both parents and RIL population were genotyped on Illumina NovaSeq 6000 and sequences were aligned to IWGSC RefSeq v1.0 using Bowtie2 for SNP calling. For QTL analyses, each trait was analyzed by individual environment, across multiple environments and mega-environments. Results: A total of 86 QTL were mapped for five traits and among them 32 were consistent in more than one environment or analysis. Among consistent QTL, four were pleiotropic to more than one agronomic or yield traits mapped on chromosomes 2B (57.18, 59.47 Mb) and 2D (29.34, 40.64 Mb). The consistent QTL on chromosome 2D (29.34 Mb) was pleiotropic to GYLD, DTH, TW, TKW and explained maximum phenotypic variation for all traits, representing photoperiod gene (Ppd-D1). Another QTL on chromosome 2D (40.64 Mb) was pleiotropic to GYLD and TW and based on the physical position comparisons it likely reflects a unique locus in Iba. The pleiotropic consistent QTL Qgyld.tamu.2B.59 from TAM 204 represents Ppd-B1 gene. Moreover, it is more likely that Qdth.tamu.5B.575 represents the Vrn-B1 gene in Iba. A total of 23 digenic epistatic interactions involved consistent QTL for all traits. Amongst these, epistatic interactions between the consistent QTL on 2B (57.18 Mb) and 2D (29.34 Mb) were observed for GYLD, DTH and TKW. Conclusions: Our findings revealed key allelic diversity and interaction effects in elite wheat cultivars, paving the way for marker development for identified pleiotropic loci and implementation in marker-assisted selection and recombination breeding.
- Open Access
Association Mapping for Biomass and Kernel Traits in Doubled-Haploid Population Derived from Texas Wheat Cultivars
Background: Genetic improvement in wheat yield is the most focused research area for the breeding community to ensure sustainable production. Wheat kernel traits and biomass are considered key contributors to enhance crop yield. Methods: This study was designed to explore the genetic diversity of kernel and biomass traits in popular wheat varieties from the US Southern Great Plains using 264 doubled haploid (DH) lines mainly derived from TAM 114 or TAM 204. This population was evaluated in two field environments planted in alpha lattice design during the 2020 crop season. Kernel traits were collected using the hp Scanjet G4010 photo scanner for image capturing and GrainScan v3. software for image analysis. Biomass parameters were collected and processed manually. For genotyping genomic libraries were prepared and sequenced on Illumina NovaSeq 6000 to generate paired end reads of 150 bp. Sequences were aligned to the IWGSC RefSeq genome assembly v2.1 using the Burrows Wheeler Aligner for SNP calling. Results: A total of 59,482 polymorphic SNP markers were retained for genetic analysis after the filtration at 50% missing data and 5% minor allele frequency. To investigate the marker–trait association and the genomic regions, four genome-wide association study models were implemented using the R package GAPIT version 3.5. Based on the Bonferroni correction −7 was used as a threshold to declare marker-trait associations (MTAs) significant. The BLINK model identified 12 MTAs on chromosomes 1A, 2A, 2B, 4A, 4B, and 6B. Conclusions: The identified MTAs can be used to develop diagnostic markers for efficient selection and utilization in recombination breeding and cultivar development process.
Open AccessAssociation Mapping for Biomass and Kernel Traits in Doubled-Haploid Population Derived from Texas Wheat Cultivars
Background: Genetic improvement in wheat yield is the most focused research area for the breeding community to ensure sustainable production. Wheat kernel traits and biomass are considered key contributors to enhance crop yield. Methods: This study was designed to explore the genetic diversity of kernel and biomass traits in popular wheat varieties from the US Southern Great Plains using 264 doubled haploid (DH) lines mainly derived from TAM 114 or TAM 204. This population was evaluated in two field environments planted in alpha lattice design during the 2020 crop season. Kernel traits were collected using the hp Scanjet G4010 photo scanner for image capturing and GrainScan v3. software for image analysis. Biomass parameters were collected and processed manually. For genotyping genomic libraries were prepared and sequenced on Illumina NovaSeq 6000 to generate paired end reads of 150 bp. Sequences were aligned to the IWGSC RefSeq genome assembly v2.1 using the Burrows Wheeler Aligner for SNP calling. Results: A total of 59,482 polymorphic SNP markers were retained for genetic analysis after the filtration at 50% missing data and 5% minor allele frequency. To investigate the marker–trait association and the genomic regions, four genome-wide association study models were implemented using the R package GAPIT version 3.5. Based on the Bonferroni correction −7 was used as a threshold to declare marker-trait associations (MTAs) significant. The BLINK model identified 12 MTAs on chromosomes 1A, 2A, 2B, 4A, 4B, and 6B. Conclusions: The identified MTAs can be used to develop diagnostic markers for efficient selection and utilization in recombination breeding and cultivar development process.
