Bastian Lehrheuer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bastian Lehrheuer has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Stefan Pischinger
Chair of Thermodynamics of Mobile Energy Conversion Systems (TME), RWTH Aachen University, 52074 Aachen, Germany
5 shared publications Stefan Pischinger
4 shared publications- Patrick Burkardt
Chair of Thermodynamics of Mobile Energy Conversion Systems, RWTH Aachen University, Germany
3 shared publications - Simon Völker
Institute of Technical Thermodynamics, RWTH Aachen University, Aachen, Germany
3 shared publications - Alexander Mitsos
RWTH Aachen University
2 shared publications - André Bardow
Energy & Process Systems Engineering, Department of Mechanical and Process Engineering, ETH Zurich, Tannenstrasse 3, 8092 Zurich, Switzerland
2 shared publications
Latest Publications
- Open Access
- 30 December 2024
- Published by Elsevier in Applied Thermal Engineering
- Vol. 263
Controlled autoignition inside an active pre-chamber using alternative fuels
- 30 December 2024
- Published by Elsevier in Applied Thermal Engineering
- Vol. 263
Open AccessControlled autoignition inside an active pre-chamber using alternative fuels
- Top Cited PapersOpen Access
- 8 July 2024
- Published by Springer Nature in Nature Energy
- Vol. 9 (10) , 1220-1229
Towards carbon-neutral and clean propulsion in heavy-duty transportation with hydroformylated Fischer–Tropsch fuels
Clean transport requires tailored energy carriers. For heavy-duty transportation, synthetic fuels are promising but must fulfil the key challenges of achieving carbon neutrality while reducing air pollution and ensuring scalability through compatibility with existing infrastructure. Here we show that hydroformylated Fischer–Tropsch (HyFiT) fuels composed of optimized alkane–alcohol blends simultaneously address these challenges. First, the design of the HyFiT fuel process flexibly closes the carbon cycle by employing biomass or carbon dioxide as feedstock, while being scalable through mature technologies. Second, fuel testing shows that HyFiT fuels comply with global fuel standards. Material compatibility is demonstrated for two standard sealing materials, enabling the retrofit of today’s vehicle fleets. Third, vehicle testing shows that HyFiT fuels substantially reduce combustion-induced particulate matter and nitrogen oxides. Fourth, a well-to-wheel life cycle assessment finds that HyFiT fuels enable the transition to net-zero greenhouse gas emissions, showing simultaneously a favourable profile in other environmental parameters. HyFiT fuels can thus complement electrification for heavy-duty transportation.
- 8 July 2024
- Published by Springer Nature in Nature Energy
- Vol. 9 (10) , 1220-1229
Top Cited PapersOpen AccessTowards carbon-neutral and clean propulsion in heavy-duty transportation with hydroformylated Fischer–Tropsch fuels
Clean transport requires tailored energy carriers. For heavy-duty transportation, synthetic fuels are promising but must fulfil the key challenges of achieving carbon neutrality while reducing air pollution and ensuring scalability through compatibility with existing infrastructure. Here we show that hydroformylated Fischer–Tropsch (HyFiT) fuels composed of optimized alkane–alcohol blends simultaneously address these challenges. First, the design of the HyFiT fuel process flexibly closes the carbon cycle by employing biomass or carbon dioxide as feedstock, while being scalable through mature technologies. Second, fuel testing shows that HyFiT fuels comply with global fuel standards. Material compatibility is demonstrated for two standard sealing materials, enabling the retrofit of today’s vehicle fleets. Third, vehicle testing shows that HyFiT fuels substantially reduce combustion-induced particulate matter and nitrogen oxides. Fourth, a well-to-wheel life cycle assessment finds that HyFiT fuels enable the transition to net-zero greenhouse gas emissions, showing simultaneously a favourable profile in other environmental parameters. HyFiT fuels can thus complement electrification for heavy-duty transportation.
- Open Access
Molecularly-controlled high swirl combustion system for ethanol/1-octanol dual fuel combustion
- Open Access
- 21 March 2022
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 6 (8) , 1959-1973
Blend for all or pure for few? Well-to-wheel life cycle assessment of blending electricity-based OME 3–5 with fossil diesel
Using life cycle assessment, we explore the conditions under which a fleet-wide blending of OME 3–5 with fossil diesel can reduce environmental impacts in terms of CO 2 , NO x , and soot emissions.
- 21 March 2022
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 6 (8) , 1959-1973
Open AccessBlend for all or pure for few? Well-to-wheel life cycle assessment of blending electricity-based OME 3–5 with fossil diesel
Using life cycle assessment, we explore the conditions under which a fleet-wide blending of OME 3–5 with fossil diesel can reduce environmental impacts in terms of CO 2 , NO x , and soot emissions.
- 14 December 2021
- Published by Springer Nature
- p. 205-231
On the Use of Active Pre-chambers and Bio-hybrid Fuels in Internal Combustion Engines
- 14 December 2021
- Published by Springer Nature
- p. 205-231
On the Use of Active Pre-chambers and Bio-hybrid Fuels in Internal Combustion Engines
- Open Access
- 8 October 2021
- Published by Wiley in ChemSusChem
- Vol. 14 (23) , 5254-5264
Designed to Be Green, Economic, and Efficient: A Ketone‐Ester‐Alcohol‐Alkane Blend for Future Spark‐Ignition Engines
Model‐based fuel design can tailor fuels to advanced engine concepts while minimizing environmental impact and production costs. A rationally designed ketone‐ester‐alcohol‐alkane (KEAA) blend for high efficiency spark‐ignition engines was assessed in a multi‐disciplinary manner, from production cost to ignition characteristics, engine performance, ecotoxicity, microbial storage stability, and carbon footprint. The comparison included RON 95 E10, ethanol, and two previously designed fuels. KEAA showed high indicated efficiencies in a single‐cylinder research engine. Ignition delay time measurements confirmed KEAA's high auto‐ignition resistance. KEAA exhibits a moderate toxicity and is not prone to microbial infestation. A well‐to‐wheel analysis showed the potential to lower the carbon footprint by 95 percent compared to RON 95 E10. The findings motivate further investigations on KEAA and demonstrate advancements in model‐based fuel design.
- 8 October 2021
- Published by Wiley in ChemSusChem
- Vol. 14 (23) , 5254-5264
Open AccessDesigned to Be Green, Economic, and Efficient: A Ketone‐Ester‐Alcohol‐Alkane Blend for Future Spark‐Ignition Engines
Model‐based fuel design can tailor fuels to advanced engine concepts while minimizing environmental impact and production costs. A rationally designed ketone‐ester‐alcohol‐alkane (KEAA) blend for high efficiency spark‐ignition engines was assessed in a multi‐disciplinary manner, from production cost to ignition characteristics, engine performance, ecotoxicity, microbial storage stability, and carbon footprint. The comparison included RON 95 E10, ethanol, and two previously designed fuels. KEAA showed high indicated efficiencies in a single‐cylinder research engine. Ignition delay time measurements confirmed KEAA's high auto‐ignition resistance. KEAA exhibits a moderate toxicity and is not prone to microbial infestation. A well‐to‐wheel analysis showed the potential to lower the carbon footprint by 95 percent compared to RON 95 E10. The findings motivate further investigations on KEAA and demonstrate advancements in model‐based fuel design.
- Open Access
- 4 October 2020
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 22 (9) , 2945-2957
Study of the engine configuration effect on the maximum achievable load in CAI using water injection
The approach of this research is to enlarge the knowledge about the methodologies to increase the maximum achievable load degree in the context of gasoline CAI engines. This work is the continuation of a previous work related to the study of the water injection effect on combustion, where this strategy was approached. The operating strategies to introduce the water and the interconnected settings were deeply analyzed in order to optimize combustion and to evaluate its potential to increase the maximum load degree when operating in CAI. During these initial tests, the engine was configured to enhance the mixture autoignition. The compression ratio was high compared to a standard gasoline engine, and suitable fuel injection strategies were selected based on previous studies from the authors to maximize the reactivity of the mixture, and get a stable CAI operation. Once water injection proved to provide encouraging results, the next step dealt in this work, was to go deeper and explore its effects when the engine configuration is more similar to a conventional gasoline engine, trying to get CAI combustion closer to production engines. This means, mainly, lower compression ratios and different fuel injection strategies, which hinders CAI operation. Finally, since all the previous works were performed at constant engine speed, the engine speed was also modified in order to see the applicability of the defined strategies to operate under CAI conditions at other operating conditions. The results obtained show that all these modifications are compatible with CAI operation: the required compression ratio can be reduced, in some cases the injection strategies can be simplified, and the increase of the engine speed leads to better conditions for CAI combustion. Thanks to the analysis of all this data, the different key parameters to manage this combustion mode are identified and shown in the paper.
- 4 October 2020
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 22 (9) , 2945-2957
Open AccessStudy of the engine configuration effect on the maximum achievable load in CAI using water injection
The approach of this research is to enlarge the knowledge about the methodologies to increase the maximum achievable load degree in the context of gasoline CAI engines. This work is the continuation of a previous work related to the study of the water injection effect on combustion, where this strategy was approached. The operating strategies to introduce the water and the interconnected settings were deeply analyzed in order to optimize combustion and to evaluate its potential to increase the maximum load degree when operating in CAI. During these initial tests, the engine was configured to enhance the mixture autoignition. The compression ratio was high compared to a standard gasoline engine, and suitable fuel injection strategies were selected based on previous studies from the authors to maximize the reactivity of the mixture, and get a stable CAI operation. Once water injection proved to provide encouraging results, the next step dealt in this work, was to go deeper and explore its effects when the engine configuration is more similar to a conventional gasoline engine, trying to get CAI combustion closer to production engines. This means, mainly, lower compression ratios and different fuel injection strategies, which hinders CAI operation. Finally, since all the previous works were performed at constant engine speed, the engine speed was also modified in order to see the applicability of the defined strategies to operate under CAI conditions at other operating conditions. The results obtained show that all these modifications are compatible with CAI operation: the required compression ratio can be reduced, in some cases the injection strategies can be simplified, and the increase of the engine speed leads to better conditions for CAI combustion. Thanks to the analysis of all this data, the different key parameters to manage this combustion mode are identified and shown in the paper.