JOJaroslav Odrobiňák

Jaroslav Odrobiňák

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jaroslav Odrobiňák has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    On the Load-Carrying Capacity Determination of Railway Box-Girder Bridges Using the Reduced Stress Method

    by Jaroslav Odrobiňák, Josef Vičan, Richard Hlinka, Jozef Prokop, Branislav Vavák

    This paper investigates the load-carrying capacity of existing railway box-girder bridges through a comprehensive analytical approach. The reduced stress method is utilized, which determines stress limits for stiffened and unstiffened plates under combined loading conditions. This method offers an alternative to the traditional effective width approach used for plated structural elements. The paper presents three case studies, demonstrating the integration of global analysis using 2D finite element models, linear buckling analysis of plate/shell structure, and the verification of planar elements via the reduced stress method. The proposed procedure enables more realistic estimations of the load capacity of planar elements by accounting for the complex stress distributions within the panels, thereby enhancing the accuracy of structural assessments, especially details.


  • Open Access

    Influence of Rolling Direction on Barkhausen Noise in Low-Alloyed Steel MC500

    by Radoslav Koňár, Branislav Vavák, Mária Čilliková, Katarína Zgútová, Miroslav Neslušan, Jaroslav Odrobiňák

    This study examines the impact of rolling direction on Barkhausen noise emission from the low-alloyed steel MC 500 during a uniaxial tensile test. The samples of gauged shape were cut along both the rolling and transverse directions to investigate the process of magnetic anisotropy alterations, as expressed in terms of Barkhausen noise and the extracted features. Barkhausen noise was studied as a function of both elastic and plastic straining (up to plastic strain 21.5%), and the role of domain wall realignment with respect to the rolling direction, as well as the direction of the tensile load, was analysed. Barkhausen noise emission is linked to both the stress state and the microstructure, and the role of external stressing is contrasted with the residual stress state. Barkhausen noise is measured directly during a tensile test (in situ) as well as after unloading (ex situ). It was found that Barkhausen noise is significantly affected by stress directly during the tensile test (in situ), whereas the contribution of residual stresses is less pronounced. Barkhausen noise measured in situ during the tensile test in the direction of the tensile load is higher (about 1100 mV) compared to the transverse direction (about 500 mV). However, this relationship is reversed for the ex situ measurements, especially for the more developed plastic strains above 15%. The influence of rolling direction on Barkhausen noise is relatively minor, and Barkhausen noise after matrix yielding is primarily affected by increasing dislocation density growing from 3 × 1015 up to 5 × 1015 m−2.


  • Open Access

    Influence of Rolling Direction on Barkhausen Noise in Bridges Construction Made of MC500 Steel

    by Radoslav Koňár, Branislav Vavák, Mária Čilliková, Katarína Zgútová, Miroslav Neslušan, Jaroslav Odrobiňák

    This study examines the impact of rolling direction on Barkhausen noise emission from the low-alloyed steel MC 500 during a uniaxial tensile test. The samples of gauged shape were cut along both the rolling and transverse directions to investigate the process of magnetic anisotropy alterations, as expressed in terms of Barkhausen noise and the extracted features. Barkhausen noise was studied as a function of both elastic and plastic straining, and the role of domain wall realignment with respect to the rolling direction, as well as the direction of the tensile load, was analysed. Barkhausen noise emission is linked to both the stress state and the microstructure, and the role of external stressing is contrasted with the residual stress state. Barkhausen noise in measured directly during tensile test (in situ) as well as after unloading (post situ). It was found that Barkhausen noise is significantly affected by stress directly during the tensile test (in situ), whereas the contribution of residual stresses is less pronounced. Barkhausen noise measured in situ during the tensile test in the direction of the tensile load is higher compared to the transverse direction. However, this relationship is reversed for the post situ measurements, especially for the more developed plastic strains. The influence of rolling direction on Barkhausen noise is relatively minor, and Barkhausen noise after matrix yielding is primarily affected by increasing dislocation density.


  • Open Access

    On the Shear Force Redistribution in Composite Steel and Concrete Beams with Web Openings

    by Jakub Bartus, Jaroslav Odrobinak

    As far as research into the field of composite steel and concrete beams with web openings has shown, the initiation of a complex stress state due to the introduction of web openings is, unfortunately, inevitable. As a logical consequence, estimation of the resistance becomes complex as well. Aiming to provide a more convenient approach, especially for evaluation of the bending resistance to the Vierendeel effect with the presence of high shear forces, a marked simplification with respect to quantification of the shear force redistribution between T-sections is presented. This novel approach stands on strong fundamentals of experimental evidence and parametric finite element (FE) investigation. Concretely, within the experimental part of this investigation, the load response of four composite beam samples was recorded and profoundly analyzed. Subsequently, a detailed FE analysis in the software ANSYS 2024 R1 (ANSYS Inc., Canonsburg, PA, USA), exploiting its parametric design language (APDL), was conducted. Finally, concise data compilation and their comprehensible interpretation were enabled by employing the software MATLAB 2024a (The MathWorks, Inc., Natick, MA, USA). In view of this treatment, a cornerstone for successive assessment of the obtained data was laid. Attempting to identify the key factors influencing the shear force proportion between the tees, integration of the shear stresses along the vertical sections with regular spacing along the FE beam models was conducted. By virtue of this concept, not only the magnitudes of the shear forces for the tees were obtained but also the leading importance of the opening depth was demonstrated. Furthermore, a complete picture of the shear force behavior along the composite perforated beams was derived. On this basis, a novel method representing a simpler and more accurate form of estimation of the shear force proportion for T-sections was proposed.


  • Open Access

    Experimental and Numerical Analyses of Timber–Steel Footbridges

    by Jozef Gocál, Josef Vičan, Jaroslav Odrobiňák, Richard Hlinka, František Bahleda, Agnieszka Wdowiak-Postulak

    In addition to traditional building materials, such as steel and concrete, wood has been gaining increasing prominence in recent years. In the past, the use of wood was limited due to its susceptibility to damage by fungi, insects, and temperature. These shortcomings were gradually eliminated as the quality of wood processing increased and thanks to modern high-quality insulating and protective materials. The return to the utilisation of this natural building material was also supported by the development of new wood-based materials, such as glued laminated wood, and new types of mechanical fasteners, as well as by the introduction of new design methods provided in the Eurocodes. Within this context, this paper focuses on using wood in transport infrastructure, especially as the basic material for footbridges and small road bridges. Combined timber–steel bridges emerge as a very effective type of superstructure in contemporary road bridges and footbridges, especially in areas with natural exposure. Usually, wood is used for the main bridge girders, while steel is preferred for bridge deck elements—stringers and cross-girders. The results of this parametric study offer optimal structural solutions for footbridges with spans of 12.0–24.0 m, reflecting satisfactory static and dynamic footbridge behaviour. Particular attention is paid to a problematic structural detail—the connection between the steel cross-girder and the timber main girder. Firstly, this connection’s characteristics were measured experimentally using nine laboratory samples made of two glued laminated timber blocks, simulating main girders connected with a hot-rolled steel cross-girder. The connection was prepared in three variants, with different heights of the end plates and different numbers of bolts. Subsequently, these characteristics were computed using two numerical FEM models. The first model was created using SCIA Engineer software with a combination of shell and beam finite elements. The second, more sophisticated model was created in the ANSYS software environment using 3D finite elements, allowing us to better take into account the plasticity and orthotropic properties of wood and the points of contact between the individual members. Finally, the experimental results produced by sample testing in the laboratory were compared to the outputs of FEM numerical studies.


  • Open Access

    Investigation of Actual In-Plane Geometric Imperfections of Steel Tied-Arch Bridges

    by Matúš Farbák, Jakub Chromčák, Dáša Bačová, Jaroslav Odrobiňák

    The complex global analysis of the steel tied-arch bridges may require specific data in some cases, e.g., residual stress or real geometrical imperfections. The presented research is focused on the investigation of the actual in-plane shape of the steel tied-arch bridges. To obtain the actual shapes of the arches of existing bridges, 3D terrestrial laser scanning was applied. Data were then investigated as a group in order to find the relationship within the tied-arch bridges’ vertical imperfections. Firstly, the detailed surveyed points in the selected position were mathematically determined to estimate the measured data. The next step included the creation of curves presenting the real shape of the bridges’ arches course using numerical modelling. After the pre-programming, the calculations and related numerical modelling were performed in the Matlab environment. These modelled arch-bridges courses were approximated by using regression analysis. The approximating curves from the regression analysis represent the theoretical course of the arches. The difference between the theoretical shape and the processed measured values may be presented as the examined in-plane imperfections. Subsequently, the paper presents comparisons from the evaluation of the individual imperfections on the investigated bridges and a comparison of the measurement with the standardised shape of the imperfections.


  • Open Access

    On FE modeling techniques of concrete in steel and concrete composite members

    by Jakub Bartus, Jaroslav Odrobinak

    The paper presents a nonlinear 3D model analysis of composite steel-concrete beams with web openings using the Finite Element Method (FEM). The core of the stud

  • Diagnostics and Evaluation of Selected Concrete Vaulted Rail Bridges

    by Patrik Kotula, Peter Koteš, Jaroslav Odrobinak, Jozef Prokop

    The paper deals with diagnostics, recalculation, and determination of the current load capacity of three concrete arch bridges on the original railway line Bratislava - Žilina. This was built in 1954 in connection with the relocation of the line, caused by the exhibition of the Nosice reservoir. At present, the railway line has been relocated to a new location and the existing original line, including the existing engineering facilities, will be used for the construction of a new road connecting the district towns of Púchov and Považská Bystrica. The task was solved within the cooperation of Faculty of Civil Engineering with the Railways of the Slovak Republic (ŽSR in Slovak) and the Research and Development Institute of Railways (VVÚŽ in Slovak). The conclusions from the recalculations and the subsequently determined load capacity show that the bridge structures in question are suitable for further use, however, their reconstruction is necessary.

  • Open Access

    Load-Carrying Capacity of Bailey Bridge in Civil Applications

    by Jozef Prokop, Jaroslav Odrobiňák, Matúš Farbák, Vladimír Novotný

    The paper presents an extensive study aimed to determine the applicability of the demountable Bailey bridge (BB) system on construction sites or in other temporary conditions while meeting the regulations for the design and assessment of steel bridges. The analysis is focused on whether and to what extent the BB system with spans between 12 and 36 m is usable for on-site freight transport with conventional lorries with a total weight of up to 22–28 tons. At the same time, the BB system within these spans should be utilized for construction vehicles with a total weight of up to 32–40 tons. To calculate the load-carrying capacity, spatial numerical models were analysed using FEM and procedures of actual design codes were utilized. In the case of the main girders, analysis is focused on the out-of-plane stability of their compressed chords. Recommendations for the use of this bridge system in different arrangements of the main girder and bridge deck are then summarized and discussed.