- Open Access
- 29 July 2025
- Published by MDPI AG in Preprints.org
Association Mapping for Biomass and Kernel Traits in Doubled Haploid Population Derived from Texas Wheat Cultivars
Genetic improvement in wheat yield is the most focused research area for the breeding community to ensure food security and sustainable production. Wheat kernel traits and biomass are considered key contributors to enhance crop yield. A set of 264 doubled haploid (DH) lines mainly derived from two popular Texas wheat cultivars, TAM 114 and TAM 204, were developed at the AgriLife Research Center in Amarillo. The other parents are widely adopted and improved cultivars from the Southern Great Plains. Lines were evaluated in two field environments (Bushland-irrigated & Bush-land-dryland) planted in alpha lattice design during the 2020 crop season. Kernel traits (seed length, width, area, perimeter, and 1000 kernel weight) were collected using the hp Scanjet G4010 photo scanner for image capturing and GrainScan software for image analysis. This procedure offered a high throughput, precise, robust, and cost-effective seed phenotyping platform. Biomass parameters (plant weight, head count, head weight) were collected and processed manually. For genotyping genomic libraries were prepared and sequenced on Illumina NovaSeq 6000 to generate paired end reads of 150 bp. For single nucleotide polymorphism (SNP) calling, sequences were aligned to the IWGSC RefSeq genome assembly v2.1 using the Burrows Wheeler Aligner. The SNP filtration was performed at 50% missing data and 5% minor allele frequency. Finally, a set of 59842 polymorphic markers were retained for genetic analysis. To investigate the marker-trait association and the genomic regions, four genome-wide-association study (GWAS) models were implemented using the R package ‘Genome Association and Prediction Integrated Tool’ (GAPIT). Based on the Bonferroni correction < 8.41E-07 was used as a threshold to declare maker trait associations (MTA) significant. The BLINK model identified 12 MTA on chromosomes 1A, 2A, 2B, 4A, 4B, and 6B. 45% of the lines carried S2A_251496962 marker for the seed perimeter, while 42% and 39% lines carried S2A_498737202 and S2B_792756832 makers for 1000 KW and seed width, respectively. The identified MTA might be representing some known/major genes which need fur-ther confirmation.
- 29 July 2025
- Published by MDPI AG in Preprints.org
Open AccessAssociation Mapping for Biomass and Kernel Traits in Doubled Haploid Population Derived from Texas Wheat Cultivars
Genetic improvement in wheat yield is the most focused research area for the breeding community to ensure food security and sustainable production. Wheat kernel traits and biomass are considered key contributors to enhance crop yield. A set of 264 doubled haploid (DH) lines mainly derived from two popular Texas wheat cultivars, TAM 114 and TAM 204, were developed at the AgriLife Research Center in Amarillo. The other parents are widely adopted and improved cultivars from the Southern Great Plains. Lines were evaluated in two field environments (Bushland-irrigated & Bush-land-dryland) planted in alpha lattice design during the 2020 crop season. Kernel traits (seed length, width, area, perimeter, and 1000 kernel weight) were collected using the hp Scanjet G4010 photo scanner for image capturing and GrainScan software for image analysis. This procedure offered a high throughput, precise, robust, and cost-effective seed phenotyping platform. Biomass parameters (plant weight, head count, head weight) were collected and processed manually. For genotyping genomic libraries were prepared and sequenced on Illumina NovaSeq 6000 to generate paired end reads of 150 bp. For single nucleotide polymorphism (SNP) calling, sequences were aligned to the IWGSC RefSeq genome assembly v2.1 using the Burrows Wheeler Aligner. The SNP filtration was performed at 50% missing data and 5% minor allele frequency. Finally, a set of 59842 polymorphic markers were retained for genetic analysis. To investigate the marker-trait association and the genomic regions, four genome-wide-association study (GWAS) models were implemented using the R package ‘Genome Association and Prediction Integrated Tool’ (GAPIT). Based on the Bonferroni correction < 8.41E-07 was used as a threshold to declare maker trait associations (MTA) significant. The BLINK model identified 12 MTA on chromosomes 1A, 2A, 2B, 4A, 4B, and 6B. 45% of the lines carried S2A_251496962 marker for the seed perimeter, while 42% and 39% lines carried S2A_498737202 and S2B_792756832 makers for 1000 KW and seed width, respectively. The identified MTA might be representing some known/major genes which need fur-ther confirmation.
- Open Access
Genetic Mapping of Quantitative Trait Loci for End-Use Quality and Grain Minerals in Hard Red Winter Wheat
To meet the demands of different wheat-based food products, traits related to end-use quality become indispensable components in wheat improvement. Thus, markers associated with these traits are valuable for the timely evaluation of protein content, kernel physical characteristics, and rheological properties. Hereunder, we report the mapping results of quantitative trait loci (QTLs) linked to end-use quality traits. We used a dense genetic map with 5199 SNPs from a 90K array based on a recombinant inbred line (RIL) population derived from ‘CO960293-2’/‘TAM 111’. The population was evaluated for flour protein concentration, kernel characteristics, dough rheological properties, and grain mineral concentrations. An inclusive composite interval mapping model for individual and across-environment QTL analyses revealed 22 consistent QTLs identified in two or more environments. Chromosomes 1A, 1B, and 1D had clustered QTLs associated with rheological parameters. Glu-D1 loci from CO960293-2 and either low-molecular-weight glutenin subunits or gliadin loci on 1A, 1B, and 1D influenced dough mixing properties substantially, with up to 34.2% of the total phenotypic variation explained (PVE). A total of five QTLs associated with grain Cd, Co, and Mo concentrations were identified on 3B, 5A, and 7B, explaining up to 11.6% of PVE. The results provide important genetic resources towards understanding the genetic bases of end-use quality traits. Information about the novel and consistent QTLs provided solid foundations for further characterization and marker designing to assist selections for end-use quality improvements.
Open AccessGenetic Mapping of Quantitative Trait Loci for End-Use Quality and Grain Minerals in Hard Red Winter Wheat
To meet the demands of different wheat-based food products, traits related to end-use quality become indispensable components in wheat improvement. Thus, markers associated with these traits are valuable for the timely evaluation of protein content, kernel physical characteristics, and rheological properties. Hereunder, we report the mapping results of quantitative trait loci (QTLs) linked to end-use quality traits. We used a dense genetic map with 5199 SNPs from a 90K array based on a recombinant inbred line (RIL) population derived from ‘CO960293-2’/‘TAM 111’. The population was evaluated for flour protein concentration, kernel characteristics, dough rheological properties, and grain mineral concentrations. An inclusive composite interval mapping model for individual and across-environment QTL analyses revealed 22 consistent QTLs identified in two or more environments. Chromosomes 1A, 1B, and 1D had clustered QTLs associated with rheological parameters. Glu-D1 loci from CO960293-2 and either low-molecular-weight glutenin subunits or gliadin loci on 1A, 1B, and 1D influenced dough mixing properties substantially, with up to 34.2% of the total phenotypic variation explained (PVE). A total of five QTLs associated with grain Cd, Co, and Mo concentrations were identified on 3B, 5A, and 7B, explaining up to 11.6% of PVE. The results provide important genetic resources towards understanding the genetic bases of end-use quality traits. Information about the novel and consistent QTLs provided solid foundations for further characterization and marker designing to assist selections for end-use quality improvements